HomeMy WebLinkAboutLABORATORY TEST RESULTS� rat
�� r
l�
_- --CONSTRUCTION-MATERIALS
TECHNOLOGIES
LABORATORY TEST RESULTS SCq
St 4Uc a),
e �Duh
Report for: Woodland Industries
1520 Kalamazoo Drive
Griffin, GA 30224
Attention: Bill Ward
Product Name(s): No. 30
Manufacturer: Woodland Industries
PRI-CMT Project No.: WII-008-02-03
Source: Woodland Industries
Date Received: May 12, 2017
Sep. 13, 2017
Dates Tested: May 16 — Sep. 15, 2017
Purpose: Evaluate No. 30 for compliance with the physical properties of A§TM D 226
Asphalt -Saturated Felt Used in Roofing and Waterproofing, Type II.
Test Methods: Testing was completed as described in ASTM D 226-09: Standard Specification
for Asphalt -Saturated Organic Felt Used in Roofing and Waterproofing. Test
methods assigned or referenced include ASTM D 70: Standard Test Methodfor
Density of Semi -Solid Bituminous Materials (PycnometerMethod); ASTM D 146:
Standard Test Methods for Sampling and Testing Bitumen -Saturated Felts and
Woven Fabrics for Roofing and Waterproofing; and ASTM D 6136: Standard
Test Method for -Kerosine Numberof Unsaturated (Dry) Felt by Vacuum Method.
Sampling: Product samples were provided by Woodland Industries from Griffin, GA.
The test results, opinions, or interpretations are based on the mate dal supplied by the client. This report is for the exclusive use of stated
client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced except in
full without the written approval of this laboratory. PRI Construction Matedals Technologies LLC assumes no responsibility nor makes
performance or warranty statement for this material or products and processes containing this material in connection with this report.
PRICcnshclion Materials Techw1xlles LLC 640813a]ger0rive Tupa,FL33610 Tel:813.621-5777 Fax:e13-621-5840 amail:materlals[esfng@pricmtmm WetSfte:hftpJA~prkmtmm
Woodland Industries
ASTM D 226 for
No. 30
Page 2 of 3
Results: ASTM D 226
Requirement
Property Test Method Result
Type[.-
P.hyslcal Requirements
Breaking Strength (Ibf/in-width)
20 specimens; 1" x 6" x thickness;
ASTM D 146
Cond. 2h @ 73.4t3.6°F & 50t5%RH;
Test @ 73.4t3.60F; Rate=2in/min
Longitudinal (with fiber grain)
66
z30
t 40
Transverse (across fiber grain)
29
t 15
t 20
Pliability (Pass/Fail]
10 specimens; 1" x 8" x thickness;
ASTM D 146
'W radius
'/" radius
Cond. 10-15min in water @ 77t1.80F;
Test 900 around''/2" radius in 2s
Longitudinal (with fiber grain)
Pass
No Failures
No Failures
Transverse (across fiber grain)
Pass
No Failures
No Failures
Loss on Heating (weight %)
2 specimens; 12" x 6" x thickness;
ASTM D 146
2
5 4
5 4
Test Cond. 221 t5°F for 5ht3min
Dimensions`and Masses'
Width of Roll (in)
ASTM D 146
35 7/8
36t1/4
36t1/4
Area, min (ft2)
ASTM D 146
218
432
216
Moisture at Point of Manufacture (%)
ASTM D 146
NT
5 4.3
54.1
As Received'
3.2
5 4.3
5 4'A
Net Mass of Saturated Felt (lb/100ft2)
ASTM D 146
26
t 11.5
z,26
Mass of Saturant (lb/100ft2)
ASTM D 146
17.5
t 6.2
>_ 15.0
Mass Ratio of Saturant to Desaturated Felt
ASTM D 226
1.5
t 1.2
t 1.5
Saturation Efficiency (%)
ASTM D 226
NA
t 70
Mass of Desaturated Felt (lb/100ft2)
ASTM D 146
11.4
t 5.2
t 10.0
Ash (%)
ASTM D 146
5.0
5 1.0.0
5 10.0
Continued on Following Page
The test results, opinions, or interpretations are based on the material supplied by the client. This report Is for the exclusive use of statea
client. No reproduction or facsimile In anyforo can be made without the clients permission. This report shall not be reproduced except in
full without the written approval of this laboratory. PRI Construction Matedals Technologies LLC assumes no responsibility nor makes a
performance orwarranty statement for this material or products and processes containing this material in connection with this report.
PW Constmclion Maledals Technologles LLC 6408 Badger bme Tampa, FL33610 Tel:813-621-5777 Fax: 813-621-584D email: matenalstesting@pdcmtwm WebBite: htV./Maw.pricmtwm
Woodland Industries
ASTM D 226 for
No. 30
Page 3 of 3
NT- Not Tested;
NA- Not Applicable
Statement of Compliance:
The product was tested has demonstrated compliance with the physical requirements of Type II prescribed in
ASTM D 226-09: Standard Specification for Asphalt -Saturated Organic Felt Used in Roofing and
Waterproofing. '
Signed:
-M
bate:
Report Issue History:
Issue # Date Pages I Revision Description (if applicable)
Original 09/18/2017 3 NA
END OF REPORT
client. No reproduction or facsimile in anyfonn can be made without the client's permission. This report shall not be reproduced except in
full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility nor makes a
performance or warranty statement for this material or products and processes containing this material in connection with this report.
PPJConsau&bnMatedals Technologies LLC 64088adger Drive Twpa,FL33810 Tel:813621-5777 Fax:813-621-5840 e-maihmatedaktesgng@pfi mtwm WebSite:httpJAm ,pricmt.mm