HomeMy WebLinkAboutELEVATION REPORT- - --LS�T.
RECEIVED - - -- NEMO ( etc.
Cerz&ote oJAvthorirarion ✓<32455
JAN 1 5 2019 353 Christian Street, Unit #13
Permitting Oxford, CT 06478
de County, (203) 262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
EVALUATION REPORT
Polyglass USA, Inc. 411
Evaluation Report P12060.02.09-R24
1111 West Newport Center Drive tSt ey �® FI-5259-1128
Deerfield suance; 02/24/2009
(954) 2h, FL 33442 UCfQ C+O(jn� • sn Date Revio24; OS/24/201
33-123p8 .
SCOPE:
This Evaluation Report is issued under Rule 61G20.3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen, P.E.
for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products
described herein have been evaluated for compliance with the 61h Edition (2017) Florida Building Code sections noted
herein.
DESCRIPTION: Polyglass Roof Underlayments
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMOIetc. requires a complete.review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMOjetc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its
distributors and shall be available for Inspection at the jobsite at the request of the Building Official.
This Evaluation Report consists of pages 1 through 14
Prepared by;
Robertl.M. Nieminen, P.E.
Florida Registration No. 59166, Florida D6A ANE29B3
The facsimile seat appearing was authorised by Robert Meminen,
RE. on OS/24/2015. This does not serve as an etectronicai!y
signed document.
CERTIFICATION OF INDEPENDENCE:
1. NEMOIetc. does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing productsitevaluates.
2. NEMOI etc. is not owned, operated or controlled. by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial Interestiin any company manufacturing or distributing products for
which the evaluation reports are being issued.
4, Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEMOI etc. nor Robert Nieminen,. P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report. or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
R4EW I etc.
S.5 Allowable Roof Covers:
5't'
ROOfiCOVE+ R OFTIONS'
.YTAB66rhi
Underlayment
ASphalt5hingles
Nail -On Tile
Foam-OnTile
Metal
Wood Shakes
State
.TR Shingles
Elastobase
Yes
Yes
I Yes
Yes
Yes
Yes
(Base SFset le 2P,1Y aYst.')
I Ieue Sheet m 2-ply SYsxrt.:
i Elastobase P
Yes
Yes
Yes
Yes
Yes
_ ves
i
ieasesheet lot -ply systoml
(Save S"et in bp'y sysam;
Polyglass 62 Rase
No
Yes
Yes
No
No
No
(ease Sbeui in x-p7Ye'rnem)
(aasa SheCinl-Ply synemi
l"'"—
Polyglass APP ease
.No
Yes
-Yes
No
NO
No
(Been Sheet in 2.piy system)
lean Sheet to 2.Fly swum)
Polystick MTS or MTS PLUS
Yes
Yes
No
Yes
Yes
Yes
Polystick IR-Xe
i Yes
No
No
No
Yes
Yes
PolyStick TUP
No
Yes
Yes (See 5.5.1)
No
No
N0
POlystiCkTU Plus
Yes
Yes
Yes (See 5.5.1)
Yes
Yes
Yes
Poly tkk Tt-- UMax _-
No
Yes
Yes (See 5.5.1)
Yes
No
No
' Polystick DUai P.'a
Yes
No
No
Yes
Yes
Yes
' Polystick Tile Pro
Polystick
Yes
Yes
Yes (See 5.5.11
Yes
Yes
Yes
r MU-X
Yes
No
No
Yes
Yes
Yes
Elasroflex:56G
Yes
Yes
Yes (see 5.5.1)
No
Yes
Yes
Elostoftene S6 G FR
Yes
Yes
No
No
Yes
Yes 1
' Etastoflax G TU
Yes
Yes 1
Yes (see 5.5.1)
No
Yes
Yes
POlyflexG
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
I Polyflex G in {
Yes
Yes
No
No
Yes
Yes
POIyRex SAP OrSAP FR
yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Mui&Hide SA-APPtap Sheet
Yes
Yes
Yes (See 5.5.1)
Na
Yes
Yes
. ar SAAPP Cap sheet (FR)
5.5.1 "Foam -On Tile" is limited to use of the following Approved the adhesives,/ underlayment combinations.
'" r �TAe[E�.A'ALIDWAeLETILE'AoHFStvEt/,UNOERiAYMENT
COMBiNATiQNSi� 'r YC �
Adhesive
Florida Product
Uhderlayments
Approval
DAP Foam Touch'n Seal StormSond Roof
Tile Adhesive
FL14506
Polystick TU.Plus, Polystick TU Max
Dow TIIeRond"
FL22525
Polystick TU P, Polystick TU Plus, Pofyflex.SAP or Tile Pro
Polystick TU P, Polystick TU Plus, Pa)ystick TU Max, Polystick Tile Pro.
ICP Adhesives Polyset" AH-160
FL6332
Elastoflex G 7U, Elastoflex S6 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR,
Mule -Hide SA-APP Cap Sheet or Mule -Hide SA-APP Cap Sheet (FR)
Polystick TU P, Polystick TU Plus, Polystick TU Max, Polystick Tile Pro,
ICP Adhesives Polyset° RTA-1
FL6276
Elastoflex G TU, Elastoiex S6 G, Polyflex.G, Polyflex SAP, PolyBex SA Cap FR,
Mule -Hide SA-APP Cap Sheet or Mule -Hide SA-APP Cap Sheet (FR) i
' Refer to Tile Manufacturer's of Adhesive Manufacturers Florida Product Approval for Overturning Moment Resistance Performance.
NEMO ETC, LLC. Evaluation Report 912060.02.09-R2A
Ce"*We OJAutholUoNon 032455 6'"EDITION (2012): FeC NON-HVH2 EVALUATION FLS2S9-R2R
Polyglass Roof Undenayments; 19S4)233.1230 Revision 24:01/24/2018
Page S of 14
_*NEM0 I etc.
5.6 Allowable Substrates:
5.6.1 Direct -Bond to Deck:
Polystick (all variations), Dual Pro, Tile Pro, Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet
(FR) self -adhered to:
> New untreated plywood; ASTM 041 primed new untreated plywood; Existing plywood; ASTM D41 primed existing
plywood; New or existing, unprimed OSB; ASTM D41 primed OSB; Southern Yellow Pine; ASTM D41 primed
Southern Yellow Pine; ASTM D41 primedstructural concrete; Huber Engineered Woods "ZIP System" Panels
(designed and installed to meet wind loads for project).
Note: Polyglass does not require priming of new or existing plywood or OSB sheathing. New or existing plywood ar
OSB sheathing should be cleaned of all dirt and debris prior to application of Polystick membranes.
Elastoflex G TU, Elastoflex S6 G or Elastoflex 56 G FR in hot asphalt to:
ASTM D41 primed structural concrete.
Polyflex G.or Polyflex G FR torch -applied to:
> ASTM D41 primed structural concrete.
5.6.2 Bond -to -Insulation:
Polystick (all variations), Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) self -adhered
to:
> ASTM C1289, Type 11, Class 1 polyisocyanurate or.Type V polyisofyanurate-composite insulation; Dens Deck
DuraGuard; Dens Deck Prime; or SECUAOCK Gypsum -Fiber Roof Board.
Elastoflex G TU, Elastoflex 56 G or Elastoflex S6 G FR in hot asphalt to:
> Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
Poiyffex G or Polyflex G FR torch -applied to:
> ASTM D41 primed structural.. concrete; Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per minimum
requirementsofthe prepared roof covering manufacturer's Product Approval. For Installations under foam -on tile
systems, insulation attachment shall be designed by a qualified design professional and installed based on testing of
the insulation/underiayment system in accordance with FBC Section 1504.3.1.
5.6.3 Bond to Mechanically Attached Base laver:
Polystick (all variations), Polyflex SAP.or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) Dual Pro or
Tile Pro self -adhered to:
ASTM D226, Type 1 or 11 felt; Elastobase; Elastobase P or Mule -Hide Nail Base.
Elastoflex.G TU, Elastoflex S6 G or Elastoflex S6 G FR in hot asphalt to:
> ASTM 0226, Type I or If felt; Elastobase; Elastobase P, Mule -Hide Nail Base or Polyglass G2 Base.
Polyflex Gor Polyflex G FR torch -applied to:
> Elastobase; Elastobase P, Mule -Hide Nail Base, Polyglass G2 Base or Polyglass APP Base.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per minimum
codified requirements. For installations under foam -on tile systems, base. layer shall be attached per minimum
requirements of FRSA/TRI April 2012 (04-12), Appendix A, Table 1, or as listed In Section 5.6.4 herein,. or as tested in
accordance with FBC Section. 1504.3.1.
NEMO ETC, LLCC Evaluation Report P12060.02.09 R24
Certrfimre ofAu:hanmNan 232455 eEDITION 1261-1) F8C NON-HVHZ EVALUATION FLSM.RM
Polyglass Roof Underlayments; (954).233.1730 Revision 24:01/24/2018
Page 6 of 14
-NNEMO-1 etc.
5.6.4 Wind Resistance for Underlayment Systems in Foam -On Tile Applications: FRSA/TRI April 2012 (D4-12) does not
address wind uplift resistance of all underlayment systems beneath foam -on the systems, where the underlayment
forms part of the load -path. The following wind uplift limitations apply to underlayment systems that are not
addressed in FRSA/TRI April 2012 (04.12) and are used in foam -on tile applications. Maximum Design Pressure is the
result of testing. for wind load resistance based on allowable wind loads, and reflects the ultimate passing pressure
divided by 2'(the 2 to 1 margin of safety per FBC 1504.9 has already been applied). Refer to FRSA/TRl April 2012 (04-
12), Appendix A, Table 1A or FSC 1609:for determination of design wind loads.
#1 Maximum Design Pressure =-90 psf:
Deck; Min. 15/32-inch plywood to meetproject requirements to satisfaction of Authority Having Jurisdiction.
Primer: None
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS,self-adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
Mule -Hide SA-APP Cap Sheet (FR), self -adhered.
#Z Maximum Design. Pressure:=-97.5 psf.
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
Mule -Hide SA-APP.Cap Sheet (FR), self -adhered and back -nailed within the selvedge -edge side laps using 12 ga. x
1%" ring shank nails through 32 ga., 1-5/8" diameter tin caps spaced 12-inch o.c.
#3 Maximum Design Pressure =-105 psf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: WB-3000
Base Ply; (Optional) Polystick MTS or Polystick. MTS PLUS; self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Pclystick'TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
Mule -Hide 5A-APP Cap Sheet (FR), self -adhered and back -nailed within theselvedge-edge side laps using 12 ga. x
IW ring shank nails through 32 ga., 1.518" diameter tin caps spaced 12-inch o.c.
#4 Maximum Design Pressure = -135 psf:
Deck.: Min. 1S/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: (Optional) PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Joints: Min. 4-inch wide strips of Elastoflex SA-V over all plywood joints;
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
Mule -Hide SA-APP Cap: Sheet (FR), self -adhered.
#5 Maximum DesignPressure=.-315 psf:
Deck: Structural concrete to meet projectrequirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment Polystick TU P, Polystick TU Plus, Polystick TU Max, Tile Pro, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap
Sheet and Mule -Hide SA•APP Cap Sheet (FR), self -adhered.
#6 Maximum Design Pressure =-622.5.psf
:
Deck: Structural concrete to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Underlayment: Elastoflex G TU or Elastoflex 56 G, appliedin full mopping of hot asphalt or Polyflex G, torch -applied.
#7 Maximum Design .Pressure =-30.0psf*i
Deck: Min. 15/32-Inch OSS to meet projectrequirements to satisfaction of Authority Having jurisdiction,
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surf ace)
Fasteners: 11ga. x 1.25-inch long x 1-inch head diameter round metal cap nails
Spacing: 6-inch: o.c. at the 3-Inch wideside laps and 6-inch o.c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
Mule -Hide SA-APP Cap Sheet (FR), self -adhered.
NEMO ETC, I.I.C. Evaluation Report P32060.02.09-R24
Crrtiprate of Autharvown.432455 6T" E13ITION(2027) FBC NON.HVHZ€VALUATION FL5259-R28
Po lyglass Roof Undedayments; (954)233-1230 Rev;Sion 24: 01/24/2018
Page 7 of 14
MEMO l e
#23 Maximum Design Pressure = -90 osf
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Polyglass G2 Base or Polyglass APP Base (requires use of torch -applied undedoyment)
Fasteners: Dekfast 914 with Dekfast Hex plates, OMG #14 HD with OMG 3" Galvalume Steel Plates, OMG Roofgrip #14 with
OMG Flat Bottom Plates (AccuTrac), Trufast HD with Trufast 3-Inch Insulation Plates or Simplex MAXX Cap
Fastenens
Spacing: 9-Inch o.c. at the 4-inch wide side laps. and 9-Inch o.c- at four (4) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot asphalt or torch -applied or Polyflex G, torch -
applied.
924 Maximum Design Pressure=-97.5 psf:-
Deck: Min. 19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25-inch x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 4-inch o.c. at the 4-inch wide side laps and 4-inch o.c. at four (4) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Muie-Hide SA-APP Cap Sheet and
Mule -Hide SA-APP Cap Sheet (FR), self -adhered.
U25 Maximum Design Pressure = -1U5 osf
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: Elastobase-(sanded top surface for hot -asphalt or torch-applledcap or poly -film surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-inch o.c. at the 2-Inch-wide side laps and 6-Inch: o.c, at three (3) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S66, appiled9n full mopping of hot asphalt or Polyflex G, torch -applied.
#26 Maximum Design Pressure =-112 5osf>
Deck: Min. 19/32-Inch plywood to meet projectrequirements to satisfaction of Authority Having.lurisdiction,
Base Sheet: Elastobase or Mule -Hide Nail Base (pofyfiim top surface)
Fasteners: 11 ga. x 1.25-inch x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 6-inch o.c- at the 4-inch wideside laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Primer: PG100 or ASTM D41 primer at all tin -caps
Base Ply; Polystick MTS or Polystick.MTS PLUS, self -adhered
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA-APP Cap Sheet and
.Mule -Hide SA-APP Cap Sheet (FR), self -adhered.
#27 Maximum Design Pressure =-120 psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgrfp or OMG #14 Heavy. Duty with OMG 3" Round Metal Plates or OMG Flat. Bottom Metal
Plates
Spacing: 6-inch o.c. at the 4-mch wide side laps and 6-inch o.c. at five (5) equally spaced staggered center rows.
Underlayment: ElastoflexG TU or Elastoflex56 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#28 Maximum Design Pressure =-120 psfi
Deck: Min, 15/32-ihch plywood to meet project requirements to satisfaction of AuthorityHaving Jurisdiction.
Base Sheet: Elastobase (sanded top surface)
Fasteners: Trufast#12 OP or Trufast#14 HD. with Trufast 3" Metal Insulation Plates
Spacing: 6-inch o.c. at the 4-inch wide side laps and 6-inch o.c. at five (5)equally spaced staggered center rows.
Underlayment; Elastoflex G TU or Elastoflex 56'G, applied In fullmopping of hot asphalt.
5.6.4.1 All other direct -deck, adhered Polyglass underlayment systems beneath foam -on tile systems carry a Maximum
Design Pressure of-45 psf.
NEMO ETC, U.C. Evaluation Report P12060.02.09-R24
Grt�fimreoj4uthen:ounn P31455 e" EDITION (20171 FBC. NON-HvHZ EVALUATION fLs259_R28
Polyglass Roof Underlayments; (954) 233-1230 ReNsion 24: 01/24/2018
Page 10 of 14
5.6.4.2 For mechanically attached Base Sheet, the maximum design pressure for the selected assembly shall meet or exceed
that requiredunder FRSAJTRI April 2012 (04-12), Appendix A. Table 1A.
Alternatively, the maximum design pressure for.the selected assembly shall meet or exceed the Zone 1 design
pressure determined in accordance with FBC 1609. In this case, Zones 2 and 3 shall employ an attachment density
designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods arc
ANSIJSPRILVD1, FM Loss Prevention Data Sheet 1-29 and Roofing Application Standard RAS 117, Assemblies marked
with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss. Prevention Data Sheet.1-29 (January
2016)for Zone 213 enhancements.
5.7 Exposure Limitations:
E.astobase, Elastobase P, Polyglass G2 Base or Polyglass APP Base shall not be left exposed for longer than 30-days
after installation,
Polystick (R-Xe or Polystick MU-X shall not be left exposed for longer than 90-days after installation,
Polystick MTS, MTS PLUS, TU P, TU Plus, TU Max, Dual Pro; Tile Pro or Elastoflex G TU :shall not be left exposed for
longer than 180-days after installation.
Polyflex. SAP or SAP FR, or Mule -Hide SA-APP Cap Sheet or SA•APP Gap Sheet (FR) does not have an exposure
limitation, unless the preparedroof covering is to. be adhesive -set tile, in which rase the maximum exposure is 30
days.
ilastofiex S6 G or Elastoflex 56 G FR or Polyflex G or Polyflex.G FR does not have an exposure !imitation, unless the
prepared roof covering is to be adhesive -set the (Elastoflex 56 G or Polyflex G only); in which case the maximum
exposure is 180 days.
5.8 Polystick MU-X has been found through comparative testing to havea lesser coefficient of friction than ASTM D226
roofing feltin a dry condition, tested :atstandard -laboratory conditions. . Agreement between purchaser and seller, as
set forth in Section 4.3, Note of ASTM-D1970-15; should be established as to slip resistance.
-5.9 Tile Slippage Limitations (FRSAiTRI April 2012 (0,} J12-
When loading roof tiles on the underiayment in direct -deck tile assemblies, the maximum roof slope :shall be as
follows. These slope limitations can onlyfbe exceeded by using battens duringiload ng of the roof tiles.
_ . ,.�„3'aai.e2'TitE;SGePAGE#:ttairtito�r5.�ment[Ec_r
EYea�'FateTt`vs;Ati+tilOxS
Underlayment f Tile Prafite -
( Staging Mothod
Maxrmssm Slope
f Elastoflex ISTU Flat
i Lugged
-- 10-tile stack
7fi<2 j
_-
$-tile stack{6 over 2)
6;12
j .Elastoflex 566 or 56 G FR i Flatot Lugged
;&tilestack (4"over 2)
4:12
( Polystick MTS or MTS PLUS Flat
i _ Lugged �
Polyp- slick T1.e. Pro Flat or Lugged
6-Tile stack (4 overt} -
_
5;12
&-tile Slack {44vef 2)
6-tile stack (4 over 2)
4;i2
7:12
�( Nat
( Polystick TU Max Lugged-
Lugged
6-tile stack (4 over 2) or to -tile stack
7:12
6-.tile slack (4over2}
{ 7:12 -
10-tilestack
6:12
{ Flat
i Polystick TU P ; Logged
—�
6-tile stack (4 over 2)
6:12
&tile stack (4. over 2) l
4:12
Fiato7 Lugged
Polystick TU Plus -
--Fiator Lugged
&-cite stack (4 over 3}
722:..
10-tile5tack
6:12
PolyflexG or G FR Flat: or Lugged
6-tile stack (4 over 2)
-4:12
Polyflex SA P or SA P FR Flat or Lugged
&tile stack (4 over 21
- 4:12
NEIAO ETC, LLC, Evaluation Report P12060.02.09-R24
Ctlticote o,AWhod,.00n 03455 6!�EDITION (2017; FFIC NON-HVH2:EVALUATION rL5254.R2a
Poyglass Roof Underlayments; (954) 233.1230 Revision24: 01124/2029
Page IIof14
6. INSTALLATION:
6.1 Poiyglass Roof Underlayments shall be installed in accordance with Polyglass published installation requirements
subject to the Limitations set forth in Section 5 herein and the specifics noted below.
G.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to remove
.any dust -and -debris prior toapplication, and ..prime .the substrate (if applicable)..
6.8.1 Non -Tile Applications:
Shall be Installed in compliance with the codified requirements for.ASTM 0226. Type II underlayment in FBC Table
1507.1.1 for the type of prepared roof covering to be installed.
Elastobase, Elastobase P or Mule -Hide Nail Base may be covered with a layer of Polystick, Polyflex SAP, Polyflex SA
P FR, Mule -Hide. SA-APP Cap Sheet or SA-APP Cap Sheet (FRI, self -adhered, Elastoflex G TU, ElaStoflex. 56 6 or
Elastofiex S6 G FR in hot asphalt or Polyflex G or Polyflex G FR, torch applied. Roof cover limitations are those are
those associated with the top layer underlayment,as set forth in Table 1.
6.3.2 Tile Applications:
Elastobase, Elastobase P or Mule -Hide Nail Base are limitedto use as a mechanically attached base. sheet in the "Two
Ply System' from FRSA/TRI April 2012 (04-12). Reference Is made to Table 1 and Section 5.6.4 herein,, coupled with
FRSA/TRI April2012 (04-12) Installation: Manual.
6.4.2
in FBC Table-1SO7.1.1 for the type: of prepared roof covering to be installed,
Direct -to -Peck with Mechanically Fastened -Roof Covers:
All self -adhering materials, with the exception of Polystick TU Plus, Polyflex SAP or SAP FR and Mule -fide SA-APP
Cap Sheet or SA-APP Cap Sheet (FR) should. be back -nailed in selvage edge seam in accordance with Polygiass / Mule -
Hide back nailing guidelines. Nails shall be corrosion resistant 11 gauge ring -shank type with a minimum 1-inch
diameter metal disk or Simplex -type metal cap nail, at a minimum rate of 12" o.c. Polystick TU Plus should be back -
nailed using the above noted fasteners and spacing, in area marked "nail area, area pare eleven' on the f ace of
membrane.. The head lap membrane is to cover the area being back -Walled.
All seal -lap seams (selvage laps) must 6e - " „k,;µ.;
firmly rolled with a minimum 28 lb. hand ' P
roller to ensure full contact and adhesion. u :
For Dual Pro and Tile Pro; align the edge
thetop sheet to theend of the glue patt
(the sheetwiilloverlap the fabric).
All over -fabric and over -granule end -laps shall have a b-inch, wide,uniform layer of Polyplus 50 Premium. Modified
Wet/Dry Cement orPolyglass.PGS00Modified Cement applied.in'between the application of the lap,
Polystick TU Plus, Dual Pro and Tile Pro may not beused in any exposed application such as crickets, exposed valleys,
or exposed roof to wall details
-NEMO ETC, LLG Evaluation Report P12060-02.09-R24
rerfiflmre ofA.M mrorro4 a3I455. 4" EDITION :(2017)Pat NON-HVHZ.EVA'WATiON €LS299-R2R
Polygla" Roof Underlayments11454) Z331230 Revision 24: 01/24/201a
Page 12of 14
-- -- - - - - -- - - - T NEMO eiC.
Repair of Polystick membranes is to be accomplished by applying Polyplus 50 Premium Modified Wet/Dry Cement or
Polyglass PG500 Modified Cement to the area in need of repair, followed by a minimum 6 x 6 inch patch of the
Polystick material of like kind, set and hand rolled in place over the repair area. Patch laps, If needed, shall be
installed in a water shedding manner.
All Polystick membranes shall be installed to ensure full contact with approved substrates. Polyglass requires a
minimum of 40-lb weighted -roller or, on steep slopes, use of a stiff broom with approximately 40-lbs of load applied
for the field membrane. Hand rollers are acceptable for rolling of patches, laps (min. 28 lb roller) or small areas of the
roof that are not accessible to a large roller or broom.
6.4.3 Tile Applications lnot allowed for Polystick Duai:Pro, lR-Xe or. Polystick MU-Xl:
Reference is made to FRSA/TRI April 2012 (04-12) Installation Manual and Table 1 herein, using the instructions
noted above as aguideline.
For mechanically fastened tile roofing over 2-ply system, consisting of Base Sheet and self -adhering top sheet(s), Base
Sheet fastening shall be not less than FRSA/TRI April 2012 (04-12), Table 1.
For adhesive -set tile applications, refer to Section 5.6.4 herein.
6.4.4 Two (2) Ply Underlayment Svstems:
Polystick MTS. or MTS PLUS followed by Polystick MTS; MTS PLUS, TU P, TU Plus, TU Max, Tile Pro, MU-X or Polyflex
SAP is allowable for use under mechanically attached prepared roof systems. Limits of use are thoseassociated with
the top -layer material. This is not.a requirement, but is allowable If a 2-ply underlayment system Is desired.
Polystick MTSorMTS PLUS followed by Polystick TU P, TU Pius, TU Max, Tile Pro or Polyflex SAP is allowable for use
under foam -on tile systems. Limits of useare those associated with the top -layer material. This is not a requirement,
but is allowable if a 2-ply underlayment system. is desired.
6.5.1 Elastoflex G TU,;,Elastoflex:S6 G or Elastoflex BIG G$ FR shall be installed In compliance with current Polyglass published
installation requirements. For use In tile applications:
✓ Elastoflex G TU is for use as an alternate to "Mineral Surface Rail Roofing" (ASTM D6380. Class M) in the "Single
Ply System" from FRSA/TRI April 2012 (04-12)'beneath mechanically fastened tile roof systems or the Hot Asphalt
applied "Cap Sheet' in. the `Two Ply System" from FR5A/TRI April 2012 (04-12) beneath mechanically fastened or
adhered tile roof systems.
✓ Elastoflex S66 is for use as an alternate to "Mineral Surface Roll Roofing" (ASTM D6380, Gass M) in the "Single Ply
System" from FRSA/TRl April 2012,(04-12) beneath mechanically fastened the roof systems or the Hot Asphalt
applied 'Cap Sheet" In the "Two. Ply. System" from FRSA/TRI April 2012 (0442) beneath mechanically fastened or
adhered tile roof systems.
✓ Elastoflex S6 G FR is for use as an alternate to "Mineral Surface Roll Roofing".(ASTM D6380, Class M) in the "Single
Ply System" from FRSA/TRI April 2012.(04-12) beneath mechanically fastened the roof systems or the Hot Asphalt
applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened the
roof systems.
6.5.2 For hot -asphalt -applications, Elastoflex IS TU, Elastoflex s6 G.or Elastoflex S6 G FR shall be fully asphalt -applied to the
substrates noted in Section 5.6. Side laps shall be minimum 3-inch and end -laps minimum 6-inch wide, offset
minimum 3 feet from course to course. Side and end laps shall be fully adhered a.complete moppingof hot asphalt
with asphalt extending approximately 3/8-inch beyond the lap. edge.
6.6J Polyflex G or Polyflex G FR shall be installed in compliance withcurrent
For use in tile applications:
✓ Polyflex G is for use as an alternate to the Heat Applied "Cap Sheet' in the "Two Ply System" from FRSA/TRI April
2012 (04-12) beneath mechanically fastened or adhered file roof systems (Base Sheet Limited per 5.6.3).
✓ Polyflex G FR is for use as an alternate to the Heat Applied "Cap Sheet' in the 'Two Ply System" from FRSA]TRI
April 2012 (04-12) beneath mechanically fastened tile roof systems (Base Sheet Limited per 5.6.3).
MEMO ETC, LLC. Evaluation Report P12060.02:05-R24
4rtf<ara afavthcru"tion 432455 6' EDITION (2017) FBC NON-MIZ EVALUATION FL5259R2a
Polyglass Roof Undedayments:.19541233-1230 Revision 24:01/24/2018
Page 13 of 14
NEKW6
6.6.2 Polyflex G or Polyflex G FR shall be fully torch -applied to the substrates noted in Section 5.6. Side laps shall be
minimum 3-inch and end -laps minimum 6-inch wide, off -set minimum 3 feet from course to course. Side and end
laps shall be fully heat -welded and inspected to ensure minimum 3/8-inch flow of modified compound beyond the lap
edge.
6.7 Tile Staging:
6.7.1 Tile shall be loaded and staged in a manner that prevents tile slippage and/or damage to the underlayment. Refer to
Table 2 herein,, and Polyglass published requirements for tile staging.
6.7.2 Battens and/or Counter -battens, as required by the tile manufacturer and FRSA/TRI April 2012 (04-12) must be used
on all roof slopes greater than 7:12. Precautions should be taken as needed, such as the use of battens or sail-
boards, to prevent tile sliding and/or damage to the underlayment during the loading process.
6.7.3 Polyglass specifies the minimum cure time after installation of self -adhering membranes and before loading of
roofing tiles is forty-eight (48) hours.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product.
8. MANUFACTURING PLANTS:
Contact the noted CIA agency for information on product locations covered for F.A.C. 61G20-3 QA requirements. The following
plants have qualified products under their respective physical properties specifications.
PM
_
-
Fernley, NV, Hazleton, PA & Winter Haven, FL
ASTM D1970
Polystick MU-X
Hazleton, PA
M-D 13.0004
Elastoflex G TU
Hazleton, PA & Winter Haven, FL
ASTM D1970
Polystick IR-Xe ry
ASTM D1970 & FRSA/TRI April 2012
Polystick TU Plus
ASTM D1970 & FRSA/TRI April 2012
Polystick TU Max u
Tuscaloosa, AL
ASTM D4601, Type it
Polyglass G2. Base
Winter Haven, FL
ASTM D226.(physit;als)
Elastobase, Elastobase:P
ASTM D6569 -
Polyglass APP Base
FRSA/TRI April 2012
Polystick MTS, Polystick MTS PLUS
FRSA/TRI April 2012
Polystick TU P
FRSA/TRI April 2012
Polyflex SAP, Polyflex SA P FR
ASTM D1970
Polystick Dua4Pro
ASTM D1970 & FRSA;?RI April 2012
Polystick Tile Pro
ASTM 06164
Elastoflex 56, Elastoflex 56 G FR i
ASTM D6222
Polyflex G Pai Iex G FR
QUALITY ASSURANCE ENTITY:
UL, LLC— QUA9625; (314) 578-3406; k.chancellor@us.ul.com
MEMO ETC, LLC.
Ce,tifcofe NAuNar;mtion?3245S
END OF EVALUATION REPORT -
67"£DMON (2017)FBC NON-HVHZ EVALUATIOI
Polyglass Roof Underlayments; (954) 293-1230
Evaluation Report P12060.02.09-R24
R.52S9 R2R
Revision 24:01124/2018
Page 14 of 14