HomeMy WebLinkAboutEVALUATION REPORTR R
CODE COMPLIANCE NEMO I etc.
ST. LUCIE COLITY Certificate of Authorization#32455
®eiC 353 Christian Street, Unit#13
Oxford, CT 06478
(203)262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
REPORTEVALUATION
Polyglass USA, Inc. Evaluation Report P9290.02.08-R21
150 Lyon Drive SGANNED FLi654-T2
Fernley, NV 89408 BY Date of Issuanck02/1vio08
(954) 233-1330 St. Lucie GUUnt f Revision 21:10/08/2018
SCOPE: Y
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herein has been evaluated for
compliance with the 61h Edition (2017) Florida Building Code sections noted herein.
DESCRIPTION: Polyglass SBS and APP Modified Bitumen Roof Systems
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
CDBMNMD_COMPnnNCE: Thlc-Fvahiation$eno is valid until-cttrhtimPacthP-nanlpd nr_T n_dttrt(5).ChangeS,lhP-referenrPri
Quality Assurance documentation changes, o_rprovisions of the Code that relate to the MM product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMO I etc. requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMOIetc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 4, plus a 65-page Appendix.
Prepared by:
:F E
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
CERTIFICATION OF INDEPENDENCE:
The facsimile seal appearing was authorized by Robert
Nieminen, P.E. on 10/08/2018. This does not serve as an
electronically signed document
1. NEMO ETC, LLC does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO ETC, LLC is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nleminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
S. This is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
y .h4:: S✓
ROOFING SYSTEMS EVALUATION:
ONEMIGIletc.
Product Category: Roofing
Sub -Category: Modified Bitumen Roof Systems
Compliance Statement: Polyglass3BS and APP Modified Bitumen Roof Systems, as produced by Polyglass USA,
Inc., have demonstrated compliance with the following sections of the 6th Edition (2017) Florida Building Code
through testing in accordance with the following Standards. Compliance is subject to the Installation Requirements
and Limitations / Conditions of Use set forth herein.
1504.3.1
Wind
FM 4474
2011
1504.3.1
Wind
UL1897
2012
1504.7
Impact
FM 4470
2012
1507.11.2
Physicals
ASTM D6162
2008
1507.11.2
Physicals.
ASTM D6163
2008
1507.11.2
Physicals
ASTM D6164
2011
1507.11.2
Physicals
ASTM D6222
2011
1507.11.2
Physicals
ASTM D6509
2009
crtv Vmown
END (TST6049;
nviFM rv,v/'.'r.v
4470/4474
P13770.09.09
w, w,cvuo
09/10/2009
na.uovq
FM (TST1867)
FM 4470
3006646
01/04/2000
ERD (TST6049)
FM 4476/4474
P30540.11.09-R1
11/30/200
FM (TST1867)
FM 4470
3001334
01/25/2000
ERD (TST6049)
FM 4470/4474
P30550.12.09
12/02/2009
FM M19671
FM 4470
3001334
02/15/2000
ERD(TST6049)
Physicals
_ P33960.12.10
12/30/2010
FM (TST1867)
FM 4470
3000857
01/12/2000
ERD (TST6049)
FM 4470/4474
P33970.03.11
03/15/2011
FM (TST1867)
FM 4470
3004091
01/12/2000
ERD (TS76049)
Physicals
P37590.03.13-3A
03/06/2013
FM (T5T1867)
FM 4470
300611S
05/02/2001
ERD (TST6049)
FM 4470/4474
P39680.03.13
03/04/2013
FM (TST1867)
FM 4470
3022321
07/29/2002
ERD (TST6049)
Physicals
P37590.03.13-1-RI
06/26/2013
FM CM718671
FM 4470
3014692
08/05/2003
ERD'(TST6049)
Physicals
P37590.03.13-2-111
07/01/2013
FM CM18671
FM 4470
3014751
DB/27/2003
ERD W6049)
Physicals
P37590.07.13-2
07/01/2013
FM (TST1867)
FM 4470
3007170
01/13/2004
ERD (TST6049)
Physicals
P37590.03.13-5-RI
07/01/2013
FM (TST1867)
FM 4470
3019317
06/30/2004
ERD (TST6D49)
Physicals
P37590.07.13-1
07/02/2013
FM (TST1867)
FM 4470
3020703 _
07/30/2004'
ERD (TST6049)
FM 4470/4474
P41630.08.13
08/06/2013
FM M71867)
FM 4470/4474
3019332
01/31/2006
ERD (TST6049)
Physicals
P45940.D9.13
09/04/2013
FM (TST1867)
FM 4470/4474
3023368
03/20/2006
ERD (TST6049)
Physicals
P44370.10.13
10/D4/2013
FM (TST1867)
FM 4470/4474
3024594
05/23/2006
ERD (TST6D49)
Physicals
P39520.09.14-2
09/11/2014
FM (TST1867)
FM 4470/4474
3023458
07/18/2006
ERIC (TST6049)
FM 4470/4474
SC6160.11.14
11/10/2014
FM (TST1867)
FM 4470/4474
3030668
09/12/2007
ERD (TST6D49)
Physicals
P45440SC.03.15-1
03/31/2015
FM (TST1867)
FM 4470/4474
3032172
06/12/2009
ERD US76D49)
Physicals
SC5170.05.35
05/D8/2015
FM (TST1867)
FM 4470/4474
3049631
04/21/2014
ERD (TST6049)
FM 4474
SC8085.05.15
05/19/2015
FM (TST1867)
FM 4470/4474
3057029
02/02/2017
ERD (TST6049)
Physicals
SC5170.12.15
12/29/2015
NEMO(TST6049)
Criticality
4 PLYG-I8-00La6.18
06/23/2018
ERD(TSrGD49)
FM 4470/4474
SC9455.15
04/01/2016
NEMO(TST6049)
FM 4474
41,-PLYG-I8iao3.08.18
08/21/2018
ERD (TST6D49)
FM 4470/4474
PLYG-SC8905.05.16-1
05/17/2016
NEMO(TST6049)
FM 4474
PLY&C, o, C4, 6, CB
09/21/2018
ERD (TST6049)
FM 4470/4474
PLYG.SC8905.05.36-2
05/17/2016
NEMO(TST6049)
Criticality
4SPLYG.18-0O1.I0.18
10/03/2018
ERD M76049)
FM 4470/4474
PLYG-5010815.07.1SRI
09/23/2016
PRI OSTS8781
Physicals
PUSA-062-02-01
12/04/2007
ERD UST6049)
UL1897
PLYG.SC12025.10.16
10/12/2016
Pill MT5878)
Physicals
PUSA-061-02-02
01/28/2OD8
ERD M6049)
FM 4470/4474
PLYG-SC11475.16
11/17/2016
PRI (TST5878)
Physicals
PUSA-064-02-02
02/27/2008
ERD (TST6049)
FM 4470/4474
PLYG-SC13235.01.17
01/17/2017
PRI "115878)
Physicals
PUSA-062-02-02
12/04/20DB
ERD (TST6049)
FM 4470/4474
PLYG.SC33920.05.17
05/30/2017
PRI (TST5878)
TAS 114-
PUSA-188-02-01
02/08/2017
ERD (TS711294)
FM 4470/4474
PLYG-Ci113945.05.17-1
05/30/2017
PRI (TST5878)
TAS 114
PUSA-188.02-02
02/08/2017
ERD (TST11294)
FM 4470/4474
PLYG-Cn13945.05.17-3
05/30/2017
PRI (TST5878)
TAS 114
PUSA-188-02-03
02/08/2017
ERD (TST6049)
FM 4470/4474
PLYG.SC33945.05.17
05/30/2017
PRI I TST5878)
TAS 114
PUSA-202-02-01
05/17/2017
ERD (TST6049)
FM 4470/4474
PLYG-SCIS760.09.17
09/11/2017
PRI (TST5878)
TAS 114
PUSA-202-02-02
05/17/2017
FM(TST18671
FM 4470
2W7A7.AM
08/04/1994
M-D(CER3592)
HVHZ
Various NOAs
Various
FM (fST18671
FM 4470
OD3A3.AM
04/04/1997
M-D(CER1592)
Prop. for Rev.
10-0823
10/12/2010
UL (QUA9625)
QualityControl
Service Confirm
09/13/2018
NEMO ETC, LLC Evaluation Report P9290.02.08-R21
Certificate of Authorization D32455 6TM EDITION (2017) FBC NON-HVHZ EVALUATION FL3654-R23
Polyglass Modified Bitumen Roof Systems: (954) 233-1330 Revision 21: 10/08/2018
Page 2 of 4
V. , ONEMOletc.
This Evaluation Report covers Polyglass Modified Bitumen Roof Systems installed in accordance with Polyglass USA,
Inc. published installation instructions and the Limitations / Conditions of Use herein. The following Polyglass
membranes make up the subject systems.
TABLE
1: ROLL -GOODS FOR POLYGLASS MODIFIED BITUMEN
Product.Reference
ROOF SYSTEMS
Specifion,=:
'> ,
Grade
-Type
Base Sheets
Polyglass G2 Base
ASTM D4601
N/A
II
Polyflex SA Base
ASTM D4601
N/A
II
Polyglass APP Base
ASTM D6509
N/A
N/A
SBS Membranes
Polyglass HT Base 650
ASTM D6162
S
III
Elastobase
ASTM D6163
S
I
_Elastoflex V _. a
ASTM D6163
S
1
' E al stoflex SACV%Base. _-z - - - - -
ASTM D6163, Table 2
S
I
6ait6fI SA V FR Base
ASTM D6163, Table 2
S
I
Elastoflex SA V Plus
ASTM D6163
S
I
Elastoflex SA V Plus FR
ASTM D6163
S
I
Elastobase Poly
ASTM D6164
S
1
Elastoflex S6
ASTM D6164
S
I
Elastoflex S6 Type 11
ASTM D6164
S
II
astofle
-ElastaflexVGFR— --
---- ASTM-D6163--
—
G—
1-
-
stofl—
---
-- --
- - —
'
SBS Membranes
'
Elastoflex S6 G FR
ASTM D6164
G
I
Polyfresko G SES (sand or poly -film back)
ASTM D6164
G
I
Polyfresko G SBS FR (sand or poly -film back)
ASTM D6164
G
I
Elastoshield TS G
ASTM D6164
G
I
Elastoshield TS G FR
ASTM D6164
G
I
Elastoflex SA P
ASTM D6164
G
I
Elastoflex SA P FR
. ASTM. D6164
G
I
Polyreflect ,
ASTM D6164
. ' S
I
'
APP Membranes
.
Pol e-
ASTM D6222
S
I
4P.Op%flpex'G�
ASTM D6222
G
I
PolyflexG FR
ASTM D6222
G
I
Polyfresko G,
ASTM D6222
G
I
Polyfresko G FR
ASTM D6222
G
I
Polybond
ASTM D6222
S
I
Polybond G
ASTM D6222
G
I
Polyflex SA P
ASTM D6222
G
I
Polyflex SA P FR
ASTM D6222
G
I
Polyfresko G SA
ASTM D6222
G
I
Polykool
ASTM D6222
S
I
5.1 This is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of
Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design'guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Refer to a current Approved Roofing Materials Directory for fire ratings of this product.
5.4 For steel deck installations, foam plastic insulation shall be separated from the building interior in accordance with
FBC 2603.4 unless the exceptions stated in FBC 2603.4.1 and 2603.6 apply.
NEMO ETC, LLC Evaluation Report P9290.02.08-R21
Cenificate of Authorization#32455 e EDITION (2017) FBC NON-HVHZ EVALUATION FL1654-R23
Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Revision 21: 10/08/2018
Page 3 of 4
ON&Wletc.
5.5 The roof system evaluation herein pertains to above -deck roof components. Roof decks and structural members shall
be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. Load resistance of
the roof deck shall be documented through proper codified and/or FBC Approval documentation.
5.6 For recover installations, the existing roof shall be examined in accordance with FBC 1511.
5.7 For mechanically attachedinsulation or membrane or strip -bonded insulation; the maximum design pressure for the --
selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with FBC Chapter 16.
Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resist the elevated
pressure criteria. Commonly used methods are ANSI/SPRI WD3, FM Loss Prevention Data Sheet 1-29, Roofing
Application Standard RAS 117 and Roofing Application Standard RAS 137. Assemblies marked with an asterisk`
carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (January 2016) for Zone 2/3
enhancements.
5.8 For assemblies with all components fully bonded in place, the maximum design pressure for the selected assembly
shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No rational analysis is
permitted for these systems.
5.9 For mechanically attached insulation or membrane over existing roof decks, fasteners shall be tested in the existing
deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the minimum
requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing Application
Standard TAS 105.
5.10 For bonded insulation or membrane over existing substrates in a re -roof (tear off) or recover installation, the existing
ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application 5tanaara iAD lcq snaii oe conuucteu on
mock-ups of the proposed new roof assembly.
5.11 For bonded insulation or membrane over existing substrates in a recover installation, the existing roof system shall
be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having
Jurisdiction, as documented through field uplift testing in accordance with ASTM E907, FM Loss Prevention Data
Sheet 1-52 or Testing Application Standard TA5124.
5.12 Metal edge attachment (except gutters), shall be designed and installed for wind loads in accordance with FBC
Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1 or Roofing Application Standard RAS ill,
except the basic wind speed shall be determined from FBC Figure 1609.3(1),1609.3(2) or 1609.3(3).
5.13 All products in the roof assembly shall have quality assurance in accordance with FAC Rule 61G20-3.
6.1 Polyglass Modified Bitumen Roof Systems shall be installed in accordance with Polyglass USA, Inc. published
installation instructions, subject to the Limitations / Conditions of Use noted herein.
6.2 System attachment requirements for wind load resistance are set forth in Appendix 1. "MDP" = Maximum Design
Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects the ultimate
passing pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already been applied). Refer to FBC
1609 for determination of design wind loads.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
Contact the noted QA agency for information on product locc
QUALITY ASSURANCE ENTITY:
UL LLC— QUA9625; (314) 578-3406, k.chancellor@us.ul.com
covered for F.A.C. Rule 61G20-3 QA requirements
- THE 65-PAGES THAT FOLLOW FORM PART OF THIS EVALUATION REPORT -
NEMO ETC, LLC Evaluation Report P9290.02.08-R21
certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION FL1654-R23
Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Revision 21:10/08/2018
Page 4 of 4
"NEM01btC.
APPENDIX 1:
ATrACHMENT REQUIREMENTS FOR •
, UPLIFT RESISTANCE'
'APPLICATION '` �':
TYPE'1 s
1+ .;„'.
I t '
i,. ,'%'DESCNIPTION� '"'�•f�.,,.' ° x 3\d'eitis�; a u ^'
e_- _.. . .....
a �;iPA'GE'� '" ..
TABLE
DECK
SA
Wood
New or Reroof (Tear -Off)
A-1
Banded Insul
tion,
onded Roof Cover
5
SB
Wood
New or Reroof (Tear -Off)
A-2
Mech. Attached
A c or Sheet, Bonded Insulation, Bonded Roof Cover
5-9
SC
Wood
New, Reroof (Tear -Off) or Recover
A-2
Mech. Attached
Anchor Sheet, Bonded Insulation, Bonded Roof Cover
10-11
1D
Wood
New, Reroof (Tear -Off) or Recover
B
Mech. Attached
B
s Insulation, Banded Top Insulation, Bonded Roof Cover
12
1E
Wood
New, Reroof (Tear -Off) or Recover
C
Mech. Attached
Ips.
lation, Bonded Roof Cover
12-14
1F
Wood
New, Reroof (Tear -Off) or Recover
D
Insulated, Mich.
t ched Base Sheet, Bonded Roof Cover
15-17
SG
Wood
New or Reroof (Tear -Off)
E
Non -Insulate
; M
c . Attached Base Sheet (nails), Bonded Roof Cover
18-21
SH
Wood
New, Reroof (Tear -Off) or Recover
E
Non -Insulated;
M
ch. Attached Base Sheet (screws & plates), Banded Roof Cover
21-25
11
Wood
New or Reroof (Tear -Off)
F
Non -Insulated; Bdn
ed Roof Cover
26
2A
Steel or Structural concrete
New, Reroof (Tear -Off) or Recover
B
Mech. Attached das4
Insulation, Bonded Top Insulation, Bonded Roof Cover
27-29
2B
Steel or Structural concrete
New, Reroof (Tear -Off) or Recover
C
Mech. Attac ed I
s lation, Banded Roof Cover
30-34
2C
Steel or Structural concrete
New, Reroof(Tear-Off) Recover
D
Insulated, MGih.
ched Base Sheet, Bonded Roof Cover
35-37
3A
Structural concrete
New or Reroof (Tear -Off)
A-1
Bonded Insulatioq,
Bonded Roof Cover
3846
3B
Structural concrete
New or Reroof (Tear -Off)
F
Nan -Insulate
, B4ncied
Roof Cover
46
4A
Lightweight concrete
New or Reroof (Tear -Off)
A-1
Bonded Insulatioq,
onded Roof Cover
47-49
4B
lightweight concrete
New or Reroof (Tear -Off)
A-2
Mech. Attacted
nc
or Sheet, Bonded Insulation, Bonded Roof Cover
50
4C
Lightweight concrete
New or Reroof (Tear -Off)
E
Non -Insulate
11 M
c . Attached Base Sheet, Banded Roof Cover
51-53
SA
Cementitious wood fiber
New or Reroof (Tear -Off)
A-1
Bonded Insuijailon,
Oonded Roof Cover
54
5B
Cementitious wood fiber
New, Reroof (Tear -Off) or Recover
A-2
Mech. AttacFed
qn'
hor5heet, Bonded Insulation, Bonded Roof Cover
55
5C
Cementitious wood fiber
New, Reroof (Tear -Off) or Recover
B
Mech. Attac
ed gasR
Insulation, Bonded Top Insulation, Bonded Roof Cover
56
5D
Cementitious wood fiber
New, Reroof (Tear -Off) or Recover
C
Mech. Attac
dd 165
lation, Bonded Roof Cover
56
SE
Cementitious wood fiber
New, Reroof (Tear -Off) or Recover
E
Non -Insulated;
Mec
. Attached Base Sheet, Bonded Roof Cover
56
6A
Existing gypsum
Reroof (Tear -Off)
A-1
Bonded Insu1a,
la ,
onded Roof Cover
57-59
6B
Existing gypsum
Reroof (Tear -Off) or Recover
A-2
Mech. Attac
dd An4hor
Sheet, Bonded Insulation, Bonded Roof Cover
59
6C
Existing gypsum
Reroof (Tear -Off) or Recover
C
Mech. Attached
I
si lation, Banded Roof Cover
60
6D
Existing gypsum
Reroof (Tear -Off) or Recover
E
Non -Insulated,
Mac
I. Attached Base Sheet, Bonded Roof Cover
60
7A
Various
Recover
A-1
Bonded Insu atlo ,.
onded Roof Cover
61-65
78
Various
Recover
F
Non-Insulat d, B
d ed Base Sheet, Bonded Roof Cover
65
The following notes apply to the systems outlined herein:
1. The roof system evaluation herein pertains to above -deck roof components. Roof decks and structural
Load resistance of the roof deck shall be documented through proper codified and/or FBC Approval doe
2. Insulation / base sheet fasteners shall be of sufficient length for the following deck engagement:
➢ Wood: Minimum 0.75-inch penetration.
• Steel: Minimum 0.75-inch penetration and engage the top flute of the steel deck.
➢ Structural concrete: Minimum 1-inch embedment Into pilot hole in accordance with fastener ma
accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction.
Installation Instructions.
NEMO ETC, LLC I I Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVH71 EVIL ATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systeps; a9 4) 233-1330 Appendix 1, Page 1 of 65
3. Unless otherwise noted, Insulation may be any one layer or combination of polyisocyanumte, polystyrene, wood fiberl
of F.A.C. Rule 61G20-3 and is documented as meeting FBC 1505.1 and, for foam plastic, FBC Chapter 26, when Install
4. Minimum 200 psi, minimum 2-Inch thick lightweight Insulating concrete may be substituted for rigid Insulation board
fasteners are installed through the LWIC to engage the structural steel or concrete deck. The structural deck shall be
members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. Lc
documentation.
S. Preliminary insulation attachment for System Type D: Unless otherwise noted, refer to Section 2.2.10.1.3 of FM Loss
6. Unless otherwise noted, insulation adhesive application rates are as follows. Ribbon or bead width is at the time of E
➢ Hot asphalt (HA): Full coverage at 25-30lbs/square.
D Dow INSTA STIK Quik Set Insulation Adhesive (D-IS): Continuous 0.75 to 1-Inch wide ribbons, 12-Inch o.c.
D Millennium One Step Foamable Adhesive (M-OSFA): Continuous 0.25 to 0.5-inch wide ribbons, 12-Inch o.c.
➢ Millennium PG-1 Pump Grade Adhesive (M-PGI): Continuous 0.25 to 0.5-Inch wide ribbons, 12-Inch o.c.
➢ OMG OlyBond 500 (08500): Continuous 0.75 to 1-Inch wide ribbons, 12-Inch o.c. (PE
D OlyBond Classic (OB Classic): Full coverage at 1 gal/square.
D ICP Adhesive & Sealants Polyset CR-20: Continuous 2.5-3.5-Inch wide ribbons, 12-Inch o.c.
➢ Note: When multiple loyers(s) of insulation and/or coverboard are Installed In Abbonapplled adhesive, board/i
D Note: The maximum edge distance from the adhesive ribbon to the edge of the insulation board shall be not lee
7. Unless otherwise noted, all insulations are flat -stock or taper board of the minimum thickness noted. Tapered poly
Design Pressure (MDP) limitations. In no case shall these values be used to'increase'the MOP listings In the tables; r
thinner board listed below may be used as a drop -in for the equivalent thicker material listed in the table:
➢ Millennium One Step Foamable Adhesive (M-OSFA): MDP -157.5 psf (Min. 0.5-Inch thick)
➢ Millennium PG-1 Pump Grade Adhesive (M-PG1): MDP -157.5 psf (Min. 0.5-Inch thick)
➢ OMG OlyBond 500 (013500): MDP -45.0 psf (Min. 0.5-Inch thick Multi -Max FA-3;
D OMG OlyBond 500 (OB500): MDP -187.5 psi (Min. 0.5-inch thick ISO 95+GL)
➢ OMG OlyBond 500 (OB500): MDP -315.0 psf (Min. 0.5-inch thick ENRGY 3)
➢ OMG OlyBond 500 (OB500): MOP -487.5 psf (Min. 0.5-Inch thick ACFoam II)
➢ ICP Adhesives & Sealants Polyset CR-20: MDP -117.5 psf (Min. 1.0-Inch thick)
S. Bonded polyisocyanurate Insulation boards shall be maximum 4 x 4 ft.
9. For mechanically attached components or partially bonded Insulation, the maximum design pressure for the select d E
Chapter 16, and Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resit It
Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing Application Standard RA5137. Assemblies marked
Sheet 1-29 (January 2016) for Zone 2/3 enhancements.
10. For fully bonded assemblies, the maximum design pressure for the selected assembly shall meet or exceed critical desigr
11. For mechanically attached components over existing decks, fasteners shall be tested in the existing deck for withdra4al r
requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing Application Star
12. For existing substrates in a bonded recover or re -root Installation, the existing roof surface or existing roof deck shal be
roof system (for recover) shall be capable of resisting project design pressures on Its own merit to the satisfaction f tl
ANSI/SPRI IA-1, ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard 1A5124.
13. For Recover Applications using System Type D, the insulation is optional; however, the existing roof system shall be delta
NEMO ETC, LLC
Certificate of Authorization #32455 6m EDITION (2017) FBC NON-HVHZ EW
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (
ONEMOletc.
Cite, gypsum -based roof board or mineral -wool roof board that meets the OA requirements
ie roof cover.
m Type D (mechanically attached base sheet, bonded roof cover), whereby the base sheet
or greater configuration to the steel and concrete deck listings. Roof decks and structural
ince of the roof deck shall be documented through proper codified and/or FBC Approval
Data Sheet 1-29 (January 2016).
the ribbons/beads shall expand as noted in the manufacturers published Instructions.
SpotShot). Note: OlyBond Green maybe used where O1yBond50O1s referenced.
be staggered.
ribbonsspacing.
at the following thickness limitations may be substituted with the following Maximum
listing below meets or exceeds that listed for a particular system In the tables, then the
ably shall meet or exceed the Zone 1 design pressure determined in accordance with FBC
vated pressure criteria. Commonly used methods are ANSI/SPRI WD3, FM Loss Prevention
an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data
determined in accordance with FBC Chapter 16, and no rational analysis is permitted.
A qualified design professional shall review the data for comparison to the minimum
dned for compatibility and bond performance with the selected adhesive, and the existing
ithorlty Having Jurisdiction, as documented through field uplift testing In accordance with
rr a recover application.
Evaluation Report P9290.02.08-R21 for FL3654-R23 -
rION Revision 21: 10/08/2019
233-1330 Appendix 1, Page 2 of 65
14. Lightweight Insulating Concrete (LWC) shall be cast in accordance with FBC Section 1917 to the satisfaction of th
Product Approval for specific deck construction and limitations. Unless otherwise noted, for systems where specifi
thickness Is 2-Inches. For LWC over structural concrete, reference is made to FBC Section 1917.4.1, Point 1. For";
using only foaming agent (ASTM C896), water and Portland cement (ASTM C350), with no proprietary additives, in
use of these listings in new construction or re -roof (tear -off) applications is at the discretion of the Designer or Rec
15. Unless
noted refer to the following references for bonded base ply or cap sheet applications
ONEMof-etc.'
Having Jurisdiction. For systems where specific LWC is referenced, refer to current LWC
referenced, the minimum design mix shall be 300 psi. In all cases, the minimum top -coat
' LWC references, listings were established through testing over lightweight concrete cast
with procedures adopted by Miami -Dade BCCO (FBC CER1592). Unless otherwise noted,
hority Having Jurisdiction.
PoLYGLAss Rom, COVERS
REFERENCE .. -.
LAVER
_ _- , • . .,:..- ,... .. , AT RI
L;
'APPLICATION
BP -AA
Base Ply
One or more plies Polyglass G2 Base, FBC Approved ASTM D4601,
T e II
Hot Asphalt at 20-40
(Base and Ply sheets,
Ply
One or more plies Polyglass Ply IV, Polyglass Ply VI, FBC Approved
5TM D2178, Type IV or VI
Ibs/square
Asphalt -Applied)
Note:
Asphalt -applied sheets or Insulation shall not be applied to poly-
1 surfaced membranes.
Base Ply
One ply Elastobase (sand/sand), Elastoflex V, Elastoflex S6, Elasto
?g S6 Type II, Polyglass HT Base 650
PG350 at 1.5-2.0
SBS-CA3
Elastoflex VG, Elastoflex VG FR, Elastoflex 56, Elastoflex S6 Type II, EI
stoflex S6 G, Elastoflex S6 G FR) Elastoshield TS-G, Elastoshield
gal/square
Cap Ply
TS-G FR, Polyfresko G SBS (sand -backed), Polyfresko G SBS FRI(sa
'backed)
Base Ply
One ply Elastobase (sand/sand), Elastoflex V, Elastoflex 56, EI sto
!4 S6 Type II
Polyplus 35 at 1.5-2.0
SBS-CA2
Elastoflex VG, Elastoflex VG FR, Elastoflex S6, Elastoflex 56 Ty a II, EI
stoflex S6 G, Elastoflex 56 G FR, Elastoshield TS-G, Elastoshield
gal/square
Cap Ply
TS-G FR, Polyfresko G SBS (sand -backed), Polyfresko G SBS FR!(sa d-
acked)
One or more plies Elastobase (sand/sand or poly/sand), Elastgbas
(sand/sand or poly/sand), Elastoflex V, Elastoflex 56, Elastoflex
Base Ply or Ply
56 Type 11, Polyglass HT Base 650
Hot Asphalt at 20-40
SBS-AA
Elastoflex V, Elastoflex VG, Elastoflex VG FR, Elastoflex S6, Elastoll
'x
6 Type 11, Elastoflex S6 G, Elastoflex S6 G FR, Elastoshield TS-G,
Ibs/square
(SBS, Asphalt -Applied)
Cap Ply
Elastoshield TS-G FR, Polyfresko G SBS (sand -backed), Polyfresko
BS FR (sand -backed)
Note:
Asphalt -applied sheets or Insulation shall not be applied to
poly-
1 surfaced membranes.
One or more plies Elastobase (sand/poly), Elastobase (poly/p ly), El
stoflex V, Elastoflex S6, Elastoflex 56 Type II, Polyglass HT Base
SBS-TA
Base Ply or Ply
650
Torch -Applied
(505, Torch -Applied)
Elastoflex V, Elastoflex VG, Elastoflex VG FR, Elastoflex 56, Elasto ex
S6 Type 11, Elastoflex 56 G, Elastoflex S6 G FR, Elastoshield TS-
Cap Ply
G, Elastoshield TS-G FR, Polyfresko G SBS (poly -film backed), Pol re
ko G SBS FR (poly -film backed) i
Base Ply
One or more plies Elastoflex SA V Base, Elastoflex SAV FR Ba3e, E as
oflex SAV Plus, Elastoflex SA V Plus FR
SBS-SA
Cap Ply
Elastoflex SA P, Elastoflex SA P FR, Polyreflect I
I
Self -Adhering
(SBS, Self -Adhering)
Note:
Unless otherwise noted, permissible membrane substratesforS
S Aare limited to the SBS-SA Base Ply options herein,
Elostobase (poly/sand) or Elastobase (poly/poly).
PG350 1.5-2.0
APP-CA1
Cap Ply
Polyflex G FR
I
gal/square
are
APP-TA
Base Ply or Ply
One or more plies Polyglass APP Base, Polyflex, Polybond
Torch -Applied
(APP, Torch -Applied)
Cap Ply
Polyflex, Polyflex G, Polyflex G FR, Polybond, Polybond G, Polyfre kc
G, Polyfresko G FR
Cap Ply
Polyflex SA P, Polyflex SA P FR, Polyfresko G SA, Polykool
APP SA
Unless otherwisenoted, permissible membrane substratesfrrA Dp(SA
are limited to the SBS-SA Base Ply optionsherein,
Self -Adhering
(APP, Self-Adhering)Note:
Elastobase (poly/sand) or Elostobase (poly/poly).
NEMO ETC, LLC
Certificate of Authorization N32455
Prepared by: Robert Nieminen, PE-59166
6- EDITION (2017) FBC
Polyglass Modified Bitumen
Evaluation Report P9290.02.08-R21 for FL3654-R23
Revision 21: 30/OB/2018
1330 Appendix 1, Page 3 of 65
i
I
I �
16. Vapor barrier options for use over structural concrete deck followed by adhered Insulation carry the following Maxi mn Resign Pressure (MDP) limitatlo S.
applies: I 'I
OONEMOjetc.
The lesser of the MDP listings below vs. those in Table 3A
OPTION
#
PRIMER
VAPOR BARRIER OPTIONS; DECK;
VAPORBARRIEfl •'
`
i
(JJ `,,� .,ram. ;r'
INSU
i
f ) q ;� �H -- ..
TION ADHESIVE - I --�MDP,;(P$F)=
. „
TYPE"-— ; ,., j ,. ,
., `ATTACH, _
VB-1.
PG100
Elastoflex SA V Plus
Self -Adhering
� I to-Stik or CR-20,12-Inch o.c.
-60.0
VB-2.
PG1OD
Polyglass APP Base
Torchapplied
i I to-Stik or CR-20,12-Inch o.c.
-75.0
VB-3.
PG100
Elastoflex SA P
Self -Adhering
I sta-Stik, 12-Inch D.C. j
-75.0
VB-4.
PG100
Elastoflex SA P
Self -Adhering
I Alfiennium One Step Foamable Adhesive,
12-Inch D.C.
-157.5
VB-5.
PG100
Elastoflex SA P
Self -Adhering
R-20, 12-Inch o.c. 1
1-270.0
VB-6.
PGS00
Elastoflex SA V Base, Elastoflex SA V FR Base,
Elastoflex SA V Plus, Elastoflex SA V Plus FR
Self -Adhering
��11lllennium One Step Foamable Adhesive,
• Adhesive, OlyBend 500 or CR-20� 12-Inch
Millennium PG-1 Pump Grade
D.C.
-290.0
17. The following surfacing may be applied to the Cap Ply without adverse effect on the system wind load performance. Ref r o current Florida
application limitations and a Roofing Materials Directory for fire ratings associated with coating usage.
Option#
OPTIONSSURFACING
4 Surfacing - - - _�"
f>'Florida Pr du
Pproval
SURF-1.
PG300 Flbered Roof Coating
F 10
9
SURF-2.
PG600 Non-Flbered Aluminum Roof Coating
F 30
9
SURF-3.
PG650 Fibered Aluminum Roof Coating
FL30
9
SURF-4.
PG700 High Quality Elastomeric Roof Coating
FL10
9
SURF-5.
PG700QS (Quick Set) High Quality Elastomeric Roof Coating
FILICI
9
SURF-6.
PGSOD Asphalt Emulsion Roof Coating
FL30
9
SURF-7.
Polyplus 60 Premium Non-Fibered Aluminum Roof Coating
FLSO
9
SURF-B.
Polyplus 65 Premium Fibered Aluminum Roof Coating
Fj.10
9
SURF-9.
Polybrite 70 Premium Grade Elastomeric Roof Coating
F 30
9
SURF-10.
Polybrite 70QS (Quick Set) Premium Grade Elastomeric Roof Coating
FA
9
SURF-11.
Polybrite 71 HS
FL10
9
SURF-12.
Polybrite 90 High Solids Silicone Roof Coating
F 10
9
SURF-13.
Polybrite 95 Silicone Roof Coating
F 10
9
SURF-14.
KM Acryl 15
FL27
0
SURF-15.
KM Acryl 15 CIS
FL27
0
SURF-16.
KM Acryl 25
FL27.
0
SURF-17.
KM Acryl 25 OS
F 27 0
SURF-18.
KM Acry140 HS
FL2740
SURF-19.
KM Acry185
FL27 0
SURF-20.
KM PS#250
FL27 0
SURF-21.
KM PS#220
FL27 0
18. "MDP" = Maximum Design Pressure Is the result of testing for wind load resistance based on allowable wind loads.
for approved Polyglass and KM Coatings roof coatings for
�Ieslgn
1
1609 for determination of wind loads.
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-RZ3
Certificate of Authorization 02455 6n' EDITION (2017) FBC NON-HVHZIEV q i TION ' Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (95{i' 233-1330 Appendix 1, Page 4 of 65
ONEMOletc.
TABLE IA: ....
.. • .
SYSTEM TYPE A-1: BONDED INSULATION, BONDED
ROOF COVER
,.
System Deck Base Insulation Layer .• =' TOP insular
on Layer '_ ,ter ,j; ,Robf Cover (Note`35)� ry, "- ,,. MDP7
.. �..�
No.
(Note 1) 7YPe Attach, . , - Type
{ Attacth�- �
.base:Ply
!' , . Ply , ,',',' '
�
Cap PNIy+ `z
'• (Psfl, i
•a
t tj: n; �"+i �':.
�•. '+c•aei
Nct
r.. i, �_'{.i.�(Ik+
q�
k3 ��
SELFADHERING BASE PLYMin. _ is ;:'! n.:,1::•.iYif�Yl_.is. +E �T!,iv 4"n-v°(}_ r A
I,A�i'.
,S++i,
tF•,':,�ly .'1: ±;A,..�fr,P::vn
A�sMY7. nue
Min.1.5-Inch Polytherm, ACFoam 11, Polytherm G,
(Optional) additional'
D-IA,
(Optional) SBS-SA, SBS-TA,
SBS-SA, APP-SA,
W 1
inch plywood
Inch plywood
ACFoam III, ENRGY-3, Palytherm H, H-Shield, H-
OB5, 0 or CR-,
OB500 or CR-20
layers(s) of base insulatio
-20
SBS-SA
APP-TA
SBS-TA, APP-TA
-52.5
Shield CG, Multi -Max FA3
W 2
Min.
Min. 1.5-Inch Polytherm, ACFoam 11, Polytherm G,
ACFoam III, ENRGY-3, Polytherm H, H-Shield, H-
D-IS, M-OSFA,
(Optional) additional
ED-IS,M-OSFA,
Polyflex SA(Optional)
APP-TA
APP-TA
-52.5
Inch plywood
plywood
OB500 or CR-20
layers(s) of base Insulatio
-20
Base
Shield CIS, Multi -Max FA3
TABLE 1B: WOOD DECKS— NEW CONSTRUCTION
OR REROOF (TEAR -OFF)
SYSTEM TYPE A-2: MECHANICALLY D ANCHOR SHEET, BONDED
INSULATION,BONDED ROO
Anchor5heet '" • ' z .Base Insulation t
I } j .`.,Top Insulatior r - Roof;Cover (Note 13J t '.}
System Deck
No. (Note 1) Type Fasten-, Attach Type ` !r tte
YP
ppry'' --. y L t MDP p
r k 7ypery h' '.! Attach P ` Base yt,z-• Ply Wply y ^(p i,
"x
,`.,
;: Ls LPIY dulf7+.r
f Ie"'a t+ %V'6 ,4 `.
�"
ASPHALT-AFPLIED OR TORQf-APPUEO BASE PLY. i.Y i f�•�
i. .GNix£ Y F„1 ki , v ,�e
II �:'..m
... xi r,�. RvJ Tlv« �
� bt
9-inch o'c- at min. 2-
(Optional)
inch Fesm
Min.
Elastobase,
inch lap and 1&Inch
ACFca 11,
Polytherm, ACFoam II,
Board ho
Board (homogeneous) or
BP -AA
(Optional)
SBS-AA,
W-3
Inch
ElastabaseP
Simplex MAXX
o.c. at two (2),
ENRGY-3, Polytherm H,
Hot asph
It
min. 0.5-Inch Structodek
Hot
asphalt
or SBS-
BP-ASBS-AA
SBS-TA
-45.0
plywo
plywood
(sanded -top)
Cap
equallyspaced,
H-Shleld, H-Shield CG,
High Density Fiberboard
AA
SBS-AA
APP-TA
staggered center
Multi -Max FA3
Roof Insulation
rows
9-Inch o.c- at min. 2-
Inch lap and 18-inch
(Optional) Min.1.5-Inch
Min. 0.25-Inch Dens
BP -AA,
(Optional)
W4
Min.
15/32-Inch
Elastobase,
ElastobaseP
SimplexMAXX
at two (2),
Polytherm, ACFoam 11,
ENRGY-3, Polytherm H,
Hot asphalt
Deck, Dens Deck Prime,
Hot
SBS-AA,
BP -AA, SBS-
SBS-AA,
SBS-TA,
-05.0•
plywood
(sanded -top)
Cap
equally
equallyspaced,
H-Shield, H-Shield CG,
SECUROCK Gypsum -Fiber
asphalt
SBS-TA,
AA, SBS-TA,
APP-TA
staggered center
Multi -Max FA3
Roof Board
APP-TA
APP-TA
rows
9-inch o.c. at min. 2-
(olytherm) Min-
esco
Min- 0(homog
Min.
Elastobase,
inch lap and 12-Inch
ACFoam
Polytherm, ACFoam II,
neon
Board (homogeneous) or
Hot
BP-AA
(Optional)
585-AA,
W-5
15/32-Inch
ElastabaseP
Simplex MAXX
o(2),
o.c. at twllyspaced
ENRGY-3, Polytherm H,
Hot asph
It
min. 0.5-Inch Structodek
ar SBS-
BP-AAhr
585-TA,
-52.5
plywood
(sanded -top)
Cap
equa,
H-Shield, H-Shield CG,
High Density Fiberboard
asphalt
AA
SBS-AA
APP-TA
staggered center
Multi -Max FA3
Roof Insulation
rows
9-Inch o.c. at min. 2-
Inch lap and 12-Inch
(Optional) Min. 1.5-Inch
Min. Dens
BP-ASBS-A,
(OptioBP-AA,
Min.
Elastobase,
Simplex MAXX
o.c. at two (2),
Polytherm, ACFoam II,
Alt
Deck Dens Deck Prime,
Dens
Hot
SBS-AA,
B
BP -AA, SBS-
SBS-AA,
5B5-TA,
-52.5
W-6
15/32-Inch
ElastabaseP
Cap
equallyspaced,
ENRGY-3, Polytherm H,
Hat asp
I�
SECUROCK Gypsum -Fiber
asphalt
SBS-TA,
AA, SBS-TA,
plywood
(sanded -top)
staggered center
H-Shleld, H-Shleld CG,
Roof Board
APP TA
APP-TA
APPTA
Multi -Max FA3
rows
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVAL
ATION Revision 21:10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems;
(9 4) 233-1330 Appendix 1, Page 5 of 65
I ON EMo etc.
TABLE IB: WOOD DECKS -NEW CONSTRUCTION
OR REROOF(TEAR-OFF)
SYSTEMTYPEA-2: MECHANICALLY ATTACHED ANCHOR SHEET, B014DED
INSULATION, BONDED ROOF COVER
' Anchon5heetbase insulation
F1'^ 3'r1� a7;}Topinsulatide�rl yer (No(e�15)/" to "MDP�
System
No.
(Deck)
Note 1
Type
Fasten
Attach
.TYPe. - -'
�' Atta
e
-
q .. Type ...- w..
-
i Attach ,c
,4 Base
,y ., ' P
I- PIY ' :r..OaPpiy _
+'`. .
r ,(PsQ.:_
pty
Polyglass G2 Base,
Elastobase,
32 ga., 1-5/8-
8-Inch o.c. at min. 4-
(Optional) Min. 1.5-Inch
Min. 0.75-Inch Fesco
Min.
Elastobase P
(sanded -top),
Inch diameter
Inch lap and 8-inch
Polytherm, ACFoam II,
Board (homogeneous) or
)
BP -AA
(Optional)
P
SBS-AA,
W-7
19/32-inch
Certaln7eed
tin caps with
equall three (3),
equallyspaced,
Polytherm3, ACFoam
III, ENRGY-3, Polytherm
Hot asphat
min. 0.5-Inch Structodek
Hot
asphalt
or SBS-
BP -AA or
SBS-TA,
-60.0
plywood
Glasbase, Firestone
11 ga. annular
staggered center
l
H,
High Density Fiberboard
AA
SBS-AA
APP-TA
MB Base,JM Perms-
ring shank nails
rows
Multi- ax FA3
CG, Multi -Max FA3
Roof Insulation
Ply 28, Tamko Glass
,
Base or GAFGLAS #75
Polyglass G2 Base,
Elastobase,
32 ga., 1-5/8-
8-Inch o.c. at min.4
(Optional) Min.1.5-Inch
Min.
Elastobase P
(sanded -top),
Inch diameter
Inch lap and 8-Inch
o.c. at three(3),
Polytherm, ACFoam II,
Polytherm G; ACFoam
Min. 0.25-Inch Dens Deck
Hot
BP -AA,
SBS-AA,
(Optional)
BP-AA,SBS-
SBS-AA,
W-8
inch
Certal eed
tin ca.
equally spaced,
III, ENRGY-3, Polytherm
Hot asphat
CK
asphalt
SBS-TA,
AA, SBS-TA,
SBS-TA,
-60.0
plywood
plywood
Glasbase, Firestone
s
11 ga. annular
annf
staggered center
H, H-Shield, H-Shleid
Gypsum -Fiber Roof Board
GypsuPrimem-Fiber
APP-TA
APP-TA
APP TA
MB Base, JM Perms-
ring shank nails
rows
CG, Multi -Max FA3
Ply 28, Tamko Glass
Base or GAFGLAS D75
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
l
Min. 0.75-Inch Fesco
Min.
Ela
4-Inch lap and 12-
Polytherm, ACFoam 11,
('I
Board (homogeneous) or
Hot
BP -AA
(Optional)
SBS-AA,
W-9
19/32-Inch
Elastobase P
Simpler MA)0(
inch o.c at two (2),stobase,
ENRGY-3, Polytherm H,
Hot aspha
t
min. 0.5-Inch Structodek
asphalt
or SBS-
BP -AA or
SBS-TA,
-60.0
plywood
(sanded -top)
Cap Fasteners
equallyspaced,
H-Shleld ld CG,
High Density Fiberboard
AA
SBS-AA
APP-TA
staggered center
FA3
Multi -Max FA3
Roof Insulation
rows
12-Inch o.c. at min.
4-Inch lap and 12-
(Optional) Min. 1.5-Inch
I
i ,
Min. 0.25-Inch Dens
BP -AA,
(Optional)
W-10
Min.
19/32-Inch
Elastobase,
Elastobase P
Simplex MAXX
Inch o.cat two (2),
Polytherm, ACFoam II,
ENRGY-3, Polytherm H,
Hot aspha
1
t i
Deck, Dens Deck Prime,
Hot
SBS-AA,
BP -AA, SBS-
SBS AA,
SBS-TA,
-60.0
(sanded -top)
Cap Fasteners
equally spaced,
H-Shield, H-Shleid CG,
SECUROCK Gypsum -Fiber
asphalt
SBS-TA,
AA, SBS-TA,
APP-TA
PP T
plywood
staggered center
Multi -Max FA3
Roof Board
APP-TA
APP-TA
rows
32 ga 1-5/8-
8-Inch o.c. at min.4
Inch lap. 8-Inch
(Optional) Min. 1.5-Inch
BP -AA,
(Optional)
)
Min.
Elastobase,
Inch diameter
f
o.c. at our (4),
Polytherm, ACFoam II,
Min. 0.25-Inch Dens Deck
Hat
S85-AA,
BP -AA, SBS-
5B5-AA,
W-11
15/32-Inch
Elastobase P
tin caps with
equally spaced,
ENRGY-3, Polytherm H,
Hot asphat
Prime, CK
asphalt
SBS-TA,
AA, SBS-TA,
SBS-TA
-67.5
plywood
(sanded -top)
12 ga. annular
staggered center
H-Shield, H-Shield CG,
-Fiber
Gypsum -Fiber Roof Board
APP-TA
APP-TA
APP-TA
ring shank nails
Multi -Max FA3
rows
r
i
Ij
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 61e EDITION (2017) FBC NON-HVHZ EVA
U NTION Revision 21:10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (Q
) 233-1330 Appendix 1, Page 6 of 65
I
NNEMOiItc.'
TABLE 113: ....
..
SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET, BON
DED INSULATION, BONDED ROOF COVER
Anchorsheet '" ^ �:'y'.Base Insulation,
li,Ml Top Insulation` ' RooLCoyer (Note15) d
System Deck
No. (Note I) Type Fasten Attach .Attach
-MDP
'- Base ; 4 - : �4 — u
-':Type , Attach, -, , " Ply Gp Ply, -(psi
- ,Type
l
Piy
_ _
9-Inch o.c. at min. 4-
Inch lap and 9-Inch
(Optional) nch
BP -AA,
(Optional)
Min.
Simplex MAXX
o.c. at four (4),
ACFoam 11,
Polytherm, ACFoam ll,
i
Min. 0.25-Inch Dens Deck
Hot
SBS-AA,
BP-AA,SBS-
SBS-AA,
W-12
Inch
Polyglass G2 Base
Cap
equally spaced,
EN Polytherm
Hot asph
It
Prime, CK
asphalt
SBS-TA,
AA, SBS-TA,
,
-82.5
plywood
plywood
staggered center
Meld
H-Shield, H-Shield CG,
,
-Fiber
Gypsum -Fiber Roof Board
APP-TA
APP-TA
APP-T
APP TA
Multi -Max FA3
rows
Polyglass G2 Base,
32 ga., 1-5/8-
6-Inch o.c. at min. 4-
(Optional) Min. 1.5-Inch
BP -AA,
(Optional)
Min.
Elastobase,
Inch diameter
Inch lap and 6-Inch
Polytherm, ACFoam II,
Min. 0.25-Inch Dens Deck
Hot
SBS-AA,
BP -AA, SBS-
SBS-AA,
W-13
15/32-Inch
tin caps with
o.c. at flue (5) equally
ENRGY-3, Polytherm H,
Hot asph
It
Prime, SECUROCK
asphalt
SBS-TA,
AA, SBS-TA,
5B6-TA,
-90.0
plywood
Elastobase P
12 ga. annular
spaced, staggered
H-Shield, H-Shield CG,
Gypsum -Fiber Roof Board
APP TA
APP TA
APP-TA
(sanded -top)
ring shank nails
center rows
Multi -Max FA3
6-inch o.c. at min. 2-
Inch lap and 6-Inch
(Optional) Min. 1.5-Inch
BP -AA,
(Optional)
Min.
Elastobase,
Simplex MAXX
o.c. at two (2),
Polytherm, ACFoam Il,
ENRGY-3, Polytherm H,
Hot asphalt
Min. 0.25-Inch Dens Deck
Prime, CK
Hot
SBS-AA,
BP -AA, SBS-
SBS-AA,
SBS-TA
-90.0
W-14
15/32-Inch
ElastabaseP
( sanded -top)
Cap
equally spaced
H-Shield, H-Shield CG,
-Fiber
Gypsum -Fiber Roof Board
asphalt
SBS-TA,
AA,SBS-TA,
APP TA
plywood
staggered center
MuItI-Max FA3
APP-TA
APP-TA
rows
32 ga., 1-5/8-
6-Inch o.c. at min.4-
Inch lap and 6-Inch
Min. 2-inch Polytherm,
D-IS, CBS
0
Min. 0.25-Inch Dens
D-IS,
BP -AA,
(Optional)
Min.
Elastobase,
inch diameter
o.c. at four (4),
ACFoam Il, III,
CR-20 or
wig-
Deck, Dens Deck Prime or
OB500,
SBS-AA,
BP -AA, SBS-
SBS-AA,
SBS-TA,
-60.0•
W-15
Inch
ElastabaseP
tin caps with
equally spaced,
Polytherm H, H-Shield,
q
pi
SECUROCK Gypsum -Fiber
CR-20 or
SBS-TA,
AA, SBS-TA,
plywood
plywood
(sanded -top)
12 ga. annular
staggered center
Multi -Max
fastener
fastener
ro s,
Roof Board
M-OSFA
APP-TA
APP-TA
APP TA
ring shank nails
FA3 orld R
FA3 orENRGY-3
7-Inch o..
rows
5r1F-AdNERIXG
BAiE PLY:vYF
„ L. c. .h. .a. .c>tiw s_E
,..
,m,J
.�•.
•'
-.1 °.:v .. aY=,
•r .=�.
,..C;,.C,(_T A�i?r-aSw
rSBS-SA,µ
.-P«AC'f.
'
9-Inch o.c. at min. 2-
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens'
Min.
Elastobase,
Simplex MAXX
Inch lap and 38-Inch
Polytherm, ACFoam 11,
Dens Deck Prime,
Hot
(Optional)
APP SA,
-05.0•
W-I6
15/32-Inch
Elastobase P
Cap
o.c. at two, equally
ENRGY-3, Polytherm H,
Hot asph
It
SECURDeck,
CK Gypsum-Fiher
asphalt
SBS-SA
SBS-
SBS-TA,
plywood
P
(sanded -top)
spaced, staggered
H-Shield, H-Shield CIS,
Roof Bo
Roof Board
TA, AP,
TA APP TA
APP-TA
center rows
Multi -Max FA3
9-Inch o.c. at min. 2-
(Optional) Min.1.5-Inch
Min. 0.25-Inch Dens
W-17
Min.
15/32-Inch
Elastobase,
Elastobase P
Simplex MAXX
Inch lap and 18-Inch
o.c. at two, equally
Polytherm, ACFoam II,
ENRGY-3, Polytherm H,
Hot asph
It
Deck, Dens Deck Prime,
Hot
Pal Flex
Y
(Optional)
)
-45.0•
plywood
(sanded -top)
Cap
spaced, staggered
P
H-Shield, H-Shield CG,
SECUROAPP-TA
Roof BOCK Gypsum -Fiber
Roof Board
asphalt
SA Base
APP-TA
center rows
Multi -Max FA3
9-Inch o.d. at min. 2-
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens
SBS-SA,
Min.
Elastobase,
Simplex MAXX
Inch lap and 12-Inch
Polytherm, ACFoam II,
` I
I
Deck, Dens Deck Prime,
Hot
(Optional)
APP-SA,
W-18
15/32-Inch
Elastobase P
Cap
o.c. at two, equally
ENRGY-3, Polytherm H,
Hot asph
It
SECSBS-SA
CK Gypsum -Fiber
'Roof
asphalt
SBS-SA, SBS-
SBS-TA,
-52.5
plywood
(sanded -top)
spaced, staggered
H-Shield, H-Shleld CG,
I
Bo
Roof Board
TA APPTA
APP-TA
center rows
Multi -Max FA3
NEMO ETC, LI.0
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization H32455 6TM EDITION (2017) FBC NON-HVHZ EV
L ATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems;
1
9 4) 233-1330 Appendix 1, Page 7 of 65
i
ONEMOletc.
WOOD .
RO • .
ATTACHEDSYSTEMTYPEA-2: MECHANICALLY . .• SHEET, BONDED
BONDED ROO
Anchor5heet ". f"I It on
;!r'_ 1+ `..Top°Insulationx `f I " "Roof'Cover (Note`35) k N� �� r
..Base ,
System Deck
�,;'
f.PIYP PIYfPSO
No. (Note I) Type Fasten Attach I , TyPer r AKa
siype
9-Inch o.c. at min. 2-
(Optional) Min. 1.5-Inch
MIn. 0.25-Inch Dens
Min.
Elastobase,
MA%X
inch lap and 12-Inch
Polytherm, ACFoam II,
Deck, Dens Deck Prime,
T
O tionalSimplex
( P )W-19
15/32-Inch
ElastobaseP
Cap
o.c. a[two, equally
ENRGY-3, Polytherm H,
Hot asphatl
SECUROCK Gypsum -Fiber
APP-TA
APP-TA
-52.5
plywood
(sanded -top)
spaced, staggered
H-Shield, H-Shield CG,
Roof Board
center rows
Multi -Max FA3
Polyglass G2 Base,
Elastobase,
Elastobase P
32 ga., 1-5/8-
8-Inch o.c. at min. 4.
Inch lap and 8-Inch
(Optional) MR. 1.5-inch
Polytherm, ACFoam II,
Mr. 0.25-Inch Dens
SOS -SA,
Min.
(sanded -top),
Inch diameter
three (3),
Polytherm3, ACFoam
Deck, Dens Deck Prime,
Hat
(Optional)
APP SA,
W-20
19/32-Inch
CertalnTeed
tin caps with
equall
equally spaced,
III, ENRGY-,,
Hot aspha
t
1
Gypsum -Fiber
asphalt
SBS-SA
SBS-SA, SBS-
SBS-TA,
-60.0
plywood
Glasbase, Firestone
11 ga. annular
staggered center
H, -Sh[elemn
Roof Board
Roof Board
TA, APP-TA
APP-TA
MB Base, IM Forms-
ring shank nails
rows
Multi- ax FA3
CG, Multi -Max FA3
Fly 28, Tamko Glass
,
Base or GAFGIAS #75
Palyglass G2 Base,
Elastobase,
ga.,1-5/8-
8-Inch o.c. at min. 4-
(Optional) Min. 1.5-Inch
Elastobase
Inch lap and B-Inch
Polytherm, ACFoam II,
Min. 0.25-Inch Dens
Min.
(sanded -top))
In, Inch diameter
o.c. at three (3),
Polytherm G, ACFoam
I
Deck, Dens Deck Prime,
Hot
Polyflex
(Optional)
APP-TA
-60.0
W41
Inch
CertalnTeed
tin caps with
equally spaced,
III, ENRGY-3, Polytherm
Hot asphaf
SECUROCK Gypsum -Fiber
asphalt
SA Base
APP-TA
plywood
Glasbase, Firestone
11 ga, annular
staggered center
H, H-Shleld, H-Shleld
RoofRoof Board
ME, Base,1M Perma-
ring shank nails
rows
CG, Multi -Max FA3
Ply 28, Tamko Glass
Base or GAFGIAS #75
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
I
Min.
Elastobase,
4-inch lap and 12-
Polytherm, ACFoam II,
MIn. 0.25-Inch Dens
(Optional)
SBS-SA,
W-22
19/32-Inch
ElastobaseP
Simplex MAX%
Inch o.c at (2),
ENRGY-3, Polytherm H,
Hot asphatl
Deck Dens Deck Prime,
Hot
SBS-SA
505-SA, SBS-
ABS-TA'
-60.0
plywood
(sanded -top)
Cap Fasteners
equally spaced,
i-MaH-Shleld CG,
li
SECUROCKGypsum-Fiber
asphalt
TA, APP-TA
SBS-TA,
staggered center
Multi-Max
Multi -Max FA3
Roof Board
APP-TA
rows
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Mln.
Elastobase,
Simplex MAXX
4-Inch lap and 12-
Inch o.c. at two (2),
Polytherm, ACFoam II,
'
MIn., Den Inch Dens
Deck, Dens Deck Prime,
Hot
Polyflex
(Optional)
W-23
19/32-Inch
Elastobase P
Cap Fasteners
equally spaced,
ENRGY-3, Polytherm H,
Hot alpha
t
SECUROCK Gypsum -Fiber
asphalt
SA Base
APP-TA
APP-TA
-60.0
plywood
(sanded -top)
staggered center
H-Shield, H-Shield CG,
I
Roof Board
Multi -Max FA3
rows
32ga., 1-5/8-
8-Inch o.c. at min. 4-
(Optional) Min. 1.5-Inch
PolVglBase,
Inch diameter
Inch lap and B-Inch
Polytherm, ACFoam II,
Min. 0.25-Inch Dens Deck
Ho[
Polyflex
(Optional)
W-24
IS/32-Inch
Elastobase,
Elastobase,
e,
ElastobaseP
tin capswith
o.c, at four (4),
equally spaced,
ENRGY-3, Polytherm H,
Hat alpha
t
Prime, SECUROCK
asphalt
SA Base
APP-TA
APP-TA
-67.5
plywood
(sanded -top)
12 ga. annular
staggered center
H-Shfeld, H-Shield CG,
j
Gypsum-Fiberfloof Board
ring shank nails
Multi -Max FA3
rows
�
Evaluation Report P9290.02.08-R21 for 1111654R23
NEMO ETC, LLC
Certificate of Authorization #32455 fir" EDITION (2017) IBC NON -HVHZ EVA
U TION Revision 21: 10/09/2016
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Raof Systems; (1S
1233-1330 Appendix 1, Page B of 65
"NEM01'etc.
TABLE 113: ... r CONSTRUCTION
.R
... .
SYSTEIVITYIPEA-2:
MECHANICALLY
ATTACHED ANCHOR SHEET,
BONDED
INSULATION, BONDED ROOF COVER
i !a- `- Blnsulacm '";
. Anchor5heet tF , ase _
'
1 r". r r { '„Top Insulation rl yo , s 1 Roof,Cover (Note l9) "t
MOP
System
No.
Deck
(Note 1)
Type
fasten
Attach
Type
-''.` Atta
i
h.
s Type
Attach
I
, Vey
r p S
9-inch o.c. at min. 4.
(Optional) Min. 1.5-Inch
Min.
Simplex MAXX
Inch lap and 9-Inch
o.c. at four (4),
Polytherm, ACFoam 11,
Min. 0.25-Inch Dens Deck
Hot
Polyflex
(Optional)
W-25
Inch
Polyglass G2 ease
Cap
equallyspaced,
ENRGY-3, Palytherm H,
Hot asp h
It
Prime, CK
asphalt
SA Base
APP-TA
APP-TA
-82.5
plywood
plywood
H-Shield, H-Shield CG,
�1.�
-Fiber
Gypsum -Fiber Roof Board
staggered center
Multi -Max FA3
rows
32 ga.,1-5/8-
6-inch o.c at min. 4-
(Optional) Min.1.5-Inch
Min.
Polyglass G2 Base,
Inch diameter
inch lap and 6-Inch
Polytherm, ACFoam II,
1
�It
Min. 0.25-Inch Dens Deck
Hot
PolyBex
(Optional)
W-26
15/32-Inch
Elastobase,
tin caps with
o.c. at flue (5) equally
ENRGY-3, Polytherm H,
Hot asph
Prime, SECUROCK
asphalt
5A Base
APP-TA
APP-TA
-90.0
plywood
Elastobase P
12 ga. annular
spaced, staggered
H-Shleld, H-Shleld CG,
Gypsum -Fiber Roof Board
(sanded -top)
ring shank nails
center rows
Multi -Max FA3
6-inch o.c. at min. 2-
(Optional) Min. 1.5-Inch
Min.
Elastobase,
Simplex MAXX
Inch lap and 6-Inch
o.c. at two (2),
Polytherm, ACFoam II,
I
Min. 0.25-Inch Dens Deck
Hot
POIBase
(Optional)
W-27
15/32-inch
Elastobase P
Cap
equallyspaced,
ENRGV-3, Polytherm H,
Hot asph
Ij
Prime, SECUROCK
asphalt
SA Base
APP-TA
APP-TA
-90.0
plywood
(sanded -top)
staggered center
H-Shield, H-Shield CG,
Gypsum -Fiber Roof Board
Multi -Max FA3
rows
32ga.,1-5/8-
6-Inch o.c. at min. 4-
Inch lap and 6-Inch
Min. 2-Inch Polytherm,
D-IS,OB
0,
D-IS,
SBS-SA,
Min.
Elastobase,
Inch diameter
o.c. at four (4),
ACFoam II, III,
H-Shleld,
CR-20 or
OSFA,
NI
p
(Optional) Additional
0,
SBS-SA
(Optional)
SBS-SA, SBS-
APP SA,
-60.0•
W-28
19/32-Inch
Elastobase P
tin caps with
equally spaced,
Polytherm H,
at
layers of base Insulation
CR-2OB5
r
TA, APP-TA
SBS-TA,
plywood
(sanded -top)
12 ga. annular
staggered center
H-Shield CG, Multi -Max
fastener
o s,
M-OSF
M-OSFA
APP-TA
ring shank nails
FA3 or ENRGV-3
7-Inch o..I
rows
32 ga., 1-5/8-
6-lnch o.c. at min. 4-
Min. 2-Inch Polytherm,
D-IS' OB50
,
D-IS,
Min.
Elastobase,
Inch diameter
inch lap and 6-Inch
o.c. at four (4),
ACFoamII, III,
CR-20 o
OSFA,
M
(Optional) Additional
OB500,
PolyFlez
(Optional)
APP-TA
-60.0•
W-29
19/32-Inch
Elastobase P
tin caps with
equally spaced,
Polytherm H, H-Shield,
at
p
la ers of base Insulation
Y
CR-20 or
SA Base
APP-TA
plywood
(sanded -top)
12 ga. annular
staggered center
H-Shield CG, Multi -Max
fastener
ro s,
M-OSFA
ring shank nails
FA3 or ENRGY-3
7-Inch ol'I
rows
NEMO ETC, LLC
i
I
i
I
Evaluation Report P9290.02.08-1121 for FL1654R23
Certificate
of Authorization #32455
6"' EDITION (20171 FBC NON-HVH2 hViALPArION
Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166
Polyglass Modified Bitumen Roof Systems,
(9 4) 233-1330
Appendix 1, Page 9 of 65
i
i
ONEMOletc.
TABLE IC: WOOD .
.. RECOVER
SYSTEMTYPEA-2: MECHANICALLY ATTACHED ANCHORBON
DED INSULATION, ROOF COVER
System Deck Anchor Sheet - '• '` 8ase lnsulatlon t
�} '.I':7op Iniulatlorif- p , - (Roof Covei (Note35j' + r" ryjpp=
No. (Note 1) Type Fasten Attach
'Type
abh .,
<;aype
- Attach. `- Byars{e PIY'.n`' "Pty ' sl. Cap PIY' ":-
�` IPsf)
v
"ASPXAtT-APPLIED OR TORpi-APPDED BASE PLY:: '"( k 4 Y ,r .'y.,tS�a�i`..'_- F41�
} "�t� Ktl, Yea, ?,atY � SPµ
�i
ryy
`M +r"+�A �.tt lxA. dYrh';V'.
.R�v"^1,tY 11 i44 M'brt ARV e'a�1ti"O"Wy}.�Y�rk+,yrvi„
+�y ,S
v-
Dekfast Hex (aka, Dekfast
Polyglass G2
PIT-H-2-7/8) with Dekfast
10-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens
Min. 15/32-
Base,
f114, OMG 3" Round Metal
4-Inch lap and 30-
Polytherm, ACFoam II,
Deck, Dens Deck
BP -AA,
(Optional)
)
SBS-AA,
W-30
Inch
Elastobase,
Plate with HD,
Inch (3),
ENRGY-3, Polytherm H,
o
Prime, SECUROCK
Hot
SBS-AA,
BP-AA,$B5-
SBS-TA
-52.5
plywood
Elastobase P
Flat Bottom Plate (Attu[rac)
Plate
llyatthree
equallyspaced,
H-Shield, H-Shleld CG,
sp alt
Gypsum -Fiber Roof
asphalt
SBS-TA,
AA, SBS-TA,
APP-TA
(sanded -top)
with Roofgrlp g14 or Trufast
staggered center
Multi -Max FA3
Board
APP-TA
APP-TA
3" Metal Insulation Plate
rows
with Trufast HD.
I
12-Inch o.c. at min.
(Optional) Min. 1:5-Inch
Min. 0.75-Inch Fesco
Min. 19/32-
Elastobase,
4-Inch lap and 12-
Polytherm, ACFoam Il,
Board (homogeneous)
(Optional)
SBS-AA,
W-31
Inch
Elastobase P
OMG Flat Bottom Plates
Inch o.c. at two (2),
ENRGY-3, Polytherm H,
o
I
or min. 0.5-Inch
Hot
BP -AA or
BP -AA or
SBS-TA,
-60.0
plywood
(sanded -top)
(square) with Roofgrlp g12
equally spaced,
H-Shmull ld, H-Shleld CG,
sp
alt
Structodek High
asphalt
SBS-AA
SBS-AA
APP-TA
staggered center
Multi -Max FA3
i I
Density Fiberboard
rows
Roof Insulation
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Min: 0.25-Inch Dens
Min. 19/32-
Elastobase,
4:Inch lap and 12-
Polytherm, ACFoam II,
Deck, Dens Deck
BP -AA,
(Optional)
SBS-AA,
W-32
Inch
Elastobase P
OMG Flat Bottom Plates
Inch at two (2),
ENRGY-3, Polytherm H,
o
i
Prime, SECUROCK
Hot
SBS-AA,
BP -AA, SBS-
SBS-TA,
-60.0
plywood
(sanded -tap)
(square) with Roofgrlp 012
equally
equallyspaced,
H-Shield, H-Shield CG,
sp
al[
GYPsum-Fiber Roof
asphalt
AA, TA,
APP-TA
Staggered center
Multi -Max FA3
Board
APP-TA
APP-TA
APP-TA
rows
Dekfast Hex (aka, Dekfast
I
Polyglass G2
PLT-H-2-7/8) with Dekfast
9-Inch o.c. at min. 4-
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens
Min. 15/32-
Base,
g14, OMG 3" Round Metal
Inch lap and 9-Inch
Polytherm, ACFoam 11,
Deck, Dens Deck
(Optional)
SBS-AA,
W-33
Inch
Elastobase,
Plate with OMGHD,
four(4),
ENRGY-3, Polytherm H,
o
I
Prime, SECUROCK
Hot
SBS-A,
SBS-AA,
BP-AA,SBS-
SBS-TA,
-82.5
plywood
Elastobase P
Flat Bottom Plate (Accutrac)
equall
equallyspaced,
H-Shleld CG,
s
alt
Gypsum -Fiber Roof
asphalt
585-TA,
AA, SBS-TA,
APP-TA
(sanded -top)
with Roofgrlp R34 or Trufast
staggered center
Multi -Max
Multi-Maz FA3
i
Board
APP-TA
APP-TA
3" Metal Insulation Plate
rows
with Trufast HD.
4SeF-ADHERING BASE PpYI t �SS+'lWa./ •r��+i
., t.W4 t,i�$ i-.>i.i °''"?z
%a,Y4 .r°•,`Ya���bi'i >i;t x 'M`.k44uL vhla k,fv ki(i6i«;S,"^`)f
)S S
ty Sq
r�:F �tiSau'°t4J�vt±i 5RE
y
(1
Dekfast Hex (aka, Dekfast
Polyglass G2
PLT-H-2-7/8) with Dekfast
10-Inch o.c. at min.
(Optional)
MIn., Inch Dens
MIn.15/32-
Base,
A34, OMG 3" Round Metal
4-Inch la and 10-
p
Polytherm, ACFoam II,
ACFoam 11,
Den
Deck, Dens Deck
W-34
Inch
Elastobase,
Plate with OMG HD, OMG
Inch o.c. at three (3),
ENRGY-3Polytherm H , ,
of
r
Prime, SECUROCK
Hot
PolyRex SA
(Optional)
APP-TA
-52.5
plywood
Elastobase P
Flat Bottom Plate (Accutrac)
equallyspaced,
H-Shield, H-Shleld CG,
asRR
alt
Gypsum -Fiber Roof
asphalt
Base
APP-TA
(sanded -top).
with Roofgrlp 814 or Trufast
staggered center
Multi-Maz FA3.
�
I
Board
3" Metal Insulation Plate
rows
with Trufast HD.
I
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for F1.3654-11123 -
�7)
Certificate of Authorization #32455 6TH EDITION (201FBC NON-HVHZ EVA
UPTION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, ('
233-1330 Appendix 1, Page 10 of 65
ONEM01"etc.
System
Deck
- Anchpr Sheet, - ,, ., '
Base lnsalationt
`(,`"Top
lnsulatidn`.`p "tt" Roe}'Cover (Note 15)tT ",'MOP -
No.
(Note 1)
Type
Fasten
Attach
Type . :, 6
, ach
. , , , I 'Type Y, !
Attach c ';. Base PIY ^_ ' s Ply + _ .p
(A Cap Ply!
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens
Min. 19/32-
Elastobase,
OMG Flat Bottom Plates
4-Inch lap and 12-
Inch o.c. at two (2),
Polytherm, ACFoam ll,
I
Ho
Deck, Dens Deck
Hot
(Optional)
SBS-SA,
APP-SA,
W-35
Inch
P
(square) with Roofgrlp #12
equallyspaced,
ENRGY-3, Polytherm H,
sp alt
Prime, SECUROCK
asphalt
SBS-SA
-SA, 585-
SBS-TA,
-60.0
plywood
d-to
(sanded -top)
(sanded -top)
staggered center
H-Shield, H-Shield CG,
Gypsum -Fiber Roof
TA, APP TA
APP-TA
Multi -Max FA3
i
Board
rows
4
12-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Min. 0.25-inch Dens
MIn. 19/32-
Elastobase,
OMG Flat Bottom Plates
4-inch lap and 12-
Inch (2),
Polytherm, ACFoam II,
o
Deck, Dens Deck
Hot
PolyOez SA
(Optional)
W-36
Inch
Elastobase P
(square) with Roofgrlp#12
pat aced
equally
equallyspaced,
ENRGY-3, Polytherm H,
i I
sp
alt
Prime, SECUROCK
asphalt
Base
APP-TA
APP-TA
-60.0
plywood
(sanded -top)
staggered center
H-Shield, H-Shield CG,
Gypsum -Fiber Roof
Multi -Max FA3
Board
rows
Dekfast Hex (aka, Dekfast
Pol glass G2
PLT-H-2-7/8) with Dekfast
9-Inch o.c. at min.
(Optional) Min. 1.5-Inch
Min. 0.25-Inch Dens
Min. 15/32-
Base,
#14, OMG 3" Round Metal
Inch lap and 9-Inch
Polytherm, ACFoam II,
Deck, Dens Deck
W-37
inch
Elastobase,
Plate with HID,
o.c.atfour(4),
ENRGY-3, Polytherm H,
Ho
I.'
Prime, SECUROCK
Hot
PolyFlex SA
(Optional)
APP-TA
-82.5
plywood
Elastobase P
Plate
Flat Bottom Plate (Accutrac)
equallyspaced,
H-Shield, H-Shield CG,
sp
alt
Gypsum -Fiber Roof
asphalt
Base
APP-TA
(sanded -top)
with Roofgrlp #14 oPlate t
staggered center
Multi -Max FA3
Board
3" Metal Insulation Plate
rows
with Trufast HD.
i I
NEMO ETC, LLC iiEvaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization 432455 6m EDfrION (2017) FBC NON-HVHZ EV L TION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (5 233-1330 Appendix 1, Page 11 of 65
i
i
�
ONEMOletc.
TABLE 11): WOOD DECKS—
NEW CONSTRUCTION, REROOF
(TEAR -OFF) OR RECOVER
SYSTEM
TYPE B: MECHANICALLY ATTACHED:
. BONDED
. • INSULATION,BONDED
ROOF
System
Base Insulation Layer -
5 x� f
tlon'LaYer -'fir`
_^' �� •,'`%SRoof Cover,(Note 15) '*"'` '•MDP
Deck (Note 1)
No.
Type
Attach-
ryPeln,ul
3 r4ttach
base Ply,;
,my %UPPIY
-'IPn)�
ASPHALT -APPLIED ORTOROH-APPUED BASE PLY;`
Min. 3.5-Inch ENRGY
Dekfast Hex (aka, Dekfast PLT-H-2-
Min. 0.75-Inch Fes[O'BDdd
lip
(Optional if
(Optional if using AA
SBS-AA,
W-38
Min. 19/32-
3, H-Shield or
orTrufast
ithIns
Sper
(homogeneous) or
:
Not
using AA Ply)
Base) BP -AA, SBS-AA,
SBS-TA,
-60.0
Inch plywood
Polytherm
Metal lation Plat Trufast
Metal Insulation Plate with Trufast
1.33 ftT
High Densl
Dens
lberboS-Inch
fiberboard
�I
asphalt
BP -AA, SBS-AA
SBS-TA or APP-TA
APP-TA
DP
Roof Insulation
Roof Insulation
Min. 2-Inch Polytherm,
Dekfast #14 with Dekfast Hex (aka,
Min. 15/32-
ACFoam ll, ENRGY-3,
Dekfast PLT-H-2-7/8), OMG H14 HD
1 per 1
Min. 0.25-Inch Dens Del
Prime or
Hot
SBS-AA, SBS-
(Optional) S85-AA,
SBS-AA,
W-39
Inch plywood
EnergyGuard Polylso
with OMG 3" Galvalume Steel Plates
ftz
SECUROCK Gypsum FI
a Roof Board
asphalt
TA, APP-TA
SBS-TA, APP-TA
SBS-TA,
-75.0
Insulation, H-Shield or
or Trufast HD with Trufast 3-Inch
APP-TA
Multi -Max FA3
Insulation Plates
;i b
44 n
s h h;N;< l
wHti
ruffs
SE ADHERING BASEPLY:
tfa- i.} ,. Y. {:.� 1
u= .n
a'
,: J t
h5.�.a
iwt»Jtik.
r1 915 .A4$f,l%,F,
n�'L..h.
r
Min. 2-Inch Polytherm,
Dekfast H14 with Dekfast Hex (aka,
Min. 15/32-
ACFoam II, ENRGY-3,
Dekfast PLT-H-2-7/8), OMG #14 HD
1 per 1
Min. 0.25-Inch Dens D
c Prime or
Hot
Polyflex SA
W-40
Inch plywood
EnergyGuard PolViso
with OMG 3" Galvalume Steel Plates
ft'
SECUROCK Gypsum Fil
�e Roof Board
asphalt
Base
(Optional) APP-TA
APP-TA
-75.0
Insulation, H-Shield or
or Trufast HD with Trufast 3-Inch
Multi -Max FA3
Insulation Plates
TABLE 1E: WOOD DECKS—
6
TYPE C: MECHANICALLY
ATTACHEDSYSTEM INSULATION,BONDED
System
..
Topiniulation Layers S
;j-
otr
p r ' Roof Oove Note 15)'t 3t'_K"r (rMDP--:
No. Deck(Notes)
Base Insulation
7
+„-,, 'Fasten,
Attach;
! Basipl PI
i���
Type,
YP
.. ..
rS, r, S.
.CapPiy..
4e S45i yy bb .n 33
rta- °b4Y'•�'+�'. eir,}l,
fi ,e
d� lG � µ..,�> bPi°�-`iC
Ly q$ �Y4'S=- )Y�q�N.� xx4x ^,,1 v�.°. d."f P.+'+^. 3'f+f,T✓a'1 rx!v
�!lit'.t Rm..§Y, SYrulSni.
PASPHALT-APPDEDORTOREH-APFLIEDBASEPLY
;:.�;.
.., u:..., i`. i t �!. 4.�µ,.,
i ,(t. ilf a
'.
.+ r-Y
,f , ti,J aa.+R+�h
Dekfast Hex (aka, Dekfast PLT-H-
L; 81 with Dekfas t
MIn.15/
(Optional) One or more
Min. 0.25-Inch Dens Deck Prime or
#14, OMG 3" Round Metal Plate
I itt OMG HD,
f
1 2 ft
a
BP -AA, SBS-
AA, SBS-TA,
(Optlonal)!BP-
AA, SBS-AASBS-
SBS-AA, 585•
-30.0
W-41
oo
Inch plywood
layers, any combination,
SECUROCK Gypsum -Fiber Roof Board
OMG Fiat Bottom Plate (AEcutrac�
ith Roofgrip #14
lej
per
APP-TA
,
TA, APP TA
TA, APP-TA
loose laid
or Trufast 3" Metal Insulation Fla
ith Trufast HD.
(Optional) One or more
Dekfast #14 with Dekfast Hex (ak
�,
ekfast PLT-H-2-
(Optional) SBS-
W-42
Min 15/32-
layers, any combination,
Min. 0.25-Inch Dens Deck Prime or
7/8), OMG 014 HD with OMG 3"
I
alue Steel
m
1 per 1.78
SBS-AA, 5B5-
SBS-TA, APP-
SBS-AA, SBS-
-45.0
inch plywood
SECUROCK Gypsum -Fiber Roof Board
Plates orTrufast HD with Trufast
ch Insulation
ftz
TA, APP-TA
A,
TA APPTA
lease laid
Plates
i'
Dekfast 914 with Dekfast Hex (a
�,
ekfast PLT-H-2-
(Optional) SBS-
(O
Min. 15/32-
(Optional) One or more
Min. 0.25-Inch Dens Deck Prime or
7/8), OMG 014 HD with OMG 3"
al
'-f
lame Steel
1perlft'
SBS-AA, SBS-
SBS-TA,
SBS-AA, SBS-
750
W�3
Inch plywood
layers, any combination,
Gypsum -Fiber Roof Board
Plates or Trufast HD with Trufast
chlnsulatlon
TA, APP-TA
TA
TA,APP-TA
looselaidSECUROCK
Plates
NEMO ETC, LLC
�I
ti
Evaluation Report P9290,02.08-R21 for FL1654-R23
Certificate of Authorization
#32455
GTH EDITION
(2017) FBC NON-HVHZ EVAI
U
TION
Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166
Polyglass Modified Bitumen Roof Systems; (9
i
I'
233-1330
i
Appendix 1, Page 12 of 65
it
I
�I
f
J ONEMOjeitc.
TABLE IE: WOOD DECKS— NEW CONSTRUCTION, REROOF
(TEAR -OFF) OR RECOVER
SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,
BONDED ROOF COVER
System ' Top Insulattad,Layer'', '. • ,
?"1.1 ;° r_, L r a=""`• Roof Cover(Nate SS) -
Deck (Note 1Base Insulation Layer
No. ()
Type Fasten .:
`i
Attach'
r. Base Ply,
cap Ply (Psf)
Min.0.5-Inch Structodek High Density
O
(Optional) One or more Fiberboard Roof Insulation or min.
i
(Optional if
(Optional if using
Min. 19/32-
layers, any combination, 0.25-Inch Dens Deck, Dens Deck Prime
Dekfast Hex (aka, Dekfast PLT-H-
- /8) with Dekfast
I'
1 per 1.33
using AA Ply)
AA Base) BP -AA,
SBS-AA, SBS-
-82.5
Inch plywood
loose laid or SECUROCK Gypsum -Fiber Roof
#12 DP
ft2
BP -AA, SBS-
SBS-AA, SBS-TA
TA, APP-TA
Board
it
AA
orS-AA,S
SELF -ADHERING BmiPLY:
w* .F{ ✓l��i.r t 4a ��;
�WS,
Min. 15/32-
(Optional) One or more
Min.1.5-Inch Polytherm, ACFoam 11,
Dekfast#14 with Dekfast Hex (al
7/8), OMG #14 HD with OMG 3'
a; ekfast PLT-H-2-
a valume Steel
1 per 2.67
(Optional) SBS-
SBS-SA, APP-
W-05
Inch plywood
layers, anycombination,
H-Shield or Polytherm
Plates or Trufast HD with Trufast
I nch Insulation
k2
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-30.0
loose laid
Plates
i i
TA
APP-7A
(Optional) One or more
Dekfast #14 with Dekfast Hex (a
of)ekfast PLT-H-2-
i
Min. 15/32-
MIn.1.5-Inch Polytherm, ACFoam II,
7/8), OMG 014 HD with OMG 3"
Ga valume Steel
1 per 2.67
Polyflex SA
(Optional) APP-
W-06
Inch plywood
layers, any combination,
H-Shield or Polytherm
Plates orTrufast HD with Trufast3(
nch insulation
ft2
Base
TA
APP-TA
-30.0
loose laid
Plates
j
(Optional) One or more
Dekfast Hex (aka; Dekfast PLT-H-
- /8) with Dekfast
II
(Optional)SBS-SBS-SA,
APP-
W-07
Min15/32-
.
layers, any combination,
Min. 0.25-inch Dens Deck Prime ar
#14, OMG 3" Round Metal Plate
h OMG HD,
1per 2 ft2
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-30.0
Inch plywood
loose laid
SECUROCK Gypsum -Finer Roof Board
OMG Fla[ Bottom Plate (Accutra
or Trufast 3" Metal Insulation Piz
) with Roofgrip 414
to with Trufast HD.
TA
APP-TA
(Optional) One or more
Dekfast Hex (aka, Dekfast PLT-H-
/8) with Dekfast
W-48
Min.
layers, any combination,
Min. 0.25-Inch Dens Deck Prime or
#14, OMG 3" Round Metal PlatelI'hOMG
HD,
1per 2 ft2
Polyflex SA
(Optional)APP-
APPTA
-30.0
Inch plywood
plywood
loose laid
SECUROCK Gypsum -Fiber Roof Board
OMG Flat Bottom Plate (Accutra
ith Roofgrip 914
Base
TA
or Trufast 3" Metal Insulation PI
a with Trufast HD.
Polygrlp 014 with Polygrlp Hex P
ase or Dekfast #14
(Optional for recover)
with Dekfast Hex (aka, Dekfast P
P .2-7/8) or
r r
Mch
One or more layers, any
Min. 0.25-Inch SECUROCK Gypsum-
Dekfas[Galvalume Steel 3"Rou
d ka, Dekfast PLT-
W-49
Inch plywood
plywood
combination, min. 1-
Fiber Roof Board optionally
p yprimed
with POLYBRITE 745
R-3)orOMG #14 Roofgrip with
Metal Plate, OMG 3In. Ribbed G
M 3In. Round
Plate
1per2ft 2
SBS-SA
None
SBS-SA
-05.0
Inch, loose laid
Ily3lume
(Flat) or Flat Bottom Pl
eor Trufast #14
HD Fasteners with Tmfast 3" Me
°al Insulation Plate
Polygrip 014 with Polygrip Hex P
at or Dekfast #14
(Optional for recover)
with Dekfast Hex (aka, Dekfast P
T--2-7/8) or OMG
W-50
Min. 15/32-
One or more layers, any
Min. 0.25-Inch Dens Deck Prime
#14 Roofgrip with OMG 3In. Ron
a
Metal Plate or
1 per 2 ft 2
SBS-SA
None
SBS-SA
-05.0
Inch plywood
combination, min. 1-
optionally primed with POLYBRITE 745
Accutrac Flat Bottom Plate orTryf�
#14 HD
Inch, loose laid
Fasteners with Trufast 3" Metal fn{
latlon Plate
Polygrip #14 with Polygrip Hex P
a� or Dekfast DF-
(Optional for recover)
Min. 0.25-Inch SECUROCK Gypsum-
#14 with Dekfast Hex (aka, Dekf
ti
s LT-H-2-7/8) or
(Optional when
SBS-SA, APP-
W-51
MIn.15/32-
One or more layers, any
Fiber Roof Board optionally primed
OMG #14 Roofgrip with OMG 31
I..
. ound Metal I
Sper 1.78
SBS-SA -
using torch -
SA, SBS-TA or
-05.0
Inch plywood
combination, min. 1-
with POLYBRITE 745
Plate or Accutrac Flat Bottom Pl
t`e rTrufast#14
applied Cap Ply)
APP-TA
Inch, loose laid
HD Fasteners with Trufast 3" Meal
Insulation Plate
SBS-TA, APP-TA
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 6TM EDITION (2D17) F8C NON-HVH2 EVAiLiLUPPPTION
Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, Cyril
233-1330 Appendix 1, Page 13 of 65
4
14
I
(
ONEMOjetc.
IE: WOOD DECKS
-NEW CONSTRUCTION, REROOF(TEAR-OFF)
OR
RECOVER
SYSTEM TYPE C: MECHANICALLY
ATTACHEDTABLE
INSULATION,
BONDED ROOF
System.
`t. "r ,.rr a
,To Iniulatlon�l$Yer t'4Y
A'i sr r� -: T�
g "=3`
s t W}. " Roof,fb`Ye r�Note 131�`y'st r'M"i'Kt °'MD�=>
Deck (Note 1)
No.
Base Insulation Layer
Type
F - .c ,,:.Fasten
: 11,E zl,�.��,
Attach
i .,;&PPIy
r".ipsf)-
(Optional for recover)
OMG 814 Roofgrip with OMG 3 i .�li
and Metal
(Optional when
-
SBS-SA, APP-
-
MIn. 15/32-
One or more layers, any
MIn.0.25-Inch Dens Deck Prime
Plate or Trufast 8141 HD Fasteners wi
h Trufast 3"
1 per 1.78
SBS-SA
using torch-
SA, SBS-TA or
-45.0
Inch plywood
combination, min. 1-
optionally primed with POLYBRITE 745
Metal Insulation Plate
ftz
applied Cap Ply)
APP TA
Inch, loose laid
SBS-TA, APP-TA
Dekfast 014 with Dekfast Hex (a
ekfast PLT-H-2-
Min. 15/32-
(Optional) One or more
Min. 0.25-Inch Dens Deck Prime or
7/8), OMG 814 HD with OMG 3"
i
a
alume Steel
1 per 1.78
PolyFlez SA
(Optional) PP-
W-53
inch plywood
layers, any combination,
SECUROCK Gypsum -Fiber Roof Board
Plates or Trufast HD with Trufast
ch Insulation
f12
Base
TA i
APP-TA
-45.0
loose laid
Plates
41
Dekfast 814 with Dekfast Hex (ak ;
ekfast PIT-H-2-
Min
(Optional)Oneormore
Min. 0.25-Inch Dens Deck Prime,
7/8), OMG 814 HD with OMG 3" aI
lame Steel
r
(Optional) SBS-
SBS-TA, APP-TA
W-54
Inch plywood
chp1V oo
layers, any combination,
DEXcell FA Glass Mat Roof Board or
Plates or Trufast HD with Trufast:f;
ch Insulation
1 per 1 ft
SBS-SA
TA, APP TA
-60.0
loose laid
SECUROCK Gypsum -Fiber Roof Board
Plates
Min. 1.5-Inch ACFoam II, ACFoam III,
Min. 19/32-
(Optional) One or more
EnergyGuard Polyiso Insulation,
Trufast Versa Fasteners (min. %
E
enetratlon) &
(Optional) SBS-
SBS-SA, APP-
Inch APA
layers, any combination,
ENRGY 3, ENRGY 3 CGF, H-Shield, H-
Plates; 2 screws per plate Instal
180° Into the
1 per 1.33
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-67.5•
W-55
rated OSB
loose laid
Shield CG, 15095+GL, Multi -Max FA3,
f
holes of the plate*
ft'
TA
APP-TA
Polytherm or Ultra -Max optionally
I
primed with POLYBRITE 745
1j
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield minim
1801bf. Additional Verso -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
3.5-inch ACFoam II, ACFoam III,
Dekfast Hex (aka, Dekfast PLT-H- �Z
8) or Dekfast
(Optional) One or more
Min
rd Polyiso Insulation,
Galvalume Steel 3" Round Insular or
(
Plate (aka,
(Optional) SBS-
SBS-SA, APP-
W-56
Mln. 19/32-
layers, any combination,
ENRGY 3, ENRGY 3 CGF, H-Shield, H-
Dekfast PLT-R-3) with Dekfast d1
MG 31n.
1 per 1.33
SBS-SA
SA, SBS-TA, APP•
SA, SBS-TA,
-67.5
Inch plywood
loose laid
Shield CG, ISO 95+GL, Multi -Max FA3,
Galvalume Plate (non -ribbed) or
AccuTrac
3I
ft2
TA
APP TA
Polytherm or Ultra -Max optionally
Plate with 812 Roofgrip or Trufas
Metal
primed with POLYBRITE 745
Insulation Plate with Trufast DP
NEMO ETC, LLC
f1f
I,
III
l
I
Evaluation Report P9290.02.08-R21 for FL3654-R23
Certificate of Authorization
N32455
Gm EDITION (2017) FBC NON-HVHZ E VALEUll
TION
Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166
Polyglass Modified Bitumen Roof Systems; (9
54 233-1330
it
Appendix 1, Page 14 of 65
-
ONEM01eitc.
TABLE IF: WOOD .REROOF
(TEAR -OFF) OR RECOVER
SYSTEM TYPE D: INSULATED, MECHANICALLY ATTACHED BASE
SHEET, BONDED ROOF COVER
System 'Base Sheetr
_..
Attach
!
S'�ry Y1 rki Veit y`p'1•f+; § LQ�t ,� a,x�-';H6ot Cover (Not✓; 15)r'� iiwMOp
9 z
No.
Deck (Note 1)
TYPelatlan.Lay
TYP e • . Fasten
..i:-
i. i , Attach,"n .. _. ° . ..Base Ply 1 P PI>V `}'
"ASPHALT-APVaEa`ORTORCN-APPL}Ea BASF PLY:",.. 1 `i,e-' I �1 u-i5 nr3�+ itR ,, `'°t'(NFij{{,,��,,
ld u.. si. , Rt h.�;.aara.rh .. t" 4 s "i
<.
-x
n� pn.�iu�Utx 1"1.#Nd�Stf�/+k9: f1rrt�,F Pi�i'd?�lnst rv: `dV�tP'rs'Ct 'ti.±.l+it1NT :^dti4`!
Elastobase, Elastobase
i
P, Polyglass G2 Base,
OMG Flat Bottom Plates (square) with
o fgrip 014,
Min. 19/32-Inch
One or more
Prelim.
CertalnTeed Glasbase,
Dekfast Hex (aka, Dekfast
,
i h Dekfast
12-Inch o.c. at min. 4-inch lap and
(Optional) BP -AA,
SBS-AA, SBS-
W-57
plywood
layers, any
Attached
Firestone MB Base, JM
or Trufast 3" Metal Insulation Plate
Motion Plat
� i
wl h Trufast
12-Inch o.c. at two (2), equally
SBS-AA, SBS-TA or
TA, APP-TA
-52.5
combination
Perma-Ply 28, Tamko
H1D4
spaced, staggered center rows
APP-TA
Glass Base or GAFGLAS
075
Min. 19/32-inch
One or more
Prelim.
Elastobase or
12-Inch o.c. at min. 4-inch lap and
(Optional) BP -AA,
SBS-AA, SBS-
W-58
plywood
layers, any
Attached
Elastobase P
OMG Flat Bottom Plates (square) with
o fgrip a12
12-Inch O.C.at two (2), equally
SBS-AA, SBS-TA or
TA, APP-TA
-60.0
combination
f
spaced, staggered center rows
APP-TA
Mln. 19/32-Inch
One or more
Trufast Versa Fasteners (min.'/." pen
-t� tion) &
12-Inch o.c, at min. 4-Inch lap and
ISBS-SA, APP-
APA rated OSB
layers, any
Loose -laid
Elastobase, Elastobase P
Plates; 2 screws per plate installed 1
0° into the
12-inch o.c. at two (2), equally
BP -AA, SBS-AA,
SA, SBS-AA,
-67.5
yy_Sg
or plywood
combination
holes of the plate, parallel to the wid
I� direction
spaced, staggered center rows
SBS-TA, APP-TA
SBS-TA, APP-
of the sheet-
TA
Note:
`For re-roofor recover construction, field withdrawal resistance testing (Note 11) shall yield mfn
rum 199 lbf. Additional Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
i
Trufast Versa Fasteners (min. W pen
;it Lion) &
Min. 19/32-inch
One or more
Plates; 2 screws per plate installed 10
Into the
12-Inch o.c. at min.4-Inch lap and
APA rated O5B
layers, an
y y
Loose -laid
Polyglass APP Base
y
holes of the plate, parallel to the wid1
direction
12-Inch a.c. at two (2), equally
APP-TA
APP-TA
W-60
or plywood
combination
spaced, staggered center rows
of the sheet'
1� i
Note:
'For re-roofor recover construction, field withdrawal resistance testing (Note 11) shall yield mjn(�um
199 Ibf. Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
p
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
h Dekfast
Min. SS/32-Inch
One or more
Prelim.
Polyglass Base,
OMG Round Metal Plate with 0
r,
10-Inch o.c. at min. 4-Inch lap and
(Optional) BP -AA,
SBS-AA, SBS-
W-61
plywood
layers, any
Attached
Elastobase, Elastobase P
e,
o
OMG Flat Bottom Plate (Accutrac) with
OM
f
N¢ fgrip
10-Inch o.c. at three (3), equally
SBS-AA, SBS-TA or
TA, APP-TA
-75.0
combination
or Trufast 3"Metal Insulation Plate with;T
H#14D.
fast HD.
spaced, staggered center rows
APP-TA
One more
Prelim.
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
it14, OMG 3" Round Metal Plate 0
, h,Dekfast
HD,
10-Inch o.c. at min. 4-Inch lap and
W-62
Min. 15/32-Inch
plywood
layers, any
s,
Attached
Polyglass APP Base
with
OMG Flat Bottom Plate (Accutrac) with
,
1 oofgrip g14
10-Inch o.c. at three (3), equally
(Optional) APP-TA
APP-TA
-75.0
combination
or Trufast 3" Metal Insulation Plate wit
T ufast HD.
spaced, staggered center rows
Trufast Versa Fasteners (min.'A" pen
t ation) &
SBS-SA, APP-
Min. 15/32-Inch
APA rated OSB
One or more
layers, any
Loose -laid
Elastobase, Elastobase P
Plates; 2 screws per plate installed l
0 intothe
9-inch o.c at min. 2-Inch lap and
12-Irish o.c. at two (2), equally
BP -AA, SBS-AA,
SA, SBS-AA,
-90.0
W-63
or plywood
combination
holes ofthe plate, parallel to the wi
direction
spaced, staggered center rows
SBS-TA, APP-TA
SBS•TA, APP-
of the sheet* -
G
TA
Note:
•Forre-roofor recover construction,field withdrawal resistance testing (Note 11) shall yield rmavurn
159 lbf. Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
NEMO ETC, LLCM
Evaluation Report P9290.02.08-R21 for FL3654-R23
Certificate of Authorization 032455 6m EDITION (2017) FBC NON-HVHZ EV
L ATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems;(
SLp) 233.1330 Appendix 1, Page 15 of 65
'l
I
4 I Nemo etc.
TABLE IF: WOOD .
SYSTEM TYPED: INSULATED, MECHANICALLY ATTACHED BASE
SHEET, BONDED ROOF COVER
- Layer(s). .'I,i i
System
er (NoYexi6) td=e Ii,If�loP
sry gr.t t.t.
No.
peck Note 1)
(
TyPulatlon
a
Attach
!Typ e
+ Tl�n,,r Fastehesheetytlza`-
I
-�
r H ;
-r 4, ,,� ��Attadh,. Base PlyV , tCeP PIYI
Trufast Versa Fasteners (min. Y." pen
'r tic &
Mtn. IS/32-Inch
One or more
Plates; 2 screws per plate Installed 18
° nto the
9-IncH o.c. at min. 2-Inch lap and
12-Inch o.c. at two (2), equally
APP-TA
APP-TA
-90.0
APA rated OSB
layers, any
Loose -laid
Polyglass APP Base
holes of the plate, parallel to the widt
1 irection
W-64
or I ood
plywood
wmbination
of the sheet-
A
spacei tl, staggered center rows
Note:
-For re -roof or recover construction, field Withdrawal resistance testing (Note 11) shall yield ml
Yinum 15916f• Additional Versa -Fast fasteners within each Versa -Fast Plate may be utilize d to
produce minimum withdrawal resistanceI
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
it Dekfast
9-Inch o.c. at min. 4-Inch lap and 9-
!
(Optional) BP -AA,
W-65
Min. 15/32-inch
One or more
layers, any
Prelim.
Polyglasse, Base,
OMG Round Metal Plate with 0
G HD,
l
1
Inch o.c. at four (4), equally spaced,
SBS-AA, SBS-TA or
SBS-AA, SBS-
-90.0
plywood
combination
Attached
Elartabase, Elastobase P
OMG Flat Bottom Plate (Accutrac) with
OM o
or Trufast 3" Metal Insulation Plate with
o fgrip #14
7� fast HD.
staggered center rows
APP-TA
TA, APP-TA
Dekfast Hex (aka, Dekfast PLY-H-2-7/8)
� Dekfast
9-Inch o.c. at min lap and 9-
W-66
Min. 15/32-Inch
One or more
layers, any
Prelim.
Polyglass APP Base
OMG Round Metal Plate with D
I G HD,
i
b fgrip
.4-Inch
inch o.c. at four (4), equally spaced,
(Optional) APP-TA
APP-TA
-90.0
plywood
combination
Attached
o
OMG Plate (Accutrac) with
OMG Flat Bo
or Trufast 3' Metal Insulation Plate with
7r HD. fast HD.
staggired center rows
Min.15/32-Inch
One or more
Prelim.
Trufast#12 DP orTrufast#14 HD wit hT
I !
f st 3"
6-Inch o.c. at min. 4-Inch lap and 6-
Inch O.C. at three (3), equally
(Optional)BP-AA
SBS-AA
-90.0
W-67
plywood
layers, any
combination
Attached
Elastobase, Elastobase P
Metal Insulation Plates
E
`
spaced, staggered center rows
or SBS-AA
One or more
OMG #12 Standard Roofgrlp or OMG #1
Fi avy
I' I
6-Inch o.c at min. flinch lap and 6-
(Optional) BP -AA,
SBS-AA SBS-
W-68
Min. 15/32-Inch
layers, any
Prelim.
Elastobase, Elastobase P
Duty with OMG 3" Round Metal Plates o
MG Flat
Inch o.c. at three (3), equally
5B5-AA, 505-TA,
,
TAor APP-TA
-90.0
plywood
combination
Attached
Bottom Metal Plates
spaced, staggered center rows
APP-TA
One or more
OMG #125tandard Rootgrip or OMG #1
�N avy
6-inch o.c at min. 4-Inch lap and 6-
W-69
MIn.15/32-Inch
layers, any
Prelim.
Polyglass APP Base
Outywith OMG 3" Round Metal Plates a
MG Flat
Inch o.c. at three (3), equally
(Optional) APP-TA
APP-TA
-90.0
plywood
combination
Attached
Bottom Metal Plates
`�
'paced, staggered center rows
Min.15/32-Inch
One or more
Trufast Versa Fasteners (min. Y°" pen
Plates; 2 screws per plate Installed 18
j tion) &
nto the
6-Incho.c.atmin.4inchlap and 6-
BP -AA, SBS-AA,
SBS-SA, APP-
SA, SBS-AA,
-105.0
APA rated OSB
layers, any
Loose-lald
Elastobase, Elastobase P
holes of the plate, parallel to the widt
- Irection
Inch o.c. at three (3), equally
spaced, staggered center rows
SBS-TA, APP-TA
'
SBS-TA, APP-
or or plywood
combination
of the sheet•
TA
Note:
*For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield ml
`lum 103 lbf. Additional Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
! I
Min.15/32-Inch
One or more
Trufast Versa Fasteners (min.'/."pen
installed 16"
t Lion) &
The
6-Inch o.c. at min. 4-Inch la and 6-
P
APA rated OSB
layers, any
Loose -laid
Polyglass APP Base
Plates; 2 screws per plate
holes of the plate, parallel to the widt
nto
i
irection
Inch o.c. at three (3), equally
tl
APP-TA
APP-TA
-105.0
W-71
or plywood
I
P W+
combination
of the sheet•
i-
space, staggered center rows
Note:
-For re -roof or recover construction, field withdrawal resistanre testing (Note 11) shall yield ml
'i� um 103 lbf. Additional Versa -Fast Fasteners within each Verso -Fast Plate may be utilized to
produce minimum withdrawal resistance
1 I I
Min.15/32-Inch
One or more
Prelim.
Trufast 412 DP orTrufast HD withT
f I
f st3"
6-Inoli o.c. at min. flinch lap and 6-
I
Inch o.c. at five (5), equally spaced,
(Optional)BP-AA
SBS-AA
-120.0
W-72
plywood
layers, any
Attached
Elastobase, Elastohase P
Metal Insulation Plates
F
or SB5-AA
combination
staggered center rows
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-NVHZ EVA Ui TION nevu,nri c.:..e 16 w.o
Prepared by: Robert Nieminen, PE-59366 Polyglass Modified Bitumen Roof Systems; (9 4 233.1330 Appendix 1, Page 16 of 65
I�
I -
l
I
I
I
_
ONEM01-letc.
... sCONSTRUCTION,..
l
ATTACHEDSYSTEM TYPED: INSULATED, MECHANICALLY BASE
SHEET, BONDED ROOF COVER
System
'Insulationlayer(s)
''• r_� "• .. ' BasgSheet
iil'f ' '�,"„ rs t��"v, v ,i �t$yr
' 1Roof Wver (Noie lSlr P,'1
No.
Deck (Note 11
Type
Attach
Type _ -
- - _ - Fasten;
,,,..!
•_„ ` '+ `Attach , ... _. i`_ ,
Base PIY
Wp Ply _`
; (P i
Min. 15(32-Inch
One or more
Prelim.
OMG 012 Standard Roofgrlp or OMG If
�l Heavy
6-Inc o.c. at min. 4-Inch lap and 6-
(Optional) BP -AA,
SBS-AA,SBS-
W-73
layers, any
Attached
Elastobase, Elastobase P
Duty with OMG 3" Round Metal Plates
r MG Flat
Inch o.c. at five (5), equallyspaced,
SBS-AA, SBS-TA,
TA
-120.0
plywood
combination
Bottom Metal Plates
I
staggered center rows
APP.TA
or APP-TA
One or more
OMG h12 Standard Roofgrlp or OMG h
41Heavy
6-Inch D.C. at min. 4-Inch lap and 6-
W 74
MIn.15/32-Inch
layers, any
Prelim.
Polyglass APP Base
Duty with OMG 3" Round Metal Plates
11
MG Flat
Inch stag at five (5), equally spaced,
(Optional) APP-TA
APP-TA
-120.0
plywood
combination
Attached
Bottom Metal Plates
�r
staggered center rows
SELF -ADHERING BASE PLY::
, -
,3�•.
.. -..- .. r 'h-- ,i;.. i,u`..'. n'(..tif}u:b
yy'� d
f...:uL"Ysr 4a'F�..1L Gt�..iti`:'m��.�3x:>.r..,:+i iu ew ti�i..il:3�F3,�3ia✓','s..+,:..
'rba4
Min. 19/32-Inch
One or more
Prelim.
Elastobase, Elastobase P
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
I h Dekfast
12-Idch o.c. at min. 4-Inch lap and
SBS-SA, APP-
W-75
layers, any
Attached
(poly -film top)
h14or Trufast3" Metal Insulation Plate
W hTrufast
12-inch o.c. at two, equally spaced,
SBS-SA
SA, SBS-TA or
-52.5•
plywood
combination
HD
I
staggered center rows
APP-TA
One or more
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
"1 h Dekfast
12-Inch o.c. at min. 4-Inch lap and
W-76
Min. 19/32-inch
layers, any
Prelim.
Elastobase, Elastobase P
a14 or Trufast 3"Metal Insulation Plat
`w hTrufast
i
equally spaced,
Polyfiex SA Base
APP-TA
-Sets•
plywood
combination
Attached
(poly -film top)
HD
�
staggered
staggered center rows
W-77
Min.19/32-Inch
One or more
layers,
Prelim.
Elastobase, Elastobase P
OMG Flat Bottom Plates (square)
!
fgrip g12
12-I11ch o.c. at min. 4-Inch lap and
i
12-Inch two,
SBS-SA
SBS-SA, APP-
SA, SBS-TA
plywood
any
Attached
(poly -film top)
with
o
o.c. at equally spaced,
or
-60.0•
combination
II
staggered center rows
APP-TA
W 78
Min. 19/32-inch
One or more
layers an
y
Prelim.
Elastobase, Elastobase P
OMG Flat Bottom Plates s uare with
(q 1
o f ri 812
0 p
12-Inch o.c. at min. 4-Inch lap and
12-i ch o.c. at two, equally spaced,
9 q y p
Pol ex SA Base
APP-TA
-60.0•
plywood
i
combination
Attached
(poly -film top)
staggered center rows
Trufast Versa Fasteners (min. %" pen
et ation) &
Min. 19/32-Inch
APA OSB
One or more
layers,
Loose
Elastobase, Elastobase P
Plates; 2 screws per plate Installed 110
Into the
i I
12-Inch stag at min. 4-inch lap and
12-Inch two (2),
SBS-SA
SBS-SA, APP-
SA, SBS-TA,
rated
or plywood
any
combination
-laid
(poly -film top)
holes of the plate, parallel [o the wid
h direction
o.c. at equally
spared, staggered center rows
APP-TA
-67.5
yy_7g
of the sheet•
ICI
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield inlni
um 199 Ibf, Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
I
1
Trufast Versa Fasteners (mini/." pen'f
anon) &
i
12-Inch 4-Inch lap
Min. 19/32-Inch
APA rated O5B
One or more
layers, any
Loose -laid
Elastobase, Elastobase P
Plates; 2 Screws per plate installed 1!}0
into the
o.c. at min. and
stag at two cent equally
Polyfiez SA Base
APP-TA
(poly -film top)
holes of the plate, parallel to the wid
direction
W-80
or plywood
combination
of the sheet-
��
spaced, staggered center rows
spadd
Note:
-For re-roofor recover construction, field withdrawal resistance testing (Note 11) shall yield a
lint um 1991bf• Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
6
NEMO ETC, LLC
i
I'
�I
I
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization N32455
6rx EDITION (2017) FBC NON-HVH2 EV
L ATION
Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166
Polyglass Modified Bitumen Roof Systems; (
5 ) 233-1330
�I
Appendix 1, Page 17 of 65
i
l i
I
�i
ONEMOjetc.
TABLE IG: WOOD .
.. R.
SYSTEM TYPE E: NON -INSULATED, MECHANICALLY ATTACHED BASE
SHEET (NAILS), BONDED ROOF COVER
n,
Systemmr-Base Sheet,;
f
No. Deck (Note 1)
TYP a Fasten
li,-yfy... ;:;.Attach 1 ;'
BasePI3':•^: i, ": .� "[dpPIY
_- 'xt "1j:,, xc .: x�,,.>rdr rm��, -V.Yk�,
°Xt-
x�t�."'.iktA
'"t,1
W+�Mi
rNd Bnsit PLy:.f ,i. iif.,h . nt,tt. x-vx«F�,S u. 7i fr;�Y:i ji
i 'f,1't +",'`r,"(� +.����L��,,en
., a)'•prM'a.�"=.?nh't!k'..1 +'y�"�.Ft r'"yv
Min. 15/32-
9-Inch
of . at min. 2-Inch lar and I8-Inch o.c at
SBS-AA, SBS-TA, APP-
W-81
Inch plywood
Elastobase, Elastobase P
Simplex MAXX Cap
two (2,,
qually spaced, staggered center rows
None
TA
-05.0-
Min. 15/32-
32 ga., 1-5/8-Inch diameter tin caps with 12 ga. annular
6-Inch
o .'at min. 3-Inch lap and 6-Inch o.c. at
SBS-AA, SBS-TA, APP-
W82
Elastobase, Elastobase P
ring shank nails
four I[
qually spaced, staggered center rows
None
TA
-45.0
rated OSB
W-83
Min. 15/32-
APA,
Elastobaseh Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 12 ga. annular
6-Inch
four(
o . at min. 3-Inch lap and 6-Inch o.c. at
I,
None
SBS-SA, APP-SA
-05.0
rated OSB
top)
ring shank nails
qually spaced, staggered center rows
W 84
Min. 15/32-
Inch APA
Polyglass APP Base
32ga., 1-5/8-Inch diameter tin caps with 12 ga. annular
ring shank nails
6-Inch
in
of . at min. 3-Inch lap l and 6-Inch o.c. at
qually spaced, staggered center rows
None
APP-TA
-0S.D
rated OSB
f,l
Min. 15/32-
9-Inch
9 .'a[ min. 2-Inch laps and 12-inch o.c. at
SBS-AA, SBS-TA, APP-
W-85
Inch plywood
Elastobase, Elastobase P
Simplex MAXX Cap
two (2;,
qually spaced, staggered center rows
None
TA
-52.5
Min. 15/32-
Original Simplex Cap Nails (1-Inch metal head diameter,
6-Inch
o
. at min. 3-Inch lap and 6-inch o.c at
None
SBS-AA, SBS-TA, APP-
_52.5
W 86
Inch plywood
Elastobase, Elastobase P
11 gougexmin. 1.15-inch long annular groovedshank)
four(
),
qually spaced, staggered center rows
TA
W 87
Min. 15/32-
Elastobase, Elastobase P (poly -film
Original Simplex Cap Nails (1-Inch metal head diameter,
64nch
of
. at min. 3-Inch la , and 6-Inch o.c. at
None
SBS-SA, APP-SA
-52.5
Inch plywood
top)
31 gouge x min. 1.25-inch long annulargmovedshonk)
four (I
f,l
qually spared, staggered center rows
Min. 15/32-
Original Simplex Cap Nails (1-Inch metal head diameter,
6-Inch
PI
. at in. 3-Inch laps and 6-Inch o.c. at
None
APP-TA
-52.5
W 88
Inch plywood
Polyglass APP Base
11 gauge x min. 1.25-Inch long annular grooved shank)
fourO,I
qually spaced, Staggered center rows
Elastobase, Elastobase P, Polyglass
o
min. 19/32-
G2 Base, CertalnTeed Glasbase,
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
8-Inch
three
3`)
. at min. 4-Inch la and 8-Inch o.c. at
equally spaced, st center
None
SBS-AA, SBS-TA, APP-
-60.0
W-89
inch plywood
Firestone MB Base, JM Perma-Ply
ring shank nails
ggered
TA
28 Tamko Glass Base or GAFGLAS
rows
I
#75
li
I
8-Inch
o
. at min. 4-Inch lap and 8-Inch o.c. at
Min. 19/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
three
3{
equally spaced, staggered center
None
SBS-SA, APP-SA
-60.0
W-90
inch plywood
top)
ring shank nails
rows
Min. 15/32-
Polyglass G2 Base, Elastobase,
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
8-Inch
o
. at min. 4-Inch lap and 8-Inch o.c. at
None
SBS-AA, SBS-TJAInch
W-91
plywood
Elastobase P
ring shank nails
four (
),
qually spaced, staggered center rows
TA
Min. 15/32-
Polyglass APP Base
32 ga., 1-5/8-Inch diametertin caps with 11 ga. annular
8-inch
, at min. 4-Inch lap and 8-Inch o.c. a[W-92
,None
APP-TAInch
plywood
ring shank nails
four (
qually spaced, staggered center rows
1G-inc
.c. at min. 4-Inch lap and 1G4nch o.c.
Polyglass G2 Base, Elastobase,
Simplez MAXX Cap
at thr
) equally spaced,istaggered center
None
SBS-AA, SBS-TW93Min.1Y/32-
I wood
Elastobase.ProwsMin.
TAInch
10-Inc
.c. at min.4-Inch la nd 10-Inch o.c.
W-94Inch
15/32-
Polyglass APP Base
Sim lea MAXX Ca
P P
at thr
), equally spaced, sta ered center
gg
None
APP-TA
plywood
rows
NEMO ETC, LLC
Evaluation Report P9290.02.08-1121 for FL1654-1123
Certificate of Authorization #32455 6" EDITION (2017) FBC NON-HVHZ EVAL
U
TION Revision 21; 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954
233-1330 Appendix 1, Page 18 of 65
ONEM01'eitc.
TABLE IG: ... r CONSTRUCTION
OR REROOF (TEAR -OFF)
SYSTEM TYPE E: NON -INSULATED, MECHANICALLY ATTACHED BASE
SHEET (NAILS), BONDED ROOF COVER
3)
Roa} [fiver Nate 15
it ( 1(Note
Type
Fasten
�, ` Attac i'
Base Ply ' CaPPIy
T (p"5/32-
Polyglass G2 Base, Elastobase,
Sim lex MAXX Ca
p p
9-Inc
+ •at min. 4-Inch lap and 9-Inch o.c. at
None
SBS-AA, SBS-TA, APP-
TInchplywood
lywood
Elastobase P
four ()
quallyspaced, staggered center rows
7q
-90.0
5/32-
lywood
Polyglass APP Base
Simplex MAXX Cap
9-Inc
fur()
to . at min. 4-Inch lap and 9-Inch o.c. at
quallyspaced, staggered center rowsNone
APP-TA
-90.0
5/32-
1
Elastobase, Elastabase P
SimplexMAXXCap.
6-Inc
ppo . at min. 2-Inch la and 6-Inch o.c at
VI Q
None
5B5-AA, SBS-TA, APP-
-90.0
yw ood
two (
, qually spared, staggered center rows
TA
W 98
Min. 19/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-inch dlametertin caps with 11 ga. annular
4-Inc
j�' . at min.4lnch la and flinch o.c, at
ggered
None
SBS-SA, APP-SA
-97.5
Inch plywood
top)
ring shank nails.
four (
)jj quallyspaced, st center rows
W 99
Min. 15/32-
Elastabase, Elastobase P
Simplex MARX Cap
6-10
three
'o at min. 2-Inch lap and 6-Inch o.c. at
equally spaced, staggered center
None
SBS-AA, SBS-TA, APP-
-105.0
Inch plywood
N.
TA
rOWs
r
W-100
Min. 19/32-
Elastobase, Elastobase P
32 ga., 1-5/8-Inch diameter tin ups with 11 ga. annular
6-in
io . at min. 4-Inch lap and 6-inch o.c. at
None
SBS-AA, SBS-TA, APP-
inch plywood
ring shank nails
four(
)! quallyspaced, staggered center rows
TA
-112.5
Min.
Elastobase, Elastabase P (poly -film
32 ga., 1-5/8-Inch diameter tin ups with 11 ga. annular
6-Inc
I
�°7 . at min. 4-inch lap and 6-Inch o.c. at
W-101
Inch plywood
plywood
top)
ring shank nails. Note: rn caps are to be primed with
(
);'equally spaced, staggered center rows
None
SBS-SA, APP-SA
-112.5
PG100 orA5TM D41 primer.
ASPHALT-APPLRD OBToacx-APiium Bmifiw: ¢¢four
W-102
Min. 15/32-
Elastabase, Elastobase P
Simplex MAXX Cap
9-Inc'8
c. at min. 2-Inch lap
and 18-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
-05.0•
Inch plywood
two I:
j�, qually spaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
W-103
MinInch APA32
Elastabase, Elastobase P
32 ga., 1-5/8-Inch diameter tin caps with 12 ga. annular
6-Inc
to c. at min. 3-Inch laQ
and 6-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
rated O50
ring shank nails
four (
)1 equally spaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-45.0
W-204
Min. 15/32-
Inch APA
Polyglass APP Base
32 ga., 1-5/8-Inch diameter tin ups with 12 ga. annular
ring shank nails
6-Inc
four (ilequally
(o c. at min. 3-Inch la
h
spaced, staggered
and 6-Inch o.c. at
Q
center rows
APP-TA
APP-TA
-45.0
rated OSB
I
W-105
Min. 15/32-
Elastobase, Elastobase P
Simplex MAXX Cap
9-Inc
�u c. at min. 2-Inch lap
and 12-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
-52.5
inch plywood
pyw
two (j�
quallyspaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
W-106
Min. 15/32-
Elastobase, Elastobase P
Original Simplex Cap Nails (I -Inch metal head.diameter,
6-Inc
to c. at min. 3-Inch lap
and 6-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
Inch plywood
11 gauge x min.1.25-Inchlong annular grooved shank)
four(,)�equally
spaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-52.5
W 107
MIn. 15/32-
Inch plywood
Polyglass APP Base
Original Simplex Cap Nails (1-Inch metal head diameter,
11 gauge x min. 1.15-Inch long annular grooved shank)
6-Inc
four(
1 c. at min. 3-Inch lap
), equally spaced, staggered
and 6-Inch o.c. at
center rows
APP TA
APP-TA
-52.5
Elastobase, Elastobase P, Polyglass
f
W-108
Min. 19/32-
62 Base, ME, Base, J Permse,
Firestone Base,1Mr
32 ga.,1-5/8-Inch diameter tin caps with ll ga.annular
8-In
three
a c. at min. 4-Inch lap
equally spaced, staggered
and 8-Inch o.c. a[
center
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA,SBS-
-fi0.0
Inch plywood
Glass GAFGPly
28, Tamko Glass Base or GAFGLAS
ring shank nails
rows
� I
.
TA, APP-TA
AA, SBS-TA, APP-TA
875
W-109
Min. 15/32-
Polyglass G2 Base, Elastobase,
32 ga., 1-5/8-Inch diameter tin caps with 31 Be. annular
8-incilu
c. at min. 4-Inch lap
and 8-Inch o.c, at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
inch plywood
Elastobase P
ring shank nails
four (p);
equally spaced, staggered
center rows
I TA, APP-TA
AA, SBS-TA, APP-TA
-67.5
NEMO ETC, LLC
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization N32455 6Te EDITION (2017) FBC NON-HVHZ EVA�.�U
TION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof systems; (95
) 733-1330 Appendix 1, Page 19 of 65
i�
t � ONEMOjetc.
....
.. (TEAR -OFF)
SYSTENITYPEE: NON -INSULATED, MECHANICALLY ATTACHED BASE
SHEET (NAILS), BONDED ROOF COVER
System .. .... -',' ,._ 1 ',,.r .,, Base Sheet,'Gr
, �'yp, . M's �5�4 i .4t + Ryaf,Covey(Note 15)ni �tr tl hiMDP`.
, f i
No.
Deck (Note 1).
Type
.Fasten
I` Attacl'i, F�"
f ,'Base PI
Cap Ply r,'".(Psfl ,-
W-110
Min. 15/32-
Polyglass APP Base
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
8-Inch ..at min. 4-Inch lap and 8-Inch o.c. at
l
APP-TA
APP-TA
-67.5
Inch plywood
ring shank nails
four (4 qually spaced, staggered center rows
10-Incl b c. at min. 4-Inch la 3 and 10-Inch o.c.
W-111
Min. 15/32-
Polyglass G2 Base, Elastohase,
Simplex MAXX Cap
II
at three ), equally spaced, staggered center
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
-75.0
Inch plywood
Elastobase P
TA, APP-TA
AA, SBS-TA, APP-TA
rows
10-Incl'
6 c. at min. 4-Inch lap and Minch o.c.
W-112
Min. 15/32-
Polyglass APP Base
Simplex MAXX Cap
at thr
e( ), equally spaced, staggered center
APP-TA
APP-TA
-75.0
Inch plywood
rows
q
Min. 15/32-
Polyglass G2 Base, Elastobase,
9-Inch
I at min. flinch lapland 9-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
W-113
Inch plywood
Elastobase P
Simplex MAXX Cap
four (4,
quallyspaced, staggered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-90.0
Min. 15/32-
9-inch
;.l . at min.4lnch lapland 9-Inch o.c. at
W-114
Inch plywood
Polyglass APP Base
Simplex MAXX Cap
four (4
,equally spaced, staggered center rows
APP TA
APP-TA
-90.0
W-115
Min. 15/32-
Elastobase, Elastobase P
Simplex MARX Cap
6-Inch
I.� - at min. 2-Inch [a and &Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
-90.0
Inch plywood
two (2
,equally spaced, staggered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
W-116
Min. 15/32-
Elastobase, Elastobase P
Simplex MAXX Cap
6-Inch
three
.i . at min. 2-Inch lap and 6-Inch o.c. at
equally spaced, staggered center
BP -AA, SBS-AA, SBS-,
SBS-SA, APP-SA, SBS-
-SO5.0
Inch plywood
�)�
7A, APP-TA
AA, SBS-TA, APP-TA
rows
Min. 19/32-
32 ga., 1-5/8-Inch diameter tin raps with 11 ga. annular
6-Inch
. at min. flinch lapland 6-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP SA, SBS-
W-317
Inch plywood
Elastobase, Elastobase P
ring shank nails
four(
,quallyspaced, staggered center rows
APP-TA
AA, SBS-TA, APP-TA
-112.5
'.Sn AGHERINa BASEPLY: ,,.. .,
..
iTA,
Min. 15/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-inch diameter tin caps with 12 ga. annular
6-Inch
1
. at min. 3-Inch lap 6-Inch o.c. at
SBS-SA
SBS-SA, APP-SA, 5B5-
W-338
Inch APA
top)
ring shank nails
four(h
�.l
quallyspaced, sta gered center rows
I
TA, APP-TA
_45.0
rated OSB
W-119
Min. 15/32-
Elastobase, Elastobase P (poly -film
Original Slmplex Cap Nails (1-inch metal head diameter,
6-Inch
' . at min. 3-Inch lapand6-Inch o.c. at
SBS-SA I
SBS-SA, APP-SA, SBS-
-52.5
inch plywood
top)
11 gauge x min.1.15-inch long annular grooved shank)
four (4'�;�qually
spaced, staggered center rows
TA, APP-TA
W-120
Min. 15/32-
Polyglass APP Base, Elastobase,
Original Simplex Cap Nails (1-Inch metal head diameter,
6-Inch
P, . at min- 3-Inch lap ll and 6-Inch o-c- at
PoIYRex SA Base
APP-TA
-52.5
Inch plywood
Elastobase P(poly-film top)
11 gauge x min.1.25-inch long annular grooved shank)
four(4„qually
spa ced, staggered center rows
Min. 19/32-
Min.
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
8-Inch
three
�� . at min.4inch lap and 8-Inch o.c, a[
equally spaced, st center
SBS-SA
SBS-SA, APP-SA, SBS-
-60.0
Inch plywood
top)
ring shank nails
ggered
t)�
TA APP TA
rows
11
MIn. 19/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-inch diameter tin caps with 11 ga. annular
8-Inch
three
.i . at min. 4-Inch lapland 8-Inch c.c. at
� )� atspaced, staggered center
Polyflex SA Base
APP-TA
-60.0
W-122
Inch plywood
top)
ring shank nails
rows
Min. 19/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
4-Inch
of . at min. 4-Inch lapland 41nch o.c. at
SBS-SA
SBS-SA, APP-SA, SBS-
97 5
W-123
Inch plywood
top)
ring shank nails.
four(
)�S� quallyspaced, staggered center rows
TA, APP-TA
W 124
Min. 19/32-
Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
4-Inch
�.. at min. 4-inch lapland 4-Inch o.c. at
Polyfiex SA Base
APP-TA
-97.5
Inch plywood
top)
ringshank nails.
four(
)„ quallyspaced, staggered center rows
NEMO ETC, LLC
Evaluation Report P9290,02.08-R21 for FL3654-R23
Certificate of Authorization #32455 6n' EDITION (2017) FBC NON-HVHZ EVAL
U TION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9
iq 233-1330 Appendix 1, Page 20 of 65
etc.
ONEM01TABLE
IG: WOOD DECKS — NEW CONSTRUCTION
OR REROOF (TEAR -OFF)
ATTACHEDSYSTEMTYPEE: NON -INSULATED, MECHANICALLY
BONDED ROOF COVER
S stem
Y Beck (Note 1)
�_..... Base`She et` .,..F `'
�d'I • Raoi Co"ver Note 15)''J "„4 '' -MDP,x
�s r,.'Base
''I (,
No.
-
.Type
Fasten - • I
_
,(. Attac ....., �,.',•
Ply ..:',
.,„, CaPPly
Min. Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
6-Inc
f C. at min. 4-Inch lap and 6-Inch o.c. a[
Elastoflex SA V Plus,
SBS-SA, APP-SA, SBS-
W-125
Inch plywood
d tap)
ring shank nails. Note: Tin caps are to 6e primed with
�) ,
spaced, staggered center
ElastaFlex SAVPIus
112
-.5
PG100 orASTM D41 primer.
qually rows
FR
TA, APP-TA
Min. 19/32- Elastobase, Elastobase P (poly -film
32 ga., 1-5/8-Inch diameter tin caps with 11 ga. annular
6-Inc
. a[ min. 4-Inch la ¢ and 6-Inch o.c. at
W-126
Inch plywood tap)
ring shank nails. Note: Tin caps are to be primed with
four
equallyspaced, staggered center rows
PolyRex SA Base
APP-TA
-112.5
PG100 or ASTM D41 primer.
I p
WOOD DECKS
I�
SYSTENITYPEE: NON -INSULATED, MECHANICALLY ATTACHED BASE SHEET
(SCREWS &PI-ATEs),
BONDED ROOF COVER
System
fleck (Note 3)
,Base Sheet'
;" i
I Roof Caber Note15
( ) .' " MOP..;f
No.
Type , . - Fasten ' ". ,Vv
9' .
;i ' iAttachf
,.
,.,Base PIY"' ,Cap s(P?i)
NOWEOLY: ,. .J �• •.',- it n', �, Y�, ea, a�o-rtJ.h.- { _'4� .1.la�u�zJu��bV„sada air. nL./{v
N
_ t
(#s'x �,ryt T) e
kf1wY �s4..^ ,. .xi
rt'irf
a .M. `*Y.,,: i{'!ff...eL^i k�'^'Gic ^.-4k'.dE �, .,•tY"�Ict'0.:�'•.v.i: �;'te4`a'f'�M13T[i=ulJr`
Elastobase, Elastobase P,
7
I
Polyglass G2 Base,
Min. 19J32-Inch
CertainTeed Glashase,
OMG Flat Bottom Plates (square) with Roofgrip 014,
12-Inc.
I
.c. at min. 4-Inch lap
and 12-Inch o.c. at
SBS-AA, SBS-TA, APP-
W-127
plywood
Firestone MB Base, JM
Dekfast Hex (aka, Dekfast PUT-H-2-7/8) with Dekfast #14 or
two(
), qually spaced, staggered
center rows
None
TA
-52.5
Perma-Ply 28, Tamko Glass
Trufast 3" Metal Insulation Plate with Trufast HD
Base or GAFGLAS N75
W-128
Min. 19/32-Inch
Elastobase, Elastobase P
OMG Flat Bottom Plates (square) with Roafgrlp q12
12-Inc
.c. at min. 4-Inch I
p and 12-Inch D.C. at
None
SBS-AA, SBS-TA, APP-
-60.0
plywood
twoO,I
qually spaced, staggered
center rows
TA
Min. 19/32-Inch
Trufast Versa Fasteners (min. W penetration) & Plates;
l
APA rated OSB
Elastobase, Elastobase P
2 screws per plate Installed I80° into the holes o,the
12-In
hvo (
.c. at min.4inch I
), spaced, sta6ered
p and 12-Inch D.C. at
center
None
SBS-AA, SBS-TA, APP-
TA
-67.5
W-129
or plywood
plate, parallel to the width -direction of the sheet
qually
rows
Note:
"For re -roof or recover construction, field withdrawal resistance testing (Nate 11) shall yield mj
ntum 199 lbf.. Additional
Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
I
Min. 19/32-Inch
Trufast Versa Fasteners (min.'/." penetration) & Plates;
I
APA rated OSB
Elastobase, Elastobase P
(poly -film top)
2 screws per plate Installed 180° into the holes o,the
12-In
two (f,
In.c. at min. 4-Inch lap
qually spaced, sta�gereci
and 12-Inch o.c. at
center rows
None
SBS-SA, APP-SA
-67.5
W-13o
or plywood
plate, parallel to the width -direction of the sheet
I
I
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield m
um I9916f. Additional
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
h
Min. 19/32-Inch
Trufast Versa Fasteners (min.'s/." penetration) & Plates;
12-In
hI at min.4-inch I
p and 32-Inch o.c. a[
APA rated O50
Polyglass APP Base
2 screws per plate Installed 180°Into the holes of the
.c.
None
APP-TA
-67.5
W-131
or plywood
plate, parallel to the width -direction of the sheet"
two (
�, qually spaced, staggered
center rows
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield an
Q um 199lbf. Ad
'd net Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
k
NEMO ETC, LLC
f.
i Evaluation Report P9290.02.08-R21 for FL1654-RZ3
Certificate of Authorization #32455 0 EDITION (2017) FBC NON.HVHZ EVA
U6 ATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (95
) 233-1330 Appendix 1, Page 21 of 65
II
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast #14,
W-132
Min. 15/32-Inch
Polyglass G2 Base,
OMG 3" Round Metal Plate with OMG HD, OMG Flat
10-Inc
� at min. flinch lap
and 10-Inch o.c. at
None
SBS-AA, SBS-TA, APP-
-7' a
plywood
Elastobase, Elastobase P
Bottom Plate (Accutrac) with Roofgrip 014 or Trufast 3"
three (1)f
qually spaced, sta
gered center rows
TA
Metal Insulation Plate with Trufast HD.
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast #14,
Sf
1
W-133
Min. 15/32-Inch
Polyglass APP Base
OMG 3" Round Metal Plate with OMG HD, OMG Flat
10-Inc
'' . at min. 4-Inch la�
and 10-Inch o.c. at
None
APP-TA
-75.0
plywood
Bottom Plate(Accutrac)with Roofgrip#14 or Trufast 3"
three(
qually spaced, staered
gg center rows
Metal Insulation Plate with Trufast HD.
f)
R
i
Min. 15/324nch
Trufast Versa Fasteners (min. Y." penetration) & Plates;
9-Inch
f.c at min. 2-Inch lap
nd 12-Inch o.t. at
SBS-AA, SBS-TA, APP-
APA rated OSB
Elastobase, Elastobase P
2 screws per plate Installed 180' into the holes of the
two (2)
I wally spaced, staggered
center rows
None
TA
-90.0
W-134
or plywood
plate, parallel to the width-dlrection of the sheet"
(11
Note:
*For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield mI
i um 159 lbf. Addi'�lonal
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
F,
Min. 15/32-Inch
Trufast Versa Fasteners (min. W penetration) & Plates;
9-Inch
4Q cI at min. 2-Inch laptrtr,,�nd
12-Inch o.c. at
APA rated OSB
Polyglass APP Base
2 screws per plate installed 180° into the holes of the
woo (2)`4q
ually spaced, staggered
center rows
None
APP-TA
-90.0
W-135
or plywood
plate, parallel to the width -direction of the sheet-
II I
Note:
"For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield ml
i um 159lbf. Additional
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast 914,
Min. 15/32-Inch
Polyglass G2 Base,
OMG 3" Round Metal Plate with OMG HD, OMG Flat
9-Inch
at min. 4-Inch lap
�nd 9-Inch o.c. at
None
SBS-AA, SBS-TA, APP-
-90.0
W-136
plywood
Elastobase, Elastobase P
Bottom Plate (Accutrac) with Roofgdp 914 or Trufast 3"
four (4
if
R ually spaced, staggered
center rows
TA
Metal Insulation Plate with Trufast HD.
I
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast#14,
Min. 15/32-Inch
OMG 3" Round Metal Plate with OMG HD, OMG Flat
9-Inch
c at min.4lnch lap
'nd 9-Inch o.c. at
None
APP-TA
-90.0
W-137
plywood
Polyglass APP Base
Bottom Plate (Accutrac) with Roofgrip #14 or Trufast 3"
four (4
}� ually spaced, sta
ered center rows
Metal Insulation Plate with Trufast HD.
Min. 15/32-Inch
Trufast #12 DP orTmfast 914 HD with Trufast 3" Metal
6-Inch
�.c at min. 4-Inch lap
`�md 6-Inch o.c. at
None
SBS-AA
-90.0
W-138
plywood
Elastobase, Elastobase P
Insulation Plates
three
O} qually spaced, staggered
center rows
Min. 15/32-Inch
OMG #12Standard Roofgrip or OMG H14 Heavy Duty with
iI
5 at min.4ined lap
o.c. at
gge
SBS-AA, SBS-TA or
W-139
plywood
Elastobase, Elastobase P
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
three (
three
11 qually spaced, staggered
renter rows
ed center
None
APP-TA
-g0.0
Plates
Min. 15/32-Inch
OMG 012 Standard Roofgrip or OMG #14 Heavy Duty with
6-Inch
at min. 4-Inch lap
6-Inch o.c. at
W-140
Polyglass APP Base
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
None
APP-TA
-90.0
plywood
Plates
three (S,
qually spaced, sta
II
Lnd
gered center rows
Min. 15/32-Inch
Trufast Versa Fasteners (min. Y.." penetration) & Plates;
6-inch
(!
at m1n.41nch lap
�'
nd &Inch o.c. at
None
SBS-AA, SBS-TA, APP-
-105.0
W-141
APA rated OSB
Elastobase, Elastobase P
2 screws per plate Installed 180' Into the hales of [he
three (�
qually spaced, staggered
center rows
TA
or plywood
plate, parallel to the width -direction of the sheet'
NEMO ETC, LLC
Certificate of Authorization #32455
Prepared by: Robert Nleminen, PE-59166
6- EDITION (2017) FBC NON-HVHZ EVAL TION
Polyglass Modified Bitumen Raof Systems; 1
9 4 233-1330
Evaluation Report P9290.02.08-R21 for FL1654-RZ3
Revision 21: 10/08/2018
Appendix 1, Page 22 of 65
I
1
b
I, -
I
ONEM01 etc.
TABLE IH: WOOD .
SYSTEMTYPEE: NON -INSULATED, MECHANICALLY ATTACHED BASE SHEET
(SCREWS& PLATES),
BONDED ROOF COVER
.,
System Base Sheet + ;
ii�� _...'.�
d • RoufCover (Note 15){"� '� 'MDP,''+
No. Deck (Note 1) Type 'Fastens+ -- ,
�.;,I ,,.Attach
) e '+•d ase Fly`, uCap ,r
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield mi
n'j 1 um 103lbf. Additional
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
I,
Min. 15/32-Inch
Trufast Versa Fasteners (min. W penetration) & Plates;
6-Inc
o.. at min. 41nch lap11
and 6-Inch o.c. at
APA rated OSB
Polyglass APP Base
2 screws per plate Installed 180' Into the holes of the
three
3 equally spaced, staggered
center rows
None
APP-TA
-SOS.O
W-142
or plywood
plate, parallel to the width -direction of the sheet-
Note:
-For re -roof or recover construction, fleld withdrawal resistance testing (Note 11)Shall yield mi
i um 103lbf. Additional
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
W-143
Min. 15/32-Inch
Elastobase, Elastobase P
Trufast H12 DP or Trufast 014 HD with Trufast 3" Metal
6-Inc
F ... . at min. 4-Inch lap and 6-Inch o.c. at
None
SBS-AA
-120.0
plywood
Insulation Plates
five (
1,1 qually spaced, staggered center rows
MIn. 15/32-Inch
OMG H12Stan dard Roofgrip or OMG H14 Heavy Duty with
6-Inc
I'
o..at min. 4-Inch lap aned
SBS-AA, SBS TA or
W-144
plywood
Elastobase, Elastobase P
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
five (
centero.c.
00, qually spaced, staggered center rows
rot
None
APP TA
-120.0
Plates
I
OMG H12 Standard Roofgrip or OMG 014 Heavy Duty with
6-Inc
I
o at min. flinch lap and 6-Inch o.c. at
W-145
Min. 35/32-inch
plywood
Polyglass APP Base
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
five (',I
qually spaced, staggered center rows
None
APP-TA
-120.0
Plates
E, +T `t,ae''..
f � 1 t w t .Y�"
y 3�+`y°CQ"x,. t •'�
:.ASPRALT•APPDEDOBTURoi-APPDED
BA1e PIY. �'• -...
:.. 1}�..:5 <w3k_.klia i �.�`:'r,rt- •fv x.P
u,.„i .. YF TA.il_ F« ..riY.eL.n a-'. • wu N .C� .'t��-X f
✓ }tA:t�].'R Anna- ,..vl
a
Elastobase, Elastobase P,
(
Min. 19/32-Inch
Polyglass G2 Base,
CertainTeed Glasbase,
OMG Flat Bottom Plates (square) with Roofgrip #14,
12-in
h .c. at min.4-Inch lap and 12-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
W-146
plywood
Firestone Base,JM
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast #14 or
two
r
), !qually spaced, sta gered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-52.5
28
Perma-Ply 28, Tamko Glass
Trufast 3"Metal Insulation Plate with Trufast HD
Base or GAFGLAS h75
W-147
Min. 19/32-inch
Elastobase, Elastobase P
OMG Flat Bottom Plates (square) with Roofgrip 012
12-Inh
.c. at min. 4-inch lap and 12-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA,SBS-
AA, SBS-TA, APP-TA
-60.0
plywood
two (
), qually spaced, staggered center rows
TA, APP-TA
Min. 19/32-Inch
Trufast Versa Fasteners (min. Y.." penetration) & Plates;
12-in
h .c. at min. 4-Inch lap and 12-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
APA rated OSB
Elastobase, Elastobase P
2 screws per plate installed 180' into the holes of the
two ()
qually spaced, staggered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-67.5
W-148
or plywood
plate, parallel to the width -direction of the sheet•
!1 I
Note:.
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield in
n` um 19916f. Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
Min. 19/32-Inch
Trufast Versa Fasteners (min. W penetration) & Plates;
32-in
1
h .c. at min.4inch I�p and 12-Inch o.c. at
APP-TA
APA rated OSB
Polyglass APP Base
2 screws per plate installed 180" Into the holes of the
two (`)
qually spaced, staggered center rows
APP TA
-67.5
W-149
or plywood
plate, parallel to the width -direction of the sheet"
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield m
um 1991bf Additional Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
In`
!
NEMO ETC, LLC
i
I
i Evaluation Report P9290.02.08-1121 for FL1654-R23
Certificate of Authorization #32455 En' EDITION (2017) FBC NON-HVHZ EVI
L ATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems;
95 ) 233.1330 Appendix 1, Page 23 of 65
(I '
ONEMOjetc.
TABLE IH: ....REROOF
(TEAR -OFF) on RECOVER
ATTACHEDSYSTEMTYPEE: NON -INSULATED, MECHANICALLY :
BONDED ROOF
S `Base SheeF e '-i s_1++
y i
-,,
i v y; k aY C Y Rooitoven note 15 i
( )� }
Noem
Deck Note 1
( )
-.
e
Fasten
�Y ,Attachl ` ' `'
Base Ph
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast 414,
Min. 15/32-Inch
Polyglass G2 Base,
OMG 3" Round Metal Plate with OMG HD, OMG Flat
10-in
. at min.4-Inch lap and 10-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
W-150
plywood
Elastobase, Elastobase P
Bottom Plate (Accutrac) with Roofgrip g14 or Trufast 3"
three ()
i P
qually spaced, sta gered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-75.0
Metal Insulation Plate with Trufast HD.
Dekfast Hex (aka, Dekfast PLT-H-2.7/8) with Dekfast #14,
Min. 15/32-Inch
CMG 3" Round Metal Plate with OMG HD, OMG Flat
10-Inc
.. at min. 4-Inch lJ
and 10-Inch o.c. at
W-151
plywood
Polyglass APP Base
Bottom Plate (Accutrac) with Roofgrip 014 or Trufast 3"
three
equally spaced, staggered
center rows
APP-TA
APP-TA
-75.0
Metal Insulation Plate with Trufast HD. .
ii
Min. 15/32-Inch
Trufast Versa Fasteners (min. V" penetration) & Plates;
9-inch
11
c at min. 2-Inch lap
nd 12-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
APA rated OSB
Elastobase, Elastobase P
2 screws per plate Installed 180° Into the holes of the
two (2)�N�
wally spaced, stag
ered center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-90.0
W-152
or plywood
plate,. parallel to the width -direction of the sheet
(I
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield mir
Im um 159 lbf. Addi
llonal Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
c
Min. 15/32-inch
Trufast Versa Fasteners (min. W penetration) & Plates;
I
APA rated OSB
Polyglass APP Base
2 screws per plate Installed 180' Into the holes of the
9-inch
two (2)I�g
Q.c at min. 2-Inch lap I'
ually spaced, staggered
nd 12-Inch a.c. at
center rows
APP TA
APP-TA
W-153
or plywood
plate, parallel to the width -direction of the sheet-
lfonal
Note:
"For re-roofor recover construction, field withdrawal resistance testing (Note 11) shall yield mi
ilum 35916f. Addi
Versa -Fast Fasteners within each Verso -Fast Plate may be utilized [o
produce minimum withdrawal resistance
N 1�
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast #14,
Min. 15/32-Inch
Polyglass G2 Base,
OMG 3" Round Metal Plate with OMG HO, OMG Flat
9-Inch
i.2 at min. 4-Inch lap
nd 9-Inch o.c. at
BP -AA, SBS-AA, SBS-I
SBS-SA, APP-SA, SBS-
W-154
plywood
Elastobase, Elastobase P
Bottom Plate (Accutrac) with Roofgrip 814 or Trufast 3"
four (4;I
ually spaced, stag
I'
Bared center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-90.0
Metal Insulation Plate with Trufast HD.
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast R14,
W-155
Min. 15/32-Inch
Polyglass APP Base
OMG 3" Round Metal Plate with OMG HD, OMG Flat
9-Inch
.c at min. 4-Inch lap
nd 9-Inch o.c. at
APP TA
APP-TA
-90.0
plywood
Bottom Plate (Accutrac) with Roofgrip 914 or Trufast 3"
four (4
wally spaced, staggered
center rows
Metal Insulation Plate with Trufast HD.
jl
k
W-156
Min. 15/32-Inch
Elastobase,ElastobaseP
Trufast#12 DP or Trufast#14 HD with Trufast 3" Metal
6-Inch
'.c at min. 4-Inch lap
�nd 6-inch o.c. at
Bp -AA or SBS-AA
SBS-AA
-90.0
plywoodInsulation
Plates
three (
)j qually spaced, stii
gered center rows
Min. 15/32-Inch
OMG #12 Standard Roofgrip or OMG #14 Heavy Duty (min.
6-Inch
SI at min. 4-Inch lap
6-Inch o.c. at
BP -AA, SBS-AA, SBS
SBS-SA, APP-SA, SBS-
W-157
plywood
Elastobase, Elastobase P
1-5/8-Inch long) with OMG 3" Round Metal Plates or OMG
three(
r I
),I qually spaced, staggered
ind
center rows
TA, APP-TA
AA,SBS-TA,APP-TA
-90.0
Flat Bottom Metal Plates
Min. 15/32-Inch
OMG a12 Standard Roofgrip or OMG #14 Heavy Duty with
6-inch
. at mih. 4-Inch lap
I
nd o.c. a[
W-158
plywood
Polyglass APP Base
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
three (�)
qually spaced, sta
gered center rows
ed center
APP-TA
APP-TA
-90.0
Plates
V
Min. 15/32-Inch
Trufast Versa Fasteners (min. 3/m penetration) & Plates;
6-Incho,
�( at min. 4-Inch lap
nd 6-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
W-159
APA rated OSB
Elastobase, Elastobase P
2 screws per plate installed 180' Into the holes of the
-
three (
qually spaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-105.0
or plywood
plate, parallel to the width -direction of the sheet
.)'
I
NEMO ETC, RC
F
Evaluation Report P9290.02.08-R21 for FL1652r-R23
Certificate of Authorization 832455 bra EDITION (2017) FBC NON-HVH2 EVAL
TION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9¢'4
233.1330 i Appendix 1, Page 24 of 65
ONEMO "etc.
TABLE IH: WOOD .
j
SYSTEM TYPE E: NON -INSULATED, MECHANICALLY ATTACHED BASE SHEET
(SCREWS PLATES), BONDED ROOF COVER
•"'k';
System Base Sheet
�'r'I ° ;Roof Cover(Note'35��' t`' r� ?: MUP'
No.
Deck (Note 1)
Type Fasten
i.` At[acf(
Base Plyf'(Psfl'-
Note:
'For re -roof or recover construction, field withdrawal resistance testing (Note I1J shall yield mmum
�hl'�103lbf. Additional Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
Min. 15/32-inch
Trufast Versa Fasteners (min.''/." penetration) & Plates;
6-Inc
j
a . . at min. 4-Inch l ap and 6-Inch o.c. at
APA rated OSB
Polyglass APP Base
2 screws per plate Installed 180°into the holes of the
three
3 sc�aggered center rows
(3) equally spaced,
APP-TA
APP-TA
-105.0
W-160
or plywood
plate, parallel to the width -direction of the sheet'
Note;
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield m
nlmum 1031bf. Additional
Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
W-161
Min. 15/32-inch
Elastobase, Elastobase P
Trufast #12 DP or Trufast #14 HD with Trufast 3" Metal
6-Inc
'o c at min. 4-Inch 41
and 6-Inch o.c. at
BP -AA or SBS-AA
SBS-AA
-120.0
plywood
Insulation Plates
five (
) qually spaced, staggered
center rows
Min. 15/32-Inch
OMG 012 Standard Roofgrip or OMG H14 Heavy Duty with
6-Inc
f o c. at min. 4-Inch la
and 6-Inch o.c. at
BP -AA, SBS-AA, SBS-
SBS-SA, APP-SA, SBS-
W-162
plywood
Elastobase, Elastobase P
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
five (
) qually spaced, staggered
center rows
TA, APP-TA
AA, SBS-TA, APP-TA
-120.0
Plates
n
W-163
Min. 15/32-inch
Polyglass APP Base
OMG #12 Standard Roofgrip or OMG #14 Heavy Duty with
OMG 3" Round Metal Plates or OMG Flat Bottom Metal
6-Inch' C. at min. 4-Inch la
and 6-Inch a.(;. at
APP-TA
APP-TA
-120.0
plywood
five ( ) qually spaced, staggered
center rows
Plates
SELF-AUHENING BASE PLY.,� ".- .•- ... -,� .-.-,', q. "'s ,. �•tal'`�v�i 1t�S3¢6.�.'li „,
_�
4.�''tt..a�n(,��mn,�<.?aJ.
N
Min. 19/32-Inch
Elastobase, Elastobase P
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast #14 or
12-in
h .c. at min.4-Inch lap
and 12-inch o.c. at
SBS-SA
SBS-SA, APP-SA, SBS-
-52.5
W-364
plywood
(poly -film top)
Trufast 3" Metal Insulation Plate with Trufast HD
two (
), equally spaced, staggered
center rows
TA APP TA
Min. 19/32-Inch
Elastobase, Elastobase P
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast 014 or
12-In
h .c. at min.4-Inch I�ap and 12-Inch o.c. at
Poly0ex SA Base
APP-TA
-52.5•
W-165
plywood
(poly -film top)
Trufast 3" Metal Insulation Plate with Trufast HD
two (
gere
), equally spaced, stagd center rows
W-166
Min. 19/32-Inch
Elastobase, Elastobase P
OMG Flat Bottom Plates (square) with Roofgrip 012
12-In
.e. at min.4-Inch lap and 12-Inch o.c. at
SBS-SA
SBS-SA, APP-SA, SBS-
TA, APP-TA
-60.0
plywood
(poly -film top)
two (
); equally spaced, st ggered center rows
W-167
Min. 19/32-Inch
Elastobase, Elastobase P
OMG Flat Bottom Plates (square) with Roofgrip 912
12-in
.c. at min. 4-Inch lap and 12-Inch o.c. of
FolyFlex SA Base
APP-TA
-60.0 .
plywood
(poly -film top)
two (F)
/ equally spaced, staggered center rows
Min. 19/32-Inch
Trufast Versa Fasteners (min. 9W penetration) & Plates;
124n)
4-Inch 1ep
and 12-Inch o.c. at
SBS-SA, APP-SA, SBS-
APA rated OSB
Elastobase, Elastobase P
(poly -Rim top)
2 screws per plate Installed 180' Into the holes of the
two
.c. at min.
4) equally spaced, staggered
center rows
SBS-SA
TA, APP-TA
-67.5
W-168
or plywood
P Yw'
late, parallel to the width -direction of the sheet*
P P
� I
Note:
`For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield n
1, ' mum 199 Rif. AdIfitlonal
Versa -Fast Fasteners within each Versa -Fast Plate may be utilized to
produce minimum withdrawal resistance
Min. 19/32-Inch
Trufast Versa Fasteners (min. Y." penetration) & Plates;
`
12-Inch
APA rated O5B
Elastobase, Elastobase P
(poly -film top)
2 screws per plate installed 180° Into the hales of the
12-I
two
c" o.c. at min. 4-Inch
h
2) equally spaced, staggered
a and o.c. at
, P
center rows
PolyFlex SA Base
APP-TA
W-169
or plywood
P Yw'
plate, parallel to the width -direction of the sheet•
t I
Note:
-For re -roof or recover construction, field withdrawal resistance testing (Note 11) shall yield n
II"i mum 199lbf. Additional
Versa -Fast Fasteners within each Versa -Fast Plate maybe utilized to
produce minimum withdrawal resistance
i� li
)
e II
NEMO ETC, LLC
Evaluation. Report P9290.02.08-R21 for FL1654R23
Certificate of Authorization #32455 6r" EDITION (2017) FBC NON•HVHZ EV
l ATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Rao;Systems;
(9 4) 233-1330 Appendix 1, Page 25 of 65
ALI
WNEMOjetc.
TABLEII: WOOD DECKS- NEW CONSTRUCTION
OR REI.-
SYSTEM TYPE F: NON -INSULATED, BONDED
ROOF COVER
System
No.
Deck (Note 1)
Primer
MDP
Ply -
tap ply
Min. 15/32-
(Optional) SBS-SA, SBS-
ISBS-SA, APP-SA, SBS-
W-170
Inch plywood
None
None
SBS-SA
I
I TA, APP-TA
'TA, APP-TA
-90.0
Min. 15/32-
W-171
Inch plywood
(Optional) PG100
None
Polyflex SAI
Base
(Optional) APP-TA
APP-TA
-90.0
W-172
Min. 15/32-
PG100
None
SBS-SA
11
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA, SBS-
ITA,APP-TA
-97.5
1 Inch plywood
TA, APP-TA
Min. 15132-
Plywood joints are covered with 4-Inch wide strips of Elastoflex SA V Plus, roll
a I to
E
Elastoflex
V Base r
Tonal) SBS-SA, SBS-
SBS-SA, APP-SA, SBS-
W-173
1 Inch plywood
(Optional) PG100
place to create continuous bond.
Elastoflex
V Fit B.0s.
IOAPAPP-TA
TA, APP-TA
-9 7.5
W-174
Min. 15/32-
POLYBRITE 745
None
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA, SBS-
.105.0
Inch plywood
TA, APP-TA
TAAPP-TA
Min. 15/32-
Plywood joints are covered with 4-Inch Wide strips of Elastoflex SA V Plus, roll
it I to
Elastoflex
AVPlus or
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA, SBS-
W-175
Inch plywood
(Optional) PGIOO
place to create continuous bond.
Elastoflex 5A
V Plus
TAAPP-TA
TA, APP-TA
-135.0
Min. 15/32-
Plywood joints are covered with 4-Inch wide strips of Elastoflex SA V Plus, roll(
10
W-176
Inch plywood
(Optional) PGIOO
place to create continuous bond.
�
Polyfl"SA
�
lase
(Optional) APP-TA
APP-TA
-135.0
NEMO ETC, LLC
j
Evaluation Report P9290.02.08-R21 for FL1654-1123
Certificate
of Authorization
#32455
GTH EDITION (2017) FBC NON-HVHZ
U TWI.
Revision 21: 1010812018
Prepared by: Robert Nleminen, PE-59166
Polyglass Modified Bitumen Roof Systems;
)233-1330
I
Appendix 1, Page 26 of 65
ONEM01e"tc.
TABLE2A: STEEL OR
..
ORRECOVER
SYSTEM TYPE B: MECHANICALLY ATTACHED BASE BONDED.•
BONDED
ROO
t .. . �r3 .
System Deck) Bese Insulatipn Layer _ trm ..
"Ih"sulatia✓i L`a e!'
# RooGtdver Na{e 15 `" s { I�tDp-,'
No.
(Note1
YP , Attach
e
Attach`
: Base plyh�
I-;,-,f'IY i.-„CapPlys k (Psff'•j
'SELF-AiikR No BASES / �.n r' '. rf� a'- v�J "' xF-'W* atIll
f „., e,,. vu� dt- .sJ +4...: /; y�Y1 y.. �,d.nrfdl. .,S9{T N+', wFte .d..
.y ''°� r,lV�°
.,.,.1. 'sa:
tet�c
T4t,,,c w.i�ii
�,J .�W �4+"4s r „e ".»f*+rr'e�t+'«SIY t.
,f. bepJ, }'b, ..fvs„+.+"r$3i dL T?'P:0..NN �
Min. 22 ga., type}
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast 014, OMG 3"
Min. 0.25-Inch
De ns Deck Prime or
SB5-CAI,
SC-1.
or min. 2,500 psi
EnergyGuard Palyiso
Galvalume Ribbons Plates with OMG
1 ft' 4
SECUROCK Gypsu
-Fiber Roof Boar
D-IS
SOS -SA
None
SBS-CA2,
-30.0•
structrual
Insulation, Polytherm H, H-
d14 Roofgrip or Trufast 3" Metal
PRIMER: POLNB
TE 745
APP-CA1
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast 014, OMG 3"
Min. 0.25-Inch
ns Deck Prime or
SBS-CAI,
SC-2.
or min. 2,500 psi
EnergyGuard Polyiso
Galvalume Ribbons Plates with OMG
per
1.6 fts
SECUROCK Gy
su -Fiber Roof Board
D-IS
SBS-SA
None
SBS-CA2,
-45.0
structrual
Insulation, Polytherm H, H-
d14 Roofgrip or Trufast 3" Metal
PRIMER: POL
TE 745
APP-CA1
concrete
Shield or Multi -Max FA3
.Insulation Plate with Trufast HD
Min. 0.25-Inch
dE ns Deck, Dens Deck
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
Prime, SECUR
C Gypsum -Fiber Roof
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast d14, OMG 3"
Board or SECU
b K Glass -Mat Roof
SBS-CA3,
SC-3.
or min. 2,500 psi
EnergyGuard Palyiso
Galvalume Ribbons Plates with OMG
1 per 4
Rz
Board, min. 7/
(i-Inch DEXcell
M-OSFA
SBS-SA
None
SBS-CA2,
-30.0-
structrual
Insulation, Polytherm H, H-
914 Roofgrip or Trufast 3" Metal
Cement Roof
o� d or min. 0.5-Inch
PG3 or M-
APP-CAI
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
SECUROCK Ce
left Roof Board
PRIMER; POLIB
13ITE 745
Min. 0.25-Inch
U ns Deck, Dens Dec:
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
Prime, SECUR_�C
Gypsum -Fiber Ro
f
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast d14, OMG 3"
1 per
Board or SECU
OCK Glass -Mat Roof
M-OSFA
SBS-CA1,
SC-4.
or min. 2,500 psi
EnergyGuard Polyiso
Galvalume Ribbons Plates with OMG
1.6 ft
Board, min. 7/�fi�inch
DEXcell
Ird
or M-PG3
SBS-SA
None
SBS-CA2,
-05.0
structrual
Insulation, Polytherm H, H-
d14 Roofgrip or Trufast 3" Metal
Cement Roof
o or min. 0.5-Inch
APP-CA1
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
SECUROCK Ce
t Roof Board
PRIMER: POL
B ITE 745
"
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
�I
B, Grade 40 steel
ACFoam II, ENRGY 3,
718) with Dekfast 914, OMG 3"
Min. 0.25-Inch
ns Deck Prime or
SBS-CA3,
SC-5.
or min. 2,500 psi
EnergyGuard Polyiso
Galvalume Ribbons Plates with OMG
1 ft' 4
SECUROCK Gy
is m-Fiber Roof Boar
OB500
SBS-SA
None
CA
SBS-2,
-30.0•
structrual
Insulation, Polytherm H, H-
014 Roofgrip or Trufast 3" Metal
PRIMER: POL
B ITE 745
APP-CA3
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm, -
Dekfast Hex (aka, Dekfast PLT-H-2-
j
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast 914, OMG 3"
Min. 0.25-Inc
0 ns Deck Prime or
SBS-CA3,
SC-6.
or min. 2,500 psi
EnergyGuard Palyiso
Galvalume Ribbons Plates with OMG
I per
SECUROCK Gy
is m-Fiber Roof Boar
OB500
SBS-SA
None
SBS-CA2,
-45.0
structrual
Insulation, Polythene H, H.
d14 Roofgrip or Trufast 3" Metal
PRIMER: POL
B ITE 745
APP-CA3
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam II, ENRGV3,
7/8) with Dekfast d14, OMG 3"
Min. 0.25-Inc
ns Deck Prime or
SBS-CA3,
SC-7.
or min. 2,500 psi
EnergyGuard Polyiso
Galvalume Ribbons Plates with OMG
1 ft, 4
SECUROCK Gy
IIs m-Fiber Roof Boar
rl
CR-20
SBS-SA
None
'SBS-CA2,
-30.0•
structrual
Insulation, Polytherm H, H-
d14 Roofgrip or Trufast 3" Metal
PRIMER: POL
B ITE 745
APP-CA1
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
NEMO ETC, LLC
Certificate of Authorization d32455
Prepared by: Robert Nieminen, PE-59166
6T" EDITION (2017) FBC NON-HVHZ EVA i4 TION
Polyglass Modified Bitumen Roof Systems; (ASP 233.1330
Evaluation Report P9290.02.08-R21 for FL1654-R23
Revision 21:10/08/2018
Appendix 1, Page 27 of 65
li
ONEMOletc.
TABLE2A: STEEL OR STRUCTURAL CONCRETE DECKS —NEW CONSTRUCTIUN,
KtKVU�
I I EAR-UFF) OR
RECOVER
SYSTEMTYPEB: MECHANICALLY ATTACHED BASE INSULATION, BONDED
TOP INSULATION,
BONDED
ROOF COVER
System Deck Liveri
No. (Note 2) iYpe
Attach
Atta'ch
BasoPly
P
P_
Min. 22 ga., type Min. 2-inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel ACFoam 11, ENRGY 3,
7/8) with Dekfast 814, OMG 3'
1 per Min. 0.25-Inch
je s Deck Prime or
SBS-CA1,
SC-8. or min. 2,500 psi EnergVGuard Polylso
Galvalume Ribbons Plates with OMG
1.6 ft2 SECUROCK Gyp
id -Fiber Roof Board
CR-20
SBS-SA
None
SRS-CA2,
-45.0
structrual Insulation, Polytherm H, H-
014 Roi or Trufast 3" Metal
PRIMER: POLY
lRI 745
APP-CA1
concrete Shield or Multi -Max FA3
Insulation Plate with Trufast HD
D"i
AspMALT-i BASE :'
Min. 22 ga., type
Dekfast Hex (aka, Dekfast PLT-H-2-
Min. 0.75-Inch
co Board
(Optional If
(p
(Optional If using
B, Grade 33 steel
Min. 1.5-inch Polytherm,
7/8) with Delkfast #14, Trufast 3"
1 per 2
(homogeneous
I cil
min 0 5-Inch
Hot
using AA
AA Base) BP -AA,
SBS-AA,
SIC -9.
or min. 2,500 psi
ACFoam 11, ENRGY 3, H-
Metal Insulation Plate with Trufast
ft2
Structodek Higi
0
nsl� �Iberbo
Fiberboard
.1PI halt
P JyBPi
1)
SBS-AA, SBS-TA or
SBS -TA,
-45.0-
structrual
Shield or Polytherm
HD or OMG 3-Inch Gaiv Plate with
Roof Insulation
SBS-AA
APP-TA
APP-TA
concrete
OMD HD
ri 22 ga., type
Dekfast Hex (aka, Dekfast PLT-H-2-
Min. 0.75-inch
�es
co Board
(Optional if
I ng
(Optional it using
B, Grade 33 steel
Min. 2-Inch Polytherm,
718) with Dekfast #14, Trufast 3"
IL per 4
(homogeneous
o , i
min. Inch
Hot
using AA
AA Base) BP -AA
SBS-AA,
SC-10.
or min. 2,500 psi
ACFoam 11, ENRGY 30 H-
Metal Insulation Plate with Trufast
ft2
Structodek HIg1
iD
insity Fiberboard
asphalt
Ply) BPi
SBS-AA, SBS-TAar
"'TA'
-45.0-
structrual
Shield or Polytherm
HD or OMG 3-inch Gaiv Plate with
Roof Insulation
SBS-AA
APP-TA
APP-TA
concrete
OMDHD
Min. 22 go., type
Dekfast Hex (aka, Dekfast PLT-H-2-
Min. 0.75-inch
esw
Board
(Optional If
(Optional if using
B, Grade 33 steel
Min. 1.5-Inch ENRGY 3. H-
7/8) with Dekfast #14 or Trufast 3"
)per
(homogeneous
o I j
min. O.S-Inch
Hot
using AA
AA Base) BP -AA,
SBS-AA,
5C-11.
or min. 21500 psi
Shield or Polytherm
Metal Insulation Plate with Trufast
2.33 11:2
Structodek HIgI
'D!ns
Iti, Fiberboard
asphalt
P ly) BP -AA,
SSS-AA, SBS-TA or
SBS-TA
APPi
-90.0
structrual
HD
Roof Insulation
SBS-AA
APP-TA
concrete
I
II
I
BP -AA, SRS-
Min.. 2ga.,type
Dekfast Hex (aka, Dekfast PLT-H-2-
Min. 0.75-inch
i
Board
AA (Top
SBS-SA,
B, Grade 33 steel
Min. 1.5-Inch ENRGY 3, H-
7/8) with Dekfast #14 or Trufast 3"
1 per
(homogeneous
c,
min. 0.5-Inch
Hot
surface
SBSi SBS-TA or
APP-SA,
-90.0
SC-12.
or min. 21500 psi
Shield or Polytherm
Metal Insulation Plate with Trufast
1.33 ftz
Structodek HISI
I
nsity Fiberboard
asphalt
primed with
APP-TA
SBS-TA or
structrual
HD
Roof Insulation
PG100
APP-TA
concrete
primer)
Min. 22 ga,, type
Min. 2-inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam 11, ENRGY 3,
Polyiso
7/8) with Dekfast 414, OMG 3"
Galvalume Ribbons Plates with OMG
per 4
Min. 0.25-Inch
DEXcell FA Glas
el
s ,Dec' "M or
t Roof Board
D-IS
SBS-CA1,
(Optional) SBS-CA1,
SBS-CA1,
sas-CA2,
-30 .0•
SC-13.
or min. 2,500 psi
EnergyGuard
ft2
SBS-CA2
5B5-CA2 1
structrual
Insulation, Polytherm H, H-
#14 Raoi or Trufast 3" Metal
SECUROCK Gyp
f
i-Fiber Roof Board
APP-CAS
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
�ell
B, Grade 40 steel
ACFoam 11, ENRGY 3,
EnergyGuard Polyiso
7/8) with Dekfast 414, OMG 3"
Galvalume Ribbons Plates with OMG
1 per
Min. 0.25-inch
DEXcell FAGIas
I
is Deck Prime,
at Roof Board or
D-IS
SBS-CAS,
(Optional) SBS-CA1,
SBS-CA1,
SBS-CA2,
-45.0
SC-14.
or min. 2,500 psi
1.6 ft?
'
585-CA2
5B5-CA2
structrual
Insulation, Polytherm K,
014 Roofgrip or Trufast 3" Metal
SECUROCK Gyp
I -Fiber Roof Board
APP-CA1
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
nfl
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for F1.1654-11123
Certificate of Authorization #32455 6- EDITION (2017) FBC NON-HVHZ EVAL [ON Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9��41�233-1330 Appendix 1, Page 28 of 65
ONEMOJ'e�'tc.
TABLE2A: STEEL ORREROOF
(TEAR -OFF) OR
RECOVER
SYSTEMTY• EB: MECHANICALLY ATTACHED BASE INSULATION,
BONDED
TOP INSULATION,
BONDED
ROOF COVER
System
Deck
Base Insulation Layer • -
p,lnsulatlon late
ICJ t7 ,
`�"* Roof Coveu(Note 35) ti"`ram r °,»., iMDP '
No.
(Note 1)
Type
Fasten
Attach
'
Ape - .'r'�
Attach
'Base Plyl,',
�;. Ply. ',IPP
s�'=.
Min. 0.25-Inns
Deck, Dens Deck
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
Prime, DEXcGlass
JiIF
Mat RoofB,
Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast 014, OMG 3"
1 p�r4
Board, SECUGypsum-Fiber
Roof
M-OSFA
SBS-CAI,
(Optional) SBS-CAS,
SC-15.
or min. 2,500 psi
EnergyGuard Polyisa
Galvalume Rihbons Plates with OMG
ft
Board orSECKGlass-Mat
Roo
ar M-PGl
SBS-CA2
SBS-CA2structrual
.0•
Insulation, Polytherm H, H-
#14 Roofgrip or Trufast 3" Metal
Board, min.Inch
DEXcell
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Cement Roof
o rd or min. 0.5-Inc
SECUROCK Ce
, it Roof Board
Min. 0.25-Inc ID
ns Deck, Dens De
k
Min. 22 ga., type
Min. 2-inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
Prime, DEXceI IF
Glass Mat Roof
S, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast 014, OMG 3"
3 per
Board, SECUR
b
C Gypsum -Fiber Raof
CK Glass Roo
M-0SFA
SBS-CA3,
(Optional) SBS-CA3,
SBS-CA3,
SBS-CA2,
-45,0
SC-16.
or min. 2,500 psi
EnergyGuard Polylso
Galvalume Ribbons Plates with OMG
1.6ft z
Board or SEC I'1
-Mat
or M•PGl
SBS-CA2
SBS-CA2
structrual
Insulation, Polytherm H, N-
q14 RoofgrlD orTrufast 3" Metal
Board, min. 7 1-Inch
DEXcell
I
APP-CAS
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Cement Roof �o
Ord or min. 0.5-Inc
SECUROCK Ce
nt Roof Board
Min. 22 ga., type
Min. 24nch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam II, ENRGY 3,
7/8) with Dekfast #14, OMG 3"
1 per4
Min. 0.25-Inc
f) ns Deck Prime,
Roof Boarder
OBSOD
5B5-CAS,
(Optional) SBS-CA3,
SBS-CA3,
SBS-CA2,
-30.0•
SC-17,
or min. 2,500 psi
EnergyGuard Polylso
Galvalume Ribbons Plates with OMG
ftz
DEXcell FA GI ss
Matg
SBS-CA2
SBS-CA2
APP-CAS
structrual
Insulation, Polytherm H, H-
014 Roofgrip arTrufast 3" Metal
SECUROCK G ps
m-Fiber Roof Boa
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam 11, ENRGY 3,
7/8) with Dekfast #14, OMG 3"
1 per
Min. 0.25-Inc
i
s ens Deck Prime,
SBS-CA2,
(Optional) SBS-CA3,
SBS-CAS,
SBS-CA2,
-05.0
SC-18.
or min. 2,500 psi
EnergyGuard Polylso
Galvalume Ribbons Plates with OMG
1.6ft z
DEXcell FA GI ss
Matg Roof Board
9
r
OB500
s6s-cAz
sfis-cnz
structrual
Insulation, Polytherm H, H-
q14 Roofgrip arTrufast 3" Metal
SECUROCK G ps'm-Fiber
Roof Board
APP-CAI
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
MIn. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
,
B, Grade 40 steel
ACFoam 11, ENRGY 3,
7/8) with Dekfast 1114, OMG 3"
1 per
Min. 0.25-Inc
ens Deck Prime or
SBS-CA3,
(Optlonal)SBS-CA3,
SBS-CA2,
SC-19.
or min. 2,500 psi
EnergyGuard Polylso
Galvalume Ribbons Plates with OMG
ftz
SECUROCK G
ps
m-Fiber Roof Board
CR-20
SBS-CA2
SBS-CA2
SBS-CA2,
-30.0•
structrual
Insulation, Polytherm H, H-
014 Roofgrip or Trufast 3" Metal
APP CAS
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
Min. 22 ga., type
Min. 2-Inch Polytherm,
Dekfast Hex (aka, Dekfast PLT-H-2-
B, Grade 40 steel
ACFoam 11, ENRGY3,
7/8) with Dekfast 414, OMG 3"
1 per
Min. 0.25-Inc
ens Deck Prime or
SBS-CAS,
(Optional) SBS-CA3,
SBS-CAI,
SBS-CA2,
-45.0
SC-20.
or min. 2,500 psi
EnergyGuard Polylso
Galvalume Ribbons Plates with OMG
1.6 ftz
SECUROCK
p
um-Fiber Roof Bo a
d
CR-20
SBS-CA2
SBS-CA2
APP-CA3
structrual
Insulation, Polythemi H, H-
914 Roofgrip or Trufast 3° Metal
�!
f'
concrete
Shield or Multi -Max FA3
Insulation Plate with Trufast HD
NEMO ETC, LLC
Certificate of Authorization g3245S
Prepared by: Robert Nleminen, PE-59166
6n EDITION (2017) FBC NON-HVH2 EV L ATION
Polyglass Modified Bitumen Roof Systems; 9 4) 233-1330
Evaluation Report P9290.02.08-R21 for FL1654-R23
Revision 21: 10/08/2018
Appendix 1, Page 29 of 65
ONEMOjetc.
TABLE28:
STEEL ORREROOF
JTEAR-OFF) OR
RECOVER
SYSTEVITYPEC: MECHANICALLY
ATTACHED INSULATION,
BONDED ROOF COVER
System
;Top Insulation layer IIICoSe((Note''
Deck (Note 11
No.
Base Insulation Layer'
Tyme-
{{'^
_ _ __ --- .._
....... _
,. S_EIFAnNEPINn.BASE
-il"at.{v;
+:
Dekfast Hex (aka, Dekfast PLT-H-2-7 ✓})
Ith Dekfast #12 D
Min. 22 ga., type B,
(Optional) One or
MIn.1.5-Inch Polytherm,
(steel only) or Dekfast #14, OMG A u
'ac Flat Bottom
SBS-SA,
SC-21.
Grade 33 steel or
more layers, any
ACFoam II, H-Shield or
Plate with#12Roofgrip(steelonly) a
�MG Heavy
1 per
SBS-SA
(Optional) SBS-SA
APP-SA,
-30.0
min. 2,500 psi
combination, loose
Poly[herm
Duty, 3" Metal Insulation Pla e:
r
ith Trufufast #12 D
267 tt'
SBS-TA, APP-TA
SRS-TA,,
structrual concrete
laid
(steel anly)or Trufast #14 HD i
,
APP TA
Min. 22 ga., type B,
(Optional) One or
Dekfast Hex (aka, Dekfast PLT-H-2-7 8)
Nith Dekfast 412 D
Grade 33 steel or
more layers, any
Min.1.5-Inch Polytherm,
(steel only) or Dekfast #14, OMG A u
ac Flat Bottom
3 per
PolyRex SA
SC-22'
min. 2,500 psi
combination, loose
ACFoam II, H-Shield or
Plate with #12 Roofgrip (steel only) r
MG Heavy
2.67 It'
Base
(Optional)APP-TA
APP-TA
-30.0
structrual concrete
laid
Paly[herm
Duty, Trufast 3" Metal Insulation Nail
ith Trufast
ast #12 D
(steel only) or Trufast#14 HD I
Polygrlp #14 or Polygrip H15 with Po yg
Ip Hex Plate or
Min. 22 ga., type B,
(Optional for recover)
MIn.0.25-Inch Dens Deck
Dekfast DF-#14or DF#15 with Dekf it
ez (aka, Dekfast
SBS-SA,
SC-23.
Grade 40 steel or
One or more layers,
POLYBRI optionally primed with
PLTG MG #14 Roofgrip o '
S RoofgripDor with
1per
SBS-SA
(Optional)SBS-SA,
APP-SA,
-37.5 -
min. 2,500 psi
any combination, min.
POLYBRITE 745
745y
3In. Round ate or
OMG 3In. Round Metal Plate or Tru
J HD or TrufastAPP
2.67 It
SBS-TA, APP-TA
SBS-TA,
structrual concrete
1-Inch, loose laid
,s
015 EHD Fasteners with Trufast 3" et
Ilnsulatlon Plate
t Ins
TA
Polygrlp #14 or Polygrlp #15 with Pa yg
p Hex Plate or
Min. 22 ga., type B,
(Optional for remover)
Min. 0.25-Inch Dens Deck
Dekfast DF-#14 or DF#25 with Dekf st
ex (aka, Dekfast
SC-24.
Grade 40 steel or
One or
Prime optionally primed with
PLT-H-2-7/8) or OMG q14 Roofgrip o
N �5 Roa/grip with
leer
SA
(Optional) APP-TA
APP-TA
-37,5•
min. 2,500 psi
combination, min.
any combination, min.
POLYBRITE 745
OMG 3In. Round Metal Plate or Tru
s H14 HD or Trufast
2.67 ft¢
Base
Base
structrual concrete
1-Inch, loose laid
#15 EHD Fasteners with Trufast 3" N ei
I Insulation Plate
Polygrlp #14 or Polygrlp #15 with Po 'g
ip Hex Plate or
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch SECUROCK
Dekfast DF-1114 or DF015 with Dekf st
iex (aka, Dekfast
SBS-SA,
Grade 40 steel or
One or more layers,
Gypsum -Fiber Roof Board
PLT-H-2-7/8) or OMG #14 Roofgrip c
Itrr
5 Roofgrip with
1 per
(Optional) SBS-SA,
APP-SA,
SC-25.
min. 2,500 psi
any combination, min.
optionally primed with
OMG 3In. Round Metal Plate or Ac
c Flat Bottom Plat
2.67 ft°
SBS-SA
SBS-TA, APP-TA
SBS-TA,
-37.5•
structrual concrete
I -inch, loose laid
POLYBRITE 745
orTmfast#14HDorTrufast#15EH
F steners with Trufat
APP-TA
3" Metal Insulation Plate I"
Polygrlp 014 or Polygrlp #15 with Pol lgi
Ip Hex Plate or
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch SECUROCK
Dekfast DF-914 or DF-1115 with Dell si
ex(aka,Dekfast
SC-26.
Grade 40 steel or
One or more layers,
Gypsum -Fiber Roof Board
PLT-H-2-7/8) or OMG #14 Roofgrip o ;p
r 5 Roofgrip with
1 per
Poly#ex SA
(Optional) APP-TA
APP-TA
-37.5 -
min. 2,500 psi
any combination, min.
optionally primed with
OMG 3In. Round Metal Plate or Acc
c Fla[ Bottom Plat
2.67 fN
Base
structrual concrete
1-Inch, loose laid
POLYBRITE 745
It,
or Trufast #14 HD or Trufast#15 EH �F
steners with Trufa
t
3" Metal Insulation Plate Gl,
!_
NEMO ETC, LLC
I
ail
'
�
Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455
6m EDITION (2017) FBC NON-HVHZ EVA
U TION
Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166
Polyglass Modified Bitumen Roof Systems; (5
) 233-1330
Appendix 1, Page 30 of 65
"NEM0 lei -tic.
TABLE2B:
STEEL ORREROOF
(TEAR
-OFF) OR
RECOVER
SYSTEIVITYPEC: MECHANICALLY ATTACHED INSULATION,
BONDED ROOF
COVER
S
` . "Insulatl
on WO er
ystem-
No.
Dehk (Note 1)
:Base Insulation
`
+ Base Ply..,. '+"tag°:Ply 1^u". i s}rCaP Pty r5.(Psft/.4
Types , ..r-:i.
.Att']
ach:
I .f
Polygrip #14 or Polygrip #15 with Po yg
p Hex Plate or
Dekfast DF-1114 or DF-#15 with Dekf st
hex (aka, Dekfast
Min. 22 ga., type B,
(Optional for recover)
PLT-H-2-7/8), Isofast PLT-S-2-3/4X2-
r for Dekfast
SBS-SA,
Grade 40 steel or
One or more layers,
Min. 0.25-Inch DEXcell FA
Galvalume Steel 3" Round (aka, De as;
PLT-R-3) or OMG
1 per
SBS SA
(Optional) SBS-SA,
APP-SA,
-37.5•
SC-2T
min. 2,500 psi
any combination, min.
Glass Mat Roof Board
#14 Roofgrip or #15 Roofgrip with O
3 in. Round Meta
2.67 ft2
SBS-TA; APP-TA
SBS-TA,
structrual concrete
1-Inch, loose laid
Plate or Accutrac Flat Bottom Plate 'r
rufast #14 HD or
APP-TA
Trufast #15 EHD Fasteners with Truf is
3" Metal lnsulatlop
Plate
Polygrip #14 or Polygrip #15 with Po ygHp
Hex Plate or
Dekfast DF-#14 or DF-1115 with Dekf
st Hex (aka, Dekfast
Min. 22 ga., type B,
(Optional for recover)
PLT-H-2-7/8), Isofast PLT-S-2-3/4X2-
/"or Dekfast
Grade 40 steel or
One or more layers,
Min. 0.25-Inch DEXcell FA
Galvalume Steel 3" Round (aka, Dek as
PLT-R-3) or OMG
1 per
Polyflex SA
(Optional) APP-TA
APP-TA
-37.5•
SC-28.
min. 2,500 psi
any combination, min.
Glass Mat Roof Board
014 Roofgrip or#15 Roofgrip with OM
3 in. Round Meta
2.67 ft2
Base
structrual concrete
1-inch, loose laid
Plate or Accutrac Flat Bottom Plate
r rufast#14 HD or
Trufast#15 EHD Fasteners with Tru `
;3" Metal lnsulatid
Plate
Min. 22 ga., type B,
Grade 33 steel or
(Optional) One or
more layers, any
Min. 1.5-Inch H-Shield or
OMG AccuTrac Flat Bottom Plate wi h
only) #14 Heavy Duty, Truf it
12 Roofgrip (steel
"Metal Insulatia
1 per 2
SBS-SA
(Optional) S85-SA,
SBS-SA,
APP-SSBS-TA,
-05.0
SC-29.
min. 2,500 psi
combination, loose
Polytherm
Plate with Trufast #12 DP (steel onl j
hTr
with
rTrufast #14 HD
ft2
SBS•TA, APP-TA
SBS-TA,
structrual concrete
laid
,
APP-TA
Min. 22 ga., type B,
(Optional) One or
I
OMG AccuTrac Flat Bottom Plate with
112 Roofgrip (steel
SC-30.
Grade 33 steel or
more layers, any
Min.1.5-Inch H-Shield or
only) or OMG #14 Heavy Duty, Truf st
3" Metal Insulatior
1 per 2
Polyfiex SA
(Optional) APP-TA
APP-TA
-45.0•
min. 2,500 psi
combination, loose
Polytherm
Plate with Trufast #12 DP (steel cell
(Trufast 014 HD
ft2
Base
structrual concrete
laid
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch Dens Deck
Dekfast Hex (aka, Dekfast PLT-H-2- �[Bhwith
Dekfast#14,
SBS-CA3,
SC-31.
Grade 33 steel or
One more layers,
Prime or SECUROCK
Gypsum -Fiber Roof Board
y
OMG 3" Galvalume Ribbed Plates lw
Platel
111 OMG #14 Roo#14 HD
th Trufast #14 HD
1 per 2
ft2
SBS-SA
None
SBS-CA2,
-05.0•
min. 2,500 psi
o
any combination,
optionally primed with
or Trufast 3" Metal Insulation
APP-CAI
structrual concrete
loose laid
POLYBRITE 745
Fasteners
E
Min. 0.25-Inch Dens Deck
OMG 3 In. Galvalume Plate (non-rlb '
e (with 012 Roofgri'
SBS-SA,
Min. 22 ga., type B,
(Optional for recover)
Prime or SECUROCK
(steel only) or OMG #14 Heavy Out
ekfast Hex lake,
1per 2
(Optional)SBS-SA,
APP-SA,
SC-32.
Grade 33 steel or
One or more layers,
Gypsum -Fiber Roof Board
Dekfast PLT-H-2-7/8)with Dekfast 1
DP(steel only) or
ft2
SBS-SA
SBS-TAor APP-TA
SBS•TAor
il
min. 2,500 psi
any combination,
optionally primed with
Dekfast #14, Trufast 3" Metal lnsul iI
n Plate with Trufa
structrual concrete
loose laid
POLYBRITE 745
#12 DP (steel only) or Trufast #14 H
!
APP-TA
NEMO ETC, LLC Evaluation Report P9290.02A8-1321 for FL3654-RZ3
Certificate of Authorization #32455 a EDITION (2017) FBC NON-HVHZ EV L ATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; i(9 4) 233-1330 Appendix 1, Page 31 of 65
ONEMOletc.
TABLEZB:
STEEL ORREROOF
(TEAR -OFF) OR
RECOVER
SYSTEMTYPEC: MECHANICALLY ATTACHED INSULATION, BONDED ROOF
COVER
System
- •."'TopinsulatioirLayer ll;.n r `°,�"I
vl 5;w.S
'(; "';' Roof-CbverilNote lS)i2,,^ vMtd( �IrMDP
-
No.
Deck (Note 1)
Base Insulation layer
-Type
..._._• _...._Fasten.. ..j(�- .._.. ..
'Attack:.:
Basb.Ply
l
`.'. _:PY
Polygrip H14 with Polygrip Hex Plate I'
r 5 ekfast U14 with
Min, 22 ga., type e,
(Optional for recover)
Min. 0.25-Inch SECUROCK
Dekfast Hex (aka, Dekfast PLT-H-2- P)
;r Dekfast
Grade 40 steel or
One or more layers,
Gypsum -Fiber Roof Board
Galvalume Steel 3" Round (aka, De s
PLT-R-3) or OMG
i.
1per 2
SC-33.
min. 2,500 psi
any combination, min.
optionally primed with
#14 Roofgrip with OMG 3 in. Round
a al Plate, OMG 3 In
c
it?
SOS -SA
None
SBS-SA
-45.0
structrual concrete
1-inch, loose laid
POLYBRITE 745
Ribbed Galvalume Plate (Flat) or Ac tr
or Trufast #14 HD Fasteners with Trua
Flat Bottom Plat
9" Metal
Insulation Plate
1
type B,
Miade
(OptioOneo al formore recover)
Min. 0.25-Inch Dens Deck
Polygrip #14 with Polygrip Hex Plate
Dekfast Hex (aka, Dekfast PLT-H-2-7
r ekfast #14 with
OMG 014
Grade 40 steel or
40 steel
One or more layers,
) r
Sper 2
SC-34.
min. 2,500 psi
any combination, min.
Prime optionally primed with
Roofgrip with OMG 3 In. Round Met 1
P ate or Accutrac FI
t
hs
SBS-SA
None
SBS-SA
-45.05.0
structrual concrete
1-Inch, loose laid
POLYBRITE 745
Bottom Plate or Trufast#14 HD Fast( r
� rs with Trufast 3"
Metal Insulation Plate I
Polygrip #14 or Polygrip #15 with Pol�lgrip
Hex Plate or
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch SECUROCK
Dekfast DF4114 or DF-11I5 with Dekfast
(aka, Dekfast
(Optional when
SBS-SA,
Grade 40 steel or
One or more layers,
Gypsum -Fiber Roof Board
PLT-H-2-7/8) or OMG #14 Roofgrip ofl#
sex
5 Roofgrip with
1 per
using torch -applied
APP-SA,
SC-35.
min. 2,500 psi
any combination, min.
optionally primed with
OMG 3 in. Round Metal Plate or Acc tr
c Flat Bottom Plat
1.78 hz
SBS-SA
Cap Ply) SBS-TA,
SBS-TA or
.45.0
structrual concrete
1-inch, loose laid
POLYBRITE 745
orTrufast#14HDor7rufast#15EH �F
stenerswith Trufat
APP-TA
APP-TA
3" Metal Insulation Plate
i
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch Dens Deck
II
OMG #14 Roofgrip or#15 Roofgrip v/lt
IOMG 31n. Round
(Optional when
SBS-SA,
SC-36.
Grade 40 steel or
One or more layers,
Prime optionally primed with
Metal Plate or Trufast #14 HD or Trupas
flIS EHO Fastener
Iper
SBS-SA
using torch -applied
APP-SA,
-45.0
min.2,500on psi
anycombination,laid, min.
POLYBRITE 745
with Trufast 3" Metal Insulation Platfie�
1.78 fR
Cap Ply)SBS-7A,
SBS-T or
structrual concrete
1-Inch, loose laid
I•
(
APP-TA
APP-TA
Min. 22 ga., type B,
(Optional) One or
Min. 1.5-Inch H-Shleld or
"ith
SBS-SA,
SC-37.
Grade 33 steel or
more layers, any
Polytherm optionally primed
Dekfast Hex (aka, Dekfast PLT-H-2-7/)
Dekfast #12 D
I
3 per 2
SBS-SA
(OptlonaH SBS-SA,
APP-SA,
-60.0
min. 2,500 psi
combination, loose
with POLYBRITE 745
(steel only) or Dekfast #14
ht
SBS-TA, APP-TA
SBS-TA,
structrual concrete
laid
APP-TA
Min. 22 type e,
for recover)
Min. 0.25-Inch Dens Deck
Prime or SECUROCK
OMG 31n. Galvalume Plate (non -ribbed
(steel only) or OMG #14 Heavy Duty,IQ
with #12 Roofgrip
kfast Hex (aka,
Grade 4ga.,
Grade 40 steel or
one(Opor m
One or more layers,
1 per
(Optional) SBS-TA
5B5-TA or
SC-38.
min. 2,500 psi
anycomhination,
Gypsum -Fiber Roof Board
optionally primed with
12
with Dekfast #12
Dekfast PLT, Trufast
DeklaU12D Lsteel
ln4HQ,
P(steelonly)or
Plate with Trufast
1.6It
SBS-SA
or APP•TA
APP-TA
-60.0
structrual concrete
loose laid
POLYBRITE 745
#12 DP (steel only) or Trufast #14 H
only) or Trufast
i
Min. 1.5-Inch ACFoam II,
Dekfast Hex (aka, Dekfast PLT-H-2-7/8)
it Dekfast
ACFoam III, EnergyGuard
Galvalume Steel 3" Round Insulation PI
to (aka, Dekfast
Min. 22 ga., type e,
(Optional) One or
Polylso Insulation, ENRGY 3,
with Dekfast #12 (steel
PLin.
b ;Dekfast 014, OM
.
5B5-SA,
SC-39.
Grade 33 steel or
more layers, any
ENRGY 3 CGF, H-Shield, H-
d) or
3 in. Galvalume Plate (non -ribbed) or
Gal
0 G Acavy Plate
1 per
SBS-SA
(Optional) SBS-SA,
APP-SA,
-67.5 -
min. 2,500 psi
combination, loose
Shield CG, ISO 95+GL, Multi-
with #12 Roofgrip (steel only) or OMG
I4 Heavy Duty or
1.33 hr
SBS-TA, APP-TA
SBS-TA,
structrual concrete
laid
Max or Ultra-
Trufast 3" Metal Insulation Plate with1T
n
ufast #12 DP (steep
APP•TA
nally rim
Max optionally primed with
optionally
only)or Trufast #14 HD
1
l
POLYBRITE 745
NEMO ETC, LUC
Certificate of Authorization 432455
Prepared by: Robert Nieminen, PE-59166
6m EDITION (2017) FBC NON-HVH2 EVALU TION
Polyglass Modified Bitumen Roof Systems; (95�) 233-1330
Evaluation Report P9290,02.08-1121 for FL3654-R23
Revision 22: 10/08/2018
Appendix 1, Page 32 of 65
/Z \
NEMO etc.
-..
TABLE2B: STEEL OR STRUCTURAL CONCRETE CECKS- NEW CONSTWCI._..'1'_'_'.'�
(TEAR -OFF) OR RECOVER
BONDEDSYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION, ROOF
System Top Insulation Layer „Ekkll;n
Deck (Note 1) Base Insulation sayer
^ 1 'RoofCov`er; NESe
'-" '' - ( a"
.Attach Y.
.Base Ply:
"'Ply _
ta p Ply
•�:k(ps4
No.
TYPE Fasten"
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch Dens Deck
OMG 3 in. Galvalume Plate (non -ribbed) with #12 Roofgri
SC-40.
Grade 40 steel or
One or more layers,
Prime or SECUROCK
(steel only) or OMG 414 Heavy Duty, Dekfast Hex (aka,
1 per
(Optional) SBS-TA
SBS-TA or
min. 2,500 psi
any combination,
Gypsum -Ether Roof Board
Dekfast PLT-H-2-7/e) with Dekfast q12 DP (steel only) or
1.33 ft2
SBS-SA
APP-TA
-72.5
structrual concrete
loose laid
optionally primed with
Dekfast #14, Trufast 3" Metal Insulation Plate with Trufast
or
APP-TA
POLYBRITE 745
#12 DP (steel only) or Trufast #14 HD j
Min. 22 ga., type B,
(Optional) One or
SC-41.
Grade 33 steel or
more layers, any
Min. 0.5-inch SECUROCK
OMG 3-Inch Galvalume Steel Plate wlth;OMG #14 HD
1 per
SBS-SA
(Optional) SBS-TA
( )
SBS-TA
min. 2,500 psi
combination, loose
Gypsum -Fiber Roof Board
1.78 ft2
P
-75.0
structrual concrete
laid
Polygrip #14 or Polygrip N15 with Polygrip Hex Plate or
Min. 22 ga., type B,
(Optional for recover)
Min. 0.25-Inch SECUROCK
Dekfast DF-1114 or DF-#15 with Dekfast Hex (aka, Dekfast
SC-42.
Grade 40 steel or
One or more layers,
Gypsum -Fiber Roof Board
PLT-H-2-7/8) or OMG 014 Roofgrip or #15 Roofgrlp with
1 per 1
(Optional) SBS-TA,
SBS-TA,
min. 2,500 psi
any combination, min.
optionally primed with
OMG 3 in. Round Metal Plate or Accutrac Flat Bottom Plat
ft2
SBS-SA
APP TA
APP TA
-90.0
structrual concrete
1-inch, loose laid
POLYBRITE 745
or TmfastH14 HD or Trufast#15 EHD Fasteners with Trufast
3" Metal Insulation Plate
Min. 22 a., type B,
g
(Optional for recover)
Min. 0.25-Inch Dens Deck
Polygrip H14 or Polygrip #15 with Polygrip Hex Plate or
��
Dekfast DF-0t14 or DF-025 with Dekfast Hex (aka, Dekfast
SC-43.
Grade 40 steel or
One'or more layers,
Prime o tionall
P YPrimed with
PLT-H-2-7/8)orOMG qi4 Roofgrip or plS Roofgrip with
1 P er 1
SBS-SA
(Optional) SBS-TA,
SBS-TA,
-97,5
min. 2,500 psi
any combination, min.
POLYBRITE 745
OMG 3 in. Round Metal Plate or Trufast #14 HD or Trufast
It
APP TA
APP TA
structrual concrete
1-Inch, loose laid
015 EHD Fasteners with Trufast 3" Metal Insulation Plate
ASPHALT-0FPl1EUB0.56:.
" -_� - -"•t ,, :. : - -;r r -
x :l. Ln.
52g - .y. Jv r r) ua; °vx ai.la �t 1^i
.-.. ,..uY ..w. .r. ♦ ...
at a z., .-,. rl
n '! .. ✓S+ li YiA YPc. ...i4% I�{cY..AU C'e�E .r4 1? .'f 2�'rz+: Xrzk
Min. 22 a.,
g type B,
Min. 0.75-Inch 1M Fesco
OMG AccuTrac Plate or OMG 3 in. Ribbe{1 Galvalume Plat
(Optional if
(Optional it using
SC-04.
Grade 33 steel or
One or more layers,
any combination,
Board (homogeneous) or
with H12 Roofgrlp (steel only) or OMG #14 Heavy Duty,
Dekfast Hex (aka,Dekfast with Dekfast #12 DP
1 per 2
using AA Ply)
AA Base) BP -AA,
SBS-AA,
min. 2,500 psi
loose laid
min. 1.5-Inch 1M Fesco Board
I
(steel only) or Dekfast Trufast 3"
Trufast 3" Metal Insulation Plate
it 2
BP -AA, SBS-
SBS-AA, SBS-TA or
SBS-TA,
APP-TA
-45.0'
structrual concrete
(laminated)
,
eel
with Trufast DP (steel only)or Trufast q14 HD
�
APP-TA
Min. 22 a., type B,
8 tY
Min. 0.5-Inch Structodek
OMG AccuTrac Plate or OMG 31n. Ribbed Galvalume Plat
1
(Optional if
(P
(Optional if using
SC-05.
Grade 33 steel or
One or more layers,
anycombination,laid tion,
High Density Fiberboard Roof
with #12 Roofgrip (steel only) or OMG #34 Heavy Duty,
DekfastHex (aka, Dekfast, �Wlth Dekfast 012 DP
1 per
using AA Ply)
AA Base) BP -AA,
SBS-AA,
min. 2,500 psi
loose laid
Insulation or G-P FlberBase
-
teel o
(steel only) or Dekfast Trufast
Trufast Insulation Pla a
ft2
BP -AA, SBS-
SBS-AA, SBS-TA or
SBS-TA,
AFP-TA
-45.0•
structrual concrete
HD or HD Excel
eel r dstal
with Trufast q12 DP (steel only) or Trufast 914 HD
AA
APP TA
OMG AccuTrac Plate or OMG 3 in. Ribbed Galvalume Plat
Min. tYP 22 a., a B,
g
33
One or more layers,
Min. 0.25-Inch Dens Deck
with #12 Roofgrip (steel only) or OMG q14 Heavy Duty,
I
(Optional If
(Optional If using
SBS-AA,
TA'
SC-06.
steel or
any combination,
Prime or SECUROCK
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast q12 DP
1 per
using AA Ply)
All Base) BP -AA,
SBS-TA,
-45.0-
min. 2,500
loose laid
Gypsum -Fiber Roof Board
YP
''
(steel only) or Dekfast #14, Trufast 3" N�etal Insulation Plat
ft2
BP -AA, SBS-
SBS-M, 5B5-TAor
qpp-TA
con
structrual concrete
with Trufast #12 DP (steel only) or Trufast #14 HD
AA
APP TA
NEMO ETC, LLC Evaluation Report P9290.02,08-R21 for FL3654-1123
Certificate of Authorization #32455 6" EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2028
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 33 of 65
i
ONEMOjetc.
TABUE213:
STEEL . •REROOF (TEAR -OFF) OR
RECOVER
ATTACHEDSYSTEM TYPE C: MECHANICALLY INSULATION,BONDED RO
System
l ;a ,+Yop;(nfu)at(on;Layerr
-'' - ' "'
No.
Deck (Note 1)
-Base Insulation Layer
Tye
;�Attath'_j
r;'
,.Fasten, ,�„-)! -; .G. „ #,:;
3 Base Ply ?;;
PIYcd` . .
I CaP Ply'
d.;(Psf)
Min. 22 ga., type B,
(Optional) One or
OMG AmuTrac Plate or OMG 31n. Rlbbed;Galvalume Plate
(Optional if
(Optional If using
SC-47.
Grade 33 steel or
more layers, any
Min. 2-Inch H-Shield WF
with 812 Roofgrip (steel only) or OMG 81i4 Heavy Duty,
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast 812 D
1 per
using AA Ply)
AA Base) BP -AA,
SBS-AA,
SBS-TA,
min. 2,500 psi
combination, loose
(steel only) or Dekfast 9
t 3" Metal Insulation Plat
fF
BP -AA, SBS-
SBS-AA, SBS-TA or
APP-TA
-45.0•
structrual concrete
laid
o
with Trufast 912 DP (steel only) or Trufast814 HD
eel only)
AA
APP-TA
i
Min. 22 ga., type B,
(Optional) One or
(Optional If
(Optional if using
Grade 33 steel or
more layers, any
Min. 0.5-Inch SECUROCK
��
1 per
using AA Ply)
AA Base) BP -AA,
SBS-AA,
SC-08.
min. 2,500 psi
combination, loose
Gypsum -Fiber Roof Board
OMG 3-Inch Galvalume Steel Plate with OMG 814 HD
1.78 W
BP -AA, SBS-
SBS-AA, SBS-TA or
SBS-TA,
-75.0
structrual concrete
laid
d
AA
APP-TA
APP-TA
Min. 0.5-Inch Structodek
Min. 22 ga., type B,
Grade 33
One or more layers,
High Density Fiberboard Roof
Insulation 0.25-Inch
it
Dekfast Hex (aka, Dekfast PLT-H-2-7/8) with Dekfast 412
1
(Optional If
AA Ply)
(Optional If using
AA Base) BP
SBS-AA,
SC-09.
steel or
anywmbination,
or min.
(steel only) or R34 or Trufast3"Metal Insulation Plate with
per
using
-AA,
SBS-TA,
-82.5
min.2,500psion
loose laid
Dens Prime
Trufast DP (steel only) or HD i�
1.33ftr
BP-AA, SBS-
SBS-AA, SBS-TA or
APP-TA
structrual concrete
SECUROCK sum
or SECUROCK Gypsum -Fiber
Gypsum -Fiber
AA
APP TA
Roof Board
QptnAPPucn BA$E:,ls, t'+'.�.*.,4 k, urli,
TV'.,^`
�rfihni�ha�r'p M:T.seIi Zr+A."�,`�Fe 1sy$Y.'.Px '1i �.„,#p
Min. 22 ga., type B,
(Optional for recover)
'I'
Grade 33 steel or
One or mare layers,
Min. 0.25-Inch Dens Deck
Dekfast Galvalume Steel Hex with Dekfast
814, 0MG 3"
1 per 2
SBS-CA3, SBS-
(Optional) SBS-CAS,
SBS-CA3,
SC-50.
min. 2,500 psi
any combination,
Prime or SECUROCK
Galvalume Ribbed Plates with OMG #14
RdofGrip or Trufas
W
CA2
SBS CA2
SBS-CA2,
-05.0"
structrual concrete
loose laid
Gypsum -Fiber Roof Board
3" Metal Insulation Plates with Trufast 814
HD Fasteners
APP-CA3
NEMO ETC, LLC I Evaluation Report P9290.02.08-R21 for FL165423
Certificate of Authorization N32455 6m EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954)233-1330 i Appendix 1, Page 34 of 65
i I
System Deck
un. I 1NnM 11
-'.seS2 SI
ea".�, T,no .iacfwn
I
I
I,
I
'cAttanh', '-`.. 'IJ N Base Ph, , d;51iten.Plij;.
etc.
ga.,minty e B
Mln. 22 ga., type B, 40 kst
One or more
Prelim.
Elastoflex 56 (film
18-Inch o.c. within the 4-Inch
(Optional) SBS-SBS-TA
or psi
layers, any
Attached
surfaced)
Trufast #14 HD with Trufast 2" Barbed
Seam Plates
wide,torch-sealed or heat-
TA
-30.0
structrual concrete
combination
I
welded side la
PsTrufast
415 EHD (steel only) or Trufast
#14 HD
fSC-51.steel
(concrete only) with Trufast 2.4" Barbed
Metal Seam
Plates, Trufast 2.4" Scoop Seam Platesor
TrufastMin.
22 ga., type B, Grade
One or more
Prelim.
Polyglass HT Base
2.75" Barbed Metal Seam Plates or Dekfast
'18-Inch
#15 with
o.c. within the 5-Inch40
(Optional) SBS-
steel or min. 2,500 psi
layers, any
Attached
650
Dekfast Galvalume Steel 1-1/2" x 2-3/4"
Oval Barbed
wide, torch -sealed or heat-
TA
SBS-TA
-37.5
structrual concrete
combination
Plate (aka, Dekfast PLT-02-3/4-12B) oq
II Dekfast
welded side laps
Galvalume Steel 2-3/8" Round Barbed
Plate (aka,
Dekfast PLT-R-2-3/8-6B)
I!
Min. 22 ga., type B, Grade
One or more
Prelim.
Elastohase,
Roofgrip #14 with OMG Flat Bottom Plates (square),
Dekfast #14 with Dekfast Hex (aka, Dekfast PLT-H-2-
22-Inch o.c. at min.4-Inch lap
(Optional) BP -
AA, SBS-AA,
SBS-AA, SBS-
SC-53.
33 steel or min. 2,500 psi
layers, any
Attached
Eiastobase P or1M
7/8)or Trufast #14 HD with Trufast 3"'Metal
and 18-Inch o.c. at two, equally
SBS-TA or AP P-
TA, APP-TA
-45.0•
structrual concrete
combination
Perma-Ply 28,
Insulation Plate I.
spaced, staggered center rows
TA
Min. 22 ga., type B, Grade
One or more
Loose
Trufast #12 DP (steel only), #14 HD or
1
#15 EHD with
12-Inch o.c. at min. 4-inch lap
(Optional) SBS-
SBS-CA1, S3S-
SC-54.
33 steel or min. 2,500 psi
layers, any
laid
Elastobase
Trufast 3" Metal Insulation Plate
and 12-inch o.c. at one
CAI, S3S-CA2
CA2, APP-CA3
-45.0•
structrual concrete
combination
staggered center row
Min. 22 ga., type B, 33 ksl
One or more
Trufast #15 EHD (steel only) or Trufast'914 HD
12-Inch o.c. within the 5-Inch
(Optional) SBS-
SC-55.
steel or min. 2,500 psi
layers, any
Prelim.
Elastoflex 56
(concrete only) with Trufast 2.4" Scoop Seam Plates
I wide, torch -sealed or heat-
TA
SBS-TA
-45.0
structrual concrete
combination
Attached
orTrufast 2.75" Barbed Metal Seam Plates
welded side laps
Elastobase,
Elastobase P,
�I
Min. 22 type B, Grade
One or more
Polyglass G2 Base,
Roofgrip 914 with OMG Flat Bottom PIlates�
(square),
12-Inch o.c. at min. 4-Inch lap
(Optional) BP-
SC-56.
ga.,
33 steel or min. 2,500 psi
layers, any
Prelim.
Attached
CertalnTeed
Giasbase, Firestone
Dekfast 414 with Dekfast Hex (aka, Dekfast
7Trufast #14 HD wi[h Trufast 3'lMetal
PLT-H-2-
and 12-Inch o.c. at two, equally
AA, SBS-AA,
SBS-TA or APP-
SBS-AA, SBS-
TA, APP-TA
-52.5
structrual concrete
combination
MB Base, JM Perma-
Insulatsulat ion Plate
spaced, staggered center rows
TA
Ply 28, Tamko Glass
Base or GAFGLAS #75
Min. 22 ga., type B, Grade
One or more
Elastobase or
Roofgrip 014 with OMG Fiat Bottom Plates
I . (square),
12-Inch o.c. at min. 4-Inch lap
SBS-SA, APP-
SC-57.
33 steel or min. 2,500 psi
layers, any
Prelim.
Attached
Elastobase P with
Dekfast #14 with Dekfast Hex (aka, Dekfast
7/8) or Trufast #14 HD with Trufast 3'(IMetal
PLT-H-2-
and 12-inch o.c. at two, equally
SBS-SA
SA, SBS-TA or
-52.5•
structrual concrete
combination
poly top surface
Insulation Plate
spaced, staggered center rows
APP-TA
Min. ga., type B, Grade
One more
Prelim.
Elastobase or
Roofgrip #14 with OMG Flat Bottom
Dekfast #14 with Dekfast Hex (aka, D
fates (square),
�kfast PLT-H-2-
at lap
Polyflex SA
SC-58.
el psi
33 steelor
layers,
s,
Attached
Elastobaserfwith
7/8)orTrufast#14 HD with Trufast 3'IMetal
o.. at two,
and12-Inchgerdtwo,equally
andnch nch
Base
APP-TA
-52,5 *
lmin.2,500
structrual concrete
combination
poly top surface
Insulation Plate
(
spaced, staggered center rows
NEMO ETC, LLC Evaluation Report P9290.02.08-RZ1 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (9514) 233-1330 Appendix 1, Page 35 of 65
i
UN NEMO etc.
TABLE 2C: STEEL ORREROOr
(TEAR -OFF) OR RECOVER
SYSTEMTYPED: INSULATED, MECHANICALLY ATTACHED BASE SHEET, BONDED
ROOF COVER
NOTE: INSULATION IS OPTIONAL FOR RECOVER APPLICATIONS
System beck Insulation layers) t, ,, r 'Base Sheet.ttlr ,, r ,
h 1
i • a r T _ - •�
K :a-�Roo[Cover Note'35 r r
- ( ) SMso
No.
(Note 1),
Type
Attach
-
Type, ,,
r z t t: ,.• I -..Fasten' :3_I(•r)..+r
'.
� ' ' q,,,;Attach„ ..`t:
' .,easePl
;!(P, Ii,
Min. 22 ga., type B, 33 ksl
One or more
Prelim.
Trufast #15 EHD (steel only) or Trufast
I-
14 HD
6-inch o.c. within the 5-Inch
SC-59.
steel or min. 2,500 psi
p
la ers, an
y y
Attached
Elastoflex S6
(concrete only) with Trufast 2.75" Bar
ed Metal Seam
wide, torch -sealed or heat-
(Optional) SBS-
SBS-TA
-60.0
structrual concrete
combination
Plates
welded side laps
TA
Min. 22 ga., type B, Grade
One or more
Prelim.
Trufast 415 EHD (steel only) or Trufast�p14
HD
18-Inch o.c. within the 5-Inch
SC-60.
40 steel or min. 2,500 psi
layers, any
Elastoflex 56 Type II
(concrete only) with Trufast 2.75" Barbed
Metal Seam
wide, torch -sealed or beat-
(Optional)SBS-
-60.0
structrual concrete
combination
Attached
Plates
I"
welded side laps
TA
(D6164
(D6164 only)
Min. 22 ga., type B, Grade
One or more
Prellm.
Elastabase or
Roofgrip #12 (steel only) or #14 with OMG
Fla[AA,SC-61.
12-Inch o.c. at min.4-Inch lap
(Optional) SP-
SBS-AA,
33 steel or min. 2,500 psi
p
la ers, an
y y
Attached
Elastobase P
Bottom Plates (square)
and 12-Inch two, equally
SBS TA orA,
SBS-TA or APP-
TA
TA, APP-TA
-60.0
structrual concrete
combination
ger d
spaced, staggered center rows
TA
Min. 22 ga., type B, Grade
One or more
Prellm.
Elastobase or
Roofgrip p12 (steel only) or g14 with OMG
Flat
12-Inch o.c' at min. 4-Inch lap
SBS-SA, APP-
SC-fi2.
steel psi
layers, any
Attached
Elastobase P with
Bottom Plates (square)
and 12-Inch o.c. at two, equally
SBS-SA
SA, SBS-TA or
-60.0•
structrual l concrete
structrual concrete
combination
poly top surface
I
spaced, staggered center rows
APP-TA
Min. 22 ga., type B, Grade
One or more
Prelim.
Elastobase or
Roofgrip #12 (steel only) or 014 with OMG
Flat
12-Inch o.c. at min. 4-Inch lap
Polyflex SA
SC-63.
33 steel or min. 2,500 psi
layers, any
Attached
Elastobase P with
Bottom Plates (square)
and 12-Inch o.c. at two, equally
Base
APP-TA
-60.0•
structrual concrete
combination
poly top surface
L
spaced, staggered center rows
Min. 22 ga., type S. Grade
33 steel min. 2,500 psi
One or more
layers
Loose
Elastobase
Trufast H12 DP (steel only), p14 HD or
I
a15 EHD with
12-inch o.c. at min. 4lnch lap
and 12-Inch o.c. at two, equally
(Optional) SBS-
SBS-CA1, SBS-
-67.5
structruall concrete
structrual
combination
laid
Trufast 3" Metal Insulation Plate
I
paced, staggered center rows
CAI SBS-CA2
CA2, APP-CA3
(Optional)
Min. 22 ga., type B, Grade
One or more
Loose-
1
Trufast 012 DP (steel only) or Trufast k 4 HD (steel or
-Inch o.c. at min.4lnch lap
Elastoflex 56
SC-65.
40 steel or min. 2,500 psi
layers, any
laid
Elastoflex 56
concrete) with Trufast 3" Metal Insulation Plate
nd 6-Inch o.c. at one
applied in
SBS-CA3
-75.0-
structrual concrete
combination
taggered center row
PG350'at 1.5-
2.0gal/square
(Optional)
Min. 22 ga., type B, 40 ksi
One or more
Prelim.
Trufast P15 EHD (steel only) or Trufast �f14 HD
6-Inch o.c. within the S-Inch
Elastoflex S6
5C-66.
steel or min. 2,500 psi
layers, any
Elastoflex Elastoflez 56 Type II
(concrete only) with Trufast 2.75" Barbed Metal Seam
y✓Ide,torch-sealed or heat-
applied In
SBS-CAI
-82.5"
structrual concrete
combination
Plates
aided side laps
PG3501at1,5-
2.0 gal%square
Min. 22 ga., type B, 33 ksi
One or more
Prelim.
Trufast #15 EHD (steel only) or Trufast #14 HD
2-Inch o.c. within the S-Inch
SC-67.
steel or min. 2,500 psi
layers, any
Elastoflex SS Type II
(concrete only) with Trufast 2.75" BarkedI Metal Seam
ide,torch-sealed or beat-
(Optional) SBS-
SBS-TA
-82.5
structrual concrete
combination
Attached
Plates I
elded side laps
TA
(D6164 only)
i
NEMO ETC, LLC
I
Evaluation Report P9290.02.08-R21 for F1.165423
Certificate of Authorization #32455 6m EDITION (2017) FBC NON-HVHZ EVALUATION
Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9S4) 233-1330
i
Appendix 1, Page 36 of 65
ONEMoleitc.
TABUE2C: STEEL OR STRUCTURAL CONCRETE DECKS- NEW CONSTRUCTION, REROOF (TEAR -OFF) OR RECOVER
SYSTEIVITYPED: INSULATED, MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER
NOTE: INSULATION IS OPTIONAL FOR RECOVER APPLICATIONS'
Deck 'Insulatioh.Ltiyer(s)" +.�;. .tPa !„a.ei Base Sheet ��a� E z i5K_., +
.!Root" An! IN`ote 15)t +I hNMOP jt
System -, ,,.i
No. (Nate 1) Type Attach Type _ ' !Fasten" . r `�--Attach �i L
' .l ... ,.
,c: ,Base P1Y f ` ;tap PlY
Trufa#15 EHD (steel only) or TrufasT#14 HD
rt
(concrete only)with Trufast 2.4" Barbed Metal Seam
Min. 22 ga., type B, 33 ksi
One or more
Prelim.
Polyglass HT Base
Plates, Trufast 2.e Scoop Seam Plates, or Trufart
2.75" Barbed Metal Seam Plates or Dekfast #15 with
12-Inch o.c. within the 5-Inch
'
(Optional) SBS-
SBS-TA
SC-68.
steel or min. 2,500 psi
layers, any
Attached
6S0
Dekfast Galvalume Steel 1-1/2"x2-3/4"oval Barbed
wide
I, torch -sealed or heat-
TA
(D6164 only)
-82.5
structrual concrete
combination
Plate (aka, Dekfast PLT-02-3/4-12B) of Dekfast
I welded side laps
Galvalume Steel 2-3/8" Round Barbed Plate (aka,
i
Dekfast PLT-R-2-3/8-68)
B, Grade Min. 22 g a., t e
type
One or more
Prelim.
Dekfast #15 HS with Dekfast Galvalume
Steel 2-3/e"
� 12-Inch o.c. within the 5-Inch
(Optional) APP-
SBS-TA, APP_
-82.5
SC-69.
80 steel
layers, any
Attached
Polyflex
Round Barbed Plate (aka, Dekfast PLT-ex-2-3/8-68)
wide, torch -sealed side lap
TA
TA
combination
I
Min. 22 ga., type B, Grade
One or more
Prelim.
Trufast 015 EHD (steel only) or Trufas�,W14 HD
h o.c. within the Inch
(Optional) APP-
SBS-TA, APP-
SC-70.
80 steel or min. 2,500 psi
layers, any
Attached
Polybond or Polyflex
(concrete only) with Trufast 2.4 In. Barbed Seam
l
wide, torch -sealed side lap
wide,
TA
7A
-82.5
structrual concrete
combination
Plates
(Optional)
Min. 22 ga., type B, Grade
One or more
Loose-
Trufast #12 DP (steel only) or Trufast 014 HD (steel or
12-Inch o.c. at min. 4-Inch lap
Elastoflex S6
SC-71.
40 steel or min. 2,500 psi
layers, any
laid
Elastefex 56
concrete) with Trufast 3" Metal Insulation Plate
and 12-Inch o.c. at two, equally
9 Y
applied in
SBS-CA3
-90.0•
structrual concrete
combination
I
' spaced, staggered center rows
PG350 at 1.5-
G
2.0 gal/square
Min. 22 ga., type B, 40 ksi
One or more
Trufast #15 EHD (steel only) or Trufast#14 HD
6-Inch o.c. within the 5-Inch
(Optional) SBS-
SRS-TA
SC-72.
steel or min. 2,500 psi
layers, any
Prelim.
Elastoflex 56 Type II
(concrete only) with Trufast 2.75" Barbed Metal Seam
I, wide, [arch -sealed or heat-
TA
(D6164 only)
-97.5
structrual concrete
combination
Attached
Plates I !
welded side laps
Trufast #15 EHD (steel only) or Trufast!#14 HD
(concrete only) with Trufast 2.4" Barb led Metal Seam
Seam Platel�.or Trufast
Min. 22 Be., type B, 40 ksi
One or more
Prelim.
Polyglass HT Base
Plates, Trufast 2.4" Scoop
fi'
Barked Metal Seam Plates or Dekfast#15B with
6-Inch o.c. within the heat-
wide, torch -sealed or heat-
(Optional) 5B5-
A7.5
SC-73.
steel or min. 2,500 psi
layers, any
Attached
650
Dekfast Galvalume Steel l-1/2"x2-3/p"Oval Barked
Dekfast
laps
TA
(D6164
(D6164 only)
structrual concrete
combination
Plate (aka, Dekfast PLT-02-3/4-12B) or Dekfast
welded side
Galvalume Steel 2-3/8" Round BarbedTlate (aka,
Dekfast PLT-R-2-3/8-611) li
12-Inch o.c. at the min. 4-Inch
(Optional) BP -
MIn. 22 ga., type B, Grade
In. M
One or more
Prelim.
Dekfast #14 with Dekfast Hex (aka, Dekfast
PLT-H-2-
lap and 18-Inch o.c. at two,
AA, SBS-AA,
SBS-AA, SBS-
-112.5
steel or min. 2,SD0 psi
layers, any
Attached
Polybond, Polyflex
7/8)or OMG Roofgrip#140MG Flat
Plates
equally spaced, staggered
SBS-TAor APP-
TA, APP-TA
structrual concrete
combination
Bottom
center rows
TA
Min. 22 ga., type B, Grade
One or more
Trufast#15 EHD (steel only) or TrutasiS#14HD
6-Incho.c. within the 5-Inch
(Optional)SBS-
SBS-TA
SC-75.
40 steel or min. 2,500 psi
layers, any
Prelim.
Elastoflex S6 Type II
(concrete only) with Trufast 2.75" Banked Metal Seam
wide, torch -sealed or heat-
TA
(D6164 only)
-135.0
structrual concrete
combination
Attached
Plates li
welded side laps
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-RZ3
Certificate of Authorization #32455 9- EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (95,4) 233-1330 Appendix 1, Page 37 of 65
ONEMOjetc.
TABLE 3A: STRUCTURAL CONCRETE DECKS - NEW CONSTRUCTION OR REROOF (TEAR -OFF)
SYSTEM TYPE A-1: BONDED INSULATION, BONDED ROOF COVER
,. VAPOR BARRIER
System Deck ' _.Base lnsulation'La'Yer'. f ,I ;,.,{ir t ,"_;Top lnsulabo�yer +t 5p'^^' �':o l,r5�h rv'"'.-!'jy.,
Primer -:
No. (Note l)
.. _
Type Attachtde
>
'; i. ,':Type r 1 : ;
°a4 ,as,-,r'Attach,P1 i, . BSse PIV ' a^? ? PIV�.lt''g, ti::
> 5Cap Pty;�' ;` �)
�SEIFADNERINGBASEWITN'BASEINSulAiION ANd UPflarflLLTOP INSb1ADONOFTFIESNi1ETTE r + � �
� a'"i'�t �}
�'� � $ �+C-'"�:(r`F}r�,y�s sb„{ ti .f I ,}'�'y C�+a(
3•+1--s }n
4' -
C-1
Structural
(Optional)
Mln. 1.5-Inch H-Shield or Multi -Max FA3
D-IS
(Optional) additional layers(s)rof
D-IS
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
concrete
PG30o
base Insulation
k
TA, APP-TA
SBS-TA, APP-TA
-67.5
C 2
Structural
(Optional)
Min. 1.5-Inch H-Shleld or Multi -Max FA3
D-IS
(Optional) additional layers(s)
pf
�;
D-IS
PolyFlex SA
(Optional) APP-TA
APP-TA
-67.5
concrete
PG100
base Insulation
Base
Structural
O (Optional) additional la erss
(p ) y ()
Iaf
SBS-SA or
(Optional) SBS-TA,
C-3
concrete
None
MIn.1.5-inch Polytherm H, H-Shield
D-IS
base Insulation
!'
DAS
PolyFlex SA
APP-TA
SBS-TA, APP-TA
-122.5
Base
CA
Structural
(Optional)
Min. 1.5-Inch Polytherm, ACFoam II or ENRGV 3
D-IS
(Optional) additional lavers (s)lof
D-IS
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-135.0
concrete
PG10o
base Insulation
I�.
TA, APP-TA
SBS-TA, APP-TA
Structural
(Optional)
(Optional) additional layers(siof
PolyFlex SA
C-5
concrete
PG100
Min. 3.5-inch Polytherm, ACFoam ll or ENRGY3
Y<
DAS
base Insulation
D-IS
Base
(Optional) AP P-TA
APP-TA
-135.0
Structural
(Optional) additional layers of
base
C-6
concrete
None
Min. 1.5-inch, min. 1.5 pcf Insulfoam
D-IS
Insulation
I'
D-IS
SBS-SA
(Optional) SBS-SA
SBS-SA, APP-SA
-157.5
Structural
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
(Optional) additional layers of,
base
Polyflex SA
C-7
concrete
None
ACFoam III, Polytherm H or H-Shield
D-IS
Insulation
D-IS
Base primed
None
SBS-SA, APP-SA
-170.0
PRIMER: PGI00
with PG100
C 8
Structural
None
Min.1.5-Inch, min. 2.0 cf Insulfoam
p
085GO
(Optional) additional layers oflbase
OB500
SBS-SA
(Optional)SBS-SASBS-SA,
APP-SA
-120.0
concrete
Insulation
SBS-SA or
C 9
Structural
None
Min. 1.5-Inch Polytherm, ACFoam II
OB500
(Optional) additional layers(s)iof
08500
ex SA
(Optional)SBS-TA,
SBS-TA, APP-TA
-122.5
concrete
base Insulation
APP TA
Base
Base
C-10
Structural
None
MIn. 1.5-inch ENRGY3
OB500
(Optional) additional layers(s)iof
OB500
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-127.5
concrete
base Insulation
I
TA, APP-TA
SBS-TA, APP-TA
Structural
additional layers(s)lof
PolyFlex SA
C-11
concrete
None
Min.(Optional)
1.5-Inch ENRGY3
OB500
base insulation
I
OB500
Base
(Optional)APP-TA
APP-TA
-127.5
C-12
Structural
None
Min. 1.5-Inch Polytherm H or H-Shleld
OB500
(Optional) additional layers(s)
of
OB500
SBS-SA
(Optional) SBS-IA, SBS-
SBS-SA, APP-SA,
-150.0
concrete
base Insulation
TA, APP-TA
SBS-TA, APP-TA
Structural
(Optional) additional layers(s)lof
Polyflez SA
C-�
concrete
None
Min. 1.5-inch Polytherm H or H-Shield
OB500
hale insulation
11
OB500
Base
(Optional) APP-TA
APP-TA
-150.0
(Optional) additional layers of�base
PolyFlex SA
C-14
Structural
None
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
OB500
Insulation
OB500
Base primed
None
SBS-SA, APP-SA
-170.0
concrete
ACFoam III, Polytherm H or H-Shleld
PRIMER: PG300
',�
� with PG100
SBS-SA or
C-15
Structural
None
Min. 1:5-Inch Polytherm, ACFoam II, Polytherm
M-OSFA
(Optional) additional Iayers(s)fof
M-05FA or
Polyflex SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-122.5
concrete
G, ACFoam III, Polytherm H, H-Shleld
or M-PG3
base Insulation
II
M-PG3
APP TA
Base
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 6m EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21:10/0812018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 38 of 65
ONEMOletc.
TABUE3A: STRUCTURAL CONCRETE rREROOF (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED INSULATION,BONDED ROOF COVER
System
Deck
..
Base lnsulaklod Layef. NOTE: + { •'` ° ddx�n.Top lnsu A''I'_)ayer i ! Isnt i
nr .'��'. �+ tRaef Cover(Note 35)t,+2 `,.{. °jt hMg7
No.
(Note 1)
Type
Attach';
, wTYPe„ yll,;
Attach. j
F,.Bose Ply 'I
.. Ply;.`
- .':'Cap Ply
(Optional) additional layers of base
Polyflex SA
C-16
StructuralMin.
1-Inch Polythene, ACFoam II, Polythene G,
M-OSFA
insulation
M-OSFAor
Base primed
None
SBS-SA, APP-SA
-170.0
concrete
ACFoam III, Polytherm H or H-Shield
or Ni
M-PG1
FNone
PRIMER: PG100 I
with PG100
StructuralMin.
1.5-Inch Polythene, ACFoam II, ENRGY 3,
(Optional) additional layers(s) of
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C 17
concrete
H-Shield or Multi -Max FA3
M-OSFA
base Insulation
M-OSFA
SBS-SA
TA, APP-TA
SBS-TA, APP-TAC-18
-232.5
Structural
Min. 1.5-Inch Polytherm, ACFoam II, ENRGY 3,
(Optional) additional layers(s) of
Poly0ex SA
concreteH-Shield
or Multi -Max FA3
M-OSFA
base insulation
M-OSFA
Base
(Optional) APP-TA
APP-TA
-232.5
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
I
layers(s)
Structural
None
ACFoam III, EnergyGuard Polyiso Insulation,
M-OSFA
(Optional) additional of
base Insulation, optionally pr�med
M-OSFA or
SBS-SA
None
SBS-CA3, SBS-
-290.0
concrete
concrete
ENRGY 3, ere H, 95+GL,
or M-PGS
with POLYBRITE 745
M-PGl
CA2
FA3, or Ultld,150
Multi -Max FA3, RESISTA or UltraMaz.
I
SBS-SA or
C-20
Structural
None
Min.1.5-Inch Polytherm, ACFoam 11, Pol here
Y<
CR-20
(Optional) additional la ers s of
(P I y (
CR-20
Polyflex SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-222.5
concrete
H, H-Shield
base insulation
APP-TA
Base
(Optional) additional layers of base
Polyflex SA
C-21
Structural
Min. 1-Inch Polytherm, ACFoam 11, Polytherm, G,
CR-20
insulation
CR-20
Base primed
None
SBS-SA, APP-SA
-170.0
concrete
ACFoam ACFoam III, Polythene H or H-Shield
PRIMER: PG300
with PG100
Structural
(Optional) additional layers of base
C 22
concrete
None
MIn.1.5-Inch, min. 2.0 pcf Insulfaam
CR-20
insulation I.
CR-20
SBS-SA
(Optional) SBS-SA
SBS-SA, APP-SA
-240.0
Structural
Min. 2-Inch Polythene, ACFoam II, Polytherm H
OB Classic
f
layers(s)
OB Classic
SBS-SA,
SBS-SA,
C-23
None
(full-
(Optional) additional of
(full-
SBS-SA
(Optional) SBS-
APP-SA,
-270.0
concrete
orH-Shield
coverage)
base Insulation
coverage)
TA, APP-TA
SBS-TA, APP-TA
Structural
Min. 2-Inch Polythene, ACFoam II, Polytherm H
OB Classic
(Optional) additional layers(s) of
OB Classic
Polyflex SA
C 24
concrete
None
or H-Shield
(full-
base Insulation
(full-
Base
(Optional) APP-TA
APP-TA
-270.0
coverage)
coverage)
Structural
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm
Hot
(Optional) additional layers(s) of
Hot
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-25
concrete
PG300
G, ACFoam III, ENRGY 3, Polythene H, H-Shield,
asphalt
base Insulation
asphalt
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-080.0
H-Shleld CG or Multi -Max FA3
Min. 1.5-Inch Polytherm, ACFoam II, Polythene
C-26
Structural
PG300
G, ACFoam III, ENRGY 3, Polytherm H, H-Shield,
Hot
(Optional) additional layers(s) of
Hot
Polyflex SA
(Optional) APP-TA
APP-TA
-080.0
concrete
H-Shield CG or Multi -Max FA3
asphalt
hose Insulation I
asphalt
Base
}
C 27
Structural
None
Min. 1.5-Inch Multi -Max FA3
D-IS
Min. 0.25-Inch Dens Deck Prllme or
D-IS
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-67.5
concrete
SECUROCK Gypsum -Fiber Ropf Board
TA, APP-TA
SBS-TA, APP-TA
Structural
Min. 0.25-Inch SECUROCK Gypsum-
Polyflex SA
C-28
concrete
None
Min. 1.5-Inch Multi -Max FA3
D-IS
Fiber Roof Board -
0-IS
Base
(Optional) APP-TA
APP-TA
-67.5
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-11123
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21:10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9S4) 233-1330 Appendix 1, Page 39 of 65
ONEMID I etc.
TABLE 3A: STRUCTURAL CONCRETE DECKS - NEW CONSTRUCTION REROOF (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED INSULATION, BONDED ROOF COVER
NOTE: FOR VAPOR BARRIER OPTIONS REFER To NOTE IS
InsulBranLayer j;, ?" i ' f Insu[atid', ",)F'h fx�
k °s;",.,,�,r'y, Np�te SSj�Fr
a' "Roof Cover;jPrimer
Mpp =,',
System
Deck'
.7..Base _ . iTnp Itayer
5,f
(Note i)
- - Type'
I Attach
.' K.;. c,TyPe (. ' -r,Attach
t. ?,Base Ply
�_.' -Ply fI_
Structural
Min. 1.5-Inch, min. 2.0 pd Insulfoam, Polytherm,
I
C-29
None
D-IS
MIn. 0.25-Inch Dens Deck Prime
D-IS
SBS-SA
(Optional) SBS-SA SBS-SA, APP-SA
-72.5
concrete
ACFoam It, ENRGY 3, Polytherm H or H-Shield
Structural
Min. 0.25-Inch Dens Deck, Dens Deck
(Optional) SBS-T
C-30
None
Min. 1.5-inch, min. 2.0 pd Insulfoam
D-IS
i,
D-IS
SBS-SA
I,
SBS-TA, APP-TA
-120.0
concrete
prime
APP TA
Structural
Min. 0.25-Inch Dens Deck, Dens Deck
Polyflex SA
C-33
None
Min. 1.5-inch, min. 2.0 pct Insulfoam
D-IS
D-IS
(Optlonal)APP-TA
APP-TA
-120.0
concrete
Prime I
Base
Min. 0.25-Inch Dens Deck Prime,
Structural
Min. 1-Inch Polytherm, ACFoam 11, Polytherm G,
DEXcell FA Glass Mat Roof Baird or
Polyflex SA
C-32
concrete
None
ACFoam III, Polytherm H or H-Shield
D-IS
SECUROCK Gypsum -Fiber Roo ,Board
D-IS
Base primed
None
SBS-SA, APP-SA
-172.5
PRIMER: PG300
with PGI00
I
Structural
Min. 2-Inch Polytherm, ACFoam 11, ENRGY-3,
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-33
concrete
None
Polytherm H or H-Shield
D-IS
Fiber Roof Board I,
D-IS
SBS-5A
TA, APP-TA
SBS-TA, APP-TA
247.5
Min. 0.25-Inch Dens Deck Prime
C 34
Structural
None
(Optional) Polytherm, ACFoam Il,
D-IS
optionally primed with POLYBRITE
D-15
SBS-SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-282.5
concrete
G,Min.
ACFoam
Polytherm G, ACFoam III, Polytherm H, H-Shield
APP-TA
745
Min. 0.25-Inch SECUROCK Gypsum-
Structural
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
Fiber Roof Board optionally Orned
SBS-SA or
(Optional) SBS-TA,
C-35
concrete
None
Polytherm G, ACFoam III, Polytherm H, H-Shleld
D-IS
with POLYBRITE 745 or DEXcell FA
D-IS
Polyflex SA
APP-TA
5B5-TA, APP-TA
-322.5
Glass Mat Roof Board
Base
C-36
Structural
None
Min. 1.5-Inch Polytherm, ACFoam II, ENRGY 3, H-
OBSDO
'I.
MIn. 0.25-Inch Dens Deck Prime
OB500
SBS-SA
(Optional)SBS-SASBS-SA,APP-SA
-72.5
concrete
Shield or 15O 95+GL
Structural
Min. 0.25-Inch Dens Deck, Denss Deck
(Optional) SBS-TA,
C 37
None
MIn.1.5-Inch ENRGY 3
OB500
O8500
SBS-SA
SBS-TA, APP-TA
-127.5
concrete
Prime Y'
APP-TA
C-38
Structural
None
Min. 1.5-Inch ENRGY3
OB500
Min. 0.25-Inch Dens Deck, Dens Deck
OB500
Polyflex SA
(Optlonal)APP-TA
APP-TA
-127.5
concrete
Prime
Base
Structural
Min. 1.5-Inch Polytherm, ACFoam 11, H-Shield or
OB500
Min. 0.25-Inch Dens Deck, Det}s Deck
OBSOO
SBS-SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-150.0
C-39
concrete
None
ISO 95+GL
Prime
APP-TA
Structural
MIn.1.5-Inch Polytherm, ACFoam 11, H-Shleld or
O3500
Min. 0.25-Inch Dens Deck, Deis
Deck
OBSOO
Polyflex SA
(Optional) APP-TA
APP-TA
-150.1)
C-40
concrete
None
15095+GL
1 Prime
Base
Min. 0.25-Inch Dens Deck Prime,
Pal ex SA
C-41
Structural
None
Mtn. 1-Inch Polytherm, ACFoam II, Polytherm G,
OB500
DEXcell FA Glass Mat Roof Board or
OB500
Base Primed
None
SBS-SA, APP-SA
-172.5
concrete
ACFoam III, Polytherm H or H-Shield
SECUROCK Gypsum -Fiber Roo Board
with PG300
PRIMER: PG100
Structural
None
MIn.2-Inch Polytherm, ACFoam II, ENRGY-3,
�OB500
MIn.0.25-Inch SECUROCK Gypsum-
OBSOO
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
247.5
C-42
concrete
Polytherm H or H-Shield
Fiber Roof Board II
TA APP-TA
SBS-TA, APP-TA
C-43
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
OB500
Min. 0.25-Inch Dens Deck Prime
OB500
SBS-SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-282.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shleld
APP-TA
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization 832455 6oh EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954i,233-1330 Appendix 1, Page 40 of 65
"NEM0 etc.
TABLE3A: STRUCTURAL CONCRETE
DECKS -NEW CONSTRUCTION REROOF (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED
INSULATION,BONDED ROOF COVER
System
Deck
,. VAPOR
... -. .. ..T • I
s�Base Insulation Layer i '.
BARRIER OPTIONS REFER To NOTE 18
.,... .II
lop lnsula(lohltayer ,._
y _...i C ilt Y.na 1 v^ "M Y"Ta
-. Roof Cover(Note15) - f t
3Y.`
MDp"F
No.
(Note 1)
Primer
Type
...Attach
; ` �TYPe ...�{'
. a
.Attach
.. Base PIY '; .ire 3 Ply ':. t
, :Cap Ply I +'.
•;(Ps�.ii
Structural
(Optional) Polytherm, ACFoam II,
Min. 0.25-Inch SECUROCK Gypsum-
SBS-SAor
(Optional) SBS-TA,
C-44
None
OB500
Fiber Roof Board or DEXcell FA Glass
OB500
PolyBex SA
SBS-TA, APP-TA
-322.5
concrete
, AQF5-inch
Polytherm G, ACFoam III, Polytherm H, H-Shield
G
Mat Roof Board
Base
APP-TA
C-05
Structural
None
None
Min. 1.5-Inch Polytherm, ACFoam II, ENRGY 3, H-
Min. 0.25-Inch Dens Deck Prime
M-0SFA
SBS-SA
(Optional) SBS-SA
SBS-SA, APP-SA
-72.5
concrete
Shield or Multi -Max FA3
Min. 0.25-Inch Dens Deck Prime,
Polyflex SA
C-06
Structural
None
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
H H-Shield
M-0SFA
M-PGS
DE%cell FA Glass Mat Roof Board or
SECUROCK Gypsum -Fiber Roof Board
M-0SFA or
M-PGl
Base primed
None
SBS-SA, APP-SA
-172.5
concrete
ACFoam III, Polytherm or
or
with PGS00
PRIMER: PG300
C-47
Structural
None
Min. 1.5-Inch Polytherm, ACFoam II, ENRGY 3, H-
M-0SFA
Min. 0.25-Inch SECUROCK Gypsum-
M-0SFA
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-232.5
concrete
Shield or Multi -Max FA3
Fiber Roof Board
TA APP-TA
SBS-TA, APP-TA
Structural
Min. 2-Inch Polythern, ACFoam II, ENRGY-3,
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-0B
concrete
None
Polytherm H or H-Shield
M-0SFA
Fiber Roof Board
M-0SFA
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-247.5
C-09
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
M-0SFA
I
Min. 0.25-Inch Dens Deck Prime
M-0SFA or
SBS-SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-282.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
or M-PG3
M-PG1
APP TA
Min. 0.25-Inch SECUROCK Gypsum-
SBS-SA or
C-50
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
M-0SFA
Fiber Roof Board or DE%cell FA Glass
-0
MSFA or
Polyflex SA
(Optional) SBS-TA,
SBS-TA, APP-TA
-322.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
or M-PGS
Mat Roof Board
M-PGS
Base
APP TA
Min. 1.5-Inch, min. 2.0 pcf Insulfoam, Min. 2-Inch
j
Structural
Polytherm, ACFoam 11, min.1.5-Inch Ultra -Max
Min. 0.25-Inch Dens Deck, Dens Deck
C-51
None
or Multi -Max FA-3, min. 1.3-Inch Polytherm G,
CR-20
prime
CR-20
SBS-SA
(Optional) SBS-SA
SBS-SA, APP-SA
-72.5
concrete
ACFoam III or min. 1.0-inch ISO 95+GL,
Polytherm H, H-Shield, H-Shield CG or ENRGY 3
Min. 0.25-Inch Dens Deck Prime,
C-52
Structural
None
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
CR-20
DEXcell FA Glass Mat Roof Board or
SECUROCK Gypsum -Fiber Roof Board
CR-20
Palyflez SA
Base primed
None
SBS-SA, APP-SA
-172.5
concrete
ACFoam III, Polytherm H or H-Shield
with PG300
PRIMER: PG300
Min. 1.5-Inch, min. 2.0 pcf Insulfoam, Min. 1.5-
Structural
Inch Ultra -Max or Multi -Max FA-3, min. 1.3-Inch
Min. 0.25-Inch Dens Deck, Dens Deck
(Optional) SBS-TA,
C-53
None
Polytherm G, ACFoam III or min. 1.0-Inch ISO
CR-20
Prime
CR-20
SBS-SA
APP TA
SBS-TA, APP-TA
-240.0
concrete
95+GL, Polytherm H, H-Shield, H-Shield CG or
ENRGY 3
Min. 1.5-Inch, min. 2.0 pcf Insulfoam, Min. 1.5-
Structural
Inch Ultra -Max or Multi -Max FA-3, min. 1.3-Inch
MIn.0.25-Inch Dens Deck, Dens
Deck
Polyflex SA
C-54
None
Polytherm G, ACFoam III or min. 1.0-Inch150
CR-20
Prime
CR-20
Base
(Optional) APP-TA
APP-TA
-240.0
concrete
95+GL, Polytherm H, H-Shield, H-Shield CG or
ENRGY3
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 6- EDITION (2017) FBC NON-HVH2 EVALUATION Revision 21:10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 2,33.1330 Appendix 1, Page 41 of 65
ONEMOjetc.
TABLE3A: STRUCTURAL CONCRETE DECKS- NEW CONSTRUCTION OR REROOF (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED INSULATION,BONDED ROO
System
Deck
NOTE: FOR VAPOR BARRIER OPTIONS REFER To NOTE IS
" Base lnsulation.Layer �"' Top lnsulatioh {ayer r•''r+. +
,1-
„• f •. r ''Roof taVer.(Y�Ete 15) F- ..��^ a t,.r�.,�M6R:'J,
No.
(Nate 1)
Primer
Type 'Attach Type 'Attach
( Base Ply Ply, a Cap Ply- 1'(Psfl.
Min. 1.5-Inch Ultra -Max or Multi -Max FA-3, min.
Structural
1.3-Inch Polytherm G, ACFoam III or min. 1.0-
Min. 0.25-Inch SECUROCKGypsum-
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-55
concrete
None
Inch ISO 95+GL, Polytherm H, H-Shleld, H-Shield
CR 20
Fiber Roof Board
CR-20
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-240.0
CG or ENRGY 3
Min. 1.5-Inch Ultra -Max or Multi -Max FA-3, min.
G, ACFoam III 1.0-
Min. 0.25-Inch SECUROCK Gypsum-
PolyRez SA
C-56
Structural
None
1.3-Inch Polytherm or min.
CR-20
CR-20
(Optional) APP-TA
APP-TA
-240.0
concrete
Inch ISO 95+GL, Polytherm H, H-Shield, H-Shield
Fiber Roof Board
Base
CG or ENRGY 3
Structural
Min. 2-Inch Polytherm, ACFoam II, ENRGY-3,
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) SBS-SA; 585-
SBS-SA, APP-SA,
C-57
concrete
None
Polytherm H or H-Shield
CR 20
Fiber Roof Board
CR-20
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-247.5
C-58
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
CR-20
!,
MIn.0.25-Inch Dens Deck Prime
CR-20
SBS-SA
(Optional) SBS-TA,
585-TA, APP-TA
-282.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
APP TA
C-59
Structural
None
(Optional) G, ACF5-Inch Polytherm, ACFoam II,
Polytherm G, ACFoam III, Polytherm H, H-Shield
CR-20
Min. 0.25-Inch SECUROCK Gypsum-
!
Fitter Roof Board or OE%cell FgGlass
CR-20
SBS-SA or
x SA
(Optional) SBS-TA,
APP TA
SBS-TA, APP-TA
-322.5
concrete
Mat Roof Board i
Base
Base
Structural
Min. 2-Inch Polytherm, ACFoam II, Polytherm H
OB Classic
Min. 0.25-Inch SECUROCK Gypsum-
OB Oassic
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-60
None
(full-
(full-
SBS-SA
-350.0
concrete
orH-Shield
coverage)
Fiber Roof Board
coverage)
TA APP-TA
SBS-TA, APP-TA
Structural
Min. 2-Inch Polythene, ACFoam II, Polytherm H
OB Classic
Min. 0.25-Inch SECUROCK Gypsum-
OB Classic
Polyflex SA
C-61
concrete
None
or H-Shleld
(full-
Fiber Roof Board
(full _
Base
(Optional) APP-TA
APP-TA
-350.0
coverage)
�
coverage)
Structural
Min. 1.5-Inch Polytherm, ACFoam I1, Polytherm
Hot
I
Min. 0.25-Inch SECUROCK Gypsum-
Hot
I
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
C-62
concrete
PGS00
G, ACFoam III, ENRGY 3, Polytherm H, H-Shleld,
asphalt
Fiber Roof Board
asphalt
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-350.0
H-Shield CG or Multi -Max FA3
(
Min. 1.5-inch Polytherm, ACFoam II, Polytherm
Hot
Min. Inch SECUROCK Gypsum-
Hot
xSA
C-63
Structural
concrete
PG100
G, ACFoam III, ENRGY 3, Polytherm H, H-Shleld,
asphalt
Fiber RoofRoof Board
asphalt
Base
Base
(Optional) APP-TA
APP-TA
-350.0
H-Shield CG or Multi -Max FA3
.. ASPHALT ,v- '
' OR TORCNAPPLIEO BASE , � I .('. ,
�
"y � U. �, )i;.t}k t , 1� •k G.
Structural
Min. 2-inch Polytherm, ACFoam II, Polytherm H
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) EINAA, SBS-
C-64
concrete
None
or H-Shield
D IS
Fiber Roof Board
O-IS
BP -AA, SBS-AA
AA
SBS-AA
-225.0
C-65
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
D-IS
Min. 0.25-Inch Dens Deck Prime
D-IS
SBS-TA, APP-TA
(Optional) SBS-TA,
SBS-TA, APP-TA
-282.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
I
APP-TA
Min. 0.25-Inch SECUROCK Gypsum -
C-66
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
D-15
Fiber Roof Board or DEXcell FA Glass
D-IS
SBS-TA, APP-TA
(Optional) SBS-TA,
SBS-TA, APP-TA
-322.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shleld
Mat Roof Board
APP TA
Structural
Min. 2-Inch Polytherm, ACFoam II, Polytherm H
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) BP -AA, SBS-
C-67
concrete
None
or H-Shield
OB500
Fiber Roof Board
OB500
BP -AA , SBS-AA
AA
SBS-AA
-225.0
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL16aR23
Certificate of Authorization 832455 6- EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954);233-1330 Appendix 1, Page 42 of 65
ONEM.'
etc.
TABLE3A: STRUCTURAL CONCRETE
r CONSTRUCTION ..
SYSTEM TYPE A-1: BONDED
INSULATION, BONDED ROOF COVER
System
,Deck
Primer
NOTE: FOR VAPOR
- 'Base Insulation Layer
BARRIER OPTIONS REFERTo NOTE 18
-_ Topinsulatio `iL'ayer S-,gJ1^kw ''i
1+' v_ ' �yRoof Cover (Note lSj �+ r .gia Sf+
J'lN'fpp;
No.
(hare zl
,Type
,Attach
' ^:Type -' ;'
Attach-;
Base Piy
Piy," aap Piy {;?(Psf)„
Structural
(Optional) Min. 3.5-Inch Polytherm, ACFoam II,
(Optional) SBS-TA,
C-68
concrete
None
Polytherm G, ACFoam III, Polytherm H, H-Shield
OB500
Min. 0.25-Inch Dens Deck Prime
I
OB500
SBS-TA, APP-TA
APP-TA
SBS-TA, APP-TA
-282.5
Min. 0.25-Inch SECUROCK Gypsum -
C-69
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam 11,
OB500
Fiber Roof Board or DEXcell FA Glass
OBS00
SBS-TA, APP-TA
(Optional) SBS-TA,
SBS-TA, APP-TA
-322.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shleld
Mat Roof Board
APP TA
Structural
Min. 2-Inch Polytherm, ACFoam II, Polytherm H
M-OSFA
Min. 0.25-Inch SECUROCK Gypsum-
M-OSFA or
(Optional) BP -AA, SBS-
C70
concrete
None
orH-Shleld
orM-PG3
Fiber Roof Board I
M-PG3
BP -AA, SBS-AA
AA
SBS-AA
-225.0
Structural
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
M-OSFA
M-OSFA or
(Optional) SBS-TA,
C-71
concrete
None
Polytherm G, ACFoam III, Polytherm H, H-Shield
or M-PG3
Min. 0.25-Inch Dens Deck Prime
I
M-PG3
SBS-TA, APP-TA
APP-TA
SB5-TA, APP-TA
-282.5
Min. 0.25-Inch SECUROCK Gypsum -
C 72
Structural
None
(Optional) Min. 1.5-Inch Polytherm, ACFoam II,
M-OSFA
Fiber Roof Board or DEXcell FA Glass
M-OSFA or
SBS-TA, APP-TA
(Optional) SBS-TA,
SBS-TA, APP-TA
-322.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
or M-PG3
Mat Roof Board �
M-PG3
APP TA
Min. 1.5-Inch Ultra -Max or Multi -Max FA-3, min.
Structural
1.3-inch Polytherm G, ACFoam III or min. 1.0-
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) BP -AA, SBS-
C-73
concrete
None
inch ISO 95+GL, Polytherm H, H-Shield, H-Shield
CR 20
Fiber Roof Board
CR-20
BP -AA, SBS-AA
AA
SBS-AA
-225.0
CG or ENRGY 3
Min. 1.5-Inch Ultra -Max or Multi -Max FA-3, min.
Structural
1.3-Inch Polytherm G, ACFoam III or min. 1.0-
Min. 0.25-Inch SECUROCK Gypsum-
C-74
concrete
None
Inch ISO 95+GL, Polytherm H, H-Shield, H-Shield
CR 20
Fiber Roof Board
CR-20
APP-TA
(Optional) APP-TA
APP-TA
-232.5
CG or ENRGV 3
C 75
Structural
None
(Optional) Min..1.5-Inch Polytherm, ACFoam 11,
CR-20
min. 0Z5-Inch Dens Deck Prime
CR-20
SBS-TA, APP-TA
(Optional) SBS-TA,
SBS-TA, APP-TA
-282.5
concrete
Polytherm G, ACFoam III, Polytherm H, H-Shield
I
APP-TA
Structural
(Optional) -Inch Polytherm, ACFoam II,
Min. 0.25-Inch SECUROCK Gypsum-
(Optional) SBS-TA,
C 76
None
CR-20
Fiber Roof Board or DEXcell FA Glass
CR-20
SBS-TA, APP-TA
SBS-TA, APP-TA
-322.5
concrete
Polytherm G, G, ACFoam III, Polytherm H, H-Shield
Mat Roof Board
APP TA
Structural
(Optional) Min. 2-Inch Polytherm, ACFoam 11,
OR Classic
Min. 0.25-Inch SECUROCK Gypsum-
OB Classic
(Optional) BP -AA, SBS-
C-77
concrete
None
Polytherm H or H-Shield
(full-
Fiber Roof Board
(full-
BP -AA, SBS-AA
AA
SBS-AA
-225.0
coverage)
coverage)
78
Structural
None
(Optional) Min. 2-Inch Polytherm, ACFoam II,
OR Classic
(full-
MIn. 0.25-Inch SECUROCK Gypsum-
OR Classic
(full-
APP-TA
(Optional) APP-TA
APP-TA
-232.5
C
concrete
Polytherm H or H-Shleld
coverage)
Fiber Roof Board
i
coverage)
Structural
Min. 1.5-Inch Polytherm, ACFoam 11, Polytherm
Hot
Min. Inch SECUROCK Gypsum-
Hot
(Optional) BP -AA, SBS-
C-79
concrete
P6300
G, ACFoam III, ENRGV 3, Polytherm H, H-Shield,
asphalt
Fiber RoofRoof Board �
asphalt
BP -AA, SBS-AA
AASBS-AA
-225.0
H-Shleld CG or Multi -Max FA3
Structural
Min. 1.5-Inch Polytherm, ACFoam 11, Polytherm
I
Min. SECUROCK Gypsum-
Hot
C-80
PG300
G, ACFoam III, ENRGV 3, Polytherm H, H-Shield,
asp
asphalt
Fiber Roof Board
Roof
asphalt
APP-TA
(Optional) APP-TA
APP-TA
-232.5
concrete
H-Shield CG or Multi -Max FA3
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 6- EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233-1330 Appendix 1, Page 43 of 65
ONEMOletc.
TABLE 3A: STRUCTURAL CONCRETE
DECKS— NEW CONSTRUCTION OR .. (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED
INSULATION,BONDED ROOF COVER
System
Deck
FOR VAPOR
- .Base lnsulatlim Layer hj,
BARRIERNOTE: OPTIONS
No.
(Note 11
Primer
Type
""Attach
_ Type i•.
-Attachr
5 `"Bas`e.Ply '' Ply;`
Cap Ply
E`:(Psf)=-
Structural
Ho[
(Optlonal if
(Optional If using AA
SBS-AA, SBS-TA,
C-81
PGI00
Min. 0.75-inch Fesco Board (homogeneous)
asphalt
None
N/A
using AA Ply)
Base) BP -AA,
APP TA
-277.5
concrete
-
BP -AA, SBS-AA
-TA
SBS-TA or APP-TA
Structural
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm
Hot
Fesco Board
Hat
(Optional if
(Optional if using AA
A, SBS-TA,
C 82
concrete
PG300
G, ACFoam III, Polytherm H, H-Shield,
asphalt
enInch
(homogeneous)
(homogeneous) I
asphalt
using Ply)
Base) BP -AA, SBS-AA,
APP TA
APP-
-290.0
H-Shield CG or Multi-Maz FA3
MuRT-Max
, S
BP -AA, SBS-AA
SBS-TA or APP-TA
Structural
Min. 0.5-Inch Structadak High Density
Hot
I
None
N/A
(Optional if
using Ply)
(Optional if using AA
Base) BP -AA,
SBS-AA, SBS-TA,
-285.0
C-83
concrete
PG300
Fiberboard Roof Insulation
asphalt
I
BP -AA, S, S -AA
SBS-TA or APP-TA-TA ,
APP TA
Structural
MIn. 1.5-Inch Polytherm, ACFoam II, Polytherm
Hot
MIn. 0.5-Inch Structodek High l
Hot
(Optional if
(Optional If using AA
SBS-AA, SBS-TA,
C-84
concrete
PG300
G, ACFoam III, ENRGY 3, Polytherm H, H-Shield,
asphalt
Density Fiberboard Roof Insulation
asphalt
using AA Ply)
Base) BP -AA, SBS-AA,
APP TA
-480.0
H-Shield CG or Multi -Max FA3
BP -AA, SBS-AA
SBS-TA or APP-TA
Structural
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm
Hot
Hot
(Optional if
(Optional If using AA
SB5-AA, SBS-TA,
C-85
PG100
G, ACFoam III, ENRGY 3, Polytherm H, H-Shield,
asphalt
Min. 0.25-Inch Dens Deck Prime
asphalt
using AA Ply)
Base) BP -AA, 585-AA,
App Tq
-480.0
concrete
H-Shield CG or Multi -Max FA3
BP -AA SBS-AA
SBS-TA or APP-TA
Structural
Hot
(Optional if
(Optional if using AA
SBS-AA, SBS-TA,
C-86
PG100
Min. 0.25-Inch Dens Deck Prime
asphalt
None
N/A
using AA Ply)
Base) BP -AA, SBS-AA,
APP TA
-510.0
concrete
BP -AA, SBS-AA
SBS-TAor APP-TA
CPtD-APPDEb BASE:.:; ,,. rl '4t .,z n :,�v;.�r. r•. FY.r {:.+(�. , r.li t .:'+i..r..�{iA"frt. t, in�f:Ai r...re,�
. -
C five �.e
Z rw-hn'i, :: �J!,i#�4 Ywt�1n
Min. 0.25-Inch Dens Deck Prie,
ni
Structural
None
Min. 1-inch Polytherm, ACFoam IH G,
D-IS
DEKcell FA Glass Mat Roof Board
or
D-IS
SBS-CA3, SBS-
(Optional) SBS-CA3,
SBS-CAP, SBS-
-120.0
C-87
concrete
P or H-Shield
ACFoam III, ENRGY 3, Polytherm H or H-Shield
SECUROCK Gypsum -Fiber Roof
Board
CA2
SBS-CA2
CA2, APP-CA3
Structural
MIn. 1-Inch Polytherm, ACFoam II, Polytherm G,
D-IS
Min. 0.25-Inch Dens Deck Pri
a or
D-IS
SBS-CAl
—None
SBS-CA1, SBS-
-127.5
C-88
concrete
None
ACFoam III, Polytherm H or H-Shield
DEXceII FA Glass Mat Roof Board
CA2 APP CA1
Structural
Min. 1-Inch Polytherm, ACFoam 11, Polytherm G,
Min. 0.25-Inch SECUROCK Gypsum-
D-IS
SBS-CAI, SBS-
None
SBS-CAS,SBS-
-127.5
C-89
concrete
None
ACFoam III, Polytherm H or H-Shleld
D IS
Fiber Roof Board
CA2
CAZ APP-CA1
C-90
Structural
None
Min. 1-inch ENRGY 3, Polytherm H or H-Shield
D-I5
Min. 0.25-Inch Dens Deck Prime or
DAS
SBS-CA1, SBS-
None
SBS-CA3, SBS-
-232.5
concrete
SECUROCK Gypsum -Fiber Roof Board
CA2
CA2
Min. 0.25-Inch Dens Deck, Dens Deck
Min. 1-inch Polytherm, ACFoam 11, Polytherm G,
Prime, DEXceII FA Glass Mat Roof
Structural
ACFoam III, EnergyGuard Polyiso Insulation,
M-OSFA,
Board, SECUROCK Gypsum -Fill
t �
M-OSFA or
SBS-CAI, SBS-
-CA3,
SBS-CA1,SBS_
-120.0
C-91
None
ENRGY 3, Polytherm H, H-Shleld IS095+GL,
M-PG3
Roof Board or SECUROCK Glas •Mat
M-PG3
CA2
i
SEIS-CA2
SBS-CA2
CA2, APP-CA3
concrete
•Multi -Max FA3, RESISTA or UltraMax or min. 2-
Roof Board, min. 7/16-Inch DEXceII
Inch DECKMATE Plus or DECKMATE Plus FA
Cement Roof Board or min. 0.5-Inch
SECUROCK Cement Roof Board
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 44 of 65
NNEMOjetc.
TABLE 3A: STRUCTURAL CONCRETE
DECKS — NEW CONSTRUCTION OR REROOF (TEAR
-OFF)
SYSTEM TYPE A-1: BONDED
INSULATION, BONDED ROOF COVER
System
Deck
NOTE: FOR VAPOR
..
Base Insulation Layer
BARRIER OPTIONS REFER To TE IS
„.,'
., ... ''.Top Insulitlomlayer _ 4'
^'�Roef Cove�(Note 35) s "i,•IMpp,'•
No.
(Note L)
Primer
Type
Attach
Typei .-
Attach
,Base Ply
..Ply - �Eap PI
,,(psi),'
Min. 1-Inch Polytherm or ACFoam 11, Polytherm
Min. 0.25-Inch Dens Deck Prime or
G, ACFoam III, EnergyGuard Polyiso Insulation,
DEXcell FA Glass Mat Roof Board,
C-92
Structural
None
ENRGY 3, Polytherm H, ld, I50 GL,min.
M-OSFA,
Inch DEXcell Cement Roof
M-OSFA,
SBS-CA1
None
SBS-CA1,SB5-
-127.5
concrete
or Ul or
Multi -Max FA3, RESISTA or UltraMax or min. 2-
M-PGS
Board or min.0.5-inch SECUROCK
Board r
M-PG3
CA2 APP CAI
Inch DECKMATE Plus or DECKMATE Plus FA
Cement Roof Board
Min. 1-inch Polytherm or ACFoam 11, Polytherm
Structural
G, ACFoam III, EnergyGuard Polylso Insulation,
M-OSFA,
Min. 0.25-Inch SECUROCK Gypsum-
M-OSFA,
SBS-CA1,SB5-
SBSCAI,SBS-
C 93
concrete
None
ENRGY 3, Polytherm H, ld, 150 GL,min.
M-PG3
Fiber Roof Board
M-PG3
CA2
None
CA2 APP CA1
-127.5
or Ul or
Multi -Max FA3, RESISTA or UltraMax or min. 2-
Inch DECKMATE Plus or DECKMATE Plus FA
Min. 0.25-Inch Dens Deck, Dens Deck
Min. 1-Inch Polytherm or ACFoam II, Polytherm
Prime, DEXcell FA Glass Mat Roof
G, ACFoam III, EnergyGuard Polyiso Insulation,
Board, SECUROCK Gypsum -Fiber
C 94
Structural
None
ENRGY3, Polytherm H, H-r , I50
M-OSFA,
Roof Board or SECUROCK Glass -Ma[
M-OSFA,
SBS-CAI, SBS-
None
SB5-CAI,SBS-
-232.5
concrete
Ultr or in.
Multi -Max FA3, RESISTA or UltraMax or min. 2-
M-PG1
Roof Board, min. 7/16-Inch DI cell
M-PG1
CA2
CA2
Inch DECKMATE Plus or DECKMATE Plus FA
Cement Roof Board or min. 0.5-Inch
SECUROCK Cement Roof Board
Structural
Min. 1-Inch Polytherm, ACFoam 11, Polytherm G,
Min. 0.25-Inch Dens Deck Prime,
SBS-CAI, SBS-
(Optional) SBS-CAI,
SBS-CA1,SB5-
C 95
concrete
None
ACFoam III, ENRGY 3, Polytherm H, H-Shield or
OB500
DEXcell FA Glass Mat Roof Board or
OB500
CA2
SBS-CA2
CA2, APP-CAI
-120.0
Multi -Max FA3
SECUROCK Gypsum -Fiber Roof Board
Structural
Min. 1-Inch Polytherm, ACFoam 11, Polytherm G,
Min. 0.25-Inch Dens Deck Prime or
SBS-CAI, SBS-
concrete
None
ACFoam III, ENRGY3, Polytherm H, H-Shield or
OB500
DEXcell FA Glass Mat Roof Board
OB500
SBS-CAS
None
CA2
CA2 APP CAI
-127.5
Multi -Max FA3
Structural
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
Mtn. Inch SECUROCK Gypsum-
SBS-CAI, SBS-
SBS-CAI, SBS-
concrete concrete
None
ACFoam III, ENRGY 3, Polytherm H, H-Shield or
03500
Roof
Fiber Roof Board
OB500
CA2
None
CA2,
CA2 APP CAS
-127.5
Multi -Max FA3
Structural
Min. 1-Inch Polytherm, ACFoam II, ENRGY 3 or
Min. i
25-Inch Dens Deck Prime, 0.
SBS-CA3, SBS-
SBS-CAI, 565-
C-98
concrete
None
Multi -Max FA3
OB500
DEXcell FA Glass Mat Roof Board or
OB500
CA2
None
CA2
-2325
SECUROCK Gypsum -Fiber Roof Board
Structural
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
Min. inch Dens Deck Prime or
SBS-CA3, SBS-
(Optional) SBS-CA3,
SBS-CAP, SBS-
C-99
concrete
None
ACFoam III, ENRGY 3, Polytherm H, H-Shield or
CR-20
SECUROCK Gypsum -Fiber Roof Board
CR-20
CA2
SBS-CA2
CA2, APP-CAS
-120.0
Multi -Max FA3
I
Min. 1-Inch Polytherm, ACFoam 11, Polytherm G,
Dens Deck Prime
SBS-CAP, SBS-
C-100
Structural
None
ACFoam III, ENRGY 3, Polytherm H, H-Shield or
CR-20
Min. or
i
DEXcellell FA FA Glass Mat Roof Board
CR-20
SBS-CA3
None
CA2, APP-CA3
-127.5
concrete
Multi -Max FA3
i
Structural
Min. 1-Inch Polytherm, ACFoam II, Polytherm G,
Min. 0.25-Inch SECUROCK Gypsum-
SBS-CAI, SBS-
SBS,
C -101
concrete
None
ACFoam III, ENRGY 3, Polytherm H, H-Shield or
CR-20
Fiber Roof Board
CR-20
CA2
None
APP- Al
CA2 APP CAl
-127.5
Multi -Max FA3
-
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654-R23
Certificate of Authorization #32455 6^' EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 45 of 65
ONEMOIetc.
System Deck
sasemsuiaTumwyer,.
'n '4 n
Primer
�;,
�t-- , ry
tt -h
v
Note 1)
No. , (Note
Type
Attach
�,,l " 'f,"r
Structural
Mln. 1-Inch ENRGY 3, Polytherm H, H-Shield,
Min. 0.25-inch Dens Deck Prime or
SBS-CA1, SBS-
None
SBS-CA1, SBS-
2A2.5
C-102
concrete
None
Multi -Max FA3
CR-20
SECUROCK Gypsum -Fiber Roof Board
CR-20
CA2
I
CA2
i
TABLE 3B: STRUCTURAL CONCRETE DECKS — NEW CONSTRUCTION OR REROOF (TEAR -OFF)
SYSTEM TYPE F: NON-1 NSULATED, BON DED BASE SH EET, BON DED ROOF COVER
. -- 7. , -, � "'., , I ,, 1, %,�Lbj 'id' I
System Deck`.�,.
Primer
No. (Note 1) Base Ply
C-103 Structural concrete
None
SBS-CA1
None
SBS-CAI, SBS-CA2, APP-CA1
-105.0
C-104 Structural concrete PG100
Polyflex SA Base primed with PG100
None
SBS-SA, APP-SA
-117.5
C-105 Structural concrete PGIOO
SBS-SA
(Optional)SBS-SA, SBS-TA, APP-TA
SBS-SA, APP-SA, SBS-TA, APP-TA
-315.0
C-106 Structural concrete PG100
Polyflex SA Base
(Optional) APP-TA
APP-TA
-315.0
C-107 Structural concrete PG100
(Optional) SBS-TA
(Optional) SBS-TA
SBS-TA
-495.0
(Optional if using asph6it applied Base) BP -AA, SBS-
C-108 Structural concrete PG100
BP -AA (Optional if using asphalt applied Ply)
I
I AA SSS-TA or APP-TA 1
SBS-AA, SBS-TA, APP-TA
-622.5
1
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FLI654-11123
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nlemlnen, PE-59166 Polyglass Modified Bitumen Roof Systems; (9541233-1330 Appendix 1, Page 46 of 65
System Dick
No. (Note 1)
14)
ON enno I etc.
LWC-1
Structural
Min. 20D psi, min. 2-Inch
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
CR-20
(00onal) Additional
CR-20
SBS-SA
(Optional)SBS-
SBS-SA,APP-
-222.5
concrete
Celcore Cellular Concrete
layers of base Insulation
SA
SA
Structural
Min. 200 psi, min. 2-Inch
Min. 1.5-Inch Polytherm, ACFoam II, Polythene G,
ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
(Op Zonal) Additional
I
CR-20
SBS-SA
(Optional) SBS-
SA, SBS-TA, APP-
SBS-SA, APP-
SA, SBS-TA,
-222.5
LWC-2
concrete
Celcore Cellular Concrete
Shield, H-Shield CG, Multi -Max FA3
layers of base Insulation
TA
APP TA
Structural
Min. 200 psi, min. 2-Inch
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm G,
(Optional) Additional
CR-20
PolyBex SA
(Optional) APP-
APP-TA
-222.5
LWC-3
Cellular Concrete
ACFoam III, ENRGY 3, I50 95+GL, Polytherm H, H-
CR-20
lay lrs of hase insulation
Base
TA
concrete
Celcore
Shield, H-Shield CG, Multi -Max FA3
Min. 1.5-inch Polytherm, ACFoam Il, Polytherm G,
(Optional) SBS-
SBS-SA, APP-
Structural
Min. 200 psi, min. 2-Inch
ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, W
CR-20
ECUR.25-Inch
SECGypsum-
CR-20
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-222.5
LWC-0
concrete
Celcore Cellular Concrete
Shield, H-Shield CG, Multi -Max FA3 or min. 2.0 pcf
Roof Board
Fiber Roof
TA
APP-TA
Insulfoam
I
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm G,
i
MI
Structural Min. 200 psi, min. 2-Inch ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
iu+lri�r'SwPi�}°.3
R .0.25-Inch
Gypsum-
SECer
ez SA (Optional) APP-
CR-20 APP-TA -222.5
LWC-5
concrete Celcore Cellular Concrete Shield, H-Shield CG, Multi -Max FA3 or min. 2.0 pcf
Fiber Roof Board
Roof
BasePolyf
Base TA
Insulfoam
i, ASPXALTORTUnCXA�Pl1ED
hh
B0.5FPLY ...�, `fit " Nv .�4� a.Y 1,3 ++±'i}.z:>"±k.1,�'Arv'Et, e3r?4�en#";tnt
ii.uR:,.kn7 4,s
�sn tie!
'if'P,^.'..'.K.+i^`5i+"'=ii,e,P':fv�a'.`ifn+x`',.±'•
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm G,
MI 'ROC -Inch
(Optional) BP-
Structural
Min. 200 psi, min. 2-Inch
ACFoam III,. ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
SEC Gypsum-
CR-20
BP -AA, SBS-
AA, SBS-AA, SBS-
SBS-AA, SBS-
-222.5
I�.w-"z'
LWC-6
concrete
Celcore Cellular Concrete
Shield, H-Shield CG, Multi -Max FA3 or min. 2.0 pcf
Fiber Roof Board
Roof
APP TA
TA or APP-TA
TA APP TA
Insulfoam
.. .... ..,. ± ri
IEvSnzELL (FIr1994) . fT: ni
¢ fits
�„'�a���.°
w u-✓
n v, k..;.t 'Yk,. adi
� ± `'
V•.3m�4. IlY�h dncsn4t
( O Itional) Additional
y,
• u.- ,;, v : t „}'
PLY
iY-6$ELFtADXERING �ASE ^ �'� w � , . 4Yt � t
L,:(aa, ,
i + y I
x n F i nod � j { t • 3
J,}{�`dvr ,Mk.
'n
��.�
HAMF+4; i•,i ukfw`-v �i'�'h fS +�" N
, o.�.,
(Optional) SBS- SBS-SA, APP-
Min. 200 psi, min 2-Inch
LWC 7
Structural
Range II Elastizell Lightweight
�•
MIn. 1.5-Inch, min. 2.0 pcf Insulfoam
OB500
P
layers of base Insulation
OB500
SBS-SA -120.0
SA SA
concrete
Insulating Concrete.
I
Min. 200 psi, min 2-Inch
Min. 0.25-Inch
(Optional) SBS-
SBS-SA, APP-
LWC-B
Structural
Range II Elastizell Lightweight
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
OB500
SECUROCK Gypsum-
OB500
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-120.0
concrete
Insulating Concrete.
Fiber Roof Board
TA
APP-TA
Min. 200 psi, min 2-Inch
Min. 0.25-Inch
Polyflex SA
(Optional) APP-
LWC-9
Structural
Range II Elastizell Lightweight
MIn. 1.5-Inch, min. 2.0 pcf Insulfoam
OB500
5Et(UROCK Gypsum-
OBSDD
Base
TA
APP-TA
-120.0
concrete
Insulating Concrete.
Fibler Roof Board
Structural
Min. . 200 psi, min 2-Inch
Min. 1.5-inch Polytherm, ACFoam II, ENRGY 3, ISO
(Optional) Additional
OBSOD
SBS-SA
(Optional) SBS-
SA, SBS-TA, APP-
SBS-SA, APP-
SA, SBS-TA,
:-2:250]
LWC-10
concrete
Range II Elastizell Lightweight
95+GL, Polytherm H or H-Shield
OB500
layers of base Insulation
TA
APP-TA
Insulating Concrete.
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654-RZ3
Certificate of Authorization k32455 6TH EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233.1330 Appendix 1, Page 47 of 65
ONEM01etc.
TABLE4A: LIGHTWEIGHT CONCRETE DECKS- NEW CONSTRUCTION
OR REROOF (TEAR -OFF)
SYSTEIVITYPEA-1: BONDED INSULATION,
BONDED ROOF COVER
System
i
No.
(Note 1)
Att, it: a
"ply
C
Typelv;�,',,
-,-,Aifach
�i'
at
I esipw�
_ I
ap'lply
Structural
Min. 200 psi, min 2-Inch
Min. 1.5-Inch Polytherm, ACFcam 11, ENRGY 3, ISO
(Opt I [anal) Addonal
Polyflex SA
(Optional) APP-
LWC_11
concrete
Range 11 Elastizell Lightweight
95+ GIL, Polytherm H or H-Shield
OBSOO
layers of base Insulation
OBSOO
Base
TA
APP-TA
-225.0
Insulating Concrete.
Min. 200 psi, min 2-Inch
Min! 0.25-inch
(Optional) SBS-
SBS-SA, APP-
LWC-12
Structural
Range 11 Elastizell Lightweight
Min. 1.5-Inch Polytherm, ACFoam 11, ENRGY 3, ISO
OB500
SECOROCKGypsum-
OBSOO
SBS-SA
SA, S854A, APP-
SA, SBS-TA,
-225.0
concrete
Insulating Concrete.
95+ GL, PolythermH or H-Shield
Fiber Roof Board
TA
APP-TA
Structural
Min. 200 psi, min 2-inch
Min. 1.5-inch Polytherm,ACFoam 11, ENRGY 3, [so
Min! 0 - 25-inch
Polyflex SA
(Optiona 1) APP-
LWC-13
concrete
Range 11 Elastizell Lightweight
95+ GL, Polytherm H or H-Shield'
03500
SECUROCK Gypsum-
OBSOO
Base
TA
APP-TA
-225.0
Insulating Concrete.
Fiber Roof Board
Structural
Min. 200 psi, min 2-inch
(Optional) Additional
(Optional) SBS-
SBS-SA, APP-
LWC-14
Range 11 Elastizell Lightweight
Min. 1.5-Inch, min. 2.0 pcf Insulfoarn
CR-20
layers of base Insulation
CR-20
SBS-SA
SA
SA
-180.0concrete
Insulating Concrete.
Structural
Min. 200 psi, min 2-inch
Min. 1.5-Inch Polytherm, ACFoam 11, Polytherm G
(Optional) Additional
(Optional) SBS-
I
SBS-SA, APP-
LWC-15
Range 11 Elastizell Lightweight
ACFoam 111, ENRGY 3, ISO 95+ GL, Polytherm H, H'
CR-20
layers of base Insulation
CR-20
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-180.0
concrete
Insulating Concrete.
Shield, H-Shield CG, Multi -Max FA3
TA I
APP-TA
Structural
Min. 200 psi, min 2-Inch
Min. 1.5-Inch Polytherm, ACFoam 11, Polytherm G,
I
ional) Additional
Polyflex SA
I
(Optional) APP-
LWC-16
concrete
Range 11 Elastizell Lightweight
ACFoam III, ENRGY 3, ISO 95+ GL, Polytherm H, H-
CR-20
laye(Opt I
layers of base Insulation
CR-20
Base
TA I
APP-TA
-280.0
Insulating Concrete.
Shield, H-Shield CG, Multi -Max FA3
I
Min. 200 psi, min 2-Inch
Min. 1.5-Inch Polytherm, ACFoam 11, PolythermG,
Min; 0.25-inch
(Optional) SBS-
SBS-SA, APP-
LWC-17
Structural
Range 11 Elastizell Lightweight
ACFoam III ENRGY 3, ISO 95+ GL, Polytherm H, H-
CR-20
I
SECUROCKGypsurn-
CR-20
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-180.0
concrete
Insulating Concrete.
H-S�Ield CG, Multi -Max FA3 or min. 2.�pcf
Shield,nsulfoam
Fiber Roof Board
TA
APP-TA
I
Min. 200 psi, min 2-Inch
Min. 1.5-inch Polytherm, ACFoam 11, Polytherm G
lvllnC 025-Inch.
.
Structural
ACFoam III, ENRGY 3, ISO 95+ GL, Polytherm H H_
Polyflex SA
(Optional) APP-
LyvC_18
concrete
Range It Elastizell Lightweight
Shield, H-Shield CG, Multi -Max FA3 or min. 2.�pcf
CR-20
SECbROCKGypsum-
CR-20
Base
TA
APP-TA
-180.0
Insulating Concrete.
Insulfoarn
Fiber Roof Board
W
AspHaTOROf PPMEDAsE P6. ;vm4'WMP�"a 604
,., wv
'p,
Structural
Min. 200 psi, min 2-Inch
Min. 1.5-Inch Polytherm, ACFoam 11, ENRGY 3, ISO
MIni . 0.25-Inch
SECILIROCK Gypsum-
OBSOO
BP -AA, SBS-
ptional) BP-
AA, SBS-AA, SBS_
SBS-AA, SBS-
-225.0
LWC-19
concrete
Range I Elastizell Lightweight
95+ GL, Polytherm H or H-Shleld
UB500
AA, APP-TA
TA, APP TA
Insulating Concrete.
Fiber Roof Board
TA or APP-TA
Min. 200 psi, min 2-Inch
Min. 1.5-inch Polytherm, ACFoam 11, Polytherm G
I
Min! 0.25-Inch
(0 to 1) BP-
LWC-20
Structural
Range 11 Elastizell Lightweight
ACFoam III, ENRGY 3, ISO 95+ GL, Polytherm H H-
CR -20
SECUROCK Gypsum-
CR-20
RP -AA, SBS-
AAPtS.n`AA S
'Sg
SBS-AA, SBS-
-180.0
concrete
Insulating Concrete.
Shield, H-Shield CG, Multi -Max FA3 or min. 2.� pcf
I
Fibe r Roof Board
AA, APP TA
TA or APP-TA
TA, APP TA
Insulfoarn
I
�kl
ZO�r"
ir.
' - '
N
wvVl '� i'�
�7
�i
Lo'vnnz_u_un-�=_"i
�Rrga
�i'l' BIT
LWC_21
Structural
Min. 200 psi, min. 2-Inch
Mln.1.5-inch,min. 2.Opcf tnsulfoam
CR-20
I
(Optional) Additional
I
CR-20
I
SBS-SA
I
(Optional) SBS-
I
SBS-SA, APP-
222.5
I
concrete
Mearicrete
layers of base insulation
SA
SA
NEMO ETC, ULC Evaluation Report P9290.02.08-R21 for F1.1654423
Certificate of Authorization #32455 e EDITION (2017) FBC NON.HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (9S4) 233-1330 Appendix 1, Page 48 of 65
ONEMOje�tc.
TABLE4A: LIGHTWEIGHT CONCRETE tREROOF
(TEAR -OFF)
BONDED INSULATION,
BONDED ROOF COVER
System
Deck
- Ugtitwelght Concrete (Note:.
• Base Insulation Layer.:" •. `-„ .,. , T
s �'^{ i° , e Covertioard `* * .a ",
t , ±,:' Y'$,Roof CoVeiF(Note 15) a:+ t �"''
.`,MDP'b is
Type
''�:AKaeh
, 'TyPe " °e, `
,..
" Attach',
P P,lye ,xy(Psfl„`
No.
IN 1)
14)
Structural
Min. 200 psi, min. 2-Inch
MIn.1.5-Inch Polytherm, ACFoam II, Palytherm G,
-
(Optional) Additional
(Optional) SBS-
SBS-SA, APP-
LWC-22
ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
layers of base Insulation
CR-20
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-222.5
concrete
Mearlcrete
Shield, H-Shleld CG, Multi -Max FA3
TA
APP-TA
Structural
2
Min. 200 psi, min. -Inch
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm G,
'
(Optional) Additional
Polyflex SA
(Optional) APP-
LWC-23
concrete
Mearlcrete
ACFoam III, ENRGY 95+GL, Polytherm H, H-
CR-20
layers of base Insulation
CR 20
Base
TA
APP TA
222.5
Shield, H-ShleldCCG, Multi -Max FA3
S,
i
Min. 1.5-Inch Polytherm, ACFoam Il, Polytherm G,
Min! 0.25-Inch
(Optional) SBS-
SBS-SA, APP-
LWC 24
Structural
Min. 200 psi, min. 2-Inch
ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
SECUROCK Gypsum-
CR-20
SBS-SA
SA, SBS-TA, APP-
SA, SBS-TA,
-222.5
concrete
Mearlcrete
Shield, H-Shleld CG, Multi -Max FA3 or min. 2.0 pd
Fiber Roof Board
TA
APP-TA
Insulfoam
Min. 1.5-Inch Polytherm, ACFoam II, Polytherm G,
Mln
0.25-Inch
Structural
Min. 200 psi, min. 2-Inch
ACFoam III, ENRGY 3; 150 95+GL, Polytherm H, H-
CR-20
SE
I
Gypsum-
CR-20
SA
(Optional) APP-
APP TA
222.5
LWC-25
concrete
Mearlcrete
Shield, H-Shield CG, Multi -Max FA3 or min. 2.0 pct
Fiber
Fiber
RoofOCK
Roof Board
BasePolyflex
Base
TA
Insulfoam
-ASPNALf ON,TURQIAPPOEd�BASE
,Yt'S:�_)` '�`{`2'�"
n'aYi
%fi rZ Ts� ��`,#d`�.�,�r4
NMI
MIn.1.5-Inch Polytherm, ACFoam II, Polytherm G,
MIn.
0.25-Inch
(Optional) BP -
Structural
Min. 200 psi, min.2-Inch ACFoam III, ENRGY 3, ISO 95+GL, Polytherm H, H-
CR-20
SE
Gypsum-
CR-20
BP -AA, SBS-
AA, SBS-AA, SBS-
SBS-AA, SBS-
-222.5
LWC-26
concrete
Mearlcrete Shield, H-Shield CG, Multi -Max FA3 or min. 2.0 pct
Fiber
Fiber
RoofROCK
Roof Board
APP TA
TA or APP-TA
TA APP TA
Insulfoam
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization 032455 691 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21:10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 49 of 65
i
NEMO I etc.
Lightweight
Anchor Sheet
"': Base Insulation; ° sE `
"t r Topusulation + '� ' i .. '?Roof:COVer
SysNo.tem(Nate
1) Deck
Concrete
Type Fasten Attach
-' Type
TypeY:. Attach".'r-Base PIY ; ! �'I, Ply Cap Ply
`
n
Min. 300 psi, min.
Min. Inch roof
Min. 22
2-Inch Celcore
7-Inch o.c. at min.
(Optional) Min.1.5-
Polytherm
Composite, Polytherm
osi
(Optional If
(Optional if
ga., Type
Cellular Concrete,
4-Inch lap and 7-
Inch Polytherm,
Cal posite, or min. 0.5-Inch
using AA
SBS-AA,
B, vented
Elastizell
GAFGLAS
OMG CR
Inch o.c. at two,
ACFoam II, Polytherm
HA
Structo High Density
HA
using AA
Base) BP -AA,
SBS-TA
-05.0
LWC 27
steel at
Lightweight
075
BSF
equally spaced
H, H-Shield, Multi-
Fiberboard Roof Insulation or
and
Ply) BP AA
SBS-AA, SBS-
APP-TA
max. 5 It
Insulating
center rows
Max FA3 or
min. 0.75-Inch Fesco Board
SBS
TA or APP-TA
spans
Concrete or
Polytherm
(homogeneous)
I
Mearlcrete
Min. 300 psi, min.
Min. 22
2-Inch Celcore
7-Inch o.c. at min.
Min. 1.5-Inch
585-SA,
ga., Type
Cellular Concrete,
4-inch lap and 7-
Polytherm, ACFoam
(Optional)
APP-SA,
LWC 28
B, vented
Elastizell
GAFGLAS
OMG CR
Inch o.c. at two,
II, Polytherm H, H-
HA
None
N/A
SBS-SA
SBS-SA, SBS-
-05.0
steel at
Lightweight
#75
BSF
equally spaced
Shield, Multi-Max�A,
APP-TA
AAA
max.5 ft
Insulating
center rows
FA3 or Polytherm
spans
Concrete or
Mearlcrete
Min. 300 psi, min.
Min. 22
2-Inch Celcore
7-inch o.c. at min.
MIn.1.5-Inch
i
ga.,Type
Cellular Concrete,
4-inch lap and 7-
Polytherm, ACFoam
poi ex SA
YR
O
( P
LWC-29
B, vented
Elastizell
GAFGLAS
OMG CR
II, Polytherm H, H-
HA
None
N/A
Base
-TA
App-7q
APP-TA
-05.0
steel at
Lightweight
g75
BSF
equaInch lly pat aced
equally spaced
Shield, Multherm
max. 5 It
Insulating
center rows
FA3 or Polytherm
spans
Concrete or
Mearlcrete
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL165&R23
Certificate of Authorization P32455 6m EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 50 of 65
ONEMOje�tc.
TABLE 4C: LIGHTWEIGHT CONCRETE DECKS — NEW CONSTRUCTION .RRERO (TEAR -OFF)
SYSTEM TYPE E: MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER
System - •' + x 'i ";'I Base Shedt_(Note Abel'aw)iti�,kPz �'t r'I TM{un.ryt 1 •y}Pg(tR0 Over (Note SS) iMDP '{
-
,C
'Deck (Note 1) 'Ughtwelght Concrete (Note 14) ° _ -
No. - T Fasten t '` :1
, .• YP e �+ Attach Ply„
PRE-ExisrENT CELLUTARLWC 'i:..-.�. a. 'c �:YIt�,
3Yi✓i.%�t,`z,t}l
n`'Base
5 f,.Cap'I"
"�E
�'>rrt+ly kr'�Sr lit
:.Nh !i:.�Y.(.la .} 3Yrr:4:!iLl�t4 i. 1. .;??}.'{;x.2�z Y.f� .� v���.:irm%� £awhtJM)�<fvw F` i.Lx�a ri?,.:
Min. 300 psi, min. 2-Inch thick
cellular lightweight concrete. Note:
Min. ZI ga., type B steel at max 5
To qualify the LWIC under this
7-Inch o.c. at a min. 3-Inch lap and 7-Inch o.c. at two,
(Optional) BP-
SBS-AA, APP-
LWC-30
it spans or structural concrete
assembly, an OMG CR BPFshaff
B3
OMG CR BPF
equally spaced, staggered rows in the field of the sheet
AA, SBS-AA
TA
-45.0
achieve an average withdrawal of 53
Ibf when tested per TAS 105 or
ANSI/SPRI FX-1
..QLCOHE fL2D37'.. �a� ..tf.,lr.4 ,J (?a. ,s - �rv� ��.,I,M
( )• G, ,. �.,. .
�1.'1�i 5( ,• Y46f4, 4Y3f
w.I"�i.M tt"i}. ihlN9'�iYi..N ,FiA'a>sv'C41Y9;!!' ^Sv 5.3lk..'S1+"A.�1:ii�i
,an^H:iid�.
Min. 0.0179-Inch Tensilform 5-75
or min. 0.0205-Inch Tensilform
Min. 200 psi, min. 2-Inch thick
o.c. at a min. 3-Inch lap and 16-Inch o.c. at two,
LWC-31
75 at max. 5 ft spans or
Celcare Cellular Concrete
BI, B2, B3 or B7
equally spaced, staggered rows in the field of the sheet
BP -AA, SBS-AA
SBS-AA
-37.5
structural concrete
LWC 32
Min. 22 ga., type B steel at max 5
MIn. 200 psi, min. 2-Inch thick
BS through B12
qTrufatFM-908-Inch
7-Inch o.c. at a min. 3-Inch lap and 7-Inch o.c. at two,BP-AA,
SBS-AA
SBS-AA
-45.D
ftspans or stmcural concrete
Celcare Cellular Conuete
equally spaced staggered rowsln the field of the sheet
Min. 225 psi, min. 2-Inch thickB3,
Min. 26 ga., type HF steel at max
Celcore MF Cellular Concrete with
41
82, B3, 84,LWC-33
9-Inch o.c. at a min. 3-Inch lap and 9-Inch o.c. at two,
5 ft spans or structural concrete
Celcore HS Rheology Modifying
B7, B8, B10,
equally spaced, staggered rows in the field of the sheet
BP -AA, S8S-AA
SBS-AA
-05.0
Admixture
or B12
Min. 225 psi, min. 2-Inch thick
Min. 22 ga., type B steel at max 6
Celcore MF Cellular Concrete with
Bl, B2, B3, B4,
7-inch o.c. at a min. 3-Inch lap and 14-Inch o.c. at two,
LWC 34
spans or structural concrete
Celcore HS Rheology Modifying
B7, B8, B30, Bll
OMG CR BPF
equally spaced, staggered rows In the field of the sheet
BP -AA SBS-AA
SBS-AA
-45.0ft
Admixture
or B12
Min. 225 psi, min. 2-Inch thick
Min. 22 ga., type B steel at max 6
Celcore MF Cellular Concrete with
B11 B21 B31 B4,
9.Inch o.c. at a min. 3-Inch lap and 9-Inch o.c. at two,
LWC-35
ft spans or structural concrete
Celcore HS Rheology Modifying
87 B8, 810, ell
OMG CR OFF
equally spaced, staggered rows in the field of the sheet
BP -AA, SBS-AA
SBS-AA
-45.0
Admixture
or B12
Min. 225 psi, min. 2-Inch thick
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
Trufast Twin
9-Inch o.c. at a min. 4-Inch lap and 18-Inch o.c. at two,
BP -AA, SBS-AA,
SBS-AA, SBS-
LWC-36
it spans or structural concrete
Celcore HS Rheology Modifying
81 or B2
Loc-Nall
equally spaced, staggered rows in the field of the sheet
APP-
TA, or APP-TA
-45.0
Admixture
TBAS-TAor
Min. 225 psi, min. 2-Inch thick
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
B2 (with poly-
Trufast Twin
9-Inch o.c. at a min. 4-Inch lap and 18-Inch c.c. at two,
SBS-SA, SBS-TA
SBS-SA, APP-
LWC-37
R spans or structural concrete
Celcore HIS Rheology Modifying
film top surface)
Loc-Nail
equally spaced, staggered rows in the field of the sheet
or APP-TA
SA, SBS-TA or
-45.0
Admixture
APP-TA
Min. 225 psi, min. 2-Inch thick
LWC-38
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
B2 (with poly-
Trufast Twin
9-Inch o.c, at a min. 4-Inch lap and 18-Inch o.c. at two,
Polyfiex SA Base
APP-TA
-45.0
it spans or structural concrete
Celcore HS Rheology Modifying
ilfmtopsurface)
Loc-Nall
equally spaced, staggered rows In the field of the sheet
Admixture
I
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654-R23
Certificate of Authorization #32455 a EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233-1330 Appendix 1, Page 51 of 65
ONEMOjetc.
TABLE 4C: LIGHTWEIGHT
CONCRETE DECKS — NEW CONSTRUCTION OR .. (TEAR -OFF)
SYSTEM TYPE E:
MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER
Beie Sheiieg
System
No.
Deck (Note 1)
Lightweight Concrete (Note 14)
Type vv'.l
*: Fasten
) zn ;� i. a „..,'3t�. Attach r5r' *1 , F:t r+i s, q, rj. Base Ply°lPtt)°
Min. 300 psi, min. 2-Inch thick
BP -AA, SBS-AA,
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
B2
Trufast FM-90
8-Inch o.c. at a min. 4-Inch lap and 8-Inch o.c. at three
SBS-TA or APP-
SBS-AA, SBS-
-60.0
LWC 39
ft spans or structural concrete
Celcore Rheology Modifying
equally spaced, staggered center rows
q Y P 8g
TA
TA, or APP-TA
re
Admixture
Min. 300 psi, min. 2-inch thick
SBS-SA, APP-
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
B2 (with poly-
Trufast FM-90
8-inch o.c. at a min. 4-Inch lap and 8-Inch o.c. at three
SBS-SA, SBS-TA
SA, SBS-TA or
-60.0
LWC-00
ft spans or structural concrete
Celcore HS Rheology Modifying
film top surface)
equally spaced, staggered center rows
or APP-TA
APP TA
Admixture
Min. 300 psi, min. 2-Inch thick
41
Min. 22 ga., type B steel at Max 5
Celcore MF Cellular Concrete with
B2 (with pof)-
Trufast FM-90
8-Inch o.c. at a min. 4-Inch lap and 8-Inch o.c. at three
Polyflex�SA Base
APP-TA
-60.0
LWC
ft spans or structural concrete
Celcore HS Rheology Modifying
film top surface)
equally spaced, staggered center rows
Admixture
LWC-02
Min. 22 ga., type B steel at Max 5
Min. 300 psi, min. 2-Inch thick
Blthrough B32
Trufast FM-90
7-Inch o.c. at a min. 3-Inch lap and 7-Inch o.c. at two,
BP -AA, SBS-AA,
APP-TA
SBS-AA, APP-
-75.0
ft spans or structural concrete
Celcore Cellular Concrete
or OMG CR BPF
equally spaced, staggered rows in the field of the sheet
SBS-TA,
TA
Min. 300 psi, min. 2-Inch thick
(Optional) BP-
Min. 22 ga., type B steel at max 5
Celcore MF Cellular Concrete with
Elastobase P
Trufast FM-290
10-Inch o.c. at a min. 4-Inch lap and 10-Inch o.c. at
AA, SBSAA, SBS-
S-AA,
SBS-AA, SBS-
-90.0
LWC-43
ft spans or structural concrete
Celcore HS Rheology Modifying
three equally spaced, staggered center rows
TA
TA•APPTA
Admixture
EulsTneLL IFL4994).r _ c __ ,p,�.f r,t Fr 35:- n
=c-1.�„3
- `L
. r„r �"a�._
J,u`91Y°;"S'� i. � 4)':i!'RSt „' +PA4��, s`t%fllp" k yp`�;^k-
t-,tea 3'�, G .. tip Rs"z3-•' t
';r, a i hag „ .z: 'r'"!. ;"n
�`3ft 75 ,
Min. 0.0179-Inch Tensllform 5-75
Min. 200 psi, min. 2-Inch thick Range
Trufast FM-90
7.5-Inch o.c. at a min. 3-Inch lap and 7.5-Inch o.c. at
BP -AA, SBS-AA,
SBS-AA, SBS-
LWC-04
or min. 0.0205-Inch Tensllform
11 Elastizell Lightweight Insulating
BS through B32
spaced, staggered rows In the field of the
SBS-TA, or APP-
TA,or APP-TA
-30.0
75 at max. 5 ft spans or
Concrete
Concrete
or OMG CR BPF
sheet
shee
TA
structural concrete
Min. 0.01794nch Tensllform 5-75
Min. 200 psi, min. 2-Inch thick Range
B2 (with
TrufastFM-90
7.5-Inch o.c. at a min. 3-Inch lap and 7.5-Inch o.c. at
SBS-SA, SBS-TA
SBS-SA, APP-
LWC-45
ormin.0.0205-inch Tensllform
II Elastizell Lightweight Insulating
poly-
two, equally spaced, staggered rows in the field of the
APP TA
SA, SBS-TA or
-30.0
75 at maz.5 ft spans or
Concrete
film top surface)
or OMG CR BPF
sheet
or
APP-TA
structural concrete
Min. 22 ga., type B steel at max 5
Min. 200 psi, min. 2-Inch thick Range
Trufast FM-90
7-Inch o.c. a[ a min.3-Inch lap and 7-Inch o.c. at two,
BP -AA, SB5-AA,
_
SBS-AA, SBS-
-05.0
LWC-06
ft spans or structural concrete
Il Elastizell Lightweight Insulating
B3 through B12
or OMG CR BPF
equally spaced, staggered rows in the field of the sheet
T5'TA'orAPp
TA, or APP-TA
Concrete
Min. 22 ga., type B steel at max 5
Min. 200 psi, min. 2-Inch thick Rangec.
(with poly-
Trufast
Inch o.c. at a miaggen. Inch lap and two,
5B5-SA, SBS-TA
SBS-SA, APP-
SA, SBS-TA or
-45.0
LWC47
It spans orstruc[ural concrete
II Elastizell Lightweight Insulating
film top surface)
it
CR BP
or CMG CR BPF
he fief ofat
equally spaced, staggered rows In the field of the sheet
a
or APP-TA
APP TA
Concrete
Min. 22 ga., type B steel at max 5
Min. 200 psi, min. 2-Inch thick Range
B2 (with poly-
7rufast FM-90
7-Inch o.c. at a min. 3-Inch lap and 7-Inch o.c. at two,
Polyflex SA Base
APP-TA
-05.0
LWC 48
it spans or structural concrete
11 Elastizell Lightweight Insulating
film top surface)
or OMG CR BPF
equally spaced, staggered rows In the field of the sheet
Concrete
NEMO ETC, LLC Evaluation Report P9290.02.08-1121 for FL165"23
Certificate of Authorization #32455 a EDITION (2017) FBC NON-HVH2 EVALUATION Revision 21: 10/08/Z018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 52 of 65
NNEMOje'tc.
TABLE4C: LIGHTWEIGHT
CONCRETE DECKS— NEW CONSTRUCTION
OR .. • .
ATTACHEDSYSTEVITYPEE: MECHANICALLY BASE
SHEET, BONDED ROOF COVER
System
r: r+'Y., Base
Sheetr`iNoteAbelow)' -
i ;,;'`�R`uof¢aVer (Note 15) n "r
a,`'MDP'".
No.
Deck (Note 1)
Lightweight Concrete (Note 14)
,8,
r"- (psfl"-''
Type
_ Fasten',
„ 'Attach ,
' 'r Base Ply
"' i6p Ply , :
Min. ga., type B vented steel
Min. 350 psi, min. 2-Inch thick
Elastobase P
(Optional) BP-
LWC-49
at max 5 ft spans or structural
x
Elastizell with Zell -Crete Fibers,
(with poly -film
Trufast FM-290
8-Inch o.c. at a min: 4-loch lap and 8-Inch o.c. at three,
AA, SBS-AA, SBS-
SBS-AA, SBS-
-52.5
concrete
supplemental attached with Roofgrip
top surface)
equally spaced, staggered rows In the field of the sheet
TA, or APP-TA
TA, or APP-TA
821 and 3-Inch plates at 1 per 8 ft2
Min. 350 psi, min. 2-Inch thick
Trufast Twin
SBS-AA, SBS-
LWC-50
Min. 22 ga., type B steel at max 5
Elastizell with Zell -Crete Fibers,
B2
Loc-Nails (min.
o.c. at a min. lap and 6-Inch oof at three,
BP -AA or SBS-AA
TA, SBS-or
-60.0
It spans or structural concrete
supplemental attached with Roofgrip
1.8-Inch)
equally
equally spaced, staggered rows In the field of the sheet
APP-TA or
#21 and 3-Inch plates at 1 per 8 ft2
APP-SA
Min. 350 psi, min. 2-Inch thick
Trufast Twin
SBS-SA, APP-
LWC-51
Mln. 22 ga., type B steel at max 5
Elastizell with Zell -Crete Fibers,
B2 (with poly-
Lac -Nails (min.
6-inch o.c. at a min. 4-Inch lap and 6-Inch o.c. at three,
SBS-SA, SBS-TA
SA,SBS-TA or
-60.0
It spans or structural concrete
supplemental attached with Roofgrip
film top surface)
1.8-Inch)
equally spaced, staggered rows In the field of the sheet
or APP-TA
APP TA
#21 and 3-Inch plates at 1 per 8 ft2
Min. 350 psi, min. 2-Inch thick
Trufast Twin
LWC-52
Min. 22 ga., type B steel at max 5
Elastizell with Zell -Crete Fibers,
B2 (with poly-
Loc-halls (min.
Lo-Inch)
6-inch o.c. at a min. 4-Inch lap and 6-Inch o.c. at three,
Polyflex SA Base
APP-TA
-60.0
Itspans or structural concrete
supplemental attached with Roofgrip
film top surface)
equally spaced, staggered rows In the field of the sheet
B21 and 3-Inch plates at 1 per 8 ft2
i_MMRL6RETE.(FL13492):
s ' % { .s„ w, a .r ..'r„ t�,-✓. , •� ; -a , h ° _`
'::. ,n .. i4,1.::.
t5.
LWC-53
Min. 24 ga., type B steel at max 5
Min. 200 psi, min. 2-Inch thick
BS through B12
Trufast FM-90
7.5-Inch o.c. at a min. 3-Inch lap and 10-Inch o.c. at two,
BP -AA, SBS-AA
SBS-AA
-30.0
It or structural concrete
Mearlcrete
or CMG CR BPF
equally spaced, staggered rows in the field ofthe sheet
LWC-54
Min. 22 ga., type B steel at max 5
Min. 300 psi, min. 2-Inch thick
BS, B2 or B12
Trufast FM-90
7-Inch o.c. at a min. 4-Inch lap and 7-Inch o.c. at two,
BP-AASBS-AA
,
or APP, -
SBS-AA, SBS-
-45.0
ft spans or structural concrete
Mearlcrete
or OMG CR BPF
equally spaced, staggered rows in the field of the sheet
TBAS-TA,
TA, or APP-TA
Min. 22 ga., type B steel at max 5
Min. 300 psi, min. 2-Inch thick
B2 (with poly-
Trufast FM-90
7-Inch o.c. at a min. 4-Inch lap and 7-Inch o.c. at two,
SBS-SA; SBS-TA
SBS-SA, APP-
LWC-55
ft spans or structural concrete
Mearlcrete
Jilm topsurfoce)
or CR BPF
equally spaced, staggered rows In the field of the sheet
or APP-TA
SA, SBS-TA or
-45.0
APP-TA
Min. 22 ga., type B steel at max 5
Min. 300 psi, min. 2-Inch thick
B2 (with poly-
Trufast FM-90
7-inch o.c. at a min. 4-Inch lap and 7-inch o.c. at two,
Polyflex SA Base
-05.0
LWC-56
ft spans or structural concrete
Mearlcrete
film top surface)
or OMG CR BPF
equally spaced, staggered rows In the field of the sheet
Min. 22 ga., type B steel at max 5
Min. 300 psi, min. 2-Inch thick
BS, B2, B3, B7 or
Trufast FM-90
7-Inch o.c. at a min. 4-Inch lap and 7-Inch o.c. at two,
BP -AA, SBS-AA,
or APP-
-
-52.5MIn.
LWC-57
ft spans or structural concrete
Mearlcrete
B31
or CMG CR BPF
equally spaced, staggered rows In the field of the sheet
TAS-TA,
A
22 ga., type B steel at max 5
MIn. 300 psi, min. 2-Inch thick
B2 (with poly-
Trufast FM-90
7-Inch o.c. at a min. 4-Inch lap and 7-Inch o.c. at two,
SBS-SA, SBS-TA
K_TA
-
or
-52.5LWC-59
LWC-58
ft spans or structural concrete
Mearlcrete
film top surface)
or OMG CR BPF
equally spaced, staggered rows In the field of the sheet
or APP-1S
Min. 22 ga., type B steel at max 5
Min. 300 psi, min. 2-Inch thick
B2 (with poly-
Trufast FM-90
7-Inch o.c. at a min. 44nch lap and 7-Inch o.c.at two,
Polyflex SA Base
-52.5
ft spans or structural concrete
Mearlcrete
film top surface)
or OMG CR BPF
equally spaced, staggered rows In the field of the sheet
A. Base Sheets options in Table 4C are coded as follows:
D B1= Polyglass G2 Base, B2= Elastobase or Elastobase P;B3= GAFGLAS B75;B4= GAFGLAS Stratavent Nailable Venting Base Sheet, BS=GAFGLAS Ply 4;B6= GAFGLAS FlexPly 6,B7=JM Perma Ply No. 28, B8=1M Vensulatlon;
B9 =1M GlasPly IV; B10 =JM GlasPly Premler; 611=Tamko Glass -Base; B32 =Tomko Vapor -Chan
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654-R23
Certificate of Authorization k32455 Eta EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 53 of 65
ONEMOjetc.
TABLE 5A: CEMENTITIOUS
WOOD FIBER DECKS -NEW CONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE
A-1: BONDED INSULATION, BONDED ROOF COVER
' System:
" '"
^ Base insulation Layer}, ` x
5,t i)[="tfn 'kx ziop In§uYatlon LaVar` -x' ' +fir xlr z
+1'�rr'sy u=-a7ax+'z, L.rrRrao Co{ierl(Notg 451`auH c^'�r' '"r;t'�°'x
�'la r t ,
No.
Deck (Note 1)
Type - Attarh
MIn.1.5-Inch Polytherm, ACFoam
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
(Optional) BP -AA,
505-AA,
CWF-1
Min. 2.5-Inch Tectum
II, 15095+GL, Polytherm H, H-
D-IS or
SECUROCK Gypsum -Fiber Roof Board or min.
D-IS or OB500
BP -AA, SBS-AA
SBS-AA, SBS-TA or
,
-45.0
Plank or Tectum LS Plank
Shield, Polytherm, ENRGY-3
OB500
Structodek High Density Fiberboard
APP TA
APP APP-TTA
Roof Insulation
Roof
Min. 2.5-Inch Tectum
Min. 1.5-Inch Polytherm, ACFoam
D-IS or
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
SBS-TA, SBS-SA or
(Optional) SBS-TA,
SBS-TA,SBS-
CWF-2
Plank or Tectum LS Plank
II, ISO 95+GL, Polytheml H, H-
OB500
SECUROCK Gypsum -Fiber Roof Board
D-IS or OB500
APP-TA
SBS-SAor APP-TA
SA, APP-TA,
-05.0
Shield, Polytherm, ENRGY-3
APP-SA
Min. 2.5-Inch Tectum
Min. 1.5-Inch Polytherm, ACFoam
D-IS or
Min. 025-Inch Dens Deck, Dens Deck Prime,
CWF-3
Plank or Tectum LS Plank
11 ISO 95+GL, Polytherm H, H-
03500
SECUROCK Gypsum -Fiber Roof Board
D-IS or OB500
Polyflex SA Base
(Optional)APP-TA
APP-TA
-05.0
Shield, Polytherm, ENRGY-3
Min. 1.5-Inch Polytherm, ACFoam
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
(Optional) BP -AA,
SBS-AA,
CW F-4
Min. Tectum
II, ISO 95+GL, Polytherm H, H-
C0.-20
SECUROCKGypsum-Fiber Roof Boardrb min.
CR-20
BP -AA, SBS-AA
SBS-AA, SBS-TA or
SBS-TA,
-52.5
or Tect
Plank or Tectum l5 Plank
Shield, Polytherm, ENRGY-3
Structodek High Density Fiberboard
APP TA
APP TA
Roof
0.00f Insulation
Min.2.5-inch Tectum
Min. 1.5-Inch Polytherm, ACFoam
MIn.0.25-Inch Dens Deck, Dens Deck Prime,
SBS-TA,SBS-SA or
(Optional)SBS-TA,
SBS-TA, SBS-
CWF-5
Plank or Tectum LS Plank
II, I50 95+GL, Polytherm H-
CR-20
SECUROCK Gypsum -Fiber Roof Board
CR-20
APP-TA
SBS-SA or APP-TA
SA, APP-TA,
-52.5
Shield, Polytherm, ENRGY-3
I
APP-SA
MF-6
Min. 2.5-Inch Tectum
Min. 1.5-Inch Polytherm, ACFoam
It, 150 95+GL, Polytherm H. H-
CR-20
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
CR-20
Polyflex SA Base
I
(Optional) APP-TA
APP-TA
-52.5
Plank or Tectum LS Plank
Shield, Polytherm, ENRGY-3
SECUROCK Gypsum -Fiber Roof Board
NEMO ETC, LLC Evaluation Report 1P,9290.02.08-R21 for FL16aR23
Certificate of Authorization H32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/00/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 54 of 65
ONEMO I etD c.
...
• O . .
SYSTEM TYPE A-2: MECHANICALLY
ATTACHED ANCHOR SHEET,
BONDED INSULATION, BONDED ROOF
COVER
System
Deck.
.AnchorSheet-
No.
Note1
( )
Type "Fasten Attach
YP
Type ,•Attach
YP
a;�. Type.
Basep Ply'„
MDP (psf)
,
9-Inch o.c. at min.
Min. 1.5-inch Polytherm,
Min. 0.25-Inch Dens Deck,
Min. 2.5-Inch
Elastobase,
flinch lap and 12-
ACFoam II, Polytherm G,
Dens Deck Prime, S K
Tectum Plank
Elastobase P,
Trufast
Inch o.c. at two,
ACFoam III, 15095+GL,
Hot
Board,
Gypsum -Fiber Roof Board,
Hot
BP -AA,
(Optional) BP-
SBS-AA,
CWF-7
or Tectum LS
Polyglass G2
Inuldek
equallyspaced,
Polytherm H,H-Shield,
asphalt
Min. 0.75-Inch Fesco Board
asphalt
SBS-AA
AA, SBSPAA, SBS-
,
-30.0•
Plank
Base
Loc-Nall
staggered center
ENRGY 3, Polytherm or
(homogeneous) or min. 0.5-
TA APP-TA
APP-T
APP-TA
rows
Multi -Max FA3,
Density
Inch Structboard
HighInsulation
Roof
:Fiberboard Roof Insulatlon
9-Inch o.c. at min.
Min. 1.5-Inch Polytherm,
Min.2.5-Inch
Elastobase,
Trufast
4-Inch lap and 12-
ACFoam II, Polytherm G,
MIn.0 Dens Deck,
SBS-TA,
(Optional) 585-
SBS-TA,
CWF-8
Tectum Plank
Elastobase P,
Inuldek
Inch o.c. at two,
-
ACFoam III, 15095+GL,
Hot
Dens Deck Prime,
Deck
Hot
SBS-SA or
TA, 505-SA or
SBS-SA,
-30.0•
or Tectum LS
Polyglass G2
Loc-Nall
equally spaced,
Polytherm H, H-Shield,
asphalt
Roof Board
Gypsum -Fiber Roof Board
asphalt
APP TA
APP TA '
APP-TA,
Plank
Base
staggered center
ENRGY 3, Polytherm or
APP-SA
rows
Multi -Max FA3,
9-Inch o.c. at min.
Min. 1.5-Inch Polytherm,-
Min. 2.5-Inch
Elastobase,
Trufast
4-Inch lap and 12-
-
ACFoam II, Polytherm G,
Min. D.25-Inch Deck,
CWF-9
Tectum Plank
Elastobase P,
Inuldek
Inch o.c. at two,
ACFoam III, 15O95+GL,
Hot
Ss
Dens Deck Prime,f CK
Hat
PolyFlex
(Optional) APP-
APP-TA
-30.0•
or Tectum LS
Polyglass G2
Loc-Nail
equallyspaced, - --
Polytherm H; H-Shield,
asphalt
Board
Gypsum -Fiber Roof Board
asphalt
SA Base
TA
Plank
Base
staggered center
ENRGY 3, Polytherm or
rows
Multl-Max FA3,
9-Inch o.c. at min.
Min. 1.5-Inch Polytherm, -
Min. 0.25-Inch Dens Deck,
Min.2.5-Inch
Elastobase,
Trufast
4-Inch lap and 18-
-
ACFoam 11, Polytherm G,
Dens Deck Prime, SECUROCK
Gypsum -Fiber Roof Board,
(Optional) BP-
SBS-AA,
WF-10
Tectum Plank
Elastobase P,•
Twin Loc-
Inch o.c. at two,
ACFoam 111, 15095+GL,
Hot
Min. 0.75-Inch Fesco Board
Hot
BP -AA;
AA, SBS-AA, SBS-
SBS-TA,
-45.0•
or Tectum LS
Polyglass G2
Nall
equally spaced,
Polytherm H, H-Shield,
asphalt
'(homogeneous) 0.5-
asphalt
SBS-AA
TA or APP-TA
APP-TA
Plank
Base
staggered center
ENRGY 3, Polytherm or
Hor igh D
Inch Structboard dekRoo High Density
rows
Multi -Max FA3,
Fiberboard Roof Insulation
9-Inch o.c. at min.
Min. 1.5-Inch Polytherm,
-
Min. 2.5-Inch
Elastobase,
Trufast
4-Inch lap and IS-
ACFoam II, Polytherm G,
Min. 0.25-Inch Dens Deck,
• SBS-TA,
(Optional) SBS-
SBS-TA, ,
F-11
Tectum Plank
Elastobase P,
Twin Lac-
Inch o.c. at two,
.ACFoam III, 15095+GL,
Hot
Dens Deck Prime, CK
Hat
SBS-SA or
TA, or
SBS-SA,
-05.0•
or Tectum LS
Polyglass G2
Nall
equallyspaced,
Polytherm H, H-Shield,
asphalt
f Board
Gypsum -Fiber Roof Board
asphalt
APP-TA
APP-TA
-TA
APP-TA,
Plank
Base
staggered center
ENRGY 3, Polytherm or
APP SA
rows
Multi -Max FA3,
9-Inch o.c. at min.
Min. 1.5-Inch Polytherm,
Min. 2.5-Inch
Elastobase,
Trufast
4-Inch lap and 18-
ACFoam II, Polytherm G,
Min. 0:25-Inch Dens Deck,
WF-12
Tectum Plank
Elastobase P,
Twin Loc _
Inch o.c. at two,
ACFoam III, 15095+GL,
Hot
Dens Deck Prime, CK
Hot
PolyFlex
(Optional) APP-
APP-TA
45.0 .
or Tectum LS
Polyglass G2
Nail
equally spaced,
Polytherm H, H-Shield,
asphalt
Board
Gypsum -Fiber Rooff BBoard
asphalt
SA Base
TA
Plank '
Base
staggered center
ENRGY 3, Polytherm or,
rows
Multi-MaxFA3, -
NEMO ETC, LLC Evaluation Report 139290.02.08-11121 for FL1654-R23
Certificate of Authorization #32455 0 EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen,.PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 55 of 65
ONEMOjetc.
TABLE SC: CEMENTITIOUS ... FIBER DECKS —NEW CONSTRUCTION, REROOF(TEAR-OFF)oR RECOVER
ATTACHEDSYSTEMTYPEB: MECHANICALLY BASE INSULATION,BONDED TOP INSULATION,BONDED ROOF COVER
Y '!*i1x.0 b[ In h:,rl )+Car Top2lpsglatlo°n �aYer �f) rs,`✓c,p r you y„gw it} +� Re9f CovAr (Note;15) > y;r `r4a '�
System Deck Base Ihsulation La er s+,- MID P
No. ,(Nate 3) Type '-Fasten 111; i;;Attachr . Io•".- TYPe, �'-; '` -'6 AZtarCh ,q.r94se PI 1,."a +i n,ta-, ,tPly *5upu!rin (. ''• ;:CaapPly , a .a.P 12
Min. 2.5-Inch Tectum Min. 2-Inch H- OMG Polymer GypTec Plate with Min. 0.5-Inch Structodek L Hot (Optional if (Optional If using AA SBS-AA,
CWF-13 Plank or Tectum LS Shield or Polymer GypTec or Trufast TL 3 1per 4 ft2 High Density Fiberboard using AA Ply) Base)BP-AA, SBS-AA, SBS-TA, -45.0•
Plank Polytherm in. Plate with TL Fastener Roof Insulation asphalt BP -AA, SBS-AA SBS-TA or APP-TA' APP-TA
System
Deck
-. i:r Top Idsulation layeff' v `^+'
�" _
CoSe7.(Note P) +
('.
^ '
MDP'(Psf)i
No.
(Note 1)
Base Insulation Layer ., .. ,Typ¢..r, , . r:z •: ,.
-�
rt . Fasten r ,;,::...?
AtEpbli;, °, ,'-; :Base Ply
: '...
'- PIVm . },_ ,..
,
e .
Min. 2.5-Inch
Min. 0.25-Inch Dens Deck, Dens Deck Prime or
(Optional) One or more
Trufast Twin Loc-Nails
(Optional If
(Optional if using AA
SBS-AA,
CWF-14
Tectum Plank or
SECUROCK Gypsum -Fiber Roof Board or min.
layers, any combination,
(min. 1-Inch
2
1 per 2 ft using AA Ply)
Base) BP -AA, SBS-AA,
SBS-TA,
-45.0 -
Tectum LS Plank
odek High Density Fiberboard
loose laid
embedment)
BP -AA, SBS-AA
SBS-TA or APP-TA
APP-TA
Roof Sabo
Roof Insulation
i
CEMENTITIOUS WOOD FIBER •ECKS—
NEW CONSTRUCTION OR REROOF (TEAR -OFF)
SYSTEMTYPEE: NON -INSULATED, MECHANICALLY
ATTACHED BASE SHEET, BONDED ROOF COVER
` '� Base'Sryet r fof
•'"Cove%1(Note SS),'."k+ t^T -' c
System
Deck
(Note 1)
Type • "-'. Fasten
.. Attach
; ' Bese PIy '> -
,,,Cap Ply,
Min. 2.5-inch Tectum
o.c. at mine 4-Inch lap and at
(Optional) BP -AA, SBS-AA,
SBS-AA,
CWF-15
Plank or Tectum LS
Elastobase, Elastobase P, Polyglass G2 Base
Trufast Inuldek Loc-Nall
enter rows
s
two; equally spaced, staggered center rows
two, a
SBS-TA or APP-TA
SBS-TA,
-30.0•
Plank
APPTA
Min. 2.54nch Tectum
9-Inch o.c. at min. 4-Inch lap and 18-Inch o.c. at
(Optional) BP -AA, SBS-AA,
SBS-AA,
CWF-16
Plank er Tectum LS
Elastobase, Elastobase P, Polyglass G2 Base
Trufast Twin Loc-Nalls
two, equally spaced, staggered center -rows
S8S-TA or APP-TA
SBS-TA,
-45.0•
Plank
APP-TA
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654�R23
Certificate of Authorization #32455 bra EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2,018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 56 cf 65
J
NEMO l etc.
TABLE
6A: GYPSUM DECKS - REROOF (TEAR -OFF)
SYSTEM TYPE
A-1: BONDED INSULATION,BONDED ROOF COVER
System ' - Base Insulation layer - s:
f ,+ +. "p:j, d r,Top Insulation Layer y++ I' -.'I ` +'r (+ + Roof'Cover (Note 15) + • `�:. i INIDP ;i
No.
Deck (Notes 1 & 12)
Type
Attach
Type' Attach.
Base Ply,'
PIY Ply
SERF -ADHERING BASE:
t, m J,4�rt
N
„ 1�, m �. +G 1.S Y++w,x a �'� ... itp e r '}!E
fir, v3, .cu a.:a
zY 29
s,l''.4 ,M4:t.�
Existing, sound
Min. 1.5-Inch Polytherm, ACFoam II,
G-1
poured gypsum or
ENRGY 3, Polytherm H or H-Shleld or min.
OB500
Min. 0.25-Inch Dens Deck Prime
OB500
SBS-SA
(Optional) SBS•SA, SBSTA,
SBS-SA, APP•SA,
-72.5
gypsum plank deck
2.0 pcf, Insulfoam
APP TA
SBS TA, APP TA
Existing, sound
(Optional) additional layers(s) of hoseInsulation
_-112.5
G-2
poured gypsum or
Min. 1.5-Inch min. 2.0 pcf, Insulfoam
OB500
OB500
SBS-SA
(Optional) SBS-SA
SBS-SA, APP-SA
gypsum plank deck
G-3
Existing,
d or
Min. 1.5-Inch Polytherm, ACFoam II,
OB500
(Optional) additional layers(s) of base
OB500
SBS•SA
(Optional) SBS-SA, SBS-TA,
SBS-SA, APP-SA,
poured gypsum
gypsum plank deck
ENRGY 31 Polytherm H or H-Shleld
Insulation
APP-TA
SBS-TA, APP-TA
-112.5
Existing, sound
Min. 1.5-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base
PolyflexSA
G-0
poureded gypsum
ENRGY 3, Polytherm H or H-Shleld
OB500
Insulation
OB500
Base
(Optional)APP-TA
APP-TA
-112.5
gypsum plank deck
Existing, sound
Min. 1.5-Inch Polytherm, ACFoam II,
G-5
poured gypsum or
ENRGY 3, Polytherm H or H-Shield or min.
OB500
Min . 0.25-Inch SECUROCK Gypsum -Fiber
OB500
SBS-SA
(Optional) SBS-SA, SBS-TA,
SBS-SA, APP-SA,
-112.5
gypsum plank deck
2.0 pcf, Insulfoam
Roof Board
APP-TA
SBS-TA, APP-TA
Existing, sound
Min.1.5-Inch Polytherm, ACFoam II,
G-6
poured gypsum or
ENRGY 3, Polytherm H or H-Shield or min.
03500
Min. 0.25-inch SECUROCK Gypsum -Fiber
OB500
Polyflex SA
(Optional) APP-TA
APP-TA
-112.5
gypsum plank deck
2.0 pcf, Insulfoam
Roof Board
Base
G-7
Existing, sound
poured gypsum or
Min. 1.5-Inch Polytherm, ACFoam II,
M-OSFA
Min. 0.25-Inch Dens Deck Prime
M-OSFA
SBS-SA
(Optional) SBS-SA, SBS-TA,
SBS-SA, APP-SA,
-72.5
gypsum plank deck
ENRGY 3, H-Shleld or Multi -Max FA3
APp TA
SBS-TA, APP-TA
Existing, sound
Min. 1.5-Inch Polytherm, ACFoam II,
yt
(Optional) additional layers(s) of base
(Optional)SBS-SA, SBS-TA,
SBS-SA, APP-SA,
G-8
poured gypsum or
ENRGY 3, H-Shield or Multi -Max FA3
M-OSFA
insulation and/or min. 0.25-Inch SECUROCK
M-OSFA
SBS-SA
APP-TA
SBS-TA, APP-TA
-202.5
gypsum plank deck
Gypsum -Fiber Roof Board
Existing, sound
Min.1.5-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base
Polyflex SA
G-9
poured gypsum or
ENRGY 3, H-Shield or Multi -Max FA3
M-OSFA
insulation and/or min. 0.25-Inch SECUROCK
M-OSFA
Base
(Optional) APP-TA
APP-TA
-202.5
gypsum plank deck
Gypsum -Fiber Roof Board
Existing, sound
MIn.1.5-Inch, min. 2.0 pcf EPS Insulation
G-10
poured gypsum or
board, Polytherm, ACFoam II, Polytherm
CR-20
Min. 0.25-Inch Dens Deck Prime
CR-20
SBS-SA
(Optional) SBS-SA, S0S-TA,
SBS-SA, APP-SA,
72 5
gypsum plank deck
G, ACFoam III, ENRGY 3, Polytherm H, H-
APP-TA
SBS-TA, APP-TA
Shield, H-Shield CG or Multi -Max FA3
Existing, sound
(Optional) additional layers of base
G-11
poured gypsum or
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
CR-20
insulation
CR-20
SBS-SA
(Optional) SBS-SA
SBS-SA
-240.0
gypsum plank deck
Existing. sound
Mi.. -inch SECUROCK Gypsum -Fiber
(Optional)SBS-SA, SBS-TA,
SBS-SA, AP -SA,
G-12
poured gypsum or
MIn. 1.5-Inch, min. 2.0 pcf Insulfoam
CR-20
Roof Board
CR-20
SBS-SA
qpp-TA
SBS-TA, APP-TA
-240.0
gypsum plank deck
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL3654•R23
Certificate of Authorization R32455 6m EDITION (2017) FBC NON•HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 PDlyglass Modified Bitumen Roof Systems, (954) 233-1330 Appendix 1, Page 57 of 65
ONEMOjetc.
TABLE
6A: GYPSUM DECKS —REROOF (TEAR -OFF)
SYSTEM TYPE
A-1: BONDED INSULATION,BONDED ROOF COVER
System
-Deik'(Notdsl&12)
Bese lhsulatlan layet` <'"V
' ToP Insulation layer ar'; f, ,"ti,
y��;lrl,;, 1' Pa'Roo);Co�eT �NoLe 16)r"`'I
igMNo
Type
Attach
Type..
Attach -
v ' BasePI y PI V
i ','1Y'
GpP(Psfl'Existing,
sound
Min. 0.25-Inch SECUROCK Gypsum -Fiber
PoWex SA
G-13
poured gypsum or
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
CR-20
Roof Board
CR-20
APP-TA
APP-TA-24D.0
gypsum plank deckMin.
Base(Optional)
sound
1.5-Inch Polytherm, ACFoam II,EXlsting,
(Optional) additional layers(s) of base
G-14
gypsum or
Polytherm G, ACFoam III, ENRGY 3,
CR-20
Insulation and/or min. 0.25-Inch SECUROCK
CR-20
Polyflex SApoured
APP-TA
APP-TA-257.5
gypsum plank deck
Polytherm H, H-Shleld, H-Shield CG or
Gypsum -Fiber Roof Board
Base(Optional)
Multi -Max FA3
Existing, sound
g
Min. 1.5-inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base
G-15
poured gypsum
Polytherm G, ACFoam III, ENRGY 3,
CR-20
Insulation and/or min. 0,25-Inch SECUROCK
CR-20
SBSSA
(Optional) SBS-SA, SBS-TA,
S85-SA, APP-SA,
-257.5
gypsum plank deck
Polytherm H, H-Shleld, H-Shield CG or
Gypsum -Fiber Roof Board
APP-TA
SBS-TA, APP-TA
Multi -Max FA3
, J �tt F 1Y Y#ty i
[0.5PNALt-APPDFd BASE t�.}.ix. i ✓ ;Tk' �&V_ n, 4.., c
rv� }'c� t%i�.
Jy, aN: C�j,t.
d',_w '{�' ( b„ -(T..y
T#1 e n �C. ,a tiflitV'ua MA: )��v< ..b .�t
.y'S
vwY'iF1 .�Yh�):,�
6+ t5Y,,y{ `. 5 Pht4 ,§a Tb'%3''
e� X.trt r:i` YS.�x. ..40�e.f` kNCC{
fF6 A1v' d�'�es w�19""
'•
Existing, sound
Min. 0.25-Inch Dens Deck, Dens Deck
(Optional if
(Optional If using AA Base)
G-16
poured gypsum or
Prime or SEW ROCK Gypsum -Fiber Roof
CR-20
None
N/A
using AA Ply)
BP -AA, SBS-AA, SBS-TA or
SBS-AA, 505-TA,
-245.0
gypsum plank deck
Board
BP -AA, SBS-AA
APP-TA
APP TA
"'
'6WAPPUEOBASE .. ;2 {
Min. 1-Inch Polytherm, ACFoam II,
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
Existing, sound
Polytherm G, ACFoam III, EnergyGuard
DEXcell FA Glass Mat Roof Board, SECUROCK
G-17
poured gypsum
Polyiso Insulation, ENRGY 3, Polytheml H,
M-0SFA
Gypsum -Fiber Rool' Board or SECUROCK
M-0SFA
SBS-CA1, SBS-
(Optional) 5BS-CA1, SBS
SBS-CAI, SBS-
-120.0
gypsum plank deck
H-Shield ISO 95+GL, Multi -Max FA3,
Glass -Mat Roof Board, min. 7/16-Inch
CA2
CA2
C112 APP CAS
RESISTA or UltraMax or min. 2-Inch
DEXcell Cement Roof Board or min. 0.5-inch
DECKMATE Plus or DECKMATE Plus FA
SECUROCK Cement Roof Board
Min. 1-Inch Polytherm or ACFoam II,
PolythermG, ACFoam III, EnergyGuard
Min. 0.25-Inch Dens Deck Prime or DEXcell
Existing, sound
Polyiso Insulation, ENRGY 3, Polytherm H,
FA Glass Mat Roof Board, min. 7/16-Inch
SBS-CA3, SBS-
G-1B
paused gypsum
H-Shield, ISO 95+GL, Multi -Max FA3,
M-0SFA
DEXcell Cement Roof Board or min. 0.5-Inch
M-0SFA
SBSCA3
None
CA2 APP CA3
-127.5
gypsum plank deck
RESISTA or UltraMax or min. 2-Inch
SECUROCK Cement Roof Board
DECKMATE Plus or DECKMATE Plus FA
Min. 1-Inch Polytherm or ACFoam II,
Existing, sound
Polytherm G, ACFoam III, EnergyGuard
G-19
poured gypsum or
Polyiso Insulation, ENRGY 3, Polytherm H,
M-0SFA
Min. 0.25-Inch SECUROCK Gypsum -Fiber
M-0SFA
SBSCA3, SBS
None
SBS-CA3, SBS-
-227.5
gypsum plank deck
H-Shield, ISO 95+GL, Multi -Max FA3,
Roof Board
CA2
CA2 APP CA1
RESISTA or UltraMax or min. 2-Inch
DECKMATE Plus or DECKMATE Plus FA
Min. 1-Inch Polytherm or ACFoam 11,
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
Existing, sound
Polytherm G, ACFoam III, EnergyGuard
DEXcell FA Glass Mat Roof Board, SECUROCK
G-20
poured gypsum or
Polyiso Insulation, ENRGY 3, Polytherm H,
M-0SFA
Gypsum -Fiber Roof Board or SECUROCK
M-0SFA
SBS-CA3, SBS
None
SBSCAl, SBS
-202.5
gypsum plank deck
H-Shleld, ISO 95+ GL, Multi -Max FA3,
Glass -Mat Roof Board, min. 7/16-Inch
CA2
CA2
RESISTA or UltraMax or min. 24nch
DEXcell Cement Roof Board or min. 0.5-Inch
DECKMATE Plus or DECKMATE Plus FA
SEW ROCK Cement Roof Board
NEMO ETC, LLC Evaluation Report P9290.02.08-1121 for FL1654-R23
Certificate of Authorization #32455 fir" EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/OBjX018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 1 Appendix 1, Page 58 of 65
M
NEMOjetc.
TABLE
GA: GYPSUM DECKS — REROOF (TEAR -OFF)
SYSTEM TYPE
A-1; BONDED INSULATION, BONDED ROOF COVER
System
Base Insulation Layer
Top Insulation gayer
No.
Deck (Notes 1 & 12)
41151)
Type
Attach
Type
Attack
Base Ply
Ply :, 3,1
6pi Ply
Existing, sound
Min. 1-Inch Polytherm, ACFoam 11,
Min. 0.25-Inch Dens Deck Prime, DEXcell FA
SBS-CA1, SBS-
(Optional) SBS-r—Al, SBS-
SBS-CA1, SBS-
G-21
poured gypsum or
Polytherm G, ACFoamIII, ENRGY 3,
OBSOO
Glass Mat Roof Board or SECUROCK
OB500
CA2
CA2
CA2, APP-CA1
-112.5
gypsum plank deck
Polytherm H, H-Shield or Multi -Max FA3
Gypsum -Fiber Roof Board
Existing, sound
Min. 1-inch Polytherm, ACFoam 11,
Min. 0.25-inch Dens Deck Prime or
SBS-CAS, SBS-
(Optional) SBS-CA1, SBS-
SBS-CAISBS-
G-22
poured gypsum or
Polytherm G, AOFoam III, ENRGY 3,
CR-20
SECUROCK Gypsum -Fiber Roof Board
CR-20
CA2
CA2
CA2,APP-CA1
-120.0
gypsum plank deck
Polytherm H, H-shield or Multi -Max FA3
Existing, sound
Min. 1-Inch Polytherm, ACFoam 11,
Min. 0.25-Inch Dens Deck Prime or DEXcell
SBS-CA1, SBS-
G-23
poured gypsum or
Polytherm G, ACFoam 111, ENRGY 3,
CR-20
FA Glass Mat Roof Board
CR-20
505-CA1
None
CA2, APP-CA1
-127.5
gypsum plank deck
Polytherm H, H-Shield or Multi -Max FA3
Existing, sound
Min. 1-Inch Polytherm, ACFoam 11,
Min. 0.25-Inch SECUROCK Gypsum -Fiber
SBS-CA1, SBS-
SBS-CA1, SBS-
G-24
poured gypsum or
Polytherm G, ACFoam 111, ENRGY 3,
CR-20
Roof Board
CR-20
CA2
None
CA2, APP-CA1
-127.5
gypsum plank deck
Polytherm H, H-Shield or Multi -Max FA3
Existing, sound
Min. 1-inch ENRGY 3, Polytherm H, H-
Min. 0.25-Inch Dens Deck Prime or
SBS-CA3,
SBS-CAI,SBS-
G-25
poured gypsum or
Shield, Multi -Max FA3
CR-20
SECUROCK Gypsum -Fiber Roof Board
I CR-20
CA2
None
CA2
-232.5
gypsum plank deck
System
Deck
TABLE 68: GYPSUM DECKS — REROOF
SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET,
AnchorSheet 6 A
,BaAe 11 sulatl
(TEAR -OFF)
BONDED INSULATION, BONDED ROOF COVER
No.
(Note 1)
Type
Fasten
Attach
Type.. 1
Attach
f Type
:,httachlt.
B
� Base Pl'
Ply,,:' t Cap Oij 10sf)
9-Inch o.c. at
Min. 1.5-Inch Polytherm,
Min. 0.25-inch Dens Deck, Dens Deck
Existing, sound
Elastobase,
min. 4-Inch lap
ACFoam 11, Polytherm G,
Prime, SECUROCK Gypsum -Fiber Roof
(Optional)
poured gypsum
Elastobase
Trufast FM-75
and 18-Inch o.c.
ACFoam III, 15095+GL,
Hot
Board, Min. 0.75-inch Fesco Board
Hot
BP -AA,
BP -AA, SBS_
SBS-AA,
G-26
or gypsum
P, Polyglass
or FM-90 or
at two, equally
Polytherm H, H-Shleld,
asphalt
(homogeneous) or min. 0.5-Inch
asphalt
SBS-AA
AA, SBS-TA
SBS-TA,
-45.0*
plank deck
G2 Base
Twin Loc-Nails
spaced,
ENRGY 3, Polytherm or
Structodek High Density Fiberboard
orAPP7TA
APP-TA
staggered center
Multi -Max FA3
Roof Insulation
rows
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FIL1654-1123
Certificate of Authorization #32455 6'" EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nierninen, PE-59166 Polyglass Modifled Bitumen Roof Systems; (954) 233-1330 Appendix 1, Page 59 of 65
ONEMOletc.
System Deck
- -TdP Insulation layer,:.
i
r "; � z �RooPCover (Note iSf' �f. *', M"" `:. '
`
Base Insulation Layer
MOP'(psf)'
No. (Note 1)
Type
Fasten.
>Attath .,
Base Ply
Ply
Cap Ply
Existing sound
(Optional) One or more
Min. 0.25-Inch Dens Deck, Dens Deck Prime or
Trufast Twin Loc-
1 per 2
(Optional if
(Optional if using AA Base)
SBS-AA,
G-27 poured gypsum or
layers, any combination,
SECUROCK Gypsum -Fiber Roof Board or min. 0.5-Inch
Nails (min. 1-Inch
ft'
using AA Ply)
BP -AA, SBS-AA, SBS-TA or
SBS-TA, -45.0-
I
gypsum plank deck
loose laid
Structodek High Density Fiberboard Roof Insulation
embedment)
BP -AA, SBS-AA
APP-TA
APP-TA
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization R32455 6TM EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 1O/08/4018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233-1330 1 Appendix 1, Page 60 of 65
L
i
N EMo I etc.
TABLE 7A: RECOVER APPLICATIONS
SYSTEM TYPE A-1: BONDED INSULATION, BONDED ROOF COVER
System Substrate _ Base Insuletlohlayer , • . 1 i'n < To ` ` L " ' '- " ' r"„ pinsulation'LayeY - e r ,?{ ` 1`ti`rRoaf [over; ryote,l5 is-" *r„" 'r ,,,",.1 r
-
No:
(Notes 3'& 12)
-
"Type . Attach ' ,Type i
,`'Attach i,
'�%18ase Ply„-f _ "� ` '{ PIYi'.�:'+, „..'
<y.-�'. ,tap PIY , _ ; ;a(Psfl%Iw
.• ... .,FF = - ^ f LA L ✓ ti. 4� Sn
�r
'W t:+t
'+�
f'. � w
5°,7 *,!
v xt
-
(Optional) additional layers(s) of base Insulation
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
R-1
Existing asphaltic roof
Min. 1.5-Inch Multi -Max FA3
D-IS
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
D-IS
SBS-SA
-67.5
Roof Board or Dens Deck Prime
TA, APP-TA
SBS-TA, APP-TA
(Optional) additional layers(s) of base insulation
Polyflex SA
R-2
Existing asphaltic roof
Min. 1.5-Inch Multl-Max FA3
D-15
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
D-IS
(Optional) APP-TA.
APP-TA
-67.5
Roof Board or Dens Deck Prime
Base
Min. 1.5-Inch Polytherm, ACFoam 11,
(Optional)SBS-SA, SBS-
SBS-SA, APP-SA,
R-3
Existing asphaltic roof
ENRGY 3 or Multi -Max FA3 or min. 2.0 pcf
D-IS
Min. 0.25-inch Dens Deck Prime
D-IS
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-72.5
Insulfoam
R-4
Existing asphaltic roof
Min. 1.5-Inch min. 2.0 pcf Insulfoam
D-IS
(Optional) additional layers(s) of base insulation
D-15
SBS-SA
(Optional) SBS-SA
SBS-SA
-90.0
Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
R-5
Existing asphaltic roof
Min. 1.5-inch min. 2.0 pcf Insulfoam
D-IS
D-IS
SB5-SA
TA, APP-TA
SBS-TA, APP-TA
-90.0Board
R-6
Existing asphaltic roof
Min.1.5-Inch min. 2.0 pcf Insulfoam
D-IS
Min. 0.25-inch SECUROCK Gypsum -Fiber Roof
D-IS
SA
(Optional)APP-TA
APP-TA
-90.0
BoardMin.
Baseflex
1.5-Inch Polytherm, ACFoam II or
(Optional) additional layers(s) of base Insulation
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
R-7
Existing asphaltic roof
ENRGY3
D-IS
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
D-IS
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-90.0
Roof Board
Min. 1.5-Inch Polytherm, ACFoam ll or
(Optional) additional layers(s) of base Insulation
xSA
R-8
Existing asphaltic roof
D-IS
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
D-IS
(Optional)APP-TA
APP-TA
-90.0
ENRGY 3
Roof Board
Base
Base
Existing smooth- or
gmnule-surfaced asphalt
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-inch Dens Deck Prime, DEXcell FA
PalyRex SA
built-up roof or 5B5
ACFoam II, Polytherm G, ACFoam III,
D-IS
Glass Mat Roof Board or SECUROCK Gypsum-
D-IS
Base primed
None
SBS-SA, APP-SA
-93.8
modified bitumen or
Polytherm H or H-Shield
Fiber Roof Board
with PG300
existing granule -surfaced
PRIMER: PG300
APP modified bitumen
Min. 1.5-Inch Polytherm, ACFoam 11,
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
R-10
Existing asphaltic roof
ENRGY3, Polytherm H or H-Shield or min.
O13500
Min. 0.25-inch Dens Deck Prime
08500
5B5-SA
TA APP TA
SBS-TA, APP-TA
72.5
2.0 pcf Insulfoam
Existing smooth- or
granule -surfaced asphalt
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-inch Dens Deck Prime, DEXcell FA
Pol Iex SA
R-11
built-up roof SBS
ACFoam 11, Polytherm G, ACFoam III,
OB500
Glass Mat Roof Board or SECUROCK G
Gypsum-
OB500
Base primed
None
SBS-SA, APP-SA
-93.8
m en
modified bitumen
Polytherm H or H-Shield
Fiber Roof Board
with PG300
existing granule -surfaced
PRIMER: PG300
APP madi0ed bitumen
R-12
Existing asphaltic roof
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
OB500
(Optional) additional layers of base insulation
OBSOD
SBS-SA
(Optional) SBS-SA
SBS-SA
420.0
Min. 0.25-inch SECUROCK Gypsum -Fiber Roof
OB500
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-120.0
R-13
Existing asphaltic roof
Min. 1.5-Inch, min. 2.0 pcf Insulfoam
OB500
Board
I
TA, APP-TA
SBS-TA, APP-TA
NEMO ETC, LLC Evaluation Report P9290.02.08-1121 for FL1654-R23
Certificate of Authorization #32455 6T EDITION (2017) FBC NON-HVH2 EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233-1330 Appendix 1, Page 61 of 65
ONEMOjetc.
TABLE7A:
RECOVER APPLICATIONS
SYSTEMTYPEA-1:
BONDED INSULATION, BONDED ROOF COVER
System
Substrates
Base'Insulatibn LaYeF {'r' "`
b r,(,«`.'i'I?N, 4.r;Top'Iniulet(on
No..
(Notes l&12)
- Type
.Attach
_Type,
Attach-�?.'Baie
P1Y..
Ply�r� ;_;Capp(y, ,;
R-14
Existing asphaltic roof
Min. 1.5-Inch, min. 2.0 pcf lnsulfoam
OB500
MIn.0.25-inch SECUROCK Gypsum -Fiber Roof
OBS00
Polyflex SA
(Optional)APP-TAAPP-TA
-120.0
Board
Base
Min.1.5-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base Insulation
(Optional) SBS-SX1BS-
SBS-SA, APP-SA,
R-15
Existing asphaltic roof
ENRGY 3, Polytherm H or H-Shield
08500
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
OB500
SBS-SA
TA APP-TA
SBS-TA, APP-TA
-127.5
Roof Board
MIn. 1.5-Inch Polytherm, ACFoam Il,
(Optional) additional layers(s) of base insulation
PolyFlex SA
R-16
Existing asphaltic roof
ENRGY 3, Polytherm H or H-Shield
OBS00
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
OB500
Base
(Optional)APP-TA
APP-TA
-127.5
Roof Board
R-17
Existing asphaltic roof
MIn.1.5-Inch Polytherm, ACFoam II,
M-OSFA
Min. 0.25-Inch Dens Deck Prime
M-OSFA
SBS-SA
(Optional) SBS-SA,�ISBS-
SBS-SA, APP-SA,
72 5
ENRGY 3, H-Shield or Multi -Max FA3
TA, APP-TA
SBS-TA, APP-TA
Existing smooth- or
granule -surfaced asphalt
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-Inch Dens Deck Prime, DEXcell FA
PolyFlex SA
R-18
built-up roof or SBS
ACFoam II, Polytherm G, ACFoam III,
M-OSFA
Glass Mat Roof Board or SECUROCK Gypsum-
M-OSFA
Base primed
None
SBS-SA, APP-SA
-93.8
modified bitumen
Polytherm H or H-Shield
�
or M-PG3
Fiber Roof Board
or M-PG3
with PG100
aced
existing granule -surfaced
PRIMER: PG300
APP modified bitumen
Min. 1.5-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base Insulation
(Optional) SBS-SA,SBS•
SBS-SA, APP-SA,
R-19
Existing asphaltic roof
ENRGY 3, H-Shleld or Multi -Max FA3
M-OSFA
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
M-OSFA
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-157.5
Roof Board
MIn. 1.5-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base insulation
Polytlex SA
R-20
Existing asphaltic roof
ENRGY 3, H-Shield or Multi -Max FA3
M-OSFA
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
M-OSFA
Base
(Optional) APP-TA
APP-TA
-157.5
Roof Board
Min. 1.5-Inch min. 2.0 pcf lnsulfoam,
Min. 2-Inch Polytherm, ACFoam II, min.
R-21
Existing asphaltic roof
1.5-Inch Ultra -Max or Multi -Max FA-3,
CR-20
Min. 0.25-Inch Dens Deck Prime
CR-20
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
72 5
min. 1.3-Inch Polytherm G, ACFoam III or
TA, APP-TA
SBS-TA, APP-TA
min.1.0-inch IS095aGL, Polytherm H, H-
Shleld, H-Shield CG or ENRGY 3
Existing smooth- or
granule -surfaced asphalt
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-inch Dens Deck Prime, DEXcell FA
Polyflex SA
R-22
built-up roof or 50S
ACFoam II, Polytherm G, ACFoam III,
CR-20
Glass Mat Roof Board or SECUROCK Gypsum-
CR-20
Base primed
None
SBS-SA, APP-SA
-93.8
modified bitumen or
Polytherm H or H-Shield _ _
Fiber Roof Board
with PG300
existing granule -surfaced
-
_
PRIMER: PG300
APP modified bitumen
-CR-20
R-23
Existing asphaltic roof
Min.1.5-Inch min. 2.6 pcf lnsulfoam
(Optional) additional layers(s) of base Insulation
CR-20
SBS-SA
(Optional) SBS-SA
SBS-SA
-240.0
Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
(Optional) SBS-SA,,SBS-
SBS-SA, APP-SA,
R-24
Existing asphaltic roof
MIn.1.5-Inch min. 2.0 pcf lnsulfoam
CR-20
Board
CR-20
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
240 0
MEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 fim EDITION (2017) FBC NON-HVHZ EVALUATION. Revision 21: 30/08/0_018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems, (954) 233-1330 Appendix 1, Page 62 of 65
rYm
Min. 1.5-Inch Ultra -Max or Multi -Max FA-
(Optional) additional layers(s) of base Insulation
R-25
Existing asphaltic roof
3, min. 1.3-Inch Polytherm G, ACFoam III
CR-20
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
CR-20
SBS-SA
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
-240.0
or min. 1.0-Inch ISO 95+GL, Polytherm H,
Roof Board
TA APP TA
SBS-TA, APP-TA
H-Shleld, H-Shield CG or ENRGY 3
Min. 1.5-Inch Ultra -Max or Multi -Max FA-
(Optional) additional layers(s) of base Insulation
R-26
Existing asphaltic roof
3, min. 1,3-Inch Polytherm G, ACFoam III
CR-20
an min. 0.25-Inch SECUROCK Gypsum -Fiber
CR-20
Polyflex SA
(Optional) APP-TA
APP-TA
-240.0
or min.l.0-Inch ISO 95+GL, Polytherm H,
Roof Board
Base
H-Shleld, H-ShIeId CG or ENRGY 3
Min. 2-Inch Polytherm, ACFoam II,
(Optional) additional layers(s) of base insulation
(Optional) SBS-SA, SBS-
SBS-SA, APP-SA,
R-27
Existing asphaltic roof
ENRGY-3, Polytherm H of H-ShIeId
CR-20
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
CR-20
SBS-SA
TA, APP-TA
SBS-TA, APP-TA
-247.5
Roof Board
(Optional) additional layers(s) of base Insulation
Polyflex SA
R-28
Existing asphaltic roof
Min. 2-Inch Polytherm, ACFoam II,
CR-20
and/or min. 0.25-Inch SECUROCK Gypsum -Fiber
CR-20
(Optional) APP-TA
APP-TA
-247.5
ENRGY-3, Polytherm H or H-Shield
Roof Board
Base
. . ., t )'Y •'i #Ytsf\� �R �.
t
2 I.Y'fJ ly4 t2- /.i.iN�.e'?"'i-xe-.'YtiNi.
�i:l•..'9..
44n t' y^ Q
'3,_ ilY¢�NKi*y'�f'..f.5 4N.,'r.+i
t .':�t 1.1 �'�f`4fi..
'AiPRALTOR'TORCH APPBED BASE:', r k � , 4: - N- c
f1 ,s, tt -, .{
i•rF�.i,f'at.Y4W;Y :M1i.:54:�-'Lt4v'�'8'`{,f'4R 15A�3Si{.::1'.
Min. 0.25-Inch Dens Deck, Dens Deck Prime or
BP -AA, SBS-
(Optional) BP -AA, SBS-
SBS-AA, SBS-TA
R-29
Existing asphaltic roof
Min. 1.5-Inch Multi -Max FA3
D-IS
SECUROCK Gypsum -Fiber Roof Board
D-I5
AA, SBS-TA,
AA SBS-TA or APP-TA
or APP-TA
-67.5
APP-TA
Min. 1.5-Inch Polytherm, ACFoam II or
Min. 0.25-Inch Dens Deck, Dens Deck Prime or
D-IS
BP -AA, SBS-
A TA,
(Optional) BP -AA, SBS-
SBS-AA, SBS-TA,
-90.0
R-30
Existing asphaltic roof
ENRGY 3 or min. 2.0 pcf lnsulfoam
D-IS
SECUROCK Gypsum -Fiber Roof Board
AP -TA
PP -TA
AA SBS-TA or APP-TA
orAPP-TA
Min.1.5-Inch Polytherm, ACFoam II,
Min. 0.25-Inch Dens Deck, Dens Deck Prime or
OB500
BP-AA,SBS-
AA, SBS-TA,
(Optional) BP-AA,'.SBS-
SBS-AA, SBS-TA,
-127.5
R-31
Existing asphaltic roof
ENRGY 3, H-Shleld or IS095+GL
OB500
SECUROCK Gypsum -Fiber Roof Board
APPTA
AA, SBS-TA or APP-TA
or APP-TA
Polytherm, ACFoam II,
Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
M-OSFA
BP -AA, SBS-
AA, SBS-TA,
(Optional) AA, SBS-
SBS-TA,
SBS-AAor
-157.5
R-32
Existing asphaltic roof
ENRGY 3, H-Shleld or Multi -Max FA3
ENRGY
M-OSFA
Board
APP-TA
or
�• SBS-TA or APP-TA
APP-,
or APP-TA
Min. 1.5-inch Ultra -Max or Multi -Max FA-
3, min. 1.3-Inch Polytherm G, ACFoam III
Min. 0.25-inch SECUROCK Gypsum -Fiber Roof
BP -AA, SBS-.
(Optional) BP -AA, SBS-
SBS-AA
-225.0
R-33
Existing asphaltic roof
or min. 1.0-Inch IS095+GL, Polytherm H,
CR-20
Board
CR-20
AA
AA
H-Shield, H-Shleld CG or ENRGY 3 or min.
2.0 pcf lnsulfoam
Min. 1.5-Inch Ultra -Max or Multi -Max FA-
3, min. 1.3-Inch Polytherm G, ACFoam III Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
CR-20 APP-TA (Optional)APP-TA
APP-TA -232.5
R-34 Existing asphaltic roof or min.l.0-Inch ISO 95+GL, Polytherm H, CR-20 Board
H-Shield, H-Shield CG or ENRGY 3 or min.
2.0 pcf lnsulfoam
- ..f-; ,,.._..,� sr;�f f-r. >f 'd.n, z*�?fAk`vf ',.C✓. ,,i �'H><N
.ftJ b'Y^s f_Js.tS rt. �a?7te'�'"k„`''�,.6�0.dr �`f;n�,�f"�,y,�:vt'u�*���y,
'K�'''s'�'°.+.�:Z�.
-s::..... .. �« ,+'=.xi'A,�'f> .x,p�YrNPc:`'r�4S��'J3"s3slf,
�ICOLO APPLIEb ASE: ri -
MEMO ETC, LLC Evaluation Report P9290.02.08-R21 for F1.3654-1123
Certificate of Authorization N32455 6" EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nleminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 63 of 65
ONEMOjetc.
7A: RECOVER APPLICATIONS
SYSTEM TYPE A-1:
BONDEDTABLE
INSULATION, BONDED ROOF COVER
System
Substrate"
latlon Layer j
+ 7
No.
Notes 3 & 32
( )
- "
Type, -i Attach
` Type "- j%'Attach -�
'
"' -_ Base PIYP PIY ' _;
"( tt
af. ps0.G
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-Inch Dens Deck Prime, DEXcell FA
SBS-CAS,
(Optional) SBS-CA1,
SBS-CA1, SBS-
R-35
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,.
D-IS
Glass Mat Roof Board or SECUROCK Gypsum-
D-IS
58S-CA2
SBS-CA2
CA2, APP-CA3
-90.0
ENRGY 3, Polytherm H or H-Shield
Fiber Roof Board
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
ACFoam II, Polytherm G, ACFoam III,
DEXcell FA Glass Mat Roof Board, SECUROCK
EnergyGuard Polyiso Insulation, ENRGY 3,
M-OSFA,
Gypsum -Fiber Roof Board or SECUROCK Glass-
M-OSFA
SBS-CA3,
(Optional) SBS-CA3,
SBS-CA3, SBS-
R-36
Existing asphaltic roof
Polytherm H, H-Shield ISO 95+GL, Multi-
M-PG3
Mat Roof Board, min. 7/16-Inch DEXcell Cement
or M-PG3
SBS-CA2
SBS-CA2
CA2, App-Cp1
-120.0
Max Aos
Roof Board or min. 0.5-Inch SECUROCK Cement
or DECaxormilusn.
inch DECKMATE Plus or DECKMATE Plus
DECKMATE
Roof Board
FA
(Optional) Min. 1-Inch Polytherm or
ACFoam 11, Polytherm G, ACFaam III,
Min.0.25-inch Dens Deck Prime or DEXcell FA
EnergyGuard Polyiso Insulation, ENRGY 3,
M-OSFA,
Glass Mat Roof Board, min. 7/16-Inch DEXcell
M-OSFA,
SBS-CA3, SBS-
R-37
Existing asphaltic roof
Polytherm H, H-Shield, ISO 95+GL, Multi-
M-PG3
Cement Roof Board or min. 0.5-Inch SECUROCK
M-PG3
SBS-CAI
None
CA2 APP CAS
-127.5
Max FA3, RESISTA or UltraMax or min. 2-
Cement Roof Board
Inch DECKMATE Plus or DECKMATE Plus
FA
(Optional) Min. 1-inch Polytherm or
ACFoam II, Polytherm G, ACFoam III,
EnergyGuard Polyiso Insulation, ENRGY 3,
M-OSFA,
Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
M-OSFA,
SBS-CA3,
SOS-CA3, SBS-
R-38
Existing asphaltic roof
Polytherm H, H-Shield, ISO 95+GL, Multi-
M-PGS
Board
M-PG3
SBS-CA2
None
APP-CA1
-327.5
Max FA3, RESISTA or UltraMax or min. 2-
Inch DECKMATE Plus or DECKMATE Plus
FA
(Optional) Min. 1-Inch Polytherm or
Min. 0.25-Inch Dens Deck, Dens Deck Prime,
ACFoam Ia Polytherm G, ACFoam III,
DEXcell FA Glass Mat Roof Board, SECUROCK
EnergyGuard Polyiso Insulation, ENRGY 3,
M-OSFA,
Gypsum -Fiber Roof Board or SECUROCK Glass-
M-OSFA,
SBS-CA3,
SBS-CA3, SBS-
R-39
Existing asphaltic roof
Polytherm H, H-Shield, ISO 95+GL, Multi-
M-PG3
Mat Roof Board, min. 7/16-Inch DEXcell Cement
M-PG3
505-CA2
None
�2
-157.5
Max FA3,MATEAor
Roof Board or min. 0.5-Inch SECUROCK Cement
or DECaxormin.2-
Inch DECKMATE Plus or DECKMATE Plus
Roof Board
FA
(Optional) Min. 1-Inch Polytherm,
Min. 0.25-Inch Dens Deck Prime, DEXcell FA
R-00
Existing asphaltic roof
ACFoam 11, Polytherm G, ACFoam III,
OB500
Glass Mat Roof Board or SECUROCK Gypsum-
OBS00
SBS-CA3,
(Optional) SBS-CA3,
SBS-CA3, SBS-
-120.0
ENRGY 3, Polytherm H, H-Shield or Muld-
Fiber Roof Board
SBS-CA2
SBS-CA2
CA2, APP-CA1
Max FA3
(Optional) Min. 1-Inch Polytherm,
R-01
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,
0B500
Min. 0.25-Inch Dens Deck Prime or DEXcell FA
OB500
SBS-CAS
None
SBS-CA3, SBS-
ENRGY 3, Polytherm H, H-Shield or Multi-
Glass Mat Roof Board
CA2 APP CA1
Max FA3
NEMO ETC, LLC Evaluation Report P9290.02.08-1121 for FL365423
Certificate of Authorization #32455 bra EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 64 of 65
N"S
MEMO etc.
TABLE7A:
RECOVER APPLICATIONS
SYSTEM TYPE A-1:
BONDED INSULATION, BONDED ROOF COVER
System
Substrate
Base Insulation Layer. -
' Top Insulatian Layer` ^''
; ^ ;Roof Gover,�Note 15) - +, {. s
+e�'ryjDP'
No.
(Notes 1 & 12)
Type
Attach-'
_ Type -'
'Attach
:,:Baseply'.
'' PIY
:Cap PIY
I+(psf);
(Optional) Min. 1-Inch Polytherm,
R-42
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,
OB500
Min. 0.25-Inch SECUROCK Gypsum -Fiber Roof
OB500
SBS-CAI,
None
SBS-CA3, SBS-
-127.5
ENRGY 3, Polytherm H, H-Shield or Multi-
Board
SBS CA2
CA2 APP CA3
Max FA3
(Optional) Min. 1-Inch Polytherm,
R-43
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,
CR 20
Min. 0.25-Inch Dens Deck Prime or SECUROCK
CR 20
SBS-CA3,
(Optional) SBS-CAI,
SBS-CA3, SBS-
-120.0
ENRGY 3, Polytherm H, H-Shleld or Multi-
Gypsum -Fiber Roof Board
SBS-CA2
SBS-CA2
CA2, APP-CAI
Max FA3
(Optional) Min. 1-Inch Polytherm,
R-44
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,
CR 20
Min. 0.25-Inch Dens Deck Prime or DEXcell FA
CR-20
SBS-CA3
None
SBS-CAI, SBS-
-127.5
ENRGY 3, Polytherm H, H-Shield or Multi-
Glass Mat Roof Board
CA2, APP-CA3
Max FA3
(Optional) Min. 1-inch Polytherm,
R-45
Existing asphaltic roof
ACFoam II, Polytherm G, ACFoam III,
CR 20
Min. 0.25-inch SECUROCK Gypsum -Fiber Roof
CR-20
SBS-CA3,
None
SBS-CAI, SBS-
-127.5
ENRGY 3, Polytherm H, H-Shield or Multi-
Board
SBS-CA2
CA2, APP-CA3
Max FA3
(Optional) Min. 1-inch ENRGY 3,
Min. 0.25-Inch Dens Deck Prime or SECUROCK
SBS-CA3,
SBS-CA3, SBS-
R-46
Existing asphaltic roof
Polytherm H, H-Shleld, Multi -Max FA3
CR-20
Gypsum -Fiber Roof Board
CR-20
5B5-CA2
None
CB
-232.5
NEMO ETC, LLC Evaluation Report P9290.02.08-R21 for FL1654-R23
Certificate of Authorization #32455 6m EDITION (2017) FBC NON-HVHZ EVALUATION Revision 21: 10/08/2018
Prepared by: Robert Nieminen, PE-59166 Polyglass Modified Bitumen Roof Systems; (954) 233.1330 Appendix 1, Page 65 of 65