HomeMy WebLinkAboutPOOLGUARD MANUALoolguard'
............
OPERATING INSTRUCTIONS SCBY
MANUAL St. Lucie County
"MEETS REQUIREMENTS OF ASTM SAFETY SPECIFICATION F 2208"
ASTM F 2208
kUl
S
SO"S«+h.
ti
MODEL PGRM - 2 85dB Horn at 10 Feet
This product has been designed to aid in the detection of unwanted intrusions into
unsupervised pools. POOLGUARD IS A SAFETY ALARM SYSTEM AND NOT A
LIFE SAVING DEVICE. `This device is not intended to replace any other safety
consideration-_i.e., adult supervision, lifeguards, fences, gates, pool covers; locks, etc.,
and some devices may not detect gradual entry."
GENERAL
POOLGUARD is the result of quality design and manufacturing techniques
that are a standard at PBM Industries, Inc.; a company dedicated to high
quality products. POOLGUARD is a result of that dedication and we
guarantee and stand behind the POOLGUARD alarm system. POOLGUARD
Pool Alarms have been tested and comply to the ASTM Safety and Performance
Standard for Pool Alarms, ASTM F 2208, see insert.
POOLGUARD is an electronic monitoring system that automatically
sounds an alarm when children or pets fall into your unsupervised pool.
POOLGUARD is a portable, self-contained, lightweight unit that is safe
and simple to operate. Entry into the pool will be detected by the units
electronic sensor, triggering a loud pulsating alarm and an internal RF
transmitter. The remote receiver will receive the transmitted signal and
sound an alarm within the home.
INSPECTION
POOLGUARD is packaged in a shipping carton that minimizes the chance
of damage due to handling. Check for damage and confirm that the con-
tents of the carton include the following items:
• POOLGUARD Unit
• Handle
• Red Reset/Sleep Key
• Remote Receiver and Power Supply
• Operating Instructions Manual
If an item is missing, contact either the place of purchase or PBM
Industries, Inc. for replacement.
CARE AND HANDLING
POOLGUARD is constructed from sturdy plastic to withstand the adverse moisture
environment of a swimming pool. Care needs to be taken when handling to ensure
against being dropped, kicked, etc. ALWAYS REMOVE THE POOL UNIT FROM
THE POOL WHEN THE POOL IS BEING USED. STORE THE ALARM IN THE
UPRIGHT POSITION (See Figure 1) AWAY FROM POOL ACTIVITY. If the pool
unit accidentally falls into your pool, remove it immediately and drain the water
from it. Take the pool unit apart as indicated in the Battery Installation/Replacement
section and remove the battery. Remove all the water from the inside of the unit,
the battery and the circuit board area with a paper towel or cloth. Completely test
the alarm before each use as described in the manual to ensure proper operation.
PAI ITIGIRI. Vcc1'f ' s mr � ___ _ ___ _ - _ _