HomeMy WebLinkAboutAMERICAN TEST LAB OF SOUTH FLORIDA PAPERWORKFROM ': Vero Glass & Mirror Office
FAX NO. : 7725621474
Jun. 22 2004 09:48RM P3
4.
, of Spath Hod&
leud¢r&k F133309
Fax (954) 973-0a?3
BY
Page 1 of 9
ATL Report # 1129,01-01 DC Note # ATL 01026 Date: 01/11/02
ATL Certification # 01-0516.16
Test Dates: 11/28, i 1/29, 12/10, 12/11/01
Test Requested By - James Evans, Kawneer Company, Inc., $55 Guthridge Court, Norcross,
Georgia 30092_ Phone (770) 449-55$5, Fax (770) 734-1560.
I
Tests uilucted: DCBCCO PA 201-94, PA 202-94, PA 203-94.
Qualifying: ASTM E 330, E 1896-97 and SBCCI SSTD 12-99
P.29Z Pt U9M5--- Specimens A, C, D: + 65.0 psf, - 65.0 psf (PA 201. PA 203)
1 Specimen E: + 60.0 psf, - 65.0 psf (PA 202)
(I) DESCRIPTION OF UNIT -
AIR
Model be9ip anon - Kawneer IR 5o0 System with 0.09V Solutia Saflex® and Dupont Butacitee PVB
interlopers, as per Kawneer Architectural drawing No. T575-80% pages 1 through 6, dated 12/12r0I and
component drawings.
Overall Sae - 146-3/4" wide x 114" high x 5" deep
90 snratig28 - Three panels wide with 2 fixed liter each.
(2)MATERIAL CHARACTERISTICS: `Y�• _
F e a1- Extruded 6063-T5 aluminum alloy
Frame Construction - Flame members were all square cut. The jambs and intermediate vertical mullions
tan through with butt joints. The heads, sills and intermediate horizontal mullions have internal
Screw splines and were attached to the jambs and intermediate vertical mullions with (3) # 12 x e1/4" ss emnded
hex washer head sms, at each connection The left intermediate vertical mullion consis3Gd of a tubular open
back section (pan # 575-013) (2.500" x 5" x 0.090" typical wall thickness) and a solid snap -in pocket filter
(part # 575-002) (0.845" x 4.656" x 0.090" typical wall thickness). The right intermediate vertical
expansion mullion consisted of a tubular section (male half) (part # 575-009) (2.093" x 5" x 0.090" typical
wall thickness) and a tubular section (female half) (part # 57S-010) (1.303" x 5" x 0.090" typical wall
thickness). The jambs consisted of a solid section (part # 575-001) (2.500" x 5" x 0.090" typical wall
thickpes5l Bead consisted of a solid section (part # 575-012) (2,500" x 4.952" x 0.090" typical wall
thickness). Sill consisted of a tubular section (part # 575-006) (2.500" x 4.952" x 0.09(y" typical wall
thickness) with stops (part # 575-004) (1.543" x 1.933" x 0.075" typical wall thickness). An extruded
aluminum `IT flashing (part # 575-037) (2.594" x 5.250" x 0.080" typical wall thickness) ran continuous
FROM': Vero Glass & Mirror Office FAX NO. : 7725621474 Jun. 22 2004 09:47RM P2
96433 48
1027
l'unericen lest Lab of South Florida
6795 NWd 17 Avenue F1 Lauderdale FI 33309
7hona C954) 973-0808 Fox C954) 973-0823
gab-v^ww.&d!d_com eMaH-info0at¢.com
Page i of 9
ATL Report # 0502.01-02 DC Note # ATL 02028 Date: 06/18/02
ATL Certification # 01-0516.16
Test Dates: 5/2, 5114, 6/15,
6M102
Tests Requested By - James Evans, Kawneer Company, Inc_, 555 Guthridge Court,
Norcross, Georgia 30092, Phone (770) 449-5555, Fax (770) 734-1560
Tests Conducted - DCBCCO PA 201-94, PA 202-94, PA 203.94, (with
Qualifying: ASTM E 330, ASTM E 188"7, SBC
Design Pressures - + 65.0 psf, - 65.0 psf
(1) DESCRIPTION OF UNIT:
Model Designation Kawneer 6'-0" x 8'-0" Pair 350 Doors with 3-point Lock, Flushbolls and
TdFab 450 Framing, as per Kawneer drawing No. T200-801,
pages 1 - 7, dated 05/28/02 and component drawings.
QLre 11 Size - 75-112" wide x 97-3/4" high x 4-11T deep
Configuration - Pair of Doors
No. & Size of Doors - (2), 35-27132" wide x 95-3116" high
(2) MATERIAL CHARACTERISTICS:
Frame and OM NMderiial - Extruded Aluminum 16083-T5 alloy
Frame Construction - Frame members were all square out. The jambs ran through with butt joints
at the head and threshold. Jambs consisted of a tubular section (part # 450-018) (4.5W' x 1.750" x
0.0W typicallwall thickness). The head consisted of a tubular section (part # 460-020) (4.452" x
t .750° x 0.125" typical wall thickness). At the sill there was an extruded aluminum threshold (part #
69-139) (4.000" x 0.500" x 0.126" typical wall thickness). The frame jamb ran through while the
threshold was square cut, butted and mechanically fastened to each frame jamb using: On
-specimens C and D, one (1) jamb pivot assembly (part # 035-523.LH and 035-524 RH). Each pivot
assembly was secured to the frame jamb using three (3) #12 24 x 618" FHMS (part # 028-350)_ The
threshold was then placed over the pivot assembly and secured to the pivot assembly using two (2)
#12-24 x 3/8" FHMS (part # 028445)., On specimens B and E, one (1) steel plated comer dip (part #
049-896). Each dip was secured to the frame jamb using three (3) # 12-24 x 318" FHMS