HomeMy WebLinkAboutEVALUATION REPORTEXTERIOR RESEARCH & DESIGN, LLC.
Certificate of Authorization #9503
TRINITY I ERD SCANNED 353 CHRISTIAN STREET, UNIT 478
Il H1HIVE>�J OXFORD, CT 06478
BY PHONE: (203) 262-9245
EVALUATION REPORT St. LucieCounti FAX: (203) 262-9243
GAF Evaluation Report 01506.01.08-R11
1361 Alps Road, Building 7-3. FL10124-Rg
Wayne, N3 07470 Date of Issuance: 01/03/2008
Revision 11: 02/26/2013
SCOPE:
This Evaluation Report is issued under Rule 9N-3 and the applicable rules and regulations governing
the use of construction materials in the State of Florida. The documentation submitted has been
reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code and
Florida Building Code, Residential Volume. The products described herein have been designed to
comply with the 2010 Florida Building Code sections noted herein.
DESCRIPTION: GAF Asphalt Roof Shingles
LABELING: Each unit shall bear labeling in accordance with the requirements the Accredited Quality
Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s)
changes, the referenced Quality Assurance documentation changes, or provisions of the Code that
relate to the product change. Acceptance of this Evaluation Report by the named client constitutes
agreement to notify Robert Nieminen, P.E. if the product changes or the referenced Quality
Assurance documentation changes. Trinity[ERD requires a complete review of this Evaluation
Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "TrinitylERD Evaluated" may
be displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it
shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by
the manufacturer or its distributors and shall be available for inspection at the job site at the
request of the Building Official.
This Evaluation Report consists of pages 1 through 5.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The faalmlle seal appearing was authorized
by Robert Nleminen, P.E. on 02/26/2013
This does not serve as an electronically signed
document. Signed, sealed hardcopies have been
transmitted to the Product Approval Administrator and
to the named dlent
CERTIFI"nON OF INDEPENDENCE:
1. TrinitylERD does not have, nor does It Intend to acquire or will it acquire, a financial interest in any Company manufacturing or
distributing products It evaluates.
2. TrinitylERD Is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nleminen, P.E. does not have nor will acquire, a financial Interest In any company manufacturing or distributing products for which
the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial Interest In any other entity Involved in the approval process of the
product.
`J 1 R1Nff Y I ERD
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub -Category: Asphalt Shingles
Compliance Statement: GAF Asphalt Roof Shingles, as produced by GAF, have demonstrated
compliance with the following sections of the Florida Building Code and Florida Building Code,
Resldential Volume through testing in accordance with the following Standards. Compliance is subject
to the Installation Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section
Property
Standard
Year
1507.2.5, R905.2.4
Physical Properties
ASTM D3462
2007
1507.2.7.1, R905.2.6.1
Wind Resistance
ASTM D3161, Class F
2006
1507.2.7.1, R905.2.6.1
Wind Resistance
ASTM D7158, Class H
2O07
1507.2.7.1, R905.2.6.1
Wind Resistance
TAS 107
1995
3. REFERENCES:
Entity
Examination
Reference
Date
GAF (PDM 1915)
Letter of Equivalency
Seal -A -Ridge Impact Resistant IR
01/13/2012
PRI(TST 5878)
ASTM D3462
GAF-059-02-01
09/02/2004
PRI(TST 5878)
ASTM D3462
GAF-080-02-01
05/25/2005
PRI (TST 5878)
Wind Driven Rain
GAF-407-02-01
01/21/2013
UL (TST 1740)
ASTM D3462
93NK6295
11/29/1993
UL(TST 1740)
ASTM D3462
99NK43835
01/12/2000
UL (TST 1740)
TAS 107
94NK9632
03/29/2000
UL (TST 1740)
ASTM D3462
CINK06632
02/02/2001
UL(TST 1740)
ASTM D3161, TAS 107
01NK9226
05/21/2001
UL (TST 1740)
ASTM D3161
O1NK37122
12/18/2001
UL (TST 1740)
ASTM D3462
01NK37122
12/19/2001
UL (TST 1740)
ASTM D3161, TAS 107
02NK12980
04/10/2002
UL(TST 1740)
ASTM D3161, TAS 107
02NK30871
09/09/2002
UL (TST 1740)
ASTM D3161
03CAS367
03/11/2003
UL (TST 1740)
ASTM D3462
03NK26444
10/17/2003
UL (TST 1740)
ASTM D3462
04NK13850
06/07/2004
UL (TST 1740)
ASTM D3161
04NK13850
06/23/2004
UL (TST 1740)
ASTM D3161
04NK30546
03/10/2005
UL (TST 1740)
ASTM D3462
04NK22009
05/06/2005
UL (TST 1740)
ASTM D3161
04NK22009
05/09/2005
UL (TST 1740)
ASTM D3462
05NK27924
02/10/2006
UL (TST 1740)
ASTM D3161
OSNK27924
02/11/2006
UL (TST 1740)
ASTM D3161, D3462
06CA18077
06/05/2006
UL(TST 1740)
ASTM D3161, D3462
06CA18074
06/16/2006
UL(TST 1740)
ASTM D3161, D3462
06CA35251
10/18/2006
UL (TST 1740)
ASTM D3462
06CA31603
12/01/2006
UL(TST 1740)
ASTM D3161, D3462
06CA41095
12/27/2006
UL (TST 1740)
ASTM D3161
07NK05228
03/13/2007
UL (TST 1740)
ASTM D3161
06CA31611
04/04/2007
UL (TST 1740)
ASTM D3161
06CA61148
04/09/2007
UL (TST 1740)
ASTM D3161, D3462
07CA31742
11/08/2007
UL (TST 1740)
ASTM D3161, D7158, D3462
OBCA06100
03/13/2008
UL(TST 1740)
ASTM D3161, D3462
07CA55908
04/01/2008
UL(TST 1740)
ASTM D3161, D3462
09CA10592
03/26/2009
UL (TST 1740)
ASTM D3161, D3462
09CA06856
05/15/2009
UL (TST 1740)
ASTM D3161, D7158, D3462
09NK06647
08/01/2009
UL (TST 1740)
ASTM D3161, D7158, D3462
09CA27281
08/27/2009
UL(TST 1740)
ASTM D3161, D7158, D3462
10CA355S4
03/05/2010
UL (TST 1740)
ASTM D3161, D7158, D3462
IOCA13686
05/15/2010
UL (TST 1740)
ASTM D3462
IOCA07264
05/27/2010
UL(TST 1740)
ASTM D3462
IOCA11953
10/29/2010
UL (TST 1740)
ASTM D3161, D7158, D3462
IONK11951
10/30/2010
UL (TST 1740)
ASTM D3161, D7158, D3462
10NK12070
11/04/2010
UL (TST 1740)
ASTM D3161, D7158, D3462
08CA06100
01/30/2010
Exterior Research and Design, LLC. Evaluation Report 01506.01.08-R31
Certificate of Authorization #9503 FL10124-119
Revision 11: 02/26/2013
Page 2 of 5
4.
Entity
UL (TST 1740)
UL (TST 1740)
UL (TST 1740)
UL (TST 1740)
UL (TST 1740)
UL, LLC. (TST 9628)
UL, LLC. (TST 9628)
UL, LLC. (QUA 9625)
UL, LLC. (QUA 9625)
Examination
ASTM D3161, D7158, D3462
ASTM D3161, D7158, D3462
ASTM D3161, D7158, D3462
ASTM D3161, D7158, D3462
ASTM D3161, D7158, D3462
ASTM D3462
ASTM D3161, D7158, D3462
Quality Control
Quality Control
"-JT INIIYjERD
Reference
Date
10CA53934
03/31/2011
IICA48924
10/22/2011
11CA47919
12/03/2011
11CA48408
12/08/2011
IICA48725
12/09/2011
12CA34891
10/12/2012
12CAS8151
02/15/2013
Inspection Report, File No. R21
08/08/2012
R3915
Current
PRODUCT DESCRIPTION:
4.1 Marquis WeatherMax, Royal Sovereign and Sentinel are a fiberglass reinforced, 3-tab asphalt
roof shingles.
4.2 Camelot, Camelot II / Camelot 30, Capstone, Country Mansion, Country Mansion II, Grand
Canyon, Grand Sequoia, Grand Sequoia IR, Grand Slate, Grand Slate II, Monaco, Sienna,
Timberline American Harvest, Timberline ArmorShield II, Timberline Natural Shadow, Timberline
Natural Shadow Arctic White, Timberline HD / Timberline Prestique 30, Timberline Prestique 40
/ Timberline Cool Series, Timberline Ultra HD / Timberline Prestique Lifetime, Timberline
Majestic / Timberline Majestic 30 and Woodland are fiberglass reinforced, laminated asphalt roof
shingles.
4.3 Slateline is a fiberglass reinforced, 5-tab asphalt roof shingle.
4.4 Seal -A -Ridge, Seal -A -Ridge Armorshield, Seal -A -Ridge IR, Ridglass 8, Ridglass 10, Ridglass 12
and Timbertex Hip and Ridge are fiberglass reinforced, hip and ridge asphalt roof shingles.
4.5 ProStart Starter Strip Shingles and WeatherBlocker Starter Strip Shingles are a starter strips for
asphalt roof shingles.
S. LIMITATIONS:
5.1 This Evaluation Report is not for use In the HVHZ.
5.2 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing
Materials Directory for fire ratings of this product.
5.3 Wind Classification:
5.3.1 All GAF shingles noted herein are Classified in accordance with FBC Tables 1507.2.7.1 and
R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are
acceptable for us in all wind zones up to Vasd = 150 mph (Vult = 194 mph). Refer to Section 6
for installation requirements to meet this wind rating.
5.3.2 All GAF hip & ridge shingles noted herein are Classified in accordance with FBC Tables
1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F, indicating the shingles are acceptable for
us in all wind zones up to Vasd = 150 mph (V„ it = 194 mph). Refer to Section 6 for installation
requirements to meet this wind rating.
5.3.3 Classification by ASTM D7158 applies to exposure category B or C and a building height of 60
feet or less. Calculations by a qualified design professional are required for conditions outside
these limitations. Contact the shingle manufacturer for data specific to each shingle.
5.4 All products in the roof assembly shall have quality assurance audit in accordance with the
Florida Building Code and F.A.C. Rule 9N-3.
Exterior Research and Design, I.I.C. Evaluation Report 01506.01.08-RIS
Certirwte of Authorization #9503 FL30124-R9
Revision 11: 02/26/2013
Page 3 of 5
�INIIY ERA
6. INSTALLATION:
6.1 Underlayment:
6.1.1 Underlayment shall be acceptable to GAF and shall hold current Florida Statewide Product
Approval, or be Locally Approved per Rule 9N-3, per FBC Sections 1507.2.3, 1507.2.4 or
R905.2.3.
6.2 Starter Shingles:
6.2.1 Installation of ProStart Starter Strip Shingles and WeatherBlocker Starter Strip Shingles shall
comply with the manufacturer's current published instructions.
6.3 Asphalt Shingles:
6.3.1 Installation of asphalt shingles shall comply with the manufacturer's current published
instructions, using minimum four (4) nails per shingle in accordance with FBC Sections 1507.2
or R905.2, with the following exceptions:
➢ Camelot, Camelot II / Camelot 30, Grand Slate II, Country Mansion II, Monaco and
Woodland require minimum five (5) fasteners per shingle
6.3.2 Fasteners shall be in accordance with manufacturer's published requirements, but not less than
FBC 1507.2.6 or R905.2.5. Staples are not permitted.
6.3.3 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of
fastening are required. Contact the shingle manufacturer for details.
6.4 Hip & Ridge Shingles:
6.4.1 Installation of Ridglass 8, Ridglass 10 and Ridglass 12 asphalt shingles shall comply with the
manufacturer's current published instructions with a minimum two (2) nails per side [total of
four (4) nails per shingle] and asphalt roofing cement.
6.4.2 Installation of Seal -A -Ridge, Seal -A -Ridge Armorshield and Seal -A -Ridge IR asphalt shingles
shall comply with the manufacturer's current published Instructions with a minimum two (2)
nails per shingle.
6.4.3 Installation of Timbertex Hip and Ridge asphalt shingles shall comply with the manufacturer's
current published instructions with a minimum two (2) nails per shingle and beads of
Sonneborn NP1 Gun Grade Polyurethane Sealant or Henkel PL Roofing and Flashing Sealant.
6.4.4 Fasteners shall be in accordance with the manufacturer's published requirements, but not less
than FBC 1507.2.6 or R905.2.5. Staples are not permitted.
7. LABELING:
7.1 Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and logo
of the Accredited Quality Assurance Agency noted herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications
detailed in FBC Table 1507.2.7.1 / R905.2.6.1.
S. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the
installation of this product.
Exterior Research and Design, I.I.C. Evaluation Report 01506.01.08-RSi
CertiRcate of Authorization #9503 FL10124-119
Revision 11: 02/26/2013
Page 4 of 5
J TRINITY ERD
9. MANUFACTURING PLANTS:
Contact the named QA entity for information on which plants produce products covered by Florida Rule
9N-3 QA requirements.
10. QUALITY ASSURANCE ENTITY:
UL LLC - QUA9625; (847) 664-3281
- END OF EVALUATION REPORT -
Exterior Research and Design, LLC. Evaluation Report 01S06.01.08-R11
Cert!/icate of Authorization #9503 FL30124-119
Revision 11: 02/26/2013
Page 5 of 5