HomeMy WebLinkAboutSOLAR MANUALThe new QYEAK DUO-G5 solar module from Q CELLS impresses thanks
to innovative Q.ANTUM DUO Technology, which enables particularly
high performance on a small surface. Q.ANTUM's world -record -holding
cell concept has now been combined with state-of-the-art circuitry
half cells and a six-busbar design, thus achieving outstanding perfor-
mance under real conditions — both with low -intensity solar radiation
as well as on hot, clear summer days.
Q.ANTUM TECHNOLOGY: LOW LEVELISED COST OF ELECTRICITY
� Higher yield per surface area, lower BOS costs, higher power
classes, and an efficiency rate of up to 19.9%. ST.LUCIE COUNTY
PLAN REVIEW
INNOVATIVE ALL-WEATHER TECHNOLOGY
Optimal yields, whatever the weather with excellent low-Iig1&DG:
and temperature behaviour. DATE:
a ENDURING HIGH PERFORMANCE E �y�
Long-term yield security with Anti LID Technology, Anti PIDDATE-/�,/�'f5
Technology', Hot -Spot Protect and Traceable Quality Tra.QT PLUMB:
EXTREME WEATHER RATING DATE:
High-tech aluminium alloy frame, certified for MECH:
high snow (5400 Pa) and wind loads (4000 Pa). DATE:
O A RELIABLE INVESTMENT
Inclusive 12-year product warranty and 25-year linear
performance warranty'.
STATE OF THE ART MODULE TECHNOLOGY
Q.ANTUM DUO combines c
bines cutting
ell separation
innovativeand with444 FfLE C®Py
THE IDEAL SOLUTION FOR: SCANNtL.
BY
Rooftop arrays on Rcommoatfoperarrays onciallindus[rial �St I iir;r rrienmf -
+� residential buntlines
buildings
I RESEARCH
e
A0001f5 pry,%eF m
a I fuaruewwry
puall[FTeeteE 0ID.�40032587
' APT test conditions according
to EMS 62804-1:2015,
method B (-150OV, 168 h)
2 See data sheet an rear
for further information.
Engineered in Germany
O CELLS
MECHANICAL SPECIFICATION
Formal 1685 mm x 1000 mm x 32 mm (including frame)
,maw,
Weight 18.7 kg - �°m..
Front Cover 3.2 mm thermally pre -stressed glass with
anti -reflection technology
r.
Back Cover Composite film
Frame Black anodised aluminium
Cell 6 x 20 monocrystalline 0.ANTUM solar half cells
r function box 70-85mm x 50-70 mm x 13-21 mm
Protection class IP67, with bypass diodes
O_
Cable 4mma Solar cable; (+)1300man. (-)1100mm
„„ were,
aihena,a^
Connector Multi -Contact, MC4, IP65 and IP68
ELECTRICAL CHARACTERISTICS
f POWER CLASS _ _
315
325_
330 I
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC'(POWER TOLERANCE+SW/-OW)
_ _320 _
_
1 Power at MPPI Parr [Wl
315
320
325
330 i
Short Circuit Current- l„ [A]
10.04
10.09
10.14
10.26
E� Open Cireuil Voltage• Vic IV]
39.87
40.13
40.40
40.66
Current at MPP• Ian [A]
9.55
9.60
9.66
9.71
-
Voltage at MPP• Vurr IV]
32.98
33.32
33.65
33.98
Efficiency' q [%]
z18.7
z19.0
z19.3
z19.6
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NOV
-at
i
t power MPPa Pan_ [W_]
237.2
240.9
244.6
_
e Short Circuit Current' lap [A]
_233.4
8.09
8.14
8.18
8.22
Open Circuit Voltage• Vac [V]
37.36
37.54
37.79
38.04
Current at MPP• Ian [A]
7.51
M6
7.60
7.64
Voltage at MPP• Van IV]
31.07
31.39
31.76
32.01
11000W/ma, 25°C. spectrum AM 1.5G aMeasurement tolerances STC z3%; NOC&5%
3800W/ma. NOCT, spectrum
AM Lea 'typical values, actual values may differ
Q CELLS PERFORMANCE WARRANTY
PERFORMANCE
AT LOW IRRADIANCE
-
i TEIv ERAT_URECOEFFICIENTS ,....
Temperature Coefficient of Is,
Temperature Coefficient of Parr
YEIAs
At least 98% of nominal power during
first year. Thereafter max. 0.54%
degradation per year. At least 93.I% of
nominal power up to 10 years. At leas(
85%of nominal power up to,
years.
All data within measurement tolerances.
Full warranties in accordance with the
warranty terms of the Q CELLS sales
organlsation of your respective country.
X no -T
__ _____ ;
>a aw we IRMIANDE(WWI
Typical module performance under low hradlance conditions In
comparison to STC conditions (25°C, 1000W/ma).
q [%/K] +0.04 Temperature Coefficient of Va, IS [%/K] -0.28
V [%/Kl -0.37 Normal Operating Cell Temperature NOCT ['CI 45
PROPERTIES ,. SYSTEM DESIGN
Maximum System Vallage Van IV] 1000 Safety Class_ II
Maximum Reverse Current la fAl -20 Fire Rating C
Push/Pull Load (Pal 5400/4000 Permitted Module Temperature -40°C up to +85"C
(Test -load In accordance with IEC 61215) On Continuous Duly
61215(Ed.2h IEC 61
with DIN EN 50380.
OVE C
NOTE: Installation instructions must be followed. See the Installation and operating manual or contact our technical service department for further Information on approved installation
and use of this product.
Hanwhe QCELLS GmbH
Sonnenallee 17-21, 06766 Bltterfeld-Wolfer, Germany I TEL+49 (0)3494 66 99-234441 FAX +49 (0)3494 66 99-230001 EMAIL sales®q-cells.com I WEB erww.q-celis.com
Engineered in Germany Q CELLS
Data Sheet
Enphase Microinverters
Region: AMERICAS
Enphase
IQ7and IQ7+
Microinverters
The high-powered smart grid -ready
Enphase IQ 7 Micro' and Enphase IQ 7+ Micro'
dramatically simplify the installation process while
achieving the highest system efficiency.
Part of the Enphase IQ System, the IQ 7 and
IQ 7+ Microinverters integrate with the Enphase
IQ Envoy', Enphase IQ Battery", and the Enphase
Enlighten"' monitoring and analysis software.
IQ Series Microinverters extend the reliability
standards set forth by previous generations and
undergo over a million hours of power -on testing,
enabling Enphase to provide an industry -leading
warranty of up to 25 years.
Easy to Install
Lightweight and simple
Faster installation with improved, lighter two -wire cabling
Built-in rapid shutdown compliant (NEC 2014 & 2017)
Productive and Reliable
Optimized for high powered 60-cell and 72-cell* modules
More than a million hours of testing
Class II double -insulated enclosure
UL listed
Smart Grid Ready
Complies with advanced grid support, voltage and
frequency ride -through requirements
Remotely updates to respond to changing
grid requirements
Configurable for varying grid profiles
Meets CA Rule 21 (UL 1741-SA)
-The IQ 7+ Micro is required to support 72-cell modules.
To lea n more about Enphase offerings, visit enphase.com n EN P HAS E.
Enphase IQ 7 and IQ 7+ Microinverters
INPUT DATA (DC)
IQ7-60-2-US / IQ7-60-B-US
IQ7PLUS-72-2-US / IQ7PLUS-72-B-US
Commonly used module pairings,
235 W- 350 W +
235 W - 440 W + j
___ __...___..__ll
Module compatibility
o____ _ _.. _ .
60-cell PV modules only
60-cell and 72-cell PV modules
j Maximum input DC voltage- � �-
4t3 V �
____.______
60 V ,
Peak power tracking voltage
_ _ _ _
27V-37V
_—__ __ _____. _ __
27V-45V
------_--- 9 `--- --- `- - - - - -- --
i0peratingrsn e _ _ _ _
- ------ -'_ - -- - ---- -
16,V-48V
_ _ ._ _ _ _
16V-60V - '
_ __
Min/Max start voltage
22 V / 48 V
22 V / 60 V
' Max-0C shortaircuitiurrent module Isc
15 A
15 A
Overvoltage class DC port
II
II
� DGp'ori backfeed current.
O A
O A i
__.___._____.. .-__._____.._.
PV array configuration
.. q____.-_
- 1 x 1 ungrounded array; No additional DC side protection required;
AC side protection requires max 20A per branch circuit
uun w.Yu ryuvo ..w .`.
Maximum continuous output power
240 VA
290 VA
Ngmirial(LL)voltagehange'--------W-240V)-
-208V/-----�240
21_1-264 V_
V
21_1-264 V_
183-229 V___
_
Maximum continuous output current,
1.0 A (240 V)
_183-229
T 1.15 A (208 V)
1.21 A (240 V)
1.39 A (208 V)
_____..__ ____— — - __ ___
Nominal frequency _
60,Hz, ___
..____ _.____________________�_______
60 _ —Hz-
Extended frequency range
47-68 Hz
47-68 Hz
. __.________ .._ __. _____ c ____ _..__.._
AC short circuit fault current gver 3 cycles
.___..___—_.__.
5.8 Arms
5.8 Arms
I
Maximum units per 20 A (L-L) branch circuity
16 (240 VAC)
13 (208 VAC)
13 (240 VAC)
11 (208 VAC)
_
__.__________
. Overvoltage class AC port
III
III
_ �
AC port backfeed current
0 A
0 A
Power factorsetiing -
1.0
1.0
,
Power facrt r(adiustable)
0.85 leading...
0.85 lagging
0.85 leading...
0.85 lagging
.__.,_..._._.._,
CEC weighted efficiency
_.-- ___._ _.,._ -.._._
97.0 % 97.0 % 97.0 % 97.0 %
MECHANICAL DATA
temperature range___
-40°C to+65°C
_Ambient
Relatiumi ve hdity range
4%to 100 % (condensing)
Connectortype (IQ7-60-2-US &IQ7PLUS-72-2 US)
9154 (dr Amphenol H4 UTX with a_d_drtion_al Q,DCC-5 adapter)
�~ _
Connectortype (IQ7-60-B-US&IQ7PLUS-72-B-US)
Friends PV2 (MC4 intermateable).
Adaptors for modules with MC4 or UTX connectors:
- PV2 to MC4: order ECA-S20-S22
- PV2 to UTX: order ECA-S20-S25
Dimensions (WzHxD)
_ - -
212 mm_x 775 mm
Weight
1.08 kg (2.38 lbs)-----
_—___�_
Cooling
Natural convection -No fans i
Approved for wet locations
Yes
' Pollution —degree--
053
Enclosure
Class If double -insulated, corrosion resistant polymeric enclosure
Environmental category /UVexposure rating
NEMATypeb/outdoor _
FEATURES
Communication - -
Power Line Communication (PLC)
Monitoring
Enlighten Manager and MyEnlighten monitoring options.
Both options require installation of an Enphase IQ Envoy.
Disconnecting means
The AC and DC connectors have been evaluated and approved by UL for use asthe load -break
disconnect required by NEC 690.
Compliance
CA Rule 21 (UL 1741-SA)
UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B,
CAN/CSA-C22.2 NO. 107.1-01
This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC-2014 and
NEC-2017 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, for AC
and DC conductors, when installed according manufacturer's instructions.
1. No enforced DC/AC ratio. Seethe compatibility calculator at httns,//ennhase.com/en-us/sLinnort/module-compatibility.
2. Nominal voltage range can be extended beyond nominal If required by the utility.
3. Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
To learn more about Enphase offerings, visit enphase.com v E N P H AS E.
w 2018 Enphase Energy. All rights reserved. All trademarks or brands used are the property of Enphase Energy, Inc.
2018-11-19