HomeMy WebLinkAboutPRODUCT EVALUATION REPORT`!
BUILDING DROPS 398East Dania Beacte338
Suite 38
k
A Perfect Solution in Every Drop! Dania Beach, .8 33004
954.399478 PH
1(Certificate of Authorization: 29578 954.744.4738 FX
contact@buildingdrops.com
Product Evaluation Report
Of
Silver Line Doors & Windows
V3 Series/ 70 Series Gliding Patio Doors (5800)
for
Florida Product Approval SCANNED
BY
FL# FL14998 Lucie
St. Lucie county
Report No. 5213
Current Florida Building Code
Method: 1— D (Engineering Evaluation)
Category: Exterior Doors
Sub —Category: Sliding Exterior Door Assemblies
Product: V3 Series/ 70 Series Gliding Patio Doors (5800).
Material: Vinyl
Product Dimensions: Refer SWD040 For Dimensions
Prepared for:
Silver Line Windows and Doors
One Silverline Dr.
North Brunswick, NJ 08902
Prepared by:
Hermes F. Norero, P.E.
Florida Professional Engineer # 73778
Date:10/19/2017
Contents:
Evaluation Report Pages 1-3
Digitally signed by Hennes F. Norero, P.E.
Reason: I am approving this document
Date: 2017.10.27 17:25:57-04'00'
J���ES p',,��i
i :�o,�'•• C P.'• mow:
Hermeo, P.E.
Florida No. 73778
4
1(BUILDING DROPS
k
A Perfect Solution in Every Dropl
Certificate of Authorization: 29578
Manufacturer: Silver Line Doors & Windows
Product Category: Exterior Doors
Product Sub -Category: Sliding Exterior Door Assemblies
Compliance Method: State Product Approval Method (1)(d)
Product Name: V1 Series/ 50 Series Gliding Patio Doors (5800)
71.625" X 80.0" (XO)
FL#: FL14998
Date: 10/19/2017
Report No: 5213
Scope: This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL # 73778) for Silver Line
Doors & Windows based on Method Id of the State of Florida Product Approval, Florida Department
of Business and Professional Regulation - Florida Building Commission.
Limits of Use:
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of
the product named herein.
This product has been evaluated for use in locations adhering to the current Florida Building Code.
See Installation Instructions SWD040, signed and sealed by Hermes. F. Norero, P.E. (FL # 73778) for
specific use parameters.
1. This product has been evaluated and is in compliance with the current Florida Building Code,
including the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment into
substrate material shall be beyond wall dressing or stucco.
3. When used in areas requiring wind borne debris protection this product complies with
Chapter 16 of the current Florida Building Code and does not require an impact resistant
covering.
5. Site conditions that deviate from the details of drawing SWD040 require further engineering
analysis by a licensed engineer or registered architect.
6. See Installation Instructions SWD040 for size and design pressure limitations.
Hermes F. Norero, P.E.
Florida No. 73778
Page 2 of 3
4
1(BUILDING DROPS
k
A Perfect Solution in Every Drop!
Certificate of Authorization: 29578
FL#: FL14998
Date: 10/19/2017
Report No: 5213
Quality Assurance Entity: The manufacturer has demonstrated compliance of products in accordance with the
Florida Building Code for manufacturing under a Quality Assurance Entity through
Window and Door Manufacturers Association (FBC Organization #QUA2515).
Performance Standards: The product described herein has been tested per:
Referenced Data:
• TAS 201-94
• TAS 202-94
• TAS 203-94
1. Product Testing performed by Testing Evaluation Lab, Inc.
(FBC Organization # TST4317)
Report #: TEL 01410070 Report Date: 04/06/2015
Signed and Sealed by Lyndon Schmidt, PE # 43409
2. Quality Assurance Entity
Window and Door Manufacturers Association
(FBC Organization #QUA2515)
3. Material Certification
Miami -Dade Country RER Product Control Office NOA
Current NOA for PVB Interlayer by Kuraray America (Previously DuPont)
4. Material Certification
Miami -Dade Country FIER Product Control Office NOA
Current NOA for PVB Interlayer by Eastman Chemical Co (Previously Solutia)
5. PVC profiles certified by AAMA in accordance with AAMA 303
Installation Method: Please refer to installation instructions, SWD040, for anchor methods, selection, spacing,
edge distances, embedment's and further details of installation.
Design Pressure: Please refer to installation instructions, SWD040, for mull combination grouping,
configurations, and corresponding design pressures.
Hermes F. Norerc, P.E.
Florida No. 73778
Page 3 of 3