HomeMy WebLinkAboutSIGN SPECIFICATIONSSCANNED
BY
St. Lucie Countv
CAST BRONZE
DEEP GREEN BACKGROUND
CAST BRONZE
BLACK BACKGROUND
RECEI L'_D APR'28 206
CASTALUMINUM
DEEP GREEN BACKGROUND
CASTALUMINUMI
LACK,B�LCKGR UN
+L �
SIGN SPECIFICATIONS:
EP� CLIENT: THE LEGACY GOLF
AND TENNIS CLUB PRODUCT. C STOM PLAOU
DATE: 4-24-15
)%
SIZE (WxHI: 24"x}G"
ORDERII: SAMPLE
MATERIAL' SEEABOVE
APPROVED AS IS
MOUNTING: CONCEALED WALL MOUNT
❑ NEEDS CORRECTIONS
POST& CAP: -
FINISH/COLOR: SEE ABOVE/ POLISHED RAISED AREAS
ADrrMRunswruTURB
nRh QUANTITY: PLFASEADVISE
THEM TENDERING ISM APPRONIMA¶ON FOR INVOUF PURPOSES ONLY.
THE AMALPRODUR MAY VARY SNGH DUE TO MANUMMMNG PROCESSES.
N.:FUGUE REVIEW SHOP DRAWING ODUFUUVANO NOSE CORREMON.
AUMORRFDSIGNAMRCAND DATE REQUIRED TO BEGIN MM'UFAMAING PROCESS.
o �msMNFnnryiabati m•m•amU.preydau.snpamfin�grtam.YtlenMvntmM.im
Concealed Mounting - Bosses and Studs
Bosses (extra pads) are cast onto the back of the plaque. These are drilled and tapped to accept threaded studs.
Flat backed plates (generally smaller sizes) are drilled and tapped for studs without bosses on the back.
Recommended Uses:
For concealed and permanent mounting to brick walls, stone or masonry surfaces.
Installation:
Drill holes in the mounting surface slightly larger than the diameter of the studs. Fill mounting holes with sil-
-- cone, epoxy or quickset cement. -Set into holes, and allow the adhesive.to cure - -- -. -- - —
Toggle Bolt Mounting - Optional Rosettes
Holes are drilled through the face of the plaque for toggle bolts. Toggle bolts are threaded machine screws 4" to 6" long with
spring -loaded butterflies that fold up and pass through holes in the wall
Recommended Uses:
For semi -permanent mounting to hollow tile, cement block, drywall and wood paneling over studs.
Installation:
Using the plaque holes as a template, drill holes through the wall large enough to accommodate the butterfly assembly. Insert
each machine screw through the plaque and screw on each butterfly. Fold the butterfly assemblies and insert them through holes
until wings spring open inside the hollow wall. Pull back on each screw head to press the butterfly against the inside wall. Turn
each machine screw, first by hand, then with a screwdriver. If rosette covers are provided, screw rosettes into the toggle bolt
heads.
Expansion Anchor Sleeves - Optional Rosettes " 44p"
'.
Holes are drilled through the face of the plaque for machine screws. Each metal expansion sleeve (or legd'encho"rs a threaded
interior to house a machine screw. The lead anchor will expand when a suety is inserted and tighte ed. ,^
Recommended Uses:
For semi -permanent mounting to brick walls, stone or masonry surfaces.
Installation
Using the plaque holes as a template, drill holes into the wall large enough mtr
ad or. Drill deep enough so the
fully driven screw wont strike the back of the hole. Insert expansious leeves ceded cones first Using metal setting
tool, strike tool with hammer to drive sleeve into each hole. Insert each macw - ough the plaque and tighten screws
into expansion sleeves with a screw driver. If rosette covers are provided, scres into the machine screwheads.
Wood Screw Mounting - Optional Rosettes
Holes are drilled through the plaque and countersunk to accept a flat or oval head wood screw. Larger sized woodscrews, 914 &
#16, can have the heads drilled and tapped to accept a rosette
cover if desired.
Recommended Uses:
For semi -permanent mounting to wood and plaster walls. When mounting to plaster walls, we recommend small plate styles
only.
Installation:
Using the plaque holes as a template, drill wall holes. Insert wood sums through the plaque holes and tighten screws with a
screwdriver. If rosette covers are provided, screw rosettes into the wood
screw head.