HomeMy WebLinkAboutPROJECT INFORMATIONFormed Plastic Letters Specifications
Part I — General
1.1 Scope
A. Furnish letters and hardware necessary to install formed plastic letters shown on drawings and herein specified.
12 Submittals
A. Manufacturer's illustrated product literature and specifications.
B. Installation instructions
12 Quality Assurance
A. Manufacturet to have a mbtimu n of 20 years experience in manufacturing letters.
B. All letters to be manufactured by one manufacturer.
Part I1— products
2.1 Acceptable Mamufsetmrx or Manufacturer's Representative
A. Gemini Incorporated
103 Mousing Way
Cannon Falls, MN 55009
Phone: 800538-8577 or 507-26M957
Fax: 800-421-1256 or 507-263-4887
F.mati: sates0s'tgaletters.com
Web: www.s(galetters.com
2.2 Materials (Wood and cotton -based plastic)
A. Cellulose Acetate Butyrate (C.AM.)
OL"t" CL
BY
St. LUCiP ('ni inf
2.3 CAD has the following specific characteristics (sbeet used for farmed letters is approximately .143" thick)
1. A specific beat of about 035.
2. Aheat of combustion of apprwdmately 104013TU per pound (2.42 x 107 J/Kg).
3. An rantr4gnition tcmporatum of about 880• F (4706C).
4. UL94 Flame Class: 94HB
S. Burn rates for shoot, as determined in testing underASTM'lt:st Method D 635:
• Approximately 1.0 Wmin (2.6 cm/min) for.125" (3.18 ram) thick material.
• Approximately 0.8 in/mill (2.1 cm/min) for.150" (3.81 mm) thick material.
2.4 Mounting Hardware
A. Formed plastic loners have plain, Range, stud, pad, combination, combination all, outside bracket, wire, foam-fil led (Max. 9") or free-standing for
mounting options.
B. All standard formed plastic letters use 3116" aluminum surds
2A Marn4uture
A. Letters shall be made of cellulose acetate butyrate.
B. Letter Shall be letterstyle and 014 be inches high, as indicated an the drawings.
C Mounting shall be and a motultiag template designating stud locations is/is not required for mounting on a
surface
Partm—Execution
3.1 Installation
A. A qualified installer shall iusta0 formed plastic Levers.
3.2 Warranty
A. Letters should be guaranteed for the life of the business against defects.
Q,- x'.exwua�k- 1Io oNS
'ouse- o dv� -� paw';L .—Thom v 6- -
C1vs�cv� Lt^-
'brlskx S Off/'�rt
/1A1 I+inn —" 9(93