HomeMy WebLinkAboutNOAMIALMI'MIR
ma
SCANNtij
BY
St•LUCie rnrinf
DEPARTMENT OF REGULATORY AND ECONOJffC RESOURCES (MR)
BOARD AND CODE ADIMNISTRATIONDMSION
NOTICE OF ACCEPTANCE (NOA)
Firestone Building Products Company, LLC
250 W. 96`s Street
Indianapolis, IN 46260
IMAW-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786)315-2590 F (786) 315-2599
immroiamidadc.eor/r onoroy
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami Dade County RER - Product Control Section to be
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami Dade County Product Control
Section (in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to
have this product or material tested for quality assurance purposes. If this product or material fails to perform in
the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to
revoke this acceptance, if it is determined by Miami -Dade County Product Control Section that this product or
material fails to meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Firestone Modified Bitumen Roof Systems over Concrete Decks.
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process_ Misuse of this NOA as`an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
]INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No. 15-0224.09 and consists of pages 1 through 135.
The submitted documentation was reviewed by Alex Tigera.
apswaftlem
�..
APPROVED
NOA No.: 16-0202.10
Expiration Date: 03/08/21
Approval Date: 03/24/16
Page 1 of 135
ROOFING SYSTEM APPROVAL
Cateeorv'
Roofing
Sub -Category:
Modified Bitumen
Material:
APP/SBS
Deck Type:
Concrete
Maximum Design Pressure:
-547.5 psf
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Test
Product
Product
Dimensions
Specification
Description
APP 80 Glass Base
39.4" x 654"
ASTM D6509
Fiberglass reinforced modified bitumen, smooth
surfaced base sheet.
SBS Glass Torch Base
39.4" x 3310"
ASTM D6163
Modified bitumen base sheet with a bum -off film
and reinforced with non -woven fiberglass mat.
SBS Base
39.4" x 50'
ASTM D6163
Fiberglass reinforced SBS base sheet. Applied in
hot asphalt or mechanically attached.
SBS Premium Base
39.6" x 50'
ASTM D6163
Fiberglass reinforced SBS base sheet. Applied in
hot asphalt or Multi -Purpose MB Cold Adhesive.
SBS PolyBase
39.6" x 50'
ASTM D6164
A smooth surfaced, non -woven polyester
reinforced, modified bitumen base sheet.
SBS Poly Torch Base
45" x 39"
ASTM D6164
Fiberglass reinforced' modified bitumen
membrane, SBS rubber modified asphalt
reinforced with a non -woven polyester mat
3Ply IV
33" x 180"
ASTM D2178
Fiberglass reinforced, asphalt impregnated,
roofing ply. Applied in hot asphalt,
Ply VI
33" x 180"
ASTM D2178
Fiberglass reinforced, asphalt impregnated,
roofing ply. Applied in hot asphalt.
I MB Base
/
36" x 108'
ASTM D4601
Fiberglass reinforced base sheet, asphalt coated
on both sides. Applied in hot asphalt or
mechanically attached.
SBS Smooth
39.4" x 33'10"
ASTM D6164
Smooth surfaced, modified bitumen membrane
reinforced with non -woven polyester mat.
Applied in hot asphalt.
APP 160-P
39.4" x 32'9"
ASTM D6222
Polyester reinforced modified bitumen, smooth
surfaced membrane. Torch applied for use as a
base or ply sheet only.
APP 170 Cool
39.6" x 33'6"
ASTM D6222
Polyester reinforced modified bitumen, smooth
surfaced membrane.
APP I80
39.4" x 32'10"
ASTM D6222
Polyester reinforced modified bitumen, granule
surfaced membrane. Torch applied.
FILE CQPY.2.10
Expiration Date: 03/08/21
Approval Date: 03/24/16
Page 2 of 135
APP 180-P
39.4" x 32'9" ASTM D6222
Polyester reinforced modified bitumen, granule
surfaced membrane. Torch applied.
APP 180 UltraWhite
39.4" x 32'10" ASTM D6222
Polyester reinforced modified bitumen,
UltraWhite granule surfaced membrane. Torch
applied.
APP 180 FR
39.4" x 32'10" ASTM D6222
Polyester reinforced, fire retardant modified
bitumen, granule surfaced membrane. Torch
applied.
APP 180 FR
39A" x 32'10" ASTM D6222
Polyester reinforced, fire retardant modified
UltraWhite
bitumen, UltraWhite granule surfaced membrane.
Torch applied.
APP 180 Cool
39.4" x 3T10" ASTM D6222
Polyester reinforced modified bitumen, granule
surfaced membrane.
APP 180 FR Cool
39.4" x 32'l0" ASTM D6222
Polyester reinforced, fire retardant modified
bitumen, granule surfaced membrane. Torch
applied.
SBS Glass
39.4" x 33'10" ASTM D6163
Fiberglass reinforced, granule surfaced, modified
bitumen membrane. Applied in hot asphalt.
(04- SBS Glass FR
--
39.4" x 33'10" ASTM D6163
Fiberglass reinforced, fire rated, granule
surfaced, modified bitumen membrane. Applied
in hot asphalt.
SBS Glass FR
39.4" x 33'l0" ASTM D6163
UltraWhite fiberglass reinforced, granule
UltraWhite
surfaced, modified bitumen membrane. Applied
in hot asphalt.
SBS Torch
48" x 39" ASTM D6164
Granule surfaced, SBS cap reinforced with a non-
woven polyester mat, with bum off film and
fiberglass enhanced.
SBS Torch UltraWhite
48" x 39" ASTM D6164
UltraWhite granule surfaced, SBS cap reinforced
with a non -woven polyester mat, with burn off
film and fiberglass enhanced.
SBS FR Torch
48" x 39" ASTM D6164
Granule surfaced, fire rated, SBS cap reinforced
with a non -woven polyester mat, with burn off
film and fiberglass enhanced.
SBS FR Torch
48" x 39" ASTM D6164
UltraWhite granule surfaced, fire rated, SBS cap
UltraWhite
reinforced with a non -woven polyester mat, with
bum off film and fiberglass enhanced.
SBS Glass FR Torch 39.4" x 33'10" ASTM D6163 Fiberglass reinforced, fire rated, granule
surfaced, modified bitumen membrane. with
bum off film and fiberglass enhanced.
SBS Glass FR Torch 39.4" x 33'l0" ASTM D6163 UltraWhite fiberglass reinforced, fire rated,
UltraWhite granule surfaced, modified wbitum Linwribrane.
with bu ff JW arC It ed.
NOA No.: 16-0202.10
Expiration Date: 03/08/21
Approval Date: 03/24/16
Page 3 of 135
SBS Cap 39.4" x 33'10" ASTM D6164 Granule surfaced, modified bitumen membrane
reinforced with non -woven polyester mat
SBS Cap UltraWhite 39.4" x 33'10" ASTM D6164 U1traVJhite granule surfaced, modified bitumen
membrane reinforced with non -woven polyester
mat.
SBS FR Cap 39.4" x 33'10" ASTM D6164 Granule surfaced, modified bitumen membrane
reinforced with non -woven polyester mat.
SBS FR Cap 39.4" x 33'10" ASTM D6164 UltraWhite granule surfaced, modified bitumen
UltraWhite membrane reinforced with non -woven polyester
mat.
SBS Premium FR 39.4" x 3TI0" ASTM D6164 Granule surfaced, fire rated, modified bitumen
membrane reinforced with non -woven polyester
mat.
SBS Premium FR 39.4" x 33'10" ASTM D6164 UltraWhite granule surfaced, fire rated, modified
UltraWhite bitumen membrane reinforced with non -woven
polyester mat_
SBS Premium 39A" x 33'10" ASTM D6164 Granule surfaced, modified bitumen membrane
reinforced with polyester mat. Applied in hot
asphalt.
SBS Premium Torch 39.4" x 33'10" ASTM D6164 Granule surfaced, modified bitumen membrane
with a bum -off film -and reinforced with non-
woven polyester mat.
SBS Premium Torch 39.4" x 33'10" ASTM D6164 UltraWhite granule surfaced, modified bitumen
UltraWbite membrane with a bum -off film and reinforced
with non -woven polyester mat.
SBS Premium FR 39.4" x 33'10" ASTM D6164 Granule surfaced, fire rated, modified bitumen
Torch membrane with a burn -off film and reinforced
with non -woven polyester. mat.
SBS Premium FR 39.4" x 33'10" ASTM D6164 UltraWhite granule surfaced, fire rated, modified
Torch UltraWhite bitumen membrane with a burn -off film and
reinforced with non -woven polyester mat.
I.S.O. Twin Pack Dual 750 ml Proprietary A two -component polyurethane insulation
Insulation Adhesive cartridges adhesive-
I.S.O. FIX 11 30 lb. Proprietary A single component polyurethane insulation
adhesive.
I.S_O. Stick 5 gal. Proprietary A two -component polyurethane insulation
adhesive.
Multi -Purpose MB 55 gal. Proprietary An asphalt based adhesive.
Cold Adhesive
LiquiGard Membrane 6 gal. Proprietary A two -component, solvent -free, asphalt -based
--Adhesive urethane adhesive.
1i VIP C ARA
It UPI
MIAMI•DADECOUNTY
NOA No.: 16-0202.10
�FjAmExpiration Date: 03/OS/21
Approval Date: 03/24/16
Page 4 of 135
APPROVED INSULATIONS:
Product Name
ISO + GL (and Tapered),
RESISTA (and Tapered)
ISOGARD HD
ISOGARD HD Composite
DensDeck, DensDeck Prime
SECUROCK Gypsum -Fiber
Roof Board
High Density Wood Fiberboard
Perlite Insulation Board
APPROVED FASTENERS:
Fastener Product
Number Name
I. Firestone All -Purpose
2. Firestone Heavy -Duty
TABLE 2
Product Description
Polyisocyanurate Insulation board with glass
reinforced organic facer
Polyisocyanurate Insulation board with coated
fiberglass facer
High density Polyisocyanurate roof board with
a coated fiberglass -facer
Polyisocyanurate foam core laminated to
ISOGARD HD board
Silicon treated gypsum
Gypsum Cover board
High Density Wood Fiber insulation board.
Perlite Insulation
TABLE 3
Product
Description Dimensions
Insulation and membrane Various
fastener
Insulation and membrane
fastener
3. Concrete Drive Fastener I/4" diameter concrete deck
fastener.
4.
5.
6.
7.
8.
MB 2" Barbed Metal Metal plates used for
Seam Plate membrane securement.
2" Metal Plate Membrane attachment plate.
Insulation Fastening Plate Insulation plate for use with
Firestone Fasteners
#14 Roofgrip
Firestone Coiled Metal
Batten Strip
Insulation and membrane
fastener
Galvalume AZ55 Batten
Bar
Various
Various
2" dia
2" dia
3" round
Various
Manufacturer
ith Current NOA
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Georgia Pacific Gypsum LLC
United States Gypsum
Corporation
Generic
Generic
Manufacturer
ith Current NOA
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
Firestone Building Products
Company, LLC
OMG, Inc.
Products
MIAMI•DADE COUNTY NOA No.. 16-0202.10
• • • . , Expiration Date: 03/08/21
Approval Date: ,03/24/16
Page 5 of 135
EVIDENCE SUBMITTED:
Test Ay yen_ S_ Test Identifier Description Date
FM Approvals 1D5A8.AM FM 4470 09/09/98
3003597 FM 4470 07/14/99
3004786 FM 4470 05/16/00
3005030 FM 4470 08/08/00
3014031 FM 4470 07/22/02
3022502 FM 4470 01/29/07
3030227 FM 4470 06/18/07
3007328 FM 4470 07/12/02
3012321 FM 4470 07/29/02
3014692 FM 4470 08/05/03
3033218 FM 4470 08/04/10
3035017 FM 4470 08/04/10
3031943 FM 4470 09/25/09
3033921 FM 4470 08/04/10
3030107 FM 4470 12/24/09
3009613 FM 4470 03/03/11
3028093 FM 4470 03/03/11
3040795 FM 4470 03/24/11
3041534 FM 4470 03/09/11
3042392 FM 4470 06/08/11
3035560 FM 4470 01/11/10
3038191 FM 4470 08/04/11
3040306 FM 4470 09/07/11
3046333 FM 4470 08/10/12
3047398 FM 4470 08/15/13
3037346 FM 4470 03/09/11
3040109 FM 4470 03/09/11
3030227 FM 4470 06/18/07
3044047 FM 4470 08/15/13
Underwriters Laboratories R9516 UL 790 01/25/13
Trinity]ERD 48101.96-1 TAS 114-C & TAS 114-D 01/31/96
F880018-R1 TAS 114 04/21/08
F1037058 ASTM C1289 05/08/08
F10500.108-1 ASTMD6163 08/26/08
F319605.10-1 ASTM D4977 05/19/10
17319605.10-2 ASTM D4977 05/19/10
F319608.10-1 ASTM D4977 08/25/10
F319608.10-2 ASTM D4977 08/25/10
17354005.11 ASTM Physical Properd im V51/11
F410708.12 D 4/12
U41790.05.12-2-R2 DC 10 1/13
U41790.05.12-1-RI F
_ 01/21/13
-IRT=ARGON,-Inc. 02-010, 02-011 TAS 114 01/28/02
Atlantic & Caribbean Roof 03-002 TAS 114 03/06/03
Consulting, LLC.
NW NOA No.: 16-0202.10
M �®u Expiration Date: 03/08)21
Approval Date: 03/24/16
Page 6 of 135
PRI Construction Materials FBP-018-02-01
Technologies LLC FBP-011-02-01
FBP-008-02-01
FBP-009-02-01
FBP-010-02-01
FBP-014-02-01
FBP-015-02-01
FBP-016-02-01
FBP-017-02-01
FBP-019-02-01
FBP-023-02-01
FBP-007-02-01
FBP-020-02-01
FBP-038-02-03
FBP-038-02-04
FBP-038-02-02
FBP-038-02-01
FBP-043-02-03
FBP-043-02-02
FBP-043-02-04
FBP-043-02-01
FBP-042-02-01
FBP-042-02-02
FBP-058-02-01
FBP-057-02-01
FBP-056-02-01
F13P-087-02-01
FBP-088-02-01
FBP-106-02-01
FBP-109-02-01
FBP-] 13-02-01
FBP-114-02-01
FBP-118-02-01 Rev.I
FBP-123-02-01
FBP-118-02-01
FBP-124-02-01
FBP-126-02-01
FBP-127-02-01
FBP-130-02-01
FBP-132=02-01
FBP-133-02-01 Rev.3
FBP-133-02-02 Rev.]
FBP-141-02-01
FBP-142-02-01 Rev.l
FBP-142-02-02Rev.1
FBP-152-02-01
FBP-059-02-01.4
ASTM 136163
09/07/04
ASTM D6164
09/02/04
ASTM D6222
09/10/04
ASTM D6222
08/31/04
ASTM D6164
09/04/04
ASTM D6164
09/02/04
ASTM D6509
09/02/04
ASTM D6509
09/02/04
ASTM D6163
09/13/04
ASTM D4601
09/14/04
ASTM D6223
09/01/04
ASTM D6222
09/14/04
ASTM D2178
09/14/04
ASTM D6164
01/12/11
ASTM D6164
01/12/11
ASTM D6164
01/12/11
ASTM D6164
12/27/10
ASTM D6164
07/26/11
ASTM D6164
08/02/11
ASTM D6164
07/26/11
ASTM D6164
08/02/11
ASTM D6164
07/26/11
ASTM D6164
07/27/11
ASTM D4601
12/12/08
ASTM D2178
12/12/08
ASTM D2178
12/12/08
ASTM D4798
03/22/13
ASTM D4798
03/22/13
TAS 114(J)
04/19/13
TAS 114(J)
04/19/13
TAS 114(J)
04/17/13
TAS 114(J)
TAS 114(J)
01/02/14
TAS 114(J)
07/26/13
TAS 114(J)
01/02/14
TAS 114(J)
08/02/13
ASTM D6163
12/03/13
ASTM D6164
11/20/13
TAS 114(D)
08/23/14
TAS 114LD mPT83/14
I I2/14
12/18/13
TAS 114(J) 01/02/14
TAS 114(J) 10/01/13
TAS 114(D) 12/18/13
ASTMD90301876/135147 06/03/14
TAS 117(B)/114(D) &(H)
NOA No.: 16-0202.10
Expiration Date: 03/08/21
Approval Date: 03/24/16
Page 7 of 135
Membrane Type: SBS
Deck Type 3I: Concrete Decks, Insulated
Deck Description: 2500 psi structural concrete or concrete plank
System Type A(17): One or more layers of insulation adhered with approved asphalt.
All General and System Limitations apply.
One or more layers of any of the following insulations:
Base Insulation Laver
Insulation Fasteners
Fastener
able 3
Density/ft'
ISO 95+ GL, RESISTA or other Approved polyisocyanurate listed in Table 2
Minimum''%" thick
N/A
N/A
Too Insulation Laver
Insulation Fasteners
Fastener
Table 3
Density/ft=
—�� Approved High Density Wood Fiberboard
Minimum %" thick
N/A
N/A
Approved Perlite
Minimum'/d' thick
N/A
N/A
Note: Concrete deck shall be primed with ASTM D 41 asphalt primer and allowed to dry prior to application of
insulation. All insulation shall be adhered to the deck in full mopping of approved asphalt within the EVT
range and at a rate of 20-40 lbs./100 ftr. Please refer to Roofing Application Standard RAS 117 for insulation
attachment. Insulation listed as base layer only shall be used only as base layers with a second layer of
approved top layer insulation installed as the final membrane substrate. Composite insulation panels used as a
top layer shall be placed with the polyisocyanurate side facing down.
Base Sheet: One ply of Firestone MB Base or Firestone Ply IV , Ply IV (4) M, Ply VI or Ply VI (6) M ply
sheet bonded in a full mopping of approved asphalt applied within the EVT range and at a
rate of 2040 lbs./sq.
Ply Sheet: 3 �% f j- (Optional) One or more plies of SBS Smooth, MB Base, Firestone Ply IV , Ply IV (4) M, Ply
VI or Ply VI (6) M ply sheet, SBS Base or other Approved base or ply sheet adhered in a full
mopping of approved asphalt applied within the EVT range and at a rate of 20-40 Ibs✓sq.
Membrane: ) el ` One ply of Firestone SBS Cap, SBS Cap UltraWhite, SBS FR Cap, SBS FR Cap UltraWhite,
7 SBS Smooth, SBS Premium, SBS Premium FR, SBS Premium FR UltraWhite, SBS Glass,
SBS Glass FR or SBS Glass FR UltraWhite adhered in a full mopping of approved asphalt
applied within the EVT range and at a rate of 20-40 lbs./sq.
Or
w
MLAM4DADE COUNTY NOA No.; 16-0202.10
. • • • � , Expiration Date: 03/0821
Approval Date: 03/24/16
Page 37 of 135
(Not with MB Base) One ply of Firestone SBS Smooth, SBS Cap, SBS Cap UltraWhite, SBS
FR Cap, SBS FR Cap UltraWhite, SBS Glass, SBS Glass FR, SBS Glass FR UltraWhite, SOBS
Premium, SBS Premium FR, SBS Premium FR UltraWhite fully adhered with LiquiGard
Membrane Adhesive squeegee applied at a rate of 1.5 — 2 gal./square. The minimum 3 in.
wide side laps are sealed with LiquiGard Membrane Adhesive squeegee applied at a rate of
1.5 — 2 gal./sq.
Or
One ply of Firestone SBS Torch, SBS Torch UltraWhite, SBS FR Torch, SBS FR Torch
UltraWhite, SBS Glass FR Torch, SBS Glass FR Torch UltraWhite, SBS Premium Torch,
SBS Premium Torch UltraWhite, SBS Premium FR Torch or SBS Premium FR Torch
UltraWhite, torch adhered.
Or
(Not with SBS Base, SBS Smooth) One ply of Firestone SBS Smooth, SBS Cap, SBS Cap
UltraWhite, SBS FR Cap, SBS FR Cap UltraWhite, SBS Glass, SBS Glass FR, SBS Glass
FR UltraWhite, SBS Premium, SBS Premium FR or SBS Premium FR UltraWhite cap sheet
fully adhered to the base sheet with Firestone Multi -Purpose MB Cold Adhesive applied at
1 %a - 2 gal./sq.
Surfacing: (Optional) Any coating, listed below, used as a surfacing, must be listed within a current
NOA. Install one of the following to obtain required fire classification.
1. Gravel or slag at 400 lbs./sq. or 300 lbs./sq, respectively, in a flood coat of approved
asphalt at 60 lbs./sq.
2. Karnak 97 Fibrated Aluminum Asphalt Roof Coating or Asbestos Free Aluminum Roof
Coating at 1'/2 gal./sq.
Maximum Design
Pressure: -255 psf. (Perlite as top insulation layer) (See General Limitation 419)
-520 psf. (High Density Wood Fiberboard as top insulation layer) (See General Limitation #9)
NOA No.. 16-0202.10
Expiration Date: 03108t21
Approval Date: 03/24/16
Page 38 of 135
CONCRETE DECK SYSTEM LIMITATIONS:
If mechanical attachment to the structural deck through the lightweight insulating concrete is proposed, a field
withdrawal resistance testing shall be performed to determine equivalent or enhanced fastener patterns and density.
All testing and fastening design shall be in compliance with Testing Application Standard TAS 105 and Roofing
Application Standard RAS 117, calculations shall be signed and sealed by a Florida Registered Engineer, Architect,
or Registered Roof Consultant.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance, refer to a current Approved Roofing Materials Directory for fire
ratings of this product.
2. . Insulation may be installed in multiple layers. The first layer shall be attached in compliance with Product Control
Approval guidelines. All other layers shall be adhered in a full mopping of approved asphalt applied within the
EVT range and at a rate of 2040 lbsJsq., or mechanically attached using the fastening pattern of the top layer
3. All standard panel sizes are acceptable for mechanical attachment. When applied in approved asphalt, panel size
shall be 4' x 4' maximum.
4. An overlay and/or recovery board insulation panel is required on all applications over closed cell foam insulations
when the base sheet is fully mopped. If no recovery board is used the base sheet shall be applied using spot
mopping with approved asphalt, 12" diameter circles, 24" o.c.; or strip mopped 8" ribbons in three rows, one at
each sidelap and one down the center of the sheet allowing a continuous area of ventilation. Encircling of the
strips is not acceptable. A 6" break shall be placed every 12' in each ribbon to allow cross ventilation. Asphalt
application of either system shall be at a minimum rate of 12 lbsJsq. Note: Spot attached systems shall be
limited to a maximum design pressure of 45 psf.
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') value of 2751b£, as
tested in compliance with Testing Application Standard TAS 105. If the fastener value, as field-tested, are below
2751bf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based on a minimum
fastener resistance value in conjunction with the maximum design value listed within a specific system. Should the
fastener resistance be less than that required, as determined by the Building Official, a revised fastener spacing,
prepared, signed and sealed by a Florida Registered Engineer, Architect, or Registered Roof Consultant may be
submitted. Said revised fastener spacing shall utilize the withdrawal resistance value taken from Testing
Application Standards TAS 105 and calculations in compliance with Roofing Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these areas. Fastener
densities shall be increased for both insulation and base sheet as calculated in compliance with Roofing Application
Standard RAS 117. Calculations prepared, signed and sealed by a Florida registered Professional Engineer,
Registered Architect, or Registered Roof Consultant (When this limitation is specifically referred within
this NOA, General Limitation #9 will not be applicable.)
8. All attachment and sizing of perimeter nailers, metal profile, and/or flashing termination designs shall conform with
Roofing Application Standard RAS 111 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e. field,
perimeters, and comers). Neither rational analysis, nor extrapolation shall be permitted for enhanced fastening at
enhanced pressure zones (i.e. perimeters, extended comers and comers). (When this limitation is specifically
referred within this NOA, General Limitation #7 will not be applicable.)
10. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
— --Rule 61G20-3-of the Florida Administrative Code.
END OF TMS ACCEPTANCE
FILE ff'-k'PY
NOA No.: 16-0202.10
MIAMI-DADE COUNTY
... � � Expiration Date: 03/08/21
Approval Date: 03/24/16
Page 135 of 135