HomeMy WebLinkAboutACRYLIC SHEET` ..SCANNED
Q� St. Lucie Count,
Acrylic Sheet
Average Physical: Properties of'Pleiiiglas Gt * Thisvalue:will change with thick-
ness. The value given is for the
ASTM thickness In the colurimn heading. -
PROPERTY _ _ _M_ethod' _ UNITS PlexiglasG " Values reported,"are. averages "and
.:.. Thickness, nominal .in. 0.2301 should not be used for specification
n.
Specific gravity_ _ _ _ _ D792 __ _ N/A ,' -_ - 1.19. __ purposes. "
.OPTICAL _ _
-- - - -� -- - - • -- -_--• - - - -- For a complete listing of physical
Refracbve.index; D642 N/A 1AS ... properties,go to wevemplexiglas,com
Lighttransmittanceand haze,; as recslved'.: D1003 ::.... .. or call yourlocalsales representative: -
Porellel .. _. % '-- :91 ^ " " " and ask for a copy of the Plexiglas:
Total % 92* General Information and.Physical
Haze, : % :1*. . Properties. Brochure, .. ..
'MrCHANICAL--
. Tensile strength L25'spe6mon - 0.2'/rhin)
D638-
Maximum'
psi
10,500 _
- Rupture
-
psi '
10,540,
., Elongation, maximum
%
4.9.
. Elongation, rupture .
%
:4.9.
Modulus of elasticity. .,. - -�-
-
;' psi
' :456,000_
Polsson's ratio .'
_
_
0.35
.. Flexural strength (span depth ratio 16, 0.1'/min)
D790
Maximum.
psi -
16,000
_ 'Rupture ;,; "
psi. : "
16,060
Deflection; maximum'
In
0.6 -
Deflection, rupture'
in
0.6
Modulus of elasticity, _ _ _ _
j
_ _ _
, psi -
450,000
Shear strength __ -
D732
: psi
.:9000•
Shear modulus-.
- _ -
psi
- 967,0007.-
,' Impact strength '
,. Charpy unnotched @73°F ....
.D256
. ft-lb/
• 7.0
-
1/2" x-i' sect-
lzOd milled, notch @73°F,
_ ft-lbAn_of notch_
_ 03 _
Rockwell Hardness
D785
M•100•
TfICRMAL
Hot forming temperature' _' _ _ _'
_ - '
_ _°F "
290_360_ .
" Deflection temperature under,
7.
; (flexural) load
D648
3.6°F/min-264 psi
:'°F
.205•
Maximum recommended
_
-. continuous service temperature _
_ _ - _
°F _
180-200 .
Coefficient of linear thermal expansion
60°F
R&HIP4A
1Nin/P X 105 „r
3.9
.Coefficient of thermal conductivity
_ Cenco-Fitch__
BTU/(hr)(sq ftll°F/in)
1.3
Specific heat at 77'F
- __
BTU/f(Ib)('F) _ -'-"�
-0.35
MfSCELLANEOUS
Horizontal burning test avg.
D635 ....
' cm/min:
.2.8.
Burning rate "'
(In/min)
Smoke density
D2843
%
4-10
Flammability_classificatlon___"_44HB
.: Odor_ _ _
_
_
_ Nona.•_..
._ Taste .- _ _..
_
-._ _ ...
None!'
AL-UGLAS.
I N T•E:R N VT I.0 N A'.L'-
ARKEMA GROUP. ..
AM920120.71DWrr,131
.. Arkema:lne., 2000 Market Street, Philadelphia, PA 19103'
... www,eltuglasint.com www.Plexiglasxom
The statements, lectmica).information and
recommendations contained herein are
believed to be accurate as of the dale hereof.
Smco the conditions and methods of use of
.the. product and of the information referred to
herela are beyon4 our control, Arkeuia'-
:expressly disclaims any and all liability as to
,my results obtained at arlsing train any use of
the product or reliance on such Information;
.NO WARRANTY OF FITNESS FOR ANY. PAR-
TICULAR PURPOSE, WARRANTY OF MER. '
CHANTABILITY OR ANY. OTHER WARRANTY,
EXPRESS OR -IMPLIED, IS MADE CONCERN;- -
ING THE:000DS DESCRIBED OR THE -
INFORMATION PROVIDED HEREIN. The,"
information provided herein relates only to the .
specific product designated and may not be -
applicable when such -product is.usedin com-
.tbinauon with other.materials or In any„
:process. The user should thoroughly test any
-'application before commercialization. Nothing
contained herein should be construed as an
.[inducement to infrafte.any patent, and the
user is advise4 to take appropriple steps to be ,
sure thatany proposed use of the producrwilf
not resell in patent infripgemcal.
See MSDS for Health &-Safely Considerations.
Alluglos® and PloxiglasO G are
:registered trademarks of Arkema.."•
'0 2002 Arkema'Inc. -