Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
REVISION 9-19-19
W; WN w.v\ ;. OFFICE USE ONLY: DATE FILED: Cr\ �q 1 tk REVISION FEE: 1 9 PERMIT # 1�p, _ 5L, \ RECEIPT 4 a 1 PLANNING & DEVELOPMENT SERVICES BUILDING & CODE REGULATION DIVISION 2300 VIRGINIA AVENUE NNED FORT PIERCE, FL 34982.5652 SC' BY (772)462.1553 RECEIVED St, Lucie County APPLICATION FOR BUILDING PERMIT RE ISIONSSEP 1 8 °�Ji9 PROJECT INFORMATION LOCATION/SITE 9r. L0€I@ Fg4 nly, f�prmlaing ADDRESS: 3891 St. Lucie Blvd. Fort Pierce, Florida 34946 DETAILED DESCRIPTION OF PROJECT REVISIONS: Plumbing - Sanitary Revision CONTRACTOR INFORMATION: STATE of FL REG./CERT. #: CGCO13084 ST. LUCIE CO CERT. #: BUSINESS NAME: Richard k. Davis Construction Corporation QUALIFIERS NAME: Douglas Davis ADDRESS: P.O Box 186 CITY: Fort Pierce STATE: Florida ZIP: 34954 PHONE (DAYTIME): 772-461-8335 FAX: 772-465-7665 OWNER/BUILDER INFORMATION: NAME: Pursuit Boats ADDRESS:3901 St. Lucie Blvd CITY: Fort Pierce STATE: Florida PHONE (DAYTIME: FAX: ARCHITECT/ENGINEER INFORMATION: NAME: Cardinal Engineering Associates Inc. ADDRESS: 575 NW Mercantile PI. CITY: Port St. Lucie PHONE (DAYTIME): 561-746-6343 SLCCC: 9123109 Revised 06130117 ZIP: 34986 LE COPY OFFICE USE ONLY: DATE FILED: March 18, 2020 REVISION FEE: PERMIT # 1907-0579 RECEIPT # PLANNING & DEVELOPMENT SERVICES BUILDING & CODE REGULATION DIVISION 2300 VIRGINIA AVENUE SCANNED FORT PIERCE, FL 34982-5652 BY (772) 462-1553.E St. Lucie County APPLICATION FOR BUILDING PERMIT REVISIONS PROJECT INFORMATION LOCATION/SITE ADDRESS: 3891 ST. LUCIE BLVD., FORT PIERCE, FLORIDA 34946 PURSUIT BOATS PLANT EXPANSION DETAILED DESCRIPTION OF PROJECT REVISIONS: Provide updated fire wall/ceiling details, fire joint details and fire stopping details for 1 & 2-hour fire walls. CONTRACTOR INFORMATION: STATE of FL REG./CERT. #: CGCO13084 ST. LUCIE CO CERT. #: BUSINESS NAME: RICHARD K. DAVIS CONSTRUCTION CORP. QUALIFIERS NAME: DOUGLAS DAVIS ADDRESS: P. O. BOX 186 CITY: FORT PIERCE STATE: FLORIDA ZIP: 34954 PHONE (DAYTIME): 772-461-8335 FN: 772465-7665 OWNER/BUILDER INFORMATION: NAME: PB HOLDCO, LLC ADDRESS: 3901-ST. LUCIE BLVD. CITY: FORT PIERCE STATE: FLORIDA ZIP: 34946 PHONE (DAYTIME: 772-461-8335 FAX: 772465-7665 ARCHITECT/ENGINEER INFORMATION: NAME: DONADIO&ASSOCIATES ��� /� ADDRESS: 60917THSTREET FILE COPY CITY: VERO BEACH STATE: FLORIDA ZIP: 32960 PHONE (DAYTIME): 772-794-2929 FAX: 772-562-8600 Pursuit Boats Plant Expansion Fire Wall / Fire Floor Ceiling Submittal Details March 15, 2020 f q 0? -057q REVIEWED FOR CODE COMPLIANCE ST. LUCIE COUNTY BOCq�j REVISION FILE COPY 4AIvIr Igo7- 0679 0 D O N A D I O & Associates, Architects, P.A. March 17, 2020 _1 Attention: William Durden St. Lucie County Planning & Development Services Building & Code Regulation Division 2300 Virginia Avenue Fort Pierce, Florida 34982 RE: Pursuit Boats New Facility Permit No. 1907-0579 Rated Wall/Ceiling, Firestopping and Fire Joint Submittal Package Architect's Project No. 2018.42.7 Dear Mr. Durden, Attached please find a Submittal Detail Booklet for the Rated Wall, Rated Floor/Ceiling, Firestopping and Fire Joint Details for the Pursuit Boat Plant Expansion, of which I have personally reviewed with R.K Davis Construction and find acceptable. These details are to be used where the above rated penetration conditions exist in the Pursuit Boat Expansion Project. Please accept this signed and sealed letter, along with the Submittal Booklet, as an update to the above referenced Building Permit Number. Should questions, please feel free to contact the undersigned. 609 17'" Street Vero Beach, Florida 32960 Phone 772 794 2929 Fax772 562 8600 License No. AA0002238 �'�`� 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 MSR- " RN� V@@ 91. REGISTER NOW! Page Bottom Design No. U411 BXUV.U411 Fire-resistance Ratings - ANSI/UL 263 Design/System/Construction/Assembly Usage Disclaimer • Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements covering the installation and use of UL Certified products, equipment, system, devices, and materials. • Authorities Having Jurisdiction should be consulted before construction. • Fire resistance assemblies and products are developed by the design submitter and have been investigated by UL for compliance with applicable requirements. The published information cannot always address every construction nuance encountered in the field. • When field issues arise, it is recommended the first contact for assistance be the technical service staff provided by the product manufacturer noted for the design. Users of fire resistance assemblies are advised to consult the general Guide Information for each product category and each group of assemblies. The Guide Information includes specifics concerning alternate materials and altemate methods of construction. • Only products which bear ULs Mark are considered Certified. BXUV - Fire Resistance Ratings - ANSI/UL 263 Certified for United States BXUV7 - Fire Resistance Ratings - CAN/ULC-S101 Certified for Canada See General Information for Fire -resistance Ratings - ANSI/UL 263 Certified for United States Design Criteria and Allowable Variances See General Information for Fire Resistance Ratings - CAN/ULC-S101 Certified for Canada Design Criteria and Allowable Variances f-Desi h-No-U-4-1 Jury 12, 2018 Nonbearing Wall Rating — 2 Hr. * Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada), respectively:"— cIYtFlaar�nd.•Ceiling-;Rvnne�:_(Nat;Shnwrt�Mias255M5>rga'Tv�stee7=l�rr�reFurv�i+ teg5�2-=L'/2da.:deep�(miu3-`tSpShedy to o ro a��eil�tna witlLfasteae[s 2g in OC.max IA. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2A, channel shaped, min 2-1/2 in. deep, attached to Floor and ceiling with fasteners 24 in. OC. max. ALLSTEEL & GYPSUM PRODUCTS INC — Type SUPREME Framing System https://database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXUV.U411 &ccnshorttide=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUVU411 - Fire -resistance Ratings - ANSI/UL 263 CALIFORNIA EXPANDED METAL PRODUCTS CO — Viper20T" Track CONSOLIDATED FABRICATORS CORP, BUILDING PRODUCTS DIV —Type SUPREME Framing System MARINO/WARE, DIV OF WARE INDUSTRIES INC — Viper20T" Track FUSION BUILDING PRODUCTS — Viper20TM Track IMPERIAL MANUFACTURING GROUP INC — Viper20'" Track QUAIL RUN BUILDING MATERIALS INC — Type SUPREME Framing System SCAFCO STEEL STUD MANUFACTURING CO — Type SUPREME Framing System STEEL CONSTRUCTION SYSTEMS INC — Type SUPREME Framing System UNITED METAL PRODUCTS INC — Type SUPREME Framing System 1B. Floor and Ceiling Runners — (Not Shown) — For use with Item 2B- Channel shaped, fabricated from min 20 MSG corrosion -protected or galy steel, min width to accommodate stud size, with min 1 in. long legs, attached to floor and ceiling with fasteners spaced max 24 in. OC. 1C. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2C, channel shaped, min 2-1/2 in. wide fabricated from min 0.015 in. thick galy steel, attached to floor and ceiling with fasteners 24 in. OC. max. CLARKDIETRICH BUILDING SYSTEMS — CD ProTRAK DMFCWBS L L C — ProTRAK MBA METAL FRAMING — ProTRAK RAM SALES L L C — Ram ProTRAK STEEL STRUCTURAL PRODUCTS L L C — Tri-S ProTRAK 1D. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2D, channel shaped, min 2-1/2 in. wide fabricated from min 0.018 in. thick galy steel, attached to floor and ceiling with fasteners 24 in. OC. max. TELLING INDUSTRIES L L C — TRUE -TRACK'" 1E. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2E, channel shaped, min 2-1/2 in. wide fabricated from min 25 MSG steel, attached to floor and ceiling with fasteners 24 in. OC. max. KIRII (HONG KONG) LTD — Type KIRII 1F. Floor and Ceiling Runners — (Not Shawn) — Channel shaped, min width to accommodate stud size, with min 1 in. long legs, for use with studs specified below, attached to floor and ceiling with fasteners spaced max 24 in. OC. MARINO/WARE, DIV OF WARE INDUSTRIES INC — Viper20T" Track VT300 FUSION BUILDING PRODUCTS — Viper20T" Track https://database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXUV.U411&ccnshontide=Fire msistance+Ratings+-+ANSI/U... 8l7/2018 BXUV. U411 - Fire -resistance Ratings - ANSI/UL 263 IMPERIAL MANUFACTURING GROUP INC — Viper20T" Track 1G. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2G, channel shaped, min 2-1/2 in. deep, attached to Floor and ceiling with fasteners 24 in. OC. max. TELLING INDUSTRIES L L C — Viper20T" Track 1H. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 23. Channel shaped, attached to Floor and ceiling with fasteners 24 in. CC. max. BAILEY METAL PRODUCTS LTD — Type PLATINUM PLUS 1I. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2K, channel shaped, min 3-1/2 in. wide fabricated from min 0.018 in. thick galy steel, attached to floor and ceiling with fasteners 24 in. OC. max. STEEL INVESTMENT GROUP L L C — AlphaTRAK 11. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2L. Channel shaped, attached to Floor and ceiling with fasteners 24 in. OC. max. OEG BUILDING MATERIALS — OEG Track 1K. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2M, channel shaped, min 2-1/2 in. deep, formed of min. 25 MSG (0.018 in. min. bare metal thickness), attached to Floor and ceiling with fasteners 24 in. OC. max. CALIFORNIA EXPANDED METAL PRODUCTS CO — Viper X Track 1L. Framing Members* — Floor and Ceiling Runners — (Not Shown) — As an alternate to Item 1 - For use with Item 2N. Channel shaped, min. 2-1/2 in. deep, attached to Floor and ceiling with fasteners 24 in. OC. max. ALLSTEEL & GYPSUM PRODUCTS INC — Type D25 CONSOLIDATED FABRICATORS CORP, BUILDING PRODUCTS DIV — Type D25 QUAIL RUN BUILDING MATERIALS INC — Type D25 SCAFCO STEEL STUD MANUFACTURING CO — Type D25 STEEL CONSTRUCTION SYSTEMS INC — Type D25 UNITED METAL PRODUCTS INC —Type D25 .Steel�Studs'�Min 2=lain=deepPfor+ne8 of mi�'25{MS�g7v—ste-'le rma-wstodrspacing_24,inmOC-?Studs.to,be cUtol.4, mir1=les5lhap;Asselnbly!beight: 2A. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1G, channel shaped studs, min 2-1/2 in. deep, spaced a max of 24 in. OC. Studs to be cut 3/4 in. less than assembly height. ALLSTEEL & GYPSUM PRODUCTS INC — Type SUPREME Framing System CALIFORNIA EXPANDED METAL PRODUCTS CO — Viper20T" CONSOLIDATED FABRICATORS CORP, BUILDING PRODUCTS DIV — Type SUPREME Framing System MARINO/WARE, DIV OF WARE INDUSTRIES INC — Viper20T" https:l/database.ul.comlcgi-bin/XYV/template/LISEXTl1 FRAME/showpage.html?name=BXUV.U411 &ccnshorttitle=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 FUSION BUILDING PRODUCTS — Viper201 IMPERIAL MANUFACTURING GROUP INC — Viper20'" QUAIL RUN BUILDING MATERIALS INC — Type SUPREME Framing System SCAFCO STEEL STUD MANUFACTURING CO — Type SUPREME Framing System STEEL CONSTRUCTION SYSTEMS INC — Type SUPREME Framing System UNITED METAL PRODUCTS INC —Type SUPREME Framing System 213. Steel Studs — (As an alternate to Item 2, For use with Item 4D, 4H, and 41) — Channel shaped, fabricated from min 20 MSG corrosion -protected or galv steel, 3-1/2 in. min depth, spaced a max of 16 in. OC. Studs friction -fit into Floor and ceiling runners. Studs to be cut 5/8 to 3/4 In. less than assembly height. 2C. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1C, channel shaped studs, min 2-1/2 in. wide fabricated from min 0.015 in. thick galv steel, spaced a max of 24 in. CC. Studs to be cut 3/4 in. less than assembly height. CLARKDIETRICH BUILDING SYSTEMS — CD ProSTUD DMFCWBS L L C — ProSTUD MBA METAL FRAMING — ProSTUD RAM SALES L L C — Ram ProSTUD STEEL STRUCTURAL PRODUCTS L L C — Tri-S ProSTUD 2D. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1D, channel shaped studs, min 2-1/2 in. wide fabricated from min 0.018 in. thick galv steel, spaced a max of 24 in. CC. Studs to be cut 3/4 in. less than assembly height. TELLING INDUSTRIES L L C — TRUE -STUD'" 2E. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1E, channel shaped studs, min 2-1/2 in. wide fabricated from min 25 MSG steel, spaced a max of 24 in. CC. Studs to be cut 3/4 in. less than assembly height. KIRII (HONG KONG) LTD — Type KIRII 2F. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1G, channel shaped studs, min 2-1/2 in. deep, spaced a max of 24 in. OC. Studs to be cut 3/4 in. less than assembly height. TELLING INDUSTRIES L L C — Viper20'" 2G. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1, channel shaped studs, Min 2-1/2 in. deep, formed of min 25 MSG galv steel max stud spacing 24 in. CC. Studs to be cut 3/4 in. less than assembly height. ES METAL INC — NITROSTUD 211. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1, channel shaped studs, Min 2-1/2 in. deep, formed of min 25 MSG galv steel max stud spacing 24 in. CC. Studs to be cut 3/4 in. less than assembly height. https://database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXUV.U411 &ccnshorttitle=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 OLMAR SUPPLY INC — PRIMESTUD 2I. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item lA (3-5/8 in. wide tack), channel shaped studs, fabricated from min 25 MSG corrosion -protected steel, 1-1/4 in. wide by 3-5/8 in. deep, spaced a max of 24 in. OC. Studs to be cut 3/8 to 3/4 in. less than assembly height. MARINO/WARE, DIV OF WARE INDUSTRIES INC — StudRite'" 2J. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item IH, channel shaped, min 3-5/8 in. wide, spaced a max of 24 in. OC. Studs to be cut 3/8 to 3/4 in. less than assembly height. BAILEY METAL PRODUCTS LTD —Type PLATINUM PLUS 2K. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 11, channel shaped studs, min 3-1/2 in. wide fabricated from min 0.018 in. thick galy steel, spaced a max of 24 in. OC. Studs to be cut 3/4 in. less than assembly height. STEEL INVESTMENT GROUP L L C — AlphaSTUD 2L. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 11, channel shaped studs, Min 2-1/2 in. deep, formed of min 25 MSG galv steel max stud spacing 24 in. OC. Studs to be cut 3/8 to 3/4 in. less than assembly height. DEG BUILDING MATERIALS — OEG Stud 2M. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1K, channel shaped studs, min 2-1/2 in. deep, formed of min. 25 MSG (0.018 in. min. bare metal thickness), spaced a max of 24 in. OC. Studs to be cut 3/4 in. less than assembly height. CALIFORNIA EXPANDED METAL PRODUCTS CO — Viper X 2N. Framing Members* — Steel Studs — As an alternate to Item 2 — For use with Item 1L, channel shaped studs, min depth 2-1/2 in. deep, spaced a max of 24 in. OC. Studs to be cut 3/4 in. less than assembly height. ALLSTEEL & GYPSUM PRODUCTS INC — Type D25 CONSOLIDATED FABRICATORS CORP, BUILDING PRODUCTS DIV — Type D25 QUAIL RUN BUILDING MATERIALS INC — Type D25 SCAFCO STEEL STUD MANUFACTURING CO — Type D25 STEEL CONSTRUCTION SYSTEMS INC — Type D25 UNITED METAL PRODUCTS INC —Type D25 %. Batts;anSBlattkeis*� (DptTonal �MinerohwdoFoT%glass`fiber`Batts°part'iallyorvco`mplefelyfilling=stud-cavity. e ails and1Blankets(B=). 4ateg �fgrtnames:af+manufactu ;� 3A. Fiber, Sprayed* — As an alternate to Batts and Blankets (Item 3) — (1.00% Borate Formulation) — Spray applied cellulose material. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application Instructions supplied with the product with a nominal dry density of 2.7 lb/fit". Alternate Application Method: The fiber is applied without water or adhesive at a nominal dry density of 3.5 Ib/fta, in accordance with the application instructions supplied with the product. U S GREENFIBER L L C — INS735 & IN5745 for use with wet or dry application. INS765LD and INS77OLD are to be used for dry application only. 3B. Fiber, Sprayed* — As an alternate to Batts and Blankets (Item 3) and Item 3A — Spray applied cellulose insulation material. The fiber is applied with water to interior surfaces in accordance with the application instructions supplied with the product. Applied to completely fill the enclosed cavity. Minimum dry density of 4.3 pounds per cubic R. https:lldatabase.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXUV.U411 &ccnshorttitle=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 NU -WOOL CO INC - Cellulose Insulation 3C. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item 3) - Spray applied cellulose fiber. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. The minimum dry density shall be 4.30 Ibs/ft3. INTERNATIONAL CELLULOSE CORP - Celbar-RL Optional, (Direct Attached System), Inner layer attached to studs with 1 in. long Type 5 steel screws spaced 16 in. OC in the field and along the vertical edges. Outer layer attached to the studs over the inner layer with 1-5/8 in. long Type S steel screws spaced 16 in. OC in the field and along the vertical edges and 12 in. OC to the floor and ceiling runners. Joints of screw -attached outer layer offset from inner layer joints.. Joints of outer layer may be taped or untaped. Nom 3/32 in. thick gypsum veneer plaster may be applied to the entire surface of Classified veneer baseboard. Joints reinforced. ACADIA DRYWALL SUPPLIES LTD - Type X, 5/8 Type X, Type Blueglass Exterior Sheathing AMERICAN GYPSUM CO - Types AG-C, AGX-1, M-Glass, AGX-11, LightRoc BEI3ING NEW BUILDING MATERIALS PUBLIC LTD CO - Type DBX-1 CERTAINTEED GYPSUM INC - Types 1, FRPC, EGRG, GlasRoc, GlasRoc-2, Type X, Type X-1, Type C, Type X-2, or 5/8" Easi-Lite Type X CGC INC - Type AR, C, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX, USGX, WRC or WRX CONTINENTAL BUILDING PRODUCTS OPERATING CO, L L C - Types LGFC2A, LGFC6A, LGFC-C/A, LGFC-WD, LGLLX GEORGIA-PACIFIC GYPSUM L L C - Types 5, 6, 9, C, DAP, DD, DA, DAPC, DGG, DS, GPFS6, LS, TG-C, Type X, Veneer Plaster Base -Type X, Water Rated -Type X, Sheathing Type-X, Soft -Type X, GreenGlass Type X, Type X ComfortGuard Sound Deadening Gypsum Board, Type LWX, Veneer Plaster Base -Type LWX, Water Rated -Type LWX, Sheathing Type-LWX, Soffit -Type LWX, Type DGLW, Water Rated -Type DGLW, Sheathing Type- DGLW, Soffit -Type DGLW, Type LW2X, Veneer Plaster Base - Type LW2X, Water Rated - Type LW2X, Sheathing - Type LW2X, Soffit - Type LW2X, Type DGL2W, Water Rated - Type DGL2W, Sheathing - Type DGL2W laildw ATIONAL,GYPSUM•GO = Types. FT-G-FS1GpFS1fT, FSW, FSW-3, FSW-5, FSW-6, FSW-8, FSW-C, FSW-G, FSMR-C, FSL, SSou'fd6reak'XP Type X ;Gypsum Board NATIONAL GYPSUM CO - Riyadh, Saudi Arabia - Type FR, or WR. PABCO BUILDING PRODUCTS L L C, DBA PABCO GYPSUM - Type C, PG-3, PG-5, PG-9, PG-11, PG-C, PGS-WRS PANEL REY S A - Types GREX, PRX, RHX, MDX, ETX, PRC or PRC2 SIAM GYPSUM INDUSTRY (SARABURI) CO LTD - Type EX-1 SAINT-GOBAIN GYPROC MIDDLE EAST FZE - Type Gyproc FireStop, Gyproc FireStop MR, Gyproc FireStop M2TECH, Gyproc FireStop ACTIV'Air, Gyproc FireStop MR ACTIV'Air, Gyproc FireStop M2TECH ACTIV'Air, Gyproc DuraUne, Gyproc DuraLine MR, Gyproc Dural-ine 112TECH, Gyproc Dural-ine ACTIV'Air, Gyproc DuraLine MR ACTIV'Air, Gyproc Dural-ine M2TECH ACTIV'Air https://database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.htmi?name=BXUV.U411 &ccnshorttige=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 THAI GYPSUM PRODUCTS PCL —Type C or Type X UNITED STATES GYPSUM CO — Type AR, C, FRX-G, IP-AR, IP-X1, IP-X2, IPC-AR, SCX, SGX, SHX, ULIX, USGX, WRC, W RX USG BORAL DRYWALL SFZ LLC — Types C, SCX, SGX, USGX USG MEXICO S A DE C V — Type AR, C, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX, USGX, WRC or WRX 4A. Gypsum Board* — (As an alternate to Item 4) — Nam 3/4 in. thick, installed as described in Item 4 with 1-1/4 in. long Type S screws for Inner layer and 2-1/4 in. long Type S screws for outer layer. CGC INC — Types AR, IP-AR UNITED STATES GYPSUM CO — Types AR, IP-AR USG MEXICO S A DE C V — Types AR, IP-AR 4B. Gypsum Board* — (As an alternate to Items 4 and 4A) — 5/8 in. thick, 24 to 54 in. wide, applied horizontally as the outer layer to one side of the assembly. Horizontal joints need not be backed by steel framing. Secured as described in Item 4 for the direct attached system. When used in widths other than 48 in., gypsum panels to be installed horizontally. CERTAINTEED GYPSUM INC — Type X, Type C, Type X-2 CGC INC — Type SHX SAINT-GOBAIN GYPROC MIDDLE EAST FZE — Type Gyproc FireStop, Gyproc FireStop MR, Gyproc FireStop M2TECH, Gyproc FireStop ACTIV'Air, Gyproc FireStop MR ACTIV'Air, Gyproc FireStop M2TECH ACTIV'Air, Gyproc Dural -me, Gyproc DuraLine MR, Gyproc Dural-ine M2TECH, Gyproc DumUne ACTIV'Air, Gyproc Duml-ine MR ACTIV'Air, Gyproc Durat-ine M2TECH ACTIV'Air THAI GYPSUM PRODUCTS PCL — Type X, Type C UNITED STATES GYPSUM CO — Type SHX, FRX-G USG MEXICO S A DE C V — Type SHX 4C. Gypsum Board* — (As an alternate to Items 4, 4A and 4B) — Two layers of 5/8 in. thick gypsum board applied horizontally or vertically. Inner layer attached to studs with No. 6 by 1 in. long Type S bugle head screws spaced 24 in. OC along the top and bottom tracks starting 2 in. and then 12 in. from the vertical edge. Inner layer screws spaced 24 in. OC along the studs, starting 2 in, and then 12 in. from the top and bottom of the studs and starting 1-1/4 in. from the horizontal joints when Installed horizontally. Outer layer attached to studs with 1-5/8 in. long Type S bugle head screws spaced 16 in. OC along the top and bottom tracks starting 1-3/4 in. from the vertical edge. Outer layer screws spaced 16 in. OC along the studs, starting 1-3/4 in. and then 8 in. from the top and bottom of the studs and starting 1-1/4 in. and then 8 in, from the horizontal joints when installed horizontally. Vertical joints centered over studs and staggered one stud cavity on opposite sides of studs. Vertical joints in adjacent layers staggered one stud cavity. Horizontal joints need not be backed by steel framing. Horizontal edge joints and horizontal butt joints on opposite sides of studs need not be staggered. Horizontal edge joints and horizontal butt joints in adjacent layers staggered a min of 12 in. When outer layers are installed horizontally, vinyl or casein, dry or premixed joint compound shall be applied in two coats to joints and screw heads of outer layer. Paper tape, nom 2 in. wide, embedded in first layer of compound over all joints of outer layer panels. Nom 3/32 in. thick gypsum veneer plaster may be applied to the entire surface of Classified veneer baseboard. Joints reinforced. GEORGIA-PACIFIC GYPSUM L L C — Types 5, 6, 9, C, DAP, DD, DA, DAPC, DGG, OS, GPFS6, LS, TG-C, Type X, Veneer Plaster Base -Type X, Water Rated -Type X, Sheathing Type-X, Soffit -Type X, GreenGlass Type X, Type X ComfortGuard Sound Deadening Gypsum Board, Type LWX, Veneer Plaster Base -Type LWX, Water Rated -Type LWX, Sheathing Type-LWX, Soffit -Type LWX, Type DGLW, Water Rated -Type DGLW, Sheathing Type- DGLW, Soffit -Type DGLW, Type LW2X, Veneer Plaster Base - Type LW2X, Water Rated - Type LW2X, Sheathing - Type LW2X, Soffit - Type LW2X, Type DGL2W, Water Rated - Type DGL2W, Sheathing - Type DGL2W https:/Idatabase.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXU V.U411 &ccnshorttitle=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXU V.U411 - Fire -resistance Ratings - ANSI/UL 263 4D. Gypsum Board* — (Not Shown) — (As an alternate to Item 4 when used as the base layer on one or both sides of wall. For direct attachment only to steel studs Item 2B) — Nam 5/8 in. thick lead backed gypsum panels with beveled, square or tapered edges, applied vertically. Vertical joints centered over studs and staggered min 1 stud cavity on opposite sides of studs. Gypsum board secured to studs with 1-1/4 in. long Type 5-12 steel screws spaced 8 in. OC at perimeter and 12 in. OC in the field. RAY -BAR ENGINEERING CORP — Type RB-LBG 4E. Gypsum Board* — (As an alternate to Items 4 through 4D) — Nominal 5/8 in. thick, 4 ft wide panels, applied vertically and secured as described in Item 4. PABCO BUILDING PRODUCTS L L C, DBA PABCO GYPSUM — Types QuietRock ES 4F. Gypsum Board* — (As an alternate to Items 4 through 4E) —5/8 in. thick, applied vertically or horizontally as the outer layer to one side of the assembly. Horizontal joints need not be backed by steel framing. Secured as described in Item 4 for the direct attached system. When used in widths other than 48 in., gypsum panels to be installed horizontally. CERTAINTEED GYPSUM INC — Type SilentFX 4G. Gypsum Board* — As an alternate to Item 4 — Nam. 5/8 in. thick, inner layer attached vertically to studs with 1 in. long Type S steel screws spaced 16 in. OC in the field and along the vertical edges. Outer layer attached to the studs horizontally over the inner layer with 1-5/8 in. long Type S steel screws spaced 16 in. OC in the field and along the vertical edges and 12 in. OC to the Floor and ceiling runners. Joints of outer layer must be taped. Nam 3/32 in. thick gypsum veneer plaster may be applied to the entire surface of Classified veneer baseboard. ACADIA DRYWALL SUPPLIES LTD — Type Blueglass Exterior Sheathing PABCO BUILDING PRODUCTS L L C, DBA PABCO GYPSUM — Types C, PG-11, PGS-WRS 4H. Gypsum Board* — (Not Shown) — (As an alternate to Items 4. For direct attachment only to steel studs Item 2B) — For Direct Application to Studs Only- For use as the base layer on one or both sides of the wall. Nam 5/8 in. thick lead backed gypsum panels with beveled, square or tapered edges, applied vertically. Vertical joints centered over studs and staggered min 1 stud cavity on opposite sides of studs. Wallboard secured to studs with 1-5/8 in. long Type S 12 steel screws spaced 8 in. OC at perimeter and 12 in OC in the field. Lead batten strips required behind vertical joints of lead backed gypsum wallboard and optional at remaining stud locations. Fasteners for face layer gypsum panels when installed over lead backed board to be min 2-1/2 in. Type 5-12 bugle head steel screws spaced as described in Item 4. To be used with Lead Batten Strips (see Item 5A) or Lead Discs (see Item 6A). MAYCO INDUSTRIES INC — Type X-Ray Shielded Gypsum 4I. Gypsum Board* — (As an alternate to Item 4, not for use with Items 1C and 2C or IL and 2N) — Nam. 5/8 in. thick gypsum panels with beveled, square or tapered edges installed as described in Item 4. CGC INC — Type ULX UNITED STATES GYPSUM CO — Type ULX USG MEXICO S A DE C V — Type ULX 4J. Gypsum Board* — (As an alternate to Item 4 when used as the base layer on one or both sides of wall. For direct attachment only to steel studs Item 2B) — Nam 5/8 in. thick lead backed gypsum panels with beveled, square or tapered edges, applied vertically. Vertical joints centered over studs and staggered min 1 stud cavity on opposite sides of studs. Wallboard secured to studs with 1-1/4 in. long Type 5-12 steel screws gypsum panel steel screws spaced 8 in. OC at perimeter and 12 in. OC in the field. Lead batten strips required behind vertical joints of lead backed gypsum wallboard and optional at remaining stud locations. Lead batten strips, min 2 in. wide, max 8 ft long with a max thickness of 0.14 in. placed on the face of studs and attached to the stud with construction adhesive and two 1 in. long Type 5-12 pan head steel screws, one at the top of the strip and one at the bottom of the strip. Lead discs, nominal 3/8 in. diam by max 0.085 in. thick. Compression fitted or adhered over the screw heads. Lead batten strips and discs to have a purity of 99.9% meeting the Federal specification QQ-L-201f, Grade "C". RADIATION PROTECTION PRODUCTS INC — Type RPP - Lead Lined Drywall 4K. Gypsum Board — (As an alternate to Items 4 through 41, not for use with Items 1C and 2C.) — Two layers of nominal 15 mm thick gypsum board applied vertically. Inner layer attached to studs with No. 3.5 x 1-3/8 in. long bugle head, self -drilling screws spaced 23-5/8 in. OC in the field and 15-3/4 in. OC in the perimeter, with the first screw 2 in. from the edge. Outer layer attached to the studs over the inner layer with No. 3.5 x 1-3/4 in. long bugle head, self -drilling screws spaced 11-13/16 in. OC in the field and 7-7/8 in. OC in the perimeter, with the first screw 3/4 in. from the edge. Outer layer screws staggered from inner layer screws. Vertical joints centered over studs and staggered one stud cavity on https://database.ul.com/cgi-bin/XYV/templatefL[SEXT/1 FRAME/showpage.html?name=BXUV.U411 &ccnshorttiUe=Fire-resistance+Ratings+-+ANSI/U... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 opposite sides of studs. Vertical joints in adjacent layer staggered one stud cavity. Self-adhesive fiberglass mesh (9x9 mesh) tape, nom 2 In. wide, applied over all joints of outer layer panels. Dry or premixed joint compound applied In two coats to joints over the mesh tape and screw heads of outer layer. GYPSEMNA CO LLC — Types MRFW, FW, TF 4L. Gypsum Board* — (As an alternate to Items 4 through 4K) — Two layers of 5/8 in. thick gypsum board applied vertically or horizontally. Inner layer attached to studs with #6 x 1 in. long bugle head screws spaced 12 in. OC along the top and bottom tracks and 16 in. OC in the field and along the vertical edges. Outer layer attached to studs with #6 x 1- 5/8 in. long bugle head screws spaced 12 in. OC along the top and bottom tracks and 16 in. OC in the field and along the vertical edges. Vertical joints are centered over studs and staggered between layers and on opposite sides of the wall. Horizontal joints on the face layer are staggered 12 in. from the base layer. Horizontal joints need not to be backed by steel framing. CONTINENTAL BUILDING PRODUCTS OPERATING CO, L L C — Types LGFC2A, LGFC6A, LGFC-C/A, LGFC-WD 4M. Wall and Partition Facings and Accessories* — (As an alternate to Items 4 through 4L) — Nominal 5/8 in. thick, 4 ft wide panels, applied vertically and secured as described in Item 4. PASCO BUILDING PRODUCTS L L C, DBA PASCO GYPSUM — Type QuietRock 527. 4N. Gypsum Board* — (As an alternate to Item 4 through 4M) — For direct application to studs only - Four layers nom. 5/16 in. thick gypsum panels applied vertically or horizontally. When applied horizontally, base layer secured to studs with 1 in. Type S screws spaced 24 in. OC. Second layer Installed with joints offset 12 in. from base layer and secured with 1 in. Type S screws spaced 24 in. OC. Third layer installed with joints in line with base layer and secured with 1-1/2 in. Type S screws spaced 16 in. OC. Fourth layer installed with joints in line with second layer and secured with 1-5/8 in. Type S screws spaced 12 in. OC. For all layers, screws offset 4 in. from previous layer. When applied vertically, base layer secured with 1 in. Type S screws spaced 24 in. OC. Second layer secured with joints offset one stud cavity and secured with 1 in. Type S screws spaced 24 in. OC. Third layer installed with joints in line with base layer and secured with 1-I/2 in. Type S screws spaced 12 in. OC. Fourth layer secured with joints in line with second layer and secured with 1-5/8 in. Type S screws spaced 8 in. OC along vertical edges and 12 in. OC in the field. For all layers, screws offset 4 in. from previous layer. NATIONAL GYPSUM CO — Type FSW S. Lead Batten Strips — (Not Shown, For Use With Item 4D) — Lead batten strips, min 1-1/2 in. wide, max 10 ft long with a max thickness of 0.125 in. Strips placed on the Interior face of studs and attached from the exterior face of the stud with two 1 in. long Type S-12 pan head steel screws, one at the top of the strip and one at the bottom of the strip. Lead batten strips to have a purity of 99.9% meeting the Federal specification QQ-L-201f, Grade "C". Lead batten strips required behind vertical joints of lead backed gypsum board (Item 4D) and optional at remaining stud locations. Required behind vertical joints. SA. Lead Batten Strips — (Not Shown, for use with Item 4H) — Lead batten strips, 2 in. wide, max 10 ft long with a max thickness of0.140 in. Strips placed on the face of studs and attached to the stud with two min. 1 in. long min. Type S-8 pan head steel screws, one at the tap of the strip and one at the bottom of the strip or with one min. 1 in. long min. Type S-8 pan head steel screw at the top of the strip. Lead batten strips to have a purity of 99.50/a meeting the Federal specification QQ-L-201f, Grades "B, C or D". Lead batten strips required behind vertical joints of lead backed gypsum wallboard (Item 6) and optional at remaining stud locations. 6. Lead Discs or Tabs — (Not Shown, For Use With Item 4D) — Used in lieu of or in addition to the lead batten strips (Item 5) or optional at other locations - Max 3/4 in. diam by max 0.125 in. thick lead discs compression fitted or adhered over steel screw heads or max 1/2 in. by 1-1/4 in. by max 0. 125 in. thick lead tabs placed on gypsum boards (Item 4D) underneath screw locations prior to the installation of the screws. Lead discs or tabs to have a purity of 99.9% meeting the Federal specification QQ-L-201f, Grade "C". 6A. Lead Discs — (Not Shown, for use with Item 4H) — Max 5/16 in. diam by max0.140 in. thick lead discs compression fitted or adhered over steel screw heads. Lead discs to have a purity of 99.5% meeting the Federal Specification QQ-L- 201f, Grades "B, C or D". 7. Mineral and Fiber Board* — (Optional, Not Shown) — For optional use as an additional layer on one side of wall. Nom 1/2 in. thick, 4 ft wide with long dimension parallel and centered over studs. Attached to studs and floor and ceiling runners with 1-5/8 in. long Type S steel screws, spaced 12 in. OC. The required UL Classified gypsum board layer(s) is/are to be installed as indicated as to fastener type and spacing, except that the required fastener length shall be increased by a minimum of 1/2 in. Not evaluated or intended as a substitute for the required layer(s) of UL Classified Gypsum Board. HOMASOTE CO — Homasote Type 440-32 8. Furring Channels — (Optional, Not Shown — not for use with Items 4D, 4H, 43, or 4N) — Resilient furring channels fabricated from min 25 MSG corrosion -protected steel, spaced vertically a max of 24 in. OC. Flange portion attached to each intersecting stud with 1/2 in. long Type S-12 steel screws. 8A. Framing Members* — (Optional on one or both sides, Not Shown — not for use with Items 4D, 4H, 43, or 4N) — As an alternate to Item 8, furring channels and Steel Framing Members as described below: a. Furring Channels— Formed of No. 25 MSG galv steel. 2-9/16 in, or 2-23/32 in. wide by 7/8 in. deep, spaced max. 24 in. OC perpendicular to studs. Channels secured to studs as described in Item b. https:lldatabase.ul.com/cgi-binIXYVItemplate/LISEXT/1FRAME]showpage.html?name=BXUV.U411&ccnshorttitle=Fire msistance+Ratings+-+ANSIIU... 8/7/2018 BXUV.U411 - Fire -resistance Ratings - ANSI/UL 263 b. Steel Framing Members* — Used to attach fuming channels (Item 8Aa) to studs. Clips spaced max. 48 in. OC. RSIC-1 and RSIC-1 (2.75) clips secured to studs with No. 8 x 1-1/2 in. minimum self -drilling, S-12 steel screw through the center grommet. RSIC-V and RSIC-V (2.75) clips secured to studs with No. 8 x 9/16 in. minimum self -drilling, S-12 steel screw through the center hole. Furring channels are friction fitted into clips. RSIC-1 and RSIC-V clips for use with 2-9/16 in. wide fuming channels. RSIC-1 (2.75) and RSIC-V (2.75) clips for use with 2-23/32 in. wide furring channels. PAC INTERNATIONAL L L C — Types RSIC-1, RSIC-V, RSIC-1 (2.75), RSIC-V (2.75) 8B. Framing Members* — (Optional on one or both sides, Not Shown — Not for use with Items 4D, 4H, 41, or 4N) — As an alternate to Item 8, furring channels and Steel Framing Members as described below: a. Furring Channels — Formed of No. 25 MSG galy steel. Spaced 24 in. OC perpendicular to studs. Channels secured to studs as described in Item b. Ends of adjoining channels overlapped 6 in. and tied together with double strand of No. 18 AWG galvanized steel wire.Gypsum board attached to furring channels as described In Item 4. b. Steel Framing Members* — Used to attach furring channels (Item a) to studs. Clips spaced 48 in. OC., and secured to studs with 2 in. coarse drywall screw with 1 in. diam washer through the center hole. Furring channels are friction fitted into clips. STUDCO BUILDING SYSTEMS — RESILMOUNT Sound Isolation Clips - Type A237R SC. Steel Framing Members* — (Optional on one or both sides, Not Shown — Not for use with Items 4D, 4H, 41, or 4N) — As an alternate to Item 8, furring channels and Steel Framing Members as described below: a. Furring Channels — Formed of No. 25 MSG galy steel. Spaced 24 In. OC perpendicular to studs. Channels secured to studs as described in Item 8Cb. Ends of adjoining channels overlapped 6 in. and tied together with double strand of No. 18 AWG galvanized steel wire. Gypsum board attached to furring channels as described in Item 4. b. Steel Framing Members* — Used to attach fuming channels (Item BCa) to studs. Clips spaced 48 in. OC, and secured to studs with No. 8 x 2-1/2 in. coarse drywall screw through the center hole. Fuming channels are friction fitted into clips. REGUPOL AMERICA — Type SonusClip 8D. Steel Framing Members* — (Optional on one or both sides, Not Shown — Not for use with Items 4D, 411, 41, or 4N) — As an alternate to Item 8, furring channels and Steel Framing Members as described below: a. Resilient Channels — Formed of No. 25 MSG galy steel, spaced 24 in. CC, and perpendicular to studs. Channels secured to studs as described in Item b. Ends of adjoining channels overlapped 6 in. and secured in place with two No. 8 15 x 1/2 in. Philips Modified Truss screws spaced 2-1/2 in. from the center of the overlap. Gypsum board attached to resilient channels as described in Item 4. b. Steel Framing Members* — Used to attach resilient channels (Item 8Da) to studs. Clips spaced 48 in. OC., and secured to studs with No. 8 x 2-1/2 in. coarse drywall screw through the center hole. Resilient channels are secured to clips with one No. 10 x 1/2 in. pan -head self -drilling screw. KEENE BUILDING PRODUCTS CO INC — Type RC+ Assurance Clip * Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada), respectively. Last Updated on 2018-07-12 Questions? Print this pane Terms of Use Page Top © 2018 UL LLC The appearance of a company's name or product in this database does not In itself assure that products so identified have been manufactured under UL's Follow -Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Fallow -Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non -misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2018 UL LLC". https://database.ul.mmlcgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=BXUV.U411&ccnshorttitle=Fire msistance+Ratings+-+ANSI/... FIRE CAULK JOINT, TYP. (5) LAYERS 5/8" TYPE � GA FILE NO..WP1207 - S PERFORMANCE WITH CC 7" -18 GA. C-CHANNEL FIRE CAULK JOINT, TYP. T' -18 GA. TRACK 5/61, T & G PLYWOOD GA FILE NO. FC4502 T'- 18 GA. J015T (2) LAYERS 1/2" TYPE T DRYWALL FIRE CAULK JOINT, TYP. 60ND BEAM - (1-HK FIRE -RATED) 8" CMU - (1-HP FIRE -RATED) D O N A D I O PROPOOED ••�'•;9�. %w ELECTRICAL ROOM -1-HR. CEILING &Associates,.AmhiteetsP.A. MANUFACTURING V.A� ,& 60917[h 6treec. �:1M. lA Veea Desch FLD2960 BUILDING a e•me.� n n Na Te1.772.7942929 FOR fr*. F772562600 3o'le.W LkmeeW..AA000M36 PURSUITB0AT5 0 "` 5K 1 ~Aonadlo.rehcom " „� ._ , ,. cownan MT ..conmx.m A—.A:e ew.uaxl:r.a....m PROPRIETARY'' STEEL CHANNEL JOISTS, PLYWOOD FLOOR, GYPSUM WALLBOARD CEILING Base layer 1/2" proprietary type X gypsum wallboard applied at fight angles to channel shaped, minimum 7" deep, 18 gage galvanized steel joists 24" o.c. with 1" Type 5-12 drywall screws 8" o.c. at butt joints and 12" o.c. at Intermediate joists. Face layer 1/2" proprietary type X gypsum wallboard applied at right angles to joists with 1 1/2" Type G drywall screws at butt joints between joists and 1 518" Type S-12 drywall screws 12" o.c. at intermediate joists. Joints offset from base layer joints. Steel joists supporting 518" T $ G edge plywood floor applied at right angles to joists with 1 15116" No. 6-20 S-12 point screws 6" o.c. at floor perimeter and and joints and 10" o.c. at intermediate joists. For alternate floor systems, consult manufacturer. PROPRIETARY GYPSUM BOARD American Gypsum Company CertainTeed Gypsum, Inc. G-P Gypsum Leferge North America Inc. National Gypsum Company PABCO Gypsum United States Gypsum Company 11r FIREBLOC TYPE C 1/2" ProRom Type C Gypsum Panels 112" ToughRockS Fireguard® C 112% Firecheck@ Type C 1W Gold Bond@ Brand FIRE -SHIELD GTm Gypsum Wallboard 1/2" FLAME CURB® Super'C' 1W TG-C 1/2",SHEEIROCKO Brand Gypsum Panels, FIRECODES C Core tContact the manufacturer for more detailed information on proprietary products. 7 Approx. Ceiling Weight: 4 pet Fire Test: Based on UL R3660-7, -8, 11-12-87; UL R1319-133, 7-16 75; UL R7094, 90NK10635, 10-24-90; UL Design L524 GA-600-2015 FIRE RESISTANCE DESIGN MANUAL 45 GA FILE NO. WP 1204 GENERIC 1 HOUR 40 to 44 STC FIR I SOUND GYPSUM WALLBOARD, STEEL STUDS Base layer 1/2" type X gypsum wallboard or gypsum veneer base applied parallel to each side of 3-112", 33 mll (20 ga.), steel studs 24" o.c. with 1-5/8" Type S-12 drywall screws 12" o.c. Face layer 1/2" type X gypsum wallboard or gypsum veneer base applied parallel to each side with 1-518" Type S-12 drywall screws 12" o.c. Studs attached to each side of floor and ceiling runners by welding or _ with 112" Type S-12 pan head screws. Thickness: 6-1/2" Joints staggered 24" each layer and side. Approx. Weight: 9 psf Bracing: All design details enhancing the structural integrity of the wall assembly, Fire Test: UL NC505-1, 82NK16158, including the axial design load of the studs, shall be as specified by the steel 7-29-82 stud designer and/or producer, and shall meet the requirements of all applicable - local code agencies. Where required for lateral support of studs, support may be UL Design U425 provided by means of steel straps, channels or other similar means as specified Sound Test: See WP 1615 In the structural design. Tested at 100 percent of design load. (Passed 90 (NGC 2250, 1-3-68) minute fire test.) (LOAD -BEARING) GYPSUM11WALGBOARO[STEEL_STUDS �'•_•_""` -"'•"" Base layer 5/8" Proprietary t a X'-� '-" - Y P P rY yp-gypsam at oard appled parallel or at right angles to ONE SIDE of a 2-1/2", 18 mil (25 ga.), steel studs 24" o.c. with 1"Type S drywall screws 24" o.c. Second layer 518" proprietary type X gypsum wallboard applied parallel or at right angles with 1-518" Type S drywall screws 24" o.c. Face layer 518" proprietary type X gypsum wallboard applied parallel or at right angle to studs with 2-1/4" Type S drywall screws 12" o.c. Thickness: 4 -1/4" Horizontal Joints offset 16" between layers; vertical Joints offset 24" between layers. Approx. Weight: 7 psf Sound tested with 3 518" glass fiber Insulation, in the cavity. (NLB) Fire Test: UL R14196, 12CA37202, 9-27-12, PROPRIETARY GYPSUM BOARD UL Design W415 American Gypsum Company LLC.................. 5/8" FireBloc@ Type X Gypsum Board Sound Test: RAL TL14-259, 7-17-14 "Contact the manufacturer for more detailed information on proprietary products. ClarkDietrich Product Submittal Sheet Product category: S162 (1-516" Flange Structural Stud) Product name: 600S16243 (33ksi, CP60) P - Punched -- 43miis (18ga) Coating: CP60 per ASTM C955 Colorcoding: Yellow Geometric Properties Web depth 6.000 in Flange width 1 625 in Stiffening lip 0.500 in Design thickness 0.0451 in Yield strength, Fy 33 ksi Ultimate, Fu 45.0 ksi Punchout width 1 50 in Punchout length 4.00 In Min. steel thickness 0 0428 in Fy with Cold -Work, Fya 36.3 ksi Gross Section Properties of Full Section, Strong Axis Cross sectional area (A) 0.447 in' Member weight per foot of length 1.52 Ib/ft Moment of inertia (Ix) 2.316 in Section modulus (Sx) 0.772 in3 Radius of gyration (Rx) 2.277 in Gross moment of inertia (ly) 0.148 W Gross radius of gyration (Ry) 0.576 in Effective Section Properties, Strong Axis Effective Area (Ae) 0,256 in' Moment of inertia for deflection (Ix) 2,316 in' Section modulus (Sx) 0.767 in' Allowable bending moment (Ma) 16.68 in-k Allowable moment based on distortion buckling (Mad) 14.47 in-k Allowable shear force in web (solid section) 1416lb Allowable shear force in web (perforated section) 1240 lb Unbraced length (Lu) 39.0 in Torsional Properties St. Venant torsion constant (J x 1000) 0.303 in4 Warping constant (Cw) 1,095 in' Distance from shear center to neutral axis (Xo) -1 062 in Distance between shear center and web centerline (m) 0 670 in Radii of gyration (Ro) 2.577 in Torsional flexural constant (Beta) 0.830 ASTM & Code Standards: • AISI North American Specification (NASPEC) S100-12 • • Effective properties incorporate the strength increase from the cold work of forming • Gross properties are based an the cross section away from the punchouts • Structural framing is produced to meet or exceed ASTM C955 • Sheet steel meets or exceeds mechanical and chemical requirements of ASTM A1003 • ClarkOietnch's structural and nonstructural framing comply with the SFIA Code Compliance Certification Program. ICC-ES ESR-1166P and Intertek CCRR-0206 • For installation & storage information refer to ASTM C1007 • SDS & Product Certification Information is available at ( 2L dark eetnch com 05.40.00 (Cold -Formed Metal Framing) r- — Used in framing applications: • Load -bearing walls • Curtain wails • Tall interior walls • Floor & ceiling joists -Trusses I Q i Oil- -1 Structural Punchout East market pun&out spacing: 12" from lead end then 24" o.c 'Nest market punchout spacing: 24" from lead end then 24" o c. Sustainability Credits: For more details and LEED letters tnn:act Technical Services at 888-t37-3244 ar ins,[ .wnw.dari�•�e:ncamm/LEED I FFn v4 PAR Credit - aulding Praduct Disdosum and Optirmzathn: EPO 0 mn0 - Swrang of Raw Materials (1 pant) - Matenai Ingredients (1 pant) - Canshzbon am Demclidon Waste Management (up to 2 pants) - Innovation Credit (up to 2 po!nts). LF_ED 2009 credit MR 2 & MR 4 - ClarkMetndl's steel products are 100% reryciable and have a natcnat average recyded content of 34.2% (19 8%Post c St car and 14 4% l tecansumer). if seeking a higher number to meet Credit MR 5, please caned us at (�n.•agciarkoelnw min f 888-437-3244) Project Information Contractor Information Architect Information Name- Name: Name: AddressContact correct: Prone: Phone: Fax. Fax: Product Submittal Sheet MlaxTrak® 2D (SLT/H) Slotted Deflection and Drift Track for structural wall framing The IvlaxTrak 2D (SLT/H) system is a head -of -wall deflection track that Is used for framing exterior curtain walls and non -load bearing interior walls This system allows for vertical live load movement and horizontal seismic drift of the primary structure. The slots in the track's legs are designed for a total allowable vertical movement of 1-1/2" (314" t/-). The MaxTrak 2D system is attached to the wall studs through vertical slots using waterhead screws creating a positive connection that allows for vertical movement and also eliminates the requirement for lateral bracing near the top of the wall stud. The slots in the web, used for seismic design, are 4" long and spaced at 8" on center, staggered along the length of the member The MaxTrak 20 system must be designed to take the end reaction of the wall studs (point loads) by using the allowable loads below. Product Data & Ordering Information: Material: Yield Strength: Grade 33ksi for 33mils & 43mils Yield Strength: Grade 50ksi for 54mils & 68mils Coating: CP60 per ASTM C955 (G90 available) 33mils: 20ga STR, 0.0346" Design Thickness. 0.0329" Min. Thickness 43mils. 18ga, 0-0451" Design Thickness, 0.0428" Min. Thickness 54mils: 16ga. 0.0566" Design Thickness. 0.0538" Min. Thickness 68mils: 14ga, 0.0713" Design Thickness, 0.0677" Min. Thickness Dimensions: 2-1/2" legs with an inside depth equal to the depth of the stud Available in 2-112", 3-5/8", 4", &' and 8" wide systems Vertical slots in leg are 0,22" wide x 1-112" long and spaced 1"o.c. Horizontal slots in web are 0 22" wide x 4" long and spaced 8" o.c. Track length = 1 V-0" ASTM & Code Standards: • ASTM A1003, C645. UK C955, C1002. C1007, E119. E814 and E1966. • Intertek CCRR-0205 • ANSI I UL 2079 and MaxTmk UL approved systems (See UL Fire Resistance Directory 42XE). • SDS & Product Certification information is available at www cIarkdietrich.conu'SuppodDecs - The minimum wall stud thickness must be equal to the selected slotted track thickness. - A8 min, wafer head screws shall be used for 33mil material s shims. B10 min wafer head screws for 43mit and thicker sections - MaxTmk allowable lateral loads are based on a maximum gap between the top of the stud and the web of the track of 718' 05.40.00 (Cold -Formed Metal Framing) • Allows up to 1-1/2" (3W' +1-) vertical deflection • Allows up to 4" (2" +1-) horizontal drift • Intertek CCRR-0205 • UL Approved 1 & 2 hour systems • Guideline at center of vertical slots Calculating slip Mack point load: Pant Load(P) _ .nM p!i5v-e �SF'r• zyury Iv!'.ed3 i.iM 21:,]!I F'r caa%e' :e_:cFr•q 33 FSr. k95f + :=31 : yes Sustainability Credits: For -!ore Beta Is arc LEED leaers co, -,act. Techr.cai Se:mces at 838-437-3244 or ar5:k w.nv.dacxes:rcr.t ,LEED LEED v4 MR Credit— Building Product Disclosure and Opanzation. EPD (1 point) - Sourcing of Raw Mew its (1 point) - Material Ingrec�enrs I pant) - Construction and Demolition Waste Management (up m 2 points) - Irnovabcn Credit (up to 2 poms) LEED 2009 Credit MR 2 & MR 4 — Cla kDremch'a steel woduas are 100% recyclable end have a national average recycled content of 34.2% (19 8% postcensurrler and 14 4lv pmconsurxin If seeking a higher numter ro met Credit MR 5, please =tact us at (sb„Erlarkd:e.".cn cc^. i 888 437-3244) Information Contractor Information Architect Information —� IProject Name Name. Name, Address: Correct Contact Prom Phone' Fax: Fax SLTH-STR 0 10/2018 ClarkDietrich Butting Systems Description Installation Recommendations Gold Bond' BRAND Fire -Shield' Gypsum Board consists of a fire- resistant gypsum core with a heavy, natural finish and 100-percent recycled paper on the face and back sides. The face paper folds around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth. Use it for interior, fire -rated wall and ceiling applications. A specially formulated Type C core is also available where required. For speed of installation, GridMarX' guide marks are printed on the paper surface. Finishing: Long edges of the boards are tapered or square. Tapered edges allow joints to be reinforced with ProForm-r BRAND Joint Tape and concealed with ProForrm9 BRAND Ready Mix Joint Compounds or ProForW BRAND Quick SetTM Setting Compounds. Basic Uses APPLICATIONS Use 1/2 in. (12.7 mm) Type C and 5/8 in. (15.9 mm) Fire -Shield" Gypsum Boards on walls and ceilings in fire -rated construction where the framing members are spaced up to 24 in. (610 mm) o.c. ADVANTAGES Approved component in specific UL-rated designs. • Lightweight and cost-efficient material that is compatible with a wide range of decorative finishes. • Cuts easily for quick installation, permitting painting or other decoration and the installation of metal or wood trim almost immediately. • Fire-resistant material with a gypsum core that will not support combustion or transmit temperatures greatly in excess of 212'F (100•C) until completely calcined, a slow process. • Dimensionally stable under changes in temperature and relative humidity and resists warping, rippling, buckling and sagging. • 518 in. Fire -Shield products provide 1-hour fire ratings with fewer fasteners using MaX 12, the 12 in. o.c. optimized fastener pattern for perimeter and field in UL designs U420, U465, V417, V438, V450, V482, V483, V486, V488, W417, W421, and W444. Save time, money and installation costs with Max 12. Visit MaX12.com for more information. • Features the GridMarX'' preprinted fastening guide on the board to allow for faster and more accurate installation. • Achieves GREENGUARD and GREENGUARD Gold Certification. GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit: ul.com/gg. • Qualifies as a low-VOC emitting material by meeting California Specification 01350. For more information, visit: http://wv4w.calrecycle.ca.gov/greenbuilding/specs/ section01350/. GENERAL Install gypsum board in accordance with methods described in ASTM C840 and GA-216. Examine and inspect framing materials to which gypsum board is to be applied. Remedy all defects prior to installation of the gypsum board. GridMarX provides quick identification and uniform nail/screw patterns. Use GridMarX to make accurate cuts without drawing lines. GridMarX guide marks run the length of the board at five points in 4 in. (102 mm) increments. Marks run along the edge in both tapers and at 16 in. (406 mm), 24 in. (610 mm) and 32 in. (813 mm) in the field of the board. The marks cover easily with no bleed -through using standard paint products. Apply gypsum board first to ceilings at right angles to framing members, then to walls. Use boards of maximum practical length so that the minimum number of end joints occur. Bring board edges into contact with each other but do not force into place. Install batt or blanket ceiling insulation BEFORE the gypsum board on ceilings when installing a vapor retarder behind the gypsum board. Install the insulation IMMEDIATELY after the gypsum board when using loose fill insulation. Avoid installation practices that might allow condensation to form behind boards. Cut gypsum board to allow for a minimum 1/4 in. (6.4 mm) gap between gypsum board and Floor to prevent potential wicking. • Locate gypsum board joints at openings so that no joint will occur within 12 in. (305 mm) of the edges of the opening unless installing control joints at these locations. Stagger vertical end joints. Joints on opposite sides of a partition should not occur on the same stud. • Hold gypsum board in firm contact with the framing member while driving fasteners. Fastening should proceed from center portion of the board toward the edges and ends. Set fasteners with heads slightly below the surface of the board. Take care to avoid breaking the face paper of the gypsum board. Remove improperly driven nails or screws. Job Date: (Insta143tlon Reccanmendarians cwOnued on page 3) TECHNICAL DATA Thicknessl, Nominal Widths, Nominal Lengthl,4, Standard Weight, Nominal Edgesl Flexural Strengthl, Perpendicular Flexural Strengthl, Parallel Humidified Deflectionl Nail Pull Resistancel Hardnessl - Core, Edges and Ends 1/2'(12.7 mm) 4' (1,219 mm) 8' - 12' (2,438 mm - 3,658 min) 1.9 lbs./sq. ft. (9.28 k/m') Square or Tapered >_ 1071bf. (476 N) > 36 lbf. (160 N) _s 10/8" (31.8 mm) >- 771bf. (343 N) >_ 11 lbf. 1,49 N) S/8" (15.9 mm) 4' (1,219 mm), 54" (1,372 mm) 8' - 12' (2,438 mm - 3,658 mm) 2.2 lbs./sq. ft. (10.74 k/m') Square or Tapered >- 147 lbf. (654 N) 2 46 Ibf. (205 N) <_ 5/8" (15.9 mm) >_ 87 lbf. (387 N) >_ 11 lbf. (49 N) 5/8" (15.9 mm) 4' (1,219 mm), 54" (1,372 mm) 8' - 12' 2,438 mm - 3,658 mm) 2.3 lbs./sq. ft. (11.23 k/m') Square or Tapered >_ 147 lbf. (654 N) >_ 46lbf. (20S N) 5 5/3" (15.9 mm) >- 87 lbf. (387 N) >- 11 lbf. (49 N) Bending Radius 10' (3,048 mm) 15' (4,572 mm) 15' (4,572 mm) Thermal Resistances R = .45 R = .56 R = .56 Product Standard Compliance ASTM C 1396 ASTbi C 1396 ASTM C 1396 Fire -Resistance Characteristics Core Type Type C NYg4X.- Type C UL Type Designation . FSW-C F:WW7, , FSW-C Combustibility2 Non -combust ble Core Non-combustible Core Non-combustible Core Surface Burning Characterfstics3 Class A Class A Class A Flame Spread3 15 15 15 Smoke Development3 0 0 0 Applicable Standards and References ASTM C473 Standard Test Methods for Physical Testing of Gypsum Panel Products ASTM CS18 Standard Test Method for Steady -State Themial Transmission Properties by Means of the Heat Flow Meter Apparatus ASR-I C840 Standard Specification for Application and Finishino of Gypsum Board ASTM C1396 Standard Specification for Gypsum Board ASTAI E84 Standard Test Method for Surface Burning Characteristics of Building Materials ASTA1 E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750'C Gypsum Association, GA-214, Recommended Levels of Faisn for Gypsum Beard, Glass Mat and Fiber -Reinforced Gypsum PaneLc Gypsum Association, GA-216, Applicator, and Finishing of Gypsum Parel Products Gypsum Association, GA-238, Guidelines for Prevenhen of blold Growth on Gypsum Board National Gypsum Company, NGC Construction Guide 1. Specified values per ASTM C1396, tested in accordance with ASTM C473. 2. Tested in accordance with ASTM E136. 3. Tested in accordance with ASTM E84. 4. Please consult your local sales representative for all non-standard lengths and widths. Minimum order requirements may apply. 5. Tested in accordance with ASTM C5IS. E (Installation Remmmendabons continued from page t; Limitations • Provide minimum 1/4 in. (6.4 mm) clearance between boards and adjacent concrete or masonry to minimize wicking of moisture. • Maintain a room temperature of not less than 40•F (4°C) during application of gypsum board. • Maintain a room temperature of not less than 50°F (10"C) when using adhesive to attach the gypsum board and during joint treatment, texturing and decoration, beginning 48 hours prior to application and continuously thereafter until completely dry. Maintain adequate ventilation in the working area during installation and curing period. FINISHING Refer to GA-214, Recommended Levels of Finish for Gypsum Board, Glass Mat and Fiber -Reinforced Gypsum Panels, to determine the level of finishing needed to assure a surface properly prepared to accept the desired decoration. DECORATION Ensure gypsum board surfaces, including finished joints, are dean, dust -free and gloss -free to achieve best painting results. Apply a coat of quality drywall primer to equalize the porosities between surface paper and joint compound, improving fastener and joint concealment. Selection of a paint to provide desired finish characteristics is the responsibility of the architect or contactor. CRITICAL LIGHTING AREAS Wall and ceiling areas abutting window mullions or skylights, long hallways, and atriums with large surface areas washed with artificial or natural lighting are a few examples of critical lighting areas. Strong side lighting from windows or surface -mounted light fixtures may reveal minor surface imperfections. Light striking the surface obliquely, at a slight angle, exaggerates surface irregularities. If you cannot avoid critical lighting, minimize the effects by skim coating the gypsum board surfaces, by decorating the surface with medium to heavy textures, or by the use of draperies and blinds, which soften shadows. In general, paints with sheen levels other than Flat, enamel paints and dark -toned paint finishes highlight surface defects; consider the use of textures to hide these minor visual imperfections. • Avoid exposure to excessive or continuous moisture and extreme temperatures. Do not expose gypsum board to temperatures exceeding 125"F (52°C) for extended periods of time. • Properly ventilate or condition attic spaces to remove moisture buildup above gypsum board ceilings. If required, install a vapor retarder in exterior ceilings behind gypsum board. • Avoid installing gypsum board directly over insulation blankets with facer Flanges placed continuously across the face of the framing members; recess insulation blankets and attach Flanges to the sides of framing. • Isolate gypsum board from contact with building structure in locations where structural movement may impose direct loads on gypsum board assemblies. • Provide control joints spaced not more than 30 ft. (9,144 mm) where employing long continuous runs of walls, partitions or ceilings without perimeter relief. • Avoid gypsum board joints within 12 in. (305 mm) of the corners of window or door frames unless installing control joints at these locations. • Space supporting framing for single -layer application of 1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) gypsum board a maximum of 24 in. (610 mm) o.c. • To prevent objectionable sag in gypsum board ceilings, the weight of overlaid, unsupported insulation should not exceed the following recommendations: ^TYR_eJr— Pe X _YpeC - Thickness, Nominal 5/8" 1/2" 518" (15.9 mm) (12.7 mm) (15.9 mm) Framing Spacing 24" O.C. 24" o.c. 24" o.c. (610 mm) (610 mm) (610 mm) Thickness, Nominal 2.2 psf 1.3 psf 2.2 psi (10.7 kg/W) (6.3 kg/m') (10.7 kg/m') For More Information ARCHITECTURAL SPECIFICATIONS National Gypsum Company's CSI MasterFormat® 3-part guide specifications are downloadable as editable Microsoft@ Word documents at: nationalgypsum.com. LATEST INFORMATION AND UPDATES For the latest technical information and updates, call NGC Construction Services: 1-800-NATIONAL (628-4662) or visit our website: nationalgypsum.com. Gold Nati�s m�®�dNO �, GypsamBoard 2001 Rexford Road Charlotte, NC 28211 (704)365-7300 NationalGypsum.com AskForPurple.com 111098 Rev. 11/18 OWENS CORNING WORLD HEADQUARTERS One Owens Coming Parkway Toledo, Ohio 43659 419.248.8000 March 13, 2020 Re: Owens Corning Insulation in UL rated assemblies To Whom It May Concern: Owens Corning fiberglass batt insulation is listed in category BZJZ file R3576 with Underwriters Laboratory. Insulation in this category will be called out as optional in wall assemblies, meaning that Owens Corning insulation that has the UL Label printed on the bag can be used in these assemblies. Owens Corning unfaced insulation is not required to carry this label and is still accepted in any assembly listing BZJZ products as optional. Should you have any additional questions, please contact the GETTECH Team at GETTECH@owenscorning.com. Respectfully, A Li ,i Ze i 1,2r Alicia Zeiler GETTECH Specialist Owens Corning OWENS CORNING EcoTouch® PINK® Fiberglas ® Insulation with PureFiber Technology Contractor Owens Corning' EccTouch' Insulation with PureFiber Technology is flexible light density insulation with a variety of facings and uses for thermal and acoustic benefis. EcoTouch' Insulation is dimensionally stable and will not slump within the cavity. Due to its inorganic fibers, EcoTouch' Insulation is not a food source for mold, it will not rot or mildew and it is not corrosive to steel, copper or aluminum. Type Blankets without membrane coverings. Type 11 Blankets vain noneffective membrane coverings: Class A Membrane -faced surface flame spread of 25 or less. Class B Membrane -faced surface vnth critical radiant flux of 0.12 w/cm' (0.11 Btu/ftlxs) or greater. Class C Membrane4aced surface not rated for flame propagation resstance Category Membrane is a vapor retarder. Categoryl Membranes not a vapor retarder Type III Blarketsvrith reflective membrane.overings: Class A Membrane -faced surface flame spread of 25 or less. Cfass9 Membrane -faced surface in critical radiant flux of 0.12 w/ crd (0.11 B!u/ft=xs) or greater. Class C Membrane -faced surface not rated for flame propagation resistance Category Membane;s a vapor retarder. Category Membrane s not a vapor retarder. Unfaced—EcoTouch' Batt Insulation Fiberglass insulation designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in wood or metal framing to allow for friction fit installation. Different sizes available to fit specific applications. • ASTM C665 Type 1 • ASTM E84 <25/<50 • ASTM C1338 Mold/mildew resistant • ASTM E136 Non -Combustible • ASTM C518 • ASTM E90, E413 (3111', 61/4!1) • }1L File #BKNV 3576 (Fire rated assemblies) ® R-11 31h" ❑ R-25 8" ❑ R-13 31h" ❑ R-30C BV4" ❑ R-15 31/2" ❑ R-30 91/1' ❑ R-19 61/4" ❑ R-38C 107/4" ❑ R-20 51/2 ❑ R-38 12" ❑ R-21 51h" ❑ R-49 14" ❑ R-22 63/4" Project Kraft Faced—EcoTouch' Batt Insulation Fiberglass insulation designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in wood or metal framing to allow for friction fit installation. Flanges can be inset or face stapled as needed. Different saes available to fit speck applications. • ASTM C665 Type 11, Class C • ASTM E84 Not rated • ASTM C1338 Mold/mildew resistant • ASTM C518 • ASTM E90, E413 (3W', 61/4") • ASTM E96 Perm Rating -1 perm ❑ R-11 W2" ❑ R-22 63/4" ❑ R-13 3112" ❑ R-30C 81/4" ❑ R-15 31/2" ❑ R-30 91f2" ❑ R-19 61/e' ❑ R-38C 101/4" ❑ R-20 511e ❑ R-38 12" ❑ R-21 5112" ❑ R-49 14" Unfaced— EcoTouch' Sound Attenuation Batts Fiberglass insulation with PureFiber Technology designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in metal framing to allow for friction fit installation. Different sizes available to fit specific applications. • ASTM C665 Type I • ASTM E84 <25/<50 • ASTM C1338 Mold/mildew resistant • ASTM E136 Non -Combustible • ASTM C518 • ASTM E90, E413 (21/2", 31/2') • UL File #BKNV 3576 (Fire rated assemblies) ❑ R-8 21h" ❑ R-11 31h" FSK or PSK E Faced—EcoTouch' Flame Spread 25 Batt Insulation Fiberglass insulation with facing that can be left exposed that is designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in wood or metal framing to allow for friction fit installation. Flanges can be inset or face stapled as needed. Different sizes available to fit specific applications. • ASTM C665 Type II (PSK) or Type III (FSK), Class A • ASTM E84 <25/<50 • ASTM C1338 Mold/mildew resistant • ASTM C518 • ASTM E96 Perm Rating -.5 perm • UL File #BKNV 3576 (Fire rated assemblies) FSK ❑ R-13 31h" ❑ R-30 9V2' ❑ R-19 61/4" ❑ R-381/F ❑ R-21 51/2" PSK-E ❑ R-19 61/4" ❑ R-30 9112" FSK-E ❑ R-13 31h" ❑ R-30 91/2" 11 R-19 61/4" Foil Faced—EcoTouch' Batt Insulation Fiberglass insulation designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in metal framing to allow for friction fit installation. Flanges can be inset or face stapled as needed. Different sizes available to fit specific applications. is ASTM C665 Type III, Class B and C is ASTM E84 75/150 • ASTM C1338 Mold/mildew resistant • ASTM 0518 • ASTM E90, E413 (31/2", 61/a') • ASTM E96 Perm Rating 0.5 ❑ R-11 31h" ❑ R-19 61/4" ❑ R-13 31h" ❑ R-30 91h" ❑ R-15 31/2" Kraft Faced— PROPINK' FastBatt- Insulation Fiberglass insulation with PureFiber Technology designed to improve thermal and acoustic performance of wall and roof/ceiling assemblies. Fits tightly in wood framing to allow for friction fit installation. Different sizes available to fit specific applications. • ASTM C665 Type II, Class C • ASTM E84 not rated is ASTM C1338 Mold/mildew resistant • ASTM C518 is ASTM E90, E413 (31h", 61/i') • ASTM E96 Perm Rating -1 perm ❑ R-13 31h" ❑ R-19 61/4" ❑ R-15 Th" ❑ R-21 51h" Unfaced— EcoTouch• Sonobatts' Insulation Fiberglass insulation with PureFiber Technology designed to improve thermal and acoustic performance of suspended ceiling assemblies. 24" x 48" to fit on top of most drop in ceiling tiles. • ASTM C665 Type I • ASTM E84 <25/<50 is ASTM C1338 Mold/mildew resistant • ASTM E136 Non -Combustible • ASTM C518 • ASTM E90, E413 (31/i', 61/4") • UL File #BKNV 3576 (Fire rated assemblies) ❑ R-11 Te ❑ R-19 61/4" Kraft Faced— _./Touch• Sonobatts• Insulation Fiberglass insulation with PureFiber Technology designed to improve themlal and acoustic performance of suspended ceiling assemblies. 24" x 48" to fit on top of most drop in ceiling tile. • ASTM C665 Type II, Class C • ASTM E84 Not Rated • ASTM C1338 Mold/mildew resistant • ASTM E96 penn Rating -1 perm • ASTM C518 • ASTM E90, E413 ❑ R-11 31/2" ❑ R-19 61/4" ❑ R-13 31/1' Unfaced—EcoTouch' QuietZone' Acoustic Batt Insulation Fiberglass insulation designed to improve acoustic performance of wall assemblies. Fits tightly in wood framing to allow for friction fit installation. Different sizes available to fit specific applications. • ASTM C665 Type I • ASTM E84 <25/<50 • ASTM C1338 Mold/mildew resistant • ASTM E136 Non -Combustible • ASTM E90, E413 (31M', 51/1') • UL File #BKNV 3576 (Fire rated assemblies) ❑ 31h" ❑ 51/i' Kraft Faced—EcoTouch' QuietZone' Acoustic Batt Insulation Fiberglass insulation designed to improve acoustic performance of wall assemblies. Fits tightly in wood framing to allow for friction fit installation. Flanges can be inset or face stapled as needed. Different sizes available to fit spec applications. • ASTM C665 Type 11, Class C • ASTM E84 Not Rated • ASTM C1338 Mold/mildew resistant • ASTM E90, E413 (319) • ASTM E96 Perm Rating -1 perm • UL File #BKNV 3576 (Fire rated assemblies) ❑ 31/2" Visit wm achu6dngspeccom m acmes a salty of lemw,g, appfcatw snit design M606ceam build your spec Far cunem produsY mAebAiry, please cmtact an Owens Comm 9 D,vnbumr ar Area sales Manager. Certifications and Sustainable Features is Unfaced EccTouch' Insulation and Kraft -Faced EcoTouch' Insulation are participating in Declare and are Living Building Challenge Compliant • Certified by SCS Global Services to contain an average of 55% recycled glass content, 18% pre -consumer and 37% post- AIMV �, `4e�c 1r,rG consumer a r pr �j tl • GREENGUARD Certified products are certified to - f Ada GREENGUARD standards for low chemical emissions into ` �•, indoor air during product usage. For more information, 1r visit ul.com/gg -- • Environmental Product Declaration (EPD) has been certified by"- UL Environment • Material Health Certificate from Cradle to Cradle Products Innovation Institute Disclaimer of Liability Tecllmcalinlo,maeon comainad herein is funushad wthaut chargn orobfpaWn and is given and azcepmd az redpiam's sole risk aecause cond'm0,mal use may vary snit arebeyontl wr control. Owens Caningmates no mpmm,ebouband iss, respo,rsibleor 6ebb fordeacmecy orre4ab,Tity of dale aesociNedwdh ithP par4cdar uses al ant produn deamibetl Mein SCS Glahal Servssa Wwdes mdepen,lenl vsrlf, tds of ss,,Isd wsle in balding matenala and sftss recydsdc lass lobos made by rh3hv cured For mmeirdomwion. aitit wwwSCSglobalaerrices.cam. OWENS CONNING RISU"TING SYSTEMS, LLC ONE OW ENS CORNING PARKWAY TOLEDO. CHID, USA 43659 is 1.600•GET-0INN` vww.pafanfwmine•4•m Pub. No. 10019001A. Forted in U.SA July 2018. THE PINK PANTHER-' A 0 196--2018 Melro Galdwyn-M-11 Studios lnc Ali 1Lghts Reserved. The c01ar PINK is a,nielered tademark of Owens Coming 120180 W% Coming. All Rights Reserved. Pursuit Boats Plant Expansion Fire Joint Systems Submittal Details March 15, 2020 8/24/2015 XHBN.H W-D-0262 - Joint Systems Page Bottom System No. HW-D-0262 XHBN.HW-D-0262 Joint Systems Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements covering the installation and use of UL Certified products, equipment, system, devices, and materials. Authorities Having Jurisdiction should be consulted before construction. Fire resistance assemblies and products are developed by the design submitter and have been investigated by UL for compliance vdth applicable requirements. The published information cannot alveys address every construction nuance encountered in the field. When field issues arise, it is recommended the first contact for assistance be the technical service staff provided by the product manufacturer noted for the design. Users of fire resistance assemblies are advised to consult the general Guide Information for each product category and each group of assemblies. The Guide Information includes specifics concerning alternate materials and alternate methods of construction. Only products which bear UL's Mark are considered Certified. See General Information for Joint Systems XHBN - Joint Systems System No. HW-D-0262 June 28, 2011 Assembly Ratings - 1 and 2 Hr (See Item 2) L Rating At Ambient - Less Than 1 CFM/Lin Ft (See Item 3C) L Rating At 4OO-F - Less Than 1 CFM/Lin Ft (See Item 3C) Joint Width - 5/8 in. Maximum Class II and III Movement Capabilities - 250/6 Compression or Extension 8/24/2015 (3A r � �J `2A XHBN.H W-D-0262 - Joint Sgste Alternate Floor Assembly r A - % P9I1 cv ' r 3B� 8/24/2015 XHBN.H W-D-0262 - Joint Systems SECTION M 1. Floor Assembly — The fire rated fluted steel deck / concrete floor assembly shall be constructed of the materials and in the manner described in the individual Floor -Ceiling Design in the UL Fire Resistance Directory and shall include the following construction features: A. Steel Floor And Form Units* — Max 3 in. (76 mm) deep ga lv steel fluted floor units. B. Concrete — Min 2-1/2 in. (64 mm) thick reinforced lightweight or normal weight concrete, as measured from the top plane of the floor units. IA. Alternate Floor Assembly — Min. 4-1/2 In. (114 mm) thick lightweight or normal weight (100-150 pcf or 1600-2400 kg/m3) concrete slab. 2. Wall Assembly —The 1 hror2 hr fire rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner described in the Individual U400 and V400 Series Wall and Partition Designs In the UL Fire Resistance Directory. When steel floor and forth units are used, wall to be perpendicular to or parallel with and centered underthe valleys of the steel floor units as shaven in the above illustrations. The wall shall include the following construction features: A. Steel Floor And Ceiling Runners— Floor and ceiling runners of wall assembly shall consist of galy steel channels sized to accommodate steel studs. Ceiling runner to be provided with min 1-1/4 in. (32 mm) flanges. Ceiling runnersecured to steel floordeck with steel fasteners or welds spaced max 12 in. (30S mm) OC or to slab With masonry anchors spaced max 12 in. (305 mm) OC. B. Studs— Steel studs to be min 3-5/8 in. (92 mm) wide. Studs cut 1/2 in. to 3/4 in. (13 to 19 mm) less in length than assembly height With the bottom nesting in and resting on floor runnerand with the top nesting in ceiling runnerwithout attachment. Stud spacing not to exceed 24 in. (610 mm) OC. C. Gypsum Board*— Gypsum board sheets installed to a min total thickness of 5/8 in. (16 mm) and 1-1/4 in. (32 mm) on each side of wall for 1 hr and 2 hr fire rated assemblies,, respectively. Wall to be constructed as specified in the individual Wall and Partition Design in the UL Fire Resistance Directory, except that the gypsum board is cut to maintain a max 518 in. (16 mm) gap between the gypsum board and the contour of the steel deck floor or concrete floor slab. In addition, the top row of screws shall be installed into the steel studs 1/2 to 1 in. (13 to 25 mm) below the bottom edge of the ceiling runner flange. The hourly fire rating of the joint system is equal to the hourly rating of the wall assembly in which it is installed. 3. Joint System — Max separation between bottom of floor and top of wall is 5/8 in. (16 mm). The joint system is designed to accommodate a max 25 percent compression or extension from its installed width. The joint system consists of the following. A. Forming Material* — For use when wall is constructed perpendicular to steel floor units. Nom 3 in. (76 mm) thick, min 4 pcf (64 kg/m3) density mineral wool batt 8124/2015 XHBN.H W-D-0262 - Joint Systems insulation cut into strips to fill the gap between the top of the ceiling runner and bottom of the steel floor units. Mineral wool cut into strips having a width equal to ceiling runner and length approximately 2-1/2 in. (64 mm) longer than flute bottom length, then compressed into flute cavity. Mineral wool may be omitted when Type A Fill, Void or Cavity Material is used. B. Forming Material— (Optional) — In 2 hr fire rated wall assemblies, foam backer rod friction fit into joint opening and recessed min 5/8 in. (16 mm) from each surface of wall. C. Fill, Void or Cavity Material* —Sealant — Min 5/8 in. (16 mm) thickness of fill material applied vathin joint opening on both sides of well, flush with each surface of gypsum board. UNITED STATES GYPSUM CO —Type A or AS. Note: L Ratings apply only when Type AS fill material is used. *Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada), respectively. Last Updated on 2011-06-28 Questions? Print this page Terms of Use Page Too © 2015 UL LLC The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow -Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-up Service. Always look forthe Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non -misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Oc 2015 UL LLC". http:/ldatabase.ul.cam/cgi-binD(YVItemplatenJSEXTIIFRAMEtshowpage.htrnl?name=XHBN.HW-D-0262&ccnshortt le=Joint+Systems&objid=1075852836&cfg... 414 SUBMITTAL SHEET USG SHEETROCK BRAND ACOUSTICAL SEALANT �r. Makes promised ratings a reality en0a® • Excellent sound -flanking material (supports high STC ratings) aasanaa"o:am•uro� • Superior performance as a fire caulk in UL Classified joint and through -penetration firestop systems -= • Ideal for use in smoke and/or sound assemblies •Meets ASTM C834 specifications for latex sealants r�s 1' "k • Grade-18°C (0°F) low temperature flexibility, strong bond 10 Jo - Low VOC - DESCRIPTION USG Sheetrock' Brand Acoustical Sealant is an acrylic, latex -based sound caulk for use as a sealant in fire -rated partitions, smoke barriers and sound -rated assemblies. HW-0-0262- Conventional Wall HW-D. 0603 - Shaft Wall Floor Floor Ceiling runner r J-runner USE Sheetrock- erantl Acoustical USG Sheetrocke Sealam Brand Acoustical Stud Sealant USG Sheetrock• USG Sheetrock- USG Sheetracic° Brand Gypsum USG Sheelrock• Brand Gypsum Brand Gypsum Panels Brand Gypsum Liner Panel Panels Panels UL SYSTEMS Conventional Wall: BW-5-0013, BW-S-0016, BW-5-0022, BW-S-0026, HW-D-0001, HW-D-0002, JOINTSYSTEMS HW-D-0262, HW-D-0372, HW-D-0372, HW-D-0504, HW-0-05406. HW-D-0513, HW-D-0518, H W-D-0525, H W-D-0577, H W-D-0584, H W-D-0603, H W-D-0609, H W-D-0610, H W-D-0611, H W-D-0612, H W-D-0613, H W-D-0626, H W-D-0627, H W-D-0628, H W-S-0009, H W-S-0010, HW-S-0032, HW-S-0035, HW-S-0089, HW-5-0094, HW-S-0096, HW-S-0097, HW-S-0098, HW-5-0099, HW-S-0100, H W-S-0101, W W-S-0058, W W-S-0062 Shaft Wall: H W-D-0603, H W-D-0609, H W-D-0610, H W-D-0611, H W-D-0612, H W-D-0613, BW-S-0016 THROUGH -PENETRATION FlRESTOP SYSTEMS C-A.I-1020 and W-L-1064 ADVANTAGES Versatile: Easily applied on vertical and horizontal surfaces without sagging, even overhead. Sound Tested: As an integral component to maintain high STC/MTC ratings in partitions. Surface -Burning Characteristics: Classified by UL with flame spread of 0 and smoke developed of 0. For Use in Fire -Resistant, Sound and Smoke Partitions: Acceptable for use at the perimeter of most wood- and steel -stud wall assemblies. Remains Flexible: Dries tough but stays resilient to "give" with movement. High Adhesion: Bands tenaciously to a variety of surfaces. Attractive Appearance: Product is nonstaining. Easy to Dispense: Good working properties ensure fast, efficient application with hand -gun equipment. Excellent Physical Properties: Won't sag on vertical surfaces; good open time; long shelf life. Easy Cleanup: Latex -based for cleanup with soap and water before drying. UL Classified As: A material for use as a fill, void or cavity in fire-resistant joint and through - penetration firestop systems. USG SO ITS YOUR WORLD. BUILD IT LIMITATIONS 1. Not to be applied to moist areas where frost or condensation is present or in direct contact with water. 2. Protect container from freezing and extreme heat. 3. Maintain 550F (13oQ minimum temperature within the building during and after installation. 4. Product should be stored at a temperature neither below 41°F (S'C) nor exceeding 80°F (26.7°C). 5. Not to be used in applications where the surrounding materials (partitions, floors, penetrations, etc.) will exceed sustained temperatures of 125'F. 6. Consult with manufacturer of adjoining materials for compatibility. 7. Not for use with CPVC or PVC products. 8. Not intended to be painted. Sealant will shrink during curing process. 9. Do not apply USG Sheetrock' Brand Acoustical Sealant in areas where abuse or abrasion of a sealant is likely. 10. There may be discoloration of sealant when in contact with certain types of metal such as copper. 11. In through -wall penetrations where pipe is placed within a protective sleeve and USG Sheetrock'° Brand Acoustical Sealant is applied in the annular space between the pipe and the sleeve, the sleeve must be vented to allow proper curing of the USG Sheetrock° Brand Acoustical Sealant. DIRECTIONS Before handling, read Safety Data Sheet and product label for safe usage and health information. PREPARATION Installation of USG Sheetrock" Brand Acoustical Sealant should not begin until building is enclosed and building temperatures are maintained at 55'F (13'C) minimum. Provide adequate ventilation to carry off excess moisture to insure adequate drying. The performance and adhesion of sealants will be only as good as the surface of which it is applied. Surfaces of the opening and any penetration items to be caulked must be sound, clean, dry and free of dust, debris and moisture to insure proper adhesion. APPLICATION USG Sheetrock* Brand Acoustical Sealant shall be applied in accordance with ASTM C919 using conventional caulking equipment. In joint and firestop systems, apply the USG Sheetrock^ Brand Acoustical Sealant to minimum thickness specified in the individual fire -rated system. In shaftwall applications, the maximum separation between bottom of floor and top of liner panel is V. Maximum separation between bottom of floor and top of gypsum board sheets at time of installation of joint system is 5/8". The joint system is designed to accommodate a maximum 25percent compression or extension from its installed width on the finished side of the wall. For all other joints, the sealant application should be specified by a design professional who should give consideration to using a backer rod or bond tape where the gap exceeds 5/8". For through -wall penetration designs where piping is installed either concentrically or eccentrically within a cylindrical sleeve application, the design professional shall specify a spacer, packing material, or backer rod that is compatible / non -reactive with both cylindrical outer sleeve and pipe material. The space, packing material, and backer rod shall also serve the function of preventing pipe from contact with the outer sleeve. In joints too shallow to take a backer rod, use a bond breaker tape to prevent three -sided adhesion. In acoustical applications, apply 1/4" min. bead of sealant to seal perimeter of partition. Apply continuous bead of USG Sheetrock° Brand Acoustical Sealant around all openings and partition intersections. In penetration applications that are not covered in an individual fire -rated system, the thickness of the sealant applied within the opening should be no less than 1/4" and no greater than 5/8" flush with the top surface of the floor or sides of the wall. Do Don't Do Steel USG Sheetrock- Brand Acoustical Sealant Brand Acoustical Sealant Q _ Electrical outlets - PRODUCT DATA Testing and Classification: Meets ASTM C834 Standard Specification for Latex -Based Sealing _ I Compounds tested in accordance with ASTM C731, ASTM C732, ASTM C733, ASTM C734, ASTM C736, ASTM D217, ASTM D2202, ASTM D2203 and ASTM D2377. Also tested in accordance with ASTM E84 (surface -burning characteristics), ASTM E90 (sound tests) and ASTM E1966 -- (fire-resistant joint systems). ASTM E814 (through -penetration firestop systems). -- Surface -Burning Characteristics: 0/0 (flame spread/smoke developed) - Color: Off-white _ Solids: 73 %± 3% Weight: 12.0-12.8 lbs./gal. (in container) PH: 8.5-9.5 VOC: 15 g/L Shelf Life: One year (in original, unopened container) under good storage practices. Nate: See 94 under Limitations. Coverage (approximate): 85 linear ft. of 1/4" bead/29 oz. ctdg.; 37 linear ft. of 3/8" bead/29 oz. ctdg.; 22 linear ft. of 1/2" bead/29 oz. ctdg.; 11 linear ft. of 5/8" bead/29 oz. ctdg; 392 ft. of 1/4" bead/gal.; 174 ft. of 3/8" bead/gal.; 98 ft. of 1/2" bead/gal. Packaging: 29 oz. (850 ml) cartridge; 5 gal. (18.9 L) pail. GOOD DESIGN PRACTICES 1. INSPECTIONS Periodic inspection of all sealant applications including rated barriers is recommended to make _ sure that any new openings, modifications of previously installed seals, or areas exhibiting physical i damage have been properly sealed or repaired. 2.SOUNDTESTS Sound tests are conducted under laboratory conditions per ASTM procedures. Comparable field performance depends upon careful attention to details and workmanship. USG Sheetrock^ Brand Acoustical Sealant should be used to seal all assemblies used for sound control and all assembly cutouts, such as those for electrical boxes. Back-to-back penetrations of the diaphragm, flanking paths, door and borrowed -light openings should be avoided. WARNING Avoid exmsure to fume& Inhalation of vapor may cause 3. N ETAL O O OR AND BORROWED-LI GHT FRAMES headache, nausea or irrRaUon of nose. throe, and lungs Use In awell-venblared area. wear a NIOSH/MSHA- Apply a continuous bead ofUSG Sheetrock'' Brand Acoustical Sealant inside door frame throat just approved respirator in poorly ventilated areas Avoid before inserting facing panel into frame. Do not terminate gypsum panel against trim return. contact with eyes and skirt Wear safety glasses or gaggles la eye proReem- it"orAntact oCGLrs,immediately nuih thoroughlyw,M water forlsminute& Irimuuan persists. consult physldan. ProlmlgQtl or repealed Contact with skin - can cause irritanon. WexrwMemraaf glovezand protective 4. ADDITIONAL INFORMATION workdothmgforekkspmmoampskmcmtactoccurs. See publications in USG Architectural Reference Library; (SAlOO), Construction Selector, (SA927), wash thoroughly shut soap and water.lf britation Perseus. canzmtpMOmmoomtmge.clfmgeud.wnwta Gypsum Panels and Accessories(for information on system components);(SA727), USG Fire Stop Phydclan immediatey. Systems; (SA926), USG Shaft Wall Systems Catalog; and usgdesignstudio.com/sealant-fire-tests.asp. Productsalely information: 800 507-8899. I[EEP OUT OF REAQI OF CHILDREN. %a trail TRADEMARKS the mad USG• YOUR WORLD. SUBMITTAL APPROVALS dOCI4IT'S - .fire u Ingo. me lements and s. -------- --------- —---, andBUIrelied mUSG rehadeearks USG and related marks are M1atlemarkzWUSG Corporation in in lab Name itzaMliates INTERNATIONAL FIRESTOP COUNCIL and THE SOURCE OF CarNactor Date _ FIRESTOPE PERTISEaroregistesedbademaks.M.sed -- NOTE Products desvibed here may not be available in all geographic markets. Consult your USG Co.,, sales - office or representative for information. NOTICE We shall not be liable ror incidental and conmmential - damagm,directly or indirectly sustained. her for am loss .used by app8cafian of Unse grind snot in accordance with ¢anent printed insbucpms or far other Wan Me Mlended pit. Our Ba idly is expressly limited Io replacement of defective good& Any Gain shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been disowered. BCC USGAYOU SAFETYFIRSTI ECC(874-4968) Follow good safety and industrial hygiene practices during usgcom handling and Installation of a8 products and systems. Take wear Precauentasnwear te 15 by JETQAev.GC 40 Walecary andReaaproety motocary equipment Data Re ad Safely Data Sheets Sheet dStates United Unitedctured Gypsum Company J57SAV.6-Ccmaralicn and/or ��� and related literature on products before specification 550 West Adams Street its affiliate& All rights reserved. and/or Installation. Chlcagc. IL 6C661 Printed USA, IT'S YOUR WORLD. GUILD IT. nIM Pursuit Boats Plant Expansion Firestop Penetration Submittal Details March 15, 2020 s ,V;Z 16OFF U`�SS IF/p c®us Classified by Underwriters Laboratories, Inc. to UL 1479 and CANIULG5115 System No. W-L-1054 U4-11 ANSI/UL1479 (ASTM E814) CAN/ULC S115 F Ratings —1 and 2 Hr (See Items 1 and 3) F Ratings —1 and 2 Hr (See Items 1 and 3) T Rating — 0 Hr FT Rating — 0 Hr L Rating at Ambient — Less Than 1 CFM/sq ft FH Ratings —1 and 2 Hr (See Items 1 and 3) L Rating at 400 F — Less Than 1 CFM/sq ft FTH Rating — 0 Hr L Rating at Ambient— Less Than 1 CFM/sq ft L Rating at 400 F — Less Than 1 CFM/sq ft 1. Wall Assembly — The 1 or 2 hr fire -rated gypsum wallboard/stud wall assembly shall be constructed of the materials and in the manner specified in the individual U300 or U400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construction features: A. Studs — Wall framing may consist of either wood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced 16 in. (406 mm) OC. Steel studs to be min 2-1/2 in. (64 mm) wide and spaced max 24 in. (610 mm) OC. When steel studs are used and the diam of opening exceeds the width of stud cavity, the opening shall be framed on all sides using lengths of steel stud installed between the vertical studs and screw -attached to the steel studs at each end. The framed opening in the wall shall be 4 to 6 in. (102 to 152 mm) wider and 4 to 6 in. (102 to 152 mm) higher than the diam of the penetrating item such that, when the penetrating item is installed in the opening, a 2 to 3 in. (51 to 76 mm) clearance is present between the penetrating item and the framing on all four sides. B. Gypsum Board' — 518 in. (16 mm) thick, 4 ft (122 cm) wide with square or tapered edges. The gypsum board type, thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual U300 or U400 Series Design in the UL Fire Resistance Directory. Max diam of opening is 32-1/4 in. (819 mm) for steel stud walls. Max diam of opening is 14-1/2 in. (368 mm) for wood stud walls. The F and FH Ratings of the firestop system are equal to the fire rating of the wall assembly. Nr 0 J Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. October 14, 2015 Hilti Firestop Systems Page: 1 of System No. W-L-1054 0 J 2. Through -Penetrants — One metallic pipe, conduit or tubing to be installed either concentrically or eccentrically within the firestop system. The annular space shall be min 0 in. to max 2-114 in. (57 mm). Pipe may be installed with continuous point contact. Pipe, conduit or tubing to be rigidly supported on both sides of wall assembly. The followingtypes_.and sizes of metallicpipes, conduits or tubing may be used: P Steel.P-ipe=—Nom.3bin-(762-mm)diam(orsmaller)"Schedule'10'(orheavier)"stee pipe. ipe. D Copper Tubing.- Nom 6:in: (152mm diam{or smaller)Type;L.(orheavier) copper_tubing. E. Copper Pipe — Nom 6 in. (152 mm) diam (or smaller) regular (or heavier) copper pipe. 3. Fill, Void or Cavity Material' — Sealant— Min 518 in. (16 mm) thickness of fill material applied within the annulus, flush with both surfaces of wall. At the point or continuous contact locations between pipe and wall, a min 112 in. (13 mm) diam bead of fill material shall be applied at the pipe wall interface on both surfaces of wall. HIL,hGONSTRUGTIOWCHEMIGALS=DIV-OFHIL-T+INC = FS-One.Sealan orFS--ONE MAXjIntumescenfSealant Indicates such products shall bear the UL or cUL Certification Mark forjurisdictions employing the UL or cUL Certification (such as Canada), respectively. Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. 2015 Hilti Firestop Systems October 14, Page: 2 of 2 2005 FIRE RESISTANCE DIRECTORY STAG Pipe 64A5E- tns in the conshrr ads or ste lumber. and and fastm? .'!sign. Max n of open- :. the '� s installed, ,g to be ,e, conduit a !. contact) to on both etallic pipes, 5 (or aaile icon emllic tub- i 1 in. diam L (or (or heavier). :kness of fill es of wall. tact location wall. lant and THROUGWPENETRATION FIRESTOP SYSTEMS I System No. W-L-1063 F Rating — 2 Hr T Rating — 0 Hr SECTION A —A 4, Wall Assembly— The fie rated g)psumwallboard/stud wall assem- bly sba0 be constructed of the materials and in themanner specified in the individual U300 or U400 Series Wall and Partition Designs in the ULFire Resistance Directory and shall Include the following ohStluc- han features: A. $tads — Wall framing may consist of either wood surds or steel channei.studs. Wood studs to consist of nom 2 by 4 in. lumber sparest 16 in. OC. Steel studs to be rum 2-1 [2 in. snide and spaced max 24 in. OC. B; G Board` — Two layers of nom 112 to. thick gypsum wa board, as slecifed in the individual Wall and Partition Design. Max dam of opening is 5-7/8 in. 2. Through Penetrants—' One metalle pipe, conduit or tube to be installed within Opening. The annular space shall be min 1/4 in. to max 1-5/8 in, Pipe,. conduit or tube to be ngldly supported on both sides of wall assembly. The. following types and si[xd m metallic pipes, conduit a tubing may be used: A. Sift[ Pipe — Nom 3-1/2 in. diam(or smaller) Schedule 10 (or heavier), steel pipe. -' B. Conduit— Mom 3-1/2 in, diam (or smaller) electrical metallic tubing (MM or steel conduit. C. Copper Tubing.— Nom; in. diam (or smaller) Type M'(or heavier) copper tubing. 3: RIi, Void or Cavity 6taterial'— Min I In. thickness of fill material applied within the annulus, flush with both surfaces of wall. Dry mix material mixed with water at a rate of 2.1 pasts drymix. to 1 �rt water, by weight, in accordance with the accompanying ireta Cation instructions. UNITED STATES GYPSUM CO —Type EC 3A. FBI, Void or Cavity Material•— Not Shown —Two component fill _ material used as an alternate to hem 3. Min 1 in, thickness of fill mate- rial applied within the annulus, Bush with both surfaces of wall. Ready -mixed cornponent mixed with accelerator component at a rate of 66 pints of ready -mixed component to 1 part of accelerator component by weight in accordance with the ac ampanyhrg installation instruc- tions. UNITED STATES GYPSUM CO -Type RFC 'Bearing the UL Classification Marking System No. W-L-1064 F Rating — 2 Hr T Rating — 0 Hr SECTION A —A I. Wall Assembly— The fire rated gypsum wallboard/stud wall as. em- bly shall be constructed of the materials and in the manner specified in the individual U300 or U400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construc- tion features: A. Studs— Wall framing may consist of either wood studs or steel Ui 'i THROUGH -PENETRATION FIRESTOP SYSTEMS (XHEZ) 3319 channel studs: Wood studs to consist of non, 2 by 4 in. lumber spaced 16 in. OC. Steel studs to be min 2-1/2 in. wide and spaced max 24 m. OC. B. Gypsum Board'— Two Lavers of nom 1/2 in. thick gypwm wallboard, as specified in tale individual Wall and Partition Design. Max diem of Opel tirtg js 6 in. Z Pipe or Condufl — One nom 4 m. dram Schedule Id (or heavier) steel It steel conduit or electrical metallic tube (EMT) to be centered within opening. The annular space stall be min 1 /4 at. to max 1-1 /4 in. Pipe or conduit to be rigidly supported on both sides of wall assem- bh: 3. Forming Material•— Min 2-1/2 in. thickness of min 4.0 pd mineral wool forming material firmly packed into annular space and stud cav- ity m area of tvail opening as a permanent form. Forming material to be recessed min 1 in. from Loth surfaces of wall to accommodatethe caulk fill material. THERMAFTBER INC Type SAF 4. Fill, void or Cavity Material-- Caulk — Mtn 1 in. thickness of fill material lied within dieanns, flus h with both surfaces of wall. UNI ED STATES GYPSUM CO, SUB OF USG CORP —Type AS USG INTERIORS INC—Type SS 'Bearing the UL CLvssification.Marking _71e n W-L1065 F citing — 2,Hr T Rating 1 orYHrdSeeItem 1B) A 4(� I A) I Jr�. 0000000 I LA SECTION A —A Wall Assembly— Tive. ire rated gypsum wallbuanl/stud wall assem- bly shall be constructed of the materials and in the maimer specified in the individual U3W or U400 Series Wall and Partition Designs in the UL Fin! Resistance Di�and shall include the following construc- tion features: A. Studs — Will framing may consist of either syood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. lumber spaced 16 in, OC. Steel studs to be ruin 2-1/2 in. wide and spaca max 24' OC B. Gypsum Hoard" — Two -foyers of nom 4 it wide by 112 in. thick gypsum wallboard, as specified in the individual Will and Parti- fion.Design- htax area of opentttgg is 60 sq in.. Fur 2 Hr T Rating, Op may be oriented vertically or horizontally. When ori- enhwi vertically; max width dimension is 20 in- and max hcighl dimension is 3 in. For t Ifr T Ratiliz max width dimension is 7 2. 1 ipeo7r Vonduit— Multiple nom 1 in. diam (or smaller) Schedule Ill (or heavier) steel pipes, steel conduits or steel electrical metallic tubing (EM11 to be installed within opening. A clearance of 31/8 in. to 1-518 in. shall be maintained between pipes, conduits and/or tubes Annular space between pipes, conduits and tubes and edge of opening to he nun 3/8 it,. to max 1-0/8 in. Pipes, conduits and tube's to be rigidly supported on both sides of wall assembly. 3. Forming Material` — Mineral wool foriiting material firmly packed into surd cavity in area of opening as a permanent form. Nnntng material. to be recessed I in. front both surfaces of Wall to accommodate the rryaired thickness of fill material. tiTHERMz1ElYER;(NEB_=1'i+f+e n I 4. Fill, oud oz avrty r atena +Min 1 in. thickness of fill arterial cepPh J to fill opening Bush with both surfaces of wall. Dry mu male. nal mixed with water at a rate of 2.1 parts dry mu to 1 part water, by weight, in accordance with the pramrpanvuhg vutallatnn imtmctinns. UNITED STATES GYPSUM CO -Type FC. 4A. Fill, Vuid "Cavity Material'— Not Shown —Two component fill material used as an alternate to It= 4. MLn 1 to thickness of fill mate- rial applied within the annulus, Bush with both surfaces of wall. Ready mixed component mixed with accelerator component at a rate of 66 parts of ready -!nixed component to 1 part at accelerator component by weight in accordance with the accompanying installation Justine- tions. UNITED STATES GYPSUM CO —Type RFC LOOK FOR THE UL MARK ON PRODUCT Srj�Z IPiP� - GE/LMMO GS [ENGINEERINV( JUDGMENT-FIRESTOP'DETX[L GQ FG,�z502 PROJECT: PURSUIT BOATS PLANT EXPANSION UL L 52* CONTRACTOR: RICHARD K. DAVIS CONSTRUCTION C&f. (F-RATING'="1 HRJ CROSS -SECTIONAL VIEW 3 1 4 6 l l ll 1 ll l ll l ll l ll l 2 5 1. WOOD FLOORICEILING ASSEMBLY (UL NO.524 SERIES) (1-HR. FIRE -RATING). 2.OPENING TO BE FRAMED OUT WITH JOIST MATERIAL. 31IJE-OR.MORE_MAXI MlIM.2" MOMINAL.DIAMETERSTEICCONDUIT-OR'EMTj. 4. MINIMUM 4" THICKNESS MINERAL WOOL (MIN. 4 PCF DENSITY) TIGHTLY PACKED AND RECESSED TO ACCOMMODATE SEALANT. 5. MINIMUM 4" THICKNESS MINERAL WOOL (MIN. 4 PCF DENSITY) TIGHTLY PACKED, FLUSH WITH BOTTOM SIDE OF ASSEMBLY. 6. MINIMUM 3/4" DEPTH HILTI FS-ONE MAX INTUMESCENT FIRESTOP SEALANT. NOTESCQMAXIMy AM REA OF OPENING 446`SQ 'W 2. ANNULAR SPACE = MINIMUM 0", MAXIMUM 12". 3. [NOT SHOWN] WHEN ANNULAR SPACE IS 0", APPLY MINIMUM 1/2" BEAD HILTI FS-ONE MAX INTUMESCENT FIRESTOP SEALANT AT POINT OF CONTACT. THIS ENGINEERING JUDGMENT REPRESENTS A FIRESTOP SYSTEM THAT WOULD BE EXPECTED TO PASS THE STATED RATINGS IF TESTED. (REFERENCE-IL/c'U1_ SYSTEM•N0. C-AJ=8143-&-F--C.8066- HILTI, Inc. Sheet 7 of 1 Drawing No. Plano, Texas USA (800) 879-8000 scale 114x_' 1. 354680a Designed by Hilti Firestop Systems 0 Date Dec.30,2019 Saving Lives through Innovation and Education MULTIPLE PENETRA' F-RATING = 2-HR. T-RATING = 0-HR. TOP VIEW T StG 1 IUN A -A T FLOORMALL OR BLOCK WALL Sheet f of 3 Drawing No. MLE HILTI,Inc. Scale 3132"=1" CAJ Tulsa, Oklahoma USA (800) 879-8000 HIM Firestop Systems Date Jan. 06, 2015 8143c Saving Lives through Innovation and Education ULIcUL SYSTEM NO. C-AJ-8143 MULTIPLE PENETRATIONS THROUGH CONCRETE FLOORMALL OR BLOCK WALL F-RATING = 2-HR. T-RATING = 0-HR. 1. CONCRETE FLOOR OR WALL ASSEMBLY (2-HR. FIRE -RATING) : A. LIGHTWEIGHT OR NORMAL WEIGHT CONCRETE FLOOR (MINIMUM 4.1/2" THICK). B. LIGHTWEIGHT OR NORMAL WEIGHT CONCRETE WALL (MINIMUM 5" THICK). C. ANY ULIcUL CLASSIFIED CONCRETE BLOCK WALL. 2. ONE OR MORE OF THE FOLLOWING PENETRATING ITEMS (ITEMS 2.7) AND IN ANY COMBINATION MAY BE INSTALLED WITHIN THE OPENING: A. MAXIMUM 24" NOMINAL DIAMETER STEEL PIPE (SCHEDULE 40 OR HEAVIER). B. MAXIMUM 24" NOMINAL DIAMETER CAST OR DUCTILE IRON PIPE. C. MAXIMUM 6" NOMINAL DIAMETER COPPER PIPE. D. MAXIMUM 6" NOMINAL DIAMETER STEEL CONDUIT. E. MAXIMUM 4" NOMINAL DIAMETER EMT. 3. [OPTIONAL] ANY OR ALL PIPES (8" OR SMALLER) MAY BE INSULATED WITH MAXIMUM 1-1/2" THICK GLASS -FIBER PIPE INSULATION. 4. [OPTIONAL] ANY OR ALL PIPES (2" OR SMALLER) MAY BE INSULATED WITH MAXIMUM 2" THICK GLASS -FIBER PIPE INSULATION OR MAXIMUM 1" THICK ABIPVC PIPE INSULATION. 5. MAXIMUM 4" NOMINAL DIAMETER CABLE BUNDLE OR INDIVIDUAL CABLE TO CONSIST OF ANY OF THE FOLLOWING: A. MAXIMUM 500 KCMIL SINGLE'COPPER OR ALUMINUM CONDUCTOR POWER CABLE WITH PVC JACKET. B. MAXIMUM 300 PAIR NO. 24 AWG TELEPHONE CABLE WITH PVC JACKET. C. MAXIMUM 71C NO.12 AWG POWER CABLE WITH PVC JACKET. D. MAXIMUM 112" DIAMETER FIBER OPTIC CABLE WITH PVC JACKET. E. MAXIMUM 31C NO.12 AWG STEEL CLAD CABLE. 6. MAXIMUM 31C NO.210 AWG COPPER CONDUCTOR PVC JACKETED ALUMINUM OR STEEL CLAD, TECK 90 CABLE. 7. MAXIMUM 4/C NO.750 KCMIL ALUMINUM OR COPPER CONDUCTOR WITH ALUMINUM OR STEEL CLAD, WITH OR WITHOUT PVC JACKET. 8. MAXIMUM 24" x 6" ALUMINUM OR STEEL OPEN LADDER CABLE TRAY (MAX. QTY. =1). ANY COMBINATION OF THE TYPES AND SIZE OF CABLES DESCRIBED IN ITEM NO.5 ABOVE MAY BE USED. CABLES TO FILL MAXIMUM 40% CROSS -SECTIONAL AREA OF TRAY AND HAVE A MAXIMUM 3" CABLE LOADING DEPTH. Sheaf 2 of 3 Drawing No, HILTI, Inc. Scale CAJ Tulsa, Oklahoma USA (800) 879-8000 Hilti Firestop Systems Date Jan.06,2015 8143c Saving Lives through Innovation and Education UL/cUL SYSTEM NO. C-AJ-8143 MULTIPLE PENETRATIONS THROUGH CONCRETE FLOORMALL OR BLOCK WALL F-RATING = 2-HR. T-RATING = 0-HR. 0 a m a U ANNULAR SPACE MINIMUM MAXIMUM BETWEEN INDIVIDUAL CABLES AND CABLE BUNDLES 112" 12" BETWEEN INDIVIDUALIBUNDLES CABLES AND OTHER PENETRANTS 1/2" 12" -EXCEPTION: BETWEEN INDIVIDUALIBUNDLED CABLES AND COPPER PIPES GREATER THAN 3", STEEL PIPE, IRON PIPE, AND CONDUITS GREATER THAN 4" 2" 12" BETWEEN INSULATED PIPES 2" 12" BETWEEN METALLIC PIPES 2" 12" - EXCEPTION 1)) BETWEEN 3_3_" AND SMALLER COPPER PIPES 1/2" 12" EXGEPTION'2)tiBETWEEW2`ANVSMALLER'STEELPIPESANDCONDUITS- -- —0,`_ 12' -EXCEPTION 3) BETWEEN 4" AND SMALLER STEEL PIPES AND CONDUITS 112" 12" BETWEEN INSULATED PIPES OR CABLE TRAY AND PERIPHERY OF OPENING 1/2" 12" BETWEEN ALL OTHER PENETRANTS AND PERIPHERY OF OPENING 0" 12" BETWEEN CABLE TRAY AND ALL OTHER PENETRANTS 3" 12" _1�1 NN NOTES :1. MAXIMUM DIAMETER OF OPENING='48" x 30". ) INIMUM IT2; DEP.,TH.HILThF ..0NE.MAX'OR�FS-ONE INTUMESCENT; FIRES,T�Op— IZANT-IS"ItDESf A�WALLASSEMBLY. Sheet 3 cf 3 Drawing No. HILTI, Inc. Scale CAJ Tulsa, Oklahoma USA (800) 879-6000 Hilt! Firestop Systems Date Jan.06,2015 8143c Saving Lives through PING P1 Pr-- - Wk�- a �� Fa System No. W-L-2244 N m N F Ratings --1 and 2 Hr (See Item 1) � classified by T Ratings —1 and 2 Hr (See Item 1) undemnters Labora[odes, Inc. L Rating at Ambient - Less Than 1 CFMIsq ft to UL 1479 L Rating at 400 F • 2 CFMIsq It SECTION A -A 1. Wall Assembly —The 1 and 2 hr fire rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner described in the individual U300, U400, V400 or W400 Series Wall and Partition Design in the UL Fire Resistance Directory and shall include the following construction features: A. Studs — Wall framing shall consist of either woad studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced 16 in. (406 mm) OC. Steel studs to be min 2-1/2 in. (64 mm) wide by 1-318 in. (35 mm) deep channels spaced max 24 in. (610 mm) OC. B. Gypsum Board' — The gypsum board type, thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual Wall and Partition Series Design in the UL Fire Resistance Directory. Max diam of opening is 3 in. (76 mm). The hourly F and T Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed. 2. Through Penetrant— One nonmetallic pipe, conduit or tubing installed either concentrically or eccentrically within the firestop system. The annular space between pipe and periphery of opening shall be min of 0 in. (point contact) to a max 518 in. .(16 mm). Pipe to be rigidly supported on both sides of wall assembly. The following ty as and sizes of nonmetallic i es ma be used: Pajyv ryfGfi on VCJNbm m. (517m 'd or smarter cell lar or olid core-Schedule-40P(or heavier) pipe for use in closed (process or supply) piping systems. B. Chlorinated Polyvinyl Chloride (CPVC) — Nam 2 in. (51 mm) diam (or smaller) SDR 13.5 CPVC pipe for use in closed (process or supply) piping systems. 3. Fill, Void or Cavity Material' - Sealant — Min 5/8 in. (16 mm) thickness of fill material applied within annulus, flush with both surfaces of wall. At point contact location, a min 1/2 in. (13 mm) diam bead of fill material shall be applied to the wall/penetrant interface an both surfaces of the wall. 73T�CONSTBUIeTI©N,CHEMICALS„ DI.V_OF.HILTI.INC�—=-�FS-_ONE Sealant_or S=ONE:MAX--huomes�e LQgelagt duct Indicates such products shall bear the tJL or cOCCertification Mark�for jur si ictions employing the UL or cUL Certification (such as Canada), respectively. Reproduced by HILT[, Inc. Courtesy of Underwriters Laboratories, Inc. Hilti Firestop Systems January 22, 2015 )NSUMTtO FI,'f- - wA►.i� F C`Wus Classried by Underwriters Labomfortes, Inc. to UL 1479 and CANIULC-S115 System No. W-L-5028 p 1l ANSIIUL1479 (ASTM E814) CANIULC S115 F Ratings —1 and 2 Hr (See Item 1) F Ratings —1 and 2 Hr (See Item 1) T Ratings — 0, 3/4 and 1 Hr (See Item 3) FT Ratings — 0,'% and 1 Hr (See Item 3) L Rating At Ambient— Less Than 1 CFM/sq It FH Ratings —1 and 2 Hr (See Item 1) L Rating At 400 F — Less Than 1 CFM/sq It FTH Ratings — 0, 3/4 and 1 Hr (See Item 3) L Rating At Ambient — Less Than 1 CFM/sq It L Rating At 400 F — Less Than 1 CFMIsq ft SECTION A -A 1. Wall Assembly— The 1 or 2 hr fire rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in the individual U300, U400, V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construction features: A. Studs — Wall framing may consist of either wood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced 16 in. (406 mm) OC. Steel studs to be min 2-1/2 in. (64 mm) wide and spaced max 24 in. (610 mm) OC. B. Gypsum Board' — 5/8 in. (16 mm) thick, 4 ft (1.22 m) wide with square or tapered edges. The gypsum board type, thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual Wall and Partition Design. Max diam of opening is 7-1/2 in. (191 mm). The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed. 2. Through Penetrants — One metallic pipe or tubing to be centered within the firestop system. Pipe or tubing to be rigidly supported on both sides of wall assembly. The following types and sizes of metallic pipes or tubing may be used: A. Steel Pipe — Nam 4 in. (102 mm) diam (or smaller) Schedule 40 (or heavier) steel pipe. B. Copper Tubing — Nam 2 in. (51 mm) diam (or smaller) Type L (or heavier) copper tubing. C. Copper Pipe — Nom 2 in. (51 mm) diam (or smaller) Regular (or heavier) copper pipe. 00 N O 4'J J Reproduced by HILT[, Inc. Courtesy of Underwriters Laboratories. Inc. 2015 Hilti Firestop Systems January 27, Page: 1 of2 System No. W-L-5028 CO cm O to J 3. Tube Insulation — Plastics+— Min 112 in. (13 mm) to max 1 in. (25 mm) thick acrylonitrile butadienelpolyvinyl chloride (AB/PVC) Flexible foam furnished in the farm of tubing. An annular space of min 0 in. (point contact) to max 1-1/2 in. (38 mm) is required within the firestop system. The T, FT and FTH Ratings are 1 hr when the 1 in. (25 mm) thick tube insulation is used and 314 hr when the 314 in. (19 mm) thick tube insulation is used. When tube insulation thickness is less than 3/4 in. (19 mm), the T, FT and FTH Ratings are 0 Hr. See Plastics+ (OMFZ2) category in the Recognized Component Directory for names of manufacturers. Any Recognized Component tube insulation material meeting the above specifications and having a UL 94 Flammability Classification of 94-5VA may be used. 4. Fill, Vcid or Cavity Material' — Sealant— Min 518 in. (16 mm) thickness of fill material applied within the annulus, Flush with both surfaces of wall. At the paint contact location between pipe covering and gypsum board, a min 112 in. it mm) diam bead of fill material shall be applied at the pipe covering/gypsum board interface on both surfaces of wall. HILTI:CCNST,-RUCTION:CHEMICALS-DIV-OF-'HILTIINC FS=ONE. Sealant or.FS:ONE-MAX'.Intum'escert:Sealant *Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada), respectively. Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. 2015 Hilti Firestop Systems January 27, Page:2of2 INS WO VIPE - wAw U�SS lFi�O Cus Classified by Underwriters Laboratodes, Inc. to UL 1479 and CAN/ULGS115 System No. W-L-5096 U# 11 ANSI/UL1479 (ASTM E814) CAN/ULC S115 F Ratings -1 and 2 Hr (See Item 1) F Ratings -1 and 2 Hr (See Item 1) T Ratings - 0, 112 and 1 (See Items 3 and 4) FT Ratings - 0, 1/2 and 1 (See Items 3 and 4) FH Ratings -1 and 2 Hr (See Item 1) FTH Ratings - 0, 1/2 and 1 (See Items 3 and 4) SECTION A -A 1. Wall Assembly —The 1 or 2 hr fire rated wallboardlstud wall assembly shall be constructed of the materials and in the manner specified in the individual U300, U400, V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construction features: A. Studs — Wall framing shall consist of either woad studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced 16 in. (406 mm) OC. Steel studs to be min 2-1/2 in. (64 mm) vide and spaced max 24 in. (610 mm) OC. B. Gypsum Board'— Nom 5/8 in. (16 mm) thick, 4 ft (1.2 m) wide with square or tapered edges. The gypsum board Type, thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual U300, U400, V400 or W400 Series Design in the Fire Resistance Directory. Max diam of openings is 14-112 in. (368 mm) for wood stud walls. Max diam of opening is 18-5/8 in. (473 mm) for steel studs walls or sized to the outside diam of steel sleeve (Item 2) when optional steel sleeve is used. The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed. 2. Steel Sleeve — (Optional) Max 18 in. (457 mm) diam Schedule 40 (or heavier) steel pipe sleeve inserted in opening core drilled through wall. Length of steel sleeve to be equal to thickness of wall. CID C" 0 u� J Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. March 30, 2015 Hilti Firestop Systems Paoe: 1 of2 System No. W-L-5096 3. Through Penetrant— One metallic pipe or tubing installed concentrically ore ccentricallywithin the firestop system. Pipe or tube to be rigidly supported on both sides of wall assembly. The following types and sizes of metallic pipes or tube may be used: A. Steel Pipe — Nom 12 in. (305 mm) diam (or smaller) Schedule 40 (or heavier) steel pipe. When steel pipe is used, T, FT and FTH Ratings are 1/2 hr and 1 hr when installed in 1 and 2 hr rated walls, respectively. B. Copper Tube — Nom 6 in. (152 mm) diam (or smaller) Type L (or heavier) copper tube. When copper tube is used, T, FT and FTH Ratings are 1/2 hr and 1 hr when installed in 1 and 2 hr rated walls, respectively. C. Copper Pipe — Nom 6 in. (152 mm) diam (or smaller) Regular (or heavier) copper pipe. When copper pipe is used, T, FT and FTH Ratings are 1/2 and 1 hr when installed in 1 and 2 hr rated walls respectively. 4. Pipe Covering' — Max. 2 in. (51 mm) thick hollow cylindrical heavy density (nom 3.5 pcf or 56 kglm') glass fiber units, jacketed on the outside with an all service jacket. Longitudinal joints sealed with metal fasteners or factory -applied SSL tape. Transverse joints secured with metal fasteners or with butt tape supplied with the product. The annular space between insulated penetrant and periphery of opening shall be min 0 in. (point contact) to max 1-7/8 in. (48 mm). When pipe covering thickness is less than 2 in. (51 mm), T, FT and FTH Ratings are 0 hr. See Pipe and Equipment Covering -Materials (BRGU) category in the Building Materials Directory for names of manufacturers. Any pipe covering material meeting the above specifications and bearing the UL Classification Marking with a Flame Spread Index of 25 or less and a Smoke Developed Index of 50 or less may be used. 5. Fill, Void or Cavity Material' -Sealant— Min 518 in. (16 mm) or thickness of fill material applied within annulus, Flush with both surfaces of wall assembly for At point contact an additional 112 in. (13 mm)bead of sealant shall be applied to the insulated pipe/ wall interface. HIL-TLCONSTRUGTION:CHEMICALS,:DIV=OF'H ILTIINC — FS-0NE:Sealant%or'FS=ONE,-MAX. lntumesderit-Sealant Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada), respectively. 1110111111111 Hilti Firestop Systems Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. March 30, 2015 2of2 C ! US Classified 6y underwriters Laboratones, Inc. to UL 1479 and CANULC-5115 System NoJN;LQ0:30j ANSIIUL1479(ASTM E814) CANIULC S115 F Rating K1 °and 2`Nr (Beadle n1) _� F Rating —1 and 2 Hr (See Item 1) T Rating —1 and 2 Hr (See Item 1) FT Rating —1 and 2 Hr (See Item 1) FH Rating —1 and 2 Hr (See Item 1) FTH Rating —1 and 2 Hr (See Item 1) O CM O O J 1. Wall Assembly — The 1 or 2 hr fire -rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construction features: A. Studs — Wall framing may consist of either wood studs or channel shaped steel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced max 16 in. (406 mm) OC. Steel studs to be min 3-1/2 in. (89 mm) wide and spaced max 24 in. (610 mm) OC. B. Gypsum Board' — 518 in. (16 mm) thick with square or tapered edges. The gypsum board type, thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual U300, U400 or V400 Wall and Partition Design. If the system is installed in a wood stud/gypsum board assembly, the max area of square, rectangular, or circular opening is 210 sq in. (1355 cm2). with max dimension of 14-1/2 in. (368 mm). If the system is installed in a steel stud/gypsum board assembly�Max-ari f of:sW6r- rectangular:di`ci[cular-openmg•is(`240 s tri.' (1548 cm2) withhmmakdimension ofr20'inR(508:mm7wde? The hourly F, FH and T, FT and FTH Rating of the Firestop system is equal to the hourly fire rating of the wall assembly in which it is installed. 2. Firestop System — The firestop system shall consist of the following: A. Packing Material — In 2 hr fire rated wall assemblies, min 4-3/4 in. (121 mm) thickness of min 4 pcf (64 kg/m3) mineral wool bait insulation firmly packed into opening as a permanent form. In 1 hr fire rated wall assemblies, min 3-1/2 in. (89 mm) thickness of min 4 pcf (64 kg/m3) mineral wool batt insulation firmly packed into opening as a permanent form. Packing material recessed from both surfaces of the wall to accommodate the required thickness of fill material. Al. Packing Material — Min 1-1/4 in. (32 mm) thickness of min 4 pcf (64 kg/m3) mineral wool batt insulation firmly packed as a backer around the perimeter of opening as a permanent form. B. Fill, Void or Cavity Material` — Sealant — Min 518 in. (16 mm) thickness of fill material applied within opening, flush with both surfaces of wall. HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC— FS-ONE Sealant or FS-ONE MAX Intumescent Sealant Indicates such products shall bear the UL or cUL Certification Mark forjurisdictions employing the UL or cUL Certification (such as Canada), respectively. Hilti Firestop Systems Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. January 23, 2015 Metallic and Non-metallic Outlet Boxes Used. in Fire -rated Assembly Y How do I know if an out- inches. In addition, the entire sur- let box can be used in a face area of the boxes must not ex - fire -rated assembly? Metallic Outlet Boxes are Listed under the category Metallic Outlet Boxes (QCIT), in the UL Electrical Con- struction Equipment Directory. The Guide Information for QCIT speci- fies the installation requirements for use in fire -rated assem- blies. Information about UL-Listed me- tallic outlet boxes, in- cluding the Guide In- formation, can also be found by accessing UL's online product certification database at wwwul.com. Metallic outlet boxes for use in fire - rated wall assemblies include single and double gang metallic outlet and switch boxes equipped with Listed metallic or nonmetallic cover plates. These outlet boxes are intended for installation in bearing and non -load bearing wood or steel stud gypsum wallboard walls with fire resistance ratings of 2 hours or less. The metallic outlet or switch boxes must be securely fas- tened to the studs. Openings in the wallboard facing are to be cut so that the clearance between the box and wallboard does not exceed 1/8 inch. The surface area of indi- vidual metallic outlet or switch boxes must not exceed 16 square teed 100 square inches per 100 square feet of wall surface. A minimum horizontal distance of 24 inches must separate metal- lic boxes located on opposite sides of walls or partitions. This minimum horizontal spacing may be reduced through the use of UL Classified Wall Opening Protective Materials (QCSN), commonly known as "putty pads" or "insert pads." Further, metallic boxes can- not be installed on opposite sides of walls or partitions in staggered stud constructions unless putty pads or insert pads are installed with the metallic boxes in accor- dance with the Classification re- quirements for the protective ma - serials. Wall Opening Protective Materials are found under the cat- egory QCSN in the UL Electrical Construction Equipment Directory, and also under the category CLIV in Volume 1 of the UL Fire Resis- tance Directory, or online at UL's product certification database. Listed metallic outlet boxes with metallic or nonmetallic cover plates may be used in fire -rated floor/ ceiling and roof/ceil- ing assemblies with ratings not exceeding two hours. Such as- semblies must be equipped with gyp- sum wallboard ceil- ings. The metallic outlet boxes shall be securely fastened to the joists and the opening of the wall- board facing must be cut so that the clear- ance between the box and the gypsum wall- board does not ex- ceed 1/8 inch. The en- tire surface area of the boxes must not ex- ceed 100 square inches per 100 square feet of ceiling surface. Information re- garding the use of outlet boxes in fire -rated floor/ceiling and roof/ceil- ing assemblies can be found on page 4 in volume 1 of the 2000 edition of the UL Fire Resistance Directory. This information was recently published to be consis- tent with those requirements speci- fied by the International Confer- ence of Building Officials (ICBO), the Southern Building Code Con- -- IAEI NEWS ference International (SBCCI), and the Building Officials and Code Administrators (BOCA) model building codes. Non-metallic outlet boxes, which can be used in fire -rated assemblies, are Classified under the category Outlet Boxes and Fittings Classified For Fire Resistance (QBWY), in the UL Electrical Construction Equip- ment Directory, and under CEYY in Volume 1 of the UL Fire Resistance Directory. This same information can also be found by accessing UL's online product certification data- base at www.ul.com. This product category covers spe- cial purpose boxes for installation in floors, and nonmetallic outlet boxes for installation in ceilings, floor/ceiling or roof/ceiling assem- blies, and in wall and partition as- semblies in accordance with the National Electrical Code (NEC). These boxes provide the required fire resistance when installed in spe- cific fire -rated ceilings or walls de- scribed for each Classified company. These boxes have also been inves- tigated and found to comply with UL's electrical requirements. Any Listed metallic or nonmetallic cover plate is suitable for use with these nonmetallic boxes. This category includes Classifica- tions for nonmetallic outlet and posite sides of walls of partitions may be reduced through the use of Wall Opening Protective Materials. In both cases, the nonmetallic boxes shall be protected as de- scribed in the Classification require- ments for the protective materials for use on the specific box. Nonmetallic outlet boxes Clas- switch boxes for use in fire -resistive sifted for use in fire -resistive de - rated wall or partition assemblies. The information provided for each Classification includes the model numbers for the Classified prod- ucts, a description of the rated as- semblies, the spacing limitations for the boxes and the installation de- tails. Nonmetallic boxes are not to be installed on opposite sides of walls or partitions in staggered stud constructions, unless Classified for use in such constructions or unless Wall Opening Protective Materials (QCSN or CLM are installed with the nonmetallic boxes. signs will be marked on the box with the UL Classification Marking along with the hourly rating (Class 1 or 2HR); and the intended use "F" for floor, "W' for wall; "C" for ceiling; and "F/C" for floor/ceiling. Such boxes are Classified for use in specific fire -resistive designs when installed in accordance with the details described for each Clas- sified company. Always refer to the Classification requirements in the UL Electrical Construction Equip- ment Directory and Fire Resis- tance Directories, and the instal - The minimum horizontal spac- lation instructions for proper fin- ing between boxes located on op- stallation guidelines. 2cco FII`Ti i Product Information Firestop Self Leveling Silicone Sealant CFS-S SIL SL Product description N Self -leveling, single -component, silicone -based firestop sealant for use with through -penetrations as well as construction joints in floors. Product features ® Self -leveling -requires no tooling i Excellent elongation/compression properties ■ Meets 500 cycle requirements (ASTM E 1966 and UL 2079) ■ Smoke, fume, water and UV resistant ■ Meets Class I W-rating requirements ■ Meets LEED- requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Areas of application 7 Sealing construction/expansion joints • Metal pipes - • Cable bundles • Sealing multiple penetrations in small or large openings For use with ■ Concrete floors rated up to 4 hours Examples i Penetrations for metal pipes between floor levels ■ Construction joints and expansion joints in floors Installation instructions ■ Refer to what is included in the package, the MSOS, and the applicable listing. Technical Data* CFS-S SIL St. Chemical basis Neutral elastic silicone Density Approx. 1.4 g/cm' Color Gray Application temperature 40-F to 104-F (5-C to 40-C) Skin forming time Approx. 15 min Curing time Approx. 2 mm/3 days Volume shrinkage Approx. 0 -5% Joint movement capability Approx. 33% (UL 2079) Temperature resistance -40-F to 300-F (-40-C to 149-C) Surface burning characteristics Flame Spread: 0 (ASTM E 84-12) Smoke Development: 50 Sound transmission classification 53 (ASTM E 90-09) (Relates to specific construction) Tested in accordance with UL 1479 ASTM E 1966 UL 2079 ASTM E 814 ASTM E 2307 ASTM E 84 ASTM G21 -At 73cF (23cC) and 50% relative humidity nLL v010 ORL.V MATUrIL /Ss,gE FOR USE IN IHPOUGH PENETM'IION L.`yL �.AND PERIMETER nRECOWA MENT SYSTEMS FM APPROVED . vz,�»nmw�uN•.ol,, SEEULPIIRERESISTANCE DIRECTORY SBP5 unwbizdcmenm rated Hilts Firestop Saving lives through innovation L and education Hilti. Outperform. Outlast. Hilts, Inc. (U.S.) 1-800-879-8000 www.us.hilh.com • www.us.hl8i.com/firestop • en espanal 1-800-879-5000 CERTIFICATE OF COMPLIANCE Certificate Number 20131115-R13240 Report Reference R13240 Issue Date 2013-November-15 Issued to: Hilti Construction Chemicals, Div of Hilti Inc. 5400 S 122nd East Ave Tulsa, OK 74146 This is to certify that Fill, Void or Cavity Materials representative samples of Fill, Void or Cavity Materials Certified for Canada CFS-S SIL GG and CFS-S SIL SL for use in Through - Penetration Firestop and Joint Systems in the UL Fire Resistance Directory and in the Products Certified for Canada Directory. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for safety: ANSI/UL 1479, "Fire Tests of Through -Penetration Firestops," — Edition 3 — Revision Date 2012/10/19 ANSI/UL 2079, "Tests for Fire Resistance of Building Joint Systems," — Edition 4 — Revision Date 2012/12/12 CAN/ULC-S115, "Standard Method of Fire Tests of Firestop Systems." — Edition 4 — Issue Date 2011/06/01 Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Classification Mark should be considered as being covered by UL's Classification and Follow -Up Service. The UL Classification Mark includes: UL in a circle: with the word "CLASSIFIED" ® (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of UL's evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. Look for the UL Classification Mark on the product. a4m if WI�� ,M e�imn C¢rttllmtlun prW�a¢ln 11 UL LLC O Mylnlwn�¢tlpn anG tic¢UmenbEon invohing UL NVN s¢rvlrm ae plwMM an E¢M1aHd ULLLC�UL�ar any auMa�atlf meeelUL Fpsqueatlona, please cOni]ald lepl UL Custom¢I S¢IVIW gepreaendgae a1`www.Ul.wMPonIM1Ue Page 1 of 1 Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register/ Vol. 77, No. 581 Monday, March 26, 20121 Rules and Regulations Date of issue: 122112016 Revision date: 12121/2016 Supersedes: 12I212016 Version: 3.1 SECTION 4.1.IAeritification_'__.e_� Product form Mixture Name Hilti Firestop Sealant CFS-S SIL SLIGG Product code BU Chemicals Chemical structure _ ` i•��ii .... .._._a.-... .-.ice - ,._.. ,T 2., Relevant identified uses ofthe substance or mixture and uses. atitnsed againsE�... No additional information available 1 3 f)etailg of the supplier of ttie's_af eta sfietSt` _ Ji Hil6, Inc. Legacy Tower, Suite 1000 75024 Plano - USA T +1 9724035800 1-800-879-8000 toll free - F +1 91 S 254 0522 Supplier Department issuing data specification sheet Hilb, Inc. Hilti AG Legacy Tower, Suite 1000 Feldkircherstralle 100 75024 Plano - USA 9494 Schoen - Liechtenstein T +1 9724035800 T +423 234 2111 1-800-879-8000 toll free - F+1 918 254 0522 chemicals.hse(dihilti_corn 1_4_Eittergency_telephoiita Emergency number Chem -Tree Tel.: 1 800 424 9300 (USA, FIR, Virgin Islands, Canada) Tel.: 703 527 3887 (Other countries) +1 918 8723000 1-800-879-8000 toll free SECTION 2: Hazards identification _ 2.4 _C(asstation of_tfi_e s_u_bs__tan__c_e or mixture__ GHS-US classification a R Skin Sens. 1 H317 - May cause an allergic skin reaction Repr. 2 H361 - Suspected of damaging fertility or the unborn child Full text of H statements: see section 16 GHS-US labelling Hazard pictograms (GHS-US) Signal ward (GHS-US) Hazard statements (GHS-US) 1 GHS07 GH808 Warning H317 - May cause an allergic skin reaction 2111212016 US -OSHA - en 119 Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register Vol. 77. No. 58 / Monday, March 26. 2012 / Rules and Regulations H361 - Suspected of damaging fertility or the unborn child Precautionary statements (GHS-US) P261 -Avoid breathing vapours P280 - Wear protective gloves, protective clothing, eye protection P302+P352 - If on skin: Wash with plenty of water P308+P313 - If exposed or concerned: Get medical advice/attention P333+P313 - If skin irritation or rash occurs: Get medical advice/attention Other hazards not contributing to the In use the product releases 2-butancne oxime (methyl ethyl ketoxime; MEKO) (0-24h: <0.2" classification & 24ABh: <0.02%Wh) which vaporises. - In rases of prolonged exposure MEKO may damage nasal membranes. If MEKO is inhaled in large quantities over prolonged periods of time there may be irreversible damage to health: L - H351:',Suspected of causing cancer. 2:4_ Unknown acute toxicity;(GHS_US)_� Not applicable "~ SECTION 3: Composition/information on ingredients Not applicable Name Product identifier _ k GHS-0S classification Methyltris(1-methylpropylideneaminooxy)silane (CAS No) 2298454-9 2.5-5 Skin mit. 2, H315 Eye Init. 2A. H319 - Skin Sens. 1, H317 Titanium dioxide (CA No) 13463.67-7 1 - 2.5 Cam. 2. H351 octemethylcyclutetrasiloxane (CAS No) 556-67-2 0.1 -1 Flam. Lai. 3. H226 Repr. 2, H361 _ Aquatic Chronic 4, H413 Full text of H-statements: see section 16 SECTIONr measures I 4_7. Description of £* aid imeasures __ First -aid measures general IF exposed or concemed: Get medical advicedattention. First -aid measures after inhalation Remove person to fresh air and keep comfortable for breathing. Get medical advice/attenbcn if you feel unwell. First -aid measures after skin contact Wash skin with plenty of water. Take off contaminated clothing.: If skin irritation or rash occurs: Get merfiral 2dvicelattention First -aid measures after eye contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First -aid measures after ingestion Call a poison center or a doctor if you feel unwell. 4 2 Most important symptoms anand effects,,b`a_th acute and delaye_d"�'" .� -"—"' �,_�. �'—` �__,_,_] Symptomsfinjudes after skin contact May cause an allergic skin reaction. _ 4.3. Indication of a'ny immediate mr;dtcat attgnhon anC sp_ectal treatment needed .,� �__4___� Treat symptomatically. Suitable extinguishing media Waterspray. Dry powder. Foam. Carbon dioxide. aa-___._,-e...._ � .. 5_2_Specf4 (iazards arising -born the atih§tance ar mixtureq- - `- - ------- Reactivity The product is non -reactive under normal conditions of use, storage and transport US -OSHA - en 2/9 Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register Vol. 77. No. 58 / Monday, March 26, 2012 / Rules and Regulations 5.3. AdviWCqf£iefighters_-_. Protection during firefighting Self-contained breathing apparatus. Complete protective clothing. Do not attempt to take action without suitable protective equipment. 61 Personafpreputions,,protective.equtpmentand;emergencyproceduresY_____=:_,;_... r,_..,,, _ ;,,) 6.1.1. For non -emergency personnel Emergency procedures Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours. 6.1.2. For emergency responders Protective equipment Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection". fit Eirvironmental'precaufioo`s_ Avoid release to the environment 6 8 Methods and metenal for_contemmerit and cleaning up ,,__-_��_ "'-`�"� _..o...l Methods for cleaning up Mechanically recover the product- Notify authorities if product enters sewers or public waters. Other information Dispose of materials or solid residues at an authorized site. 6:A"Referencetooth'ersectio_ns��- `—" - "` Y"'�'S For further information refer to section 13. SECTIONHandling and storage Precautions for safe handling Ensure good ventilation of the work station. Wear personal protective equipment Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid contact with skin and eyes. Avoid breathing vapours. Hygiene measures Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product Always wash hands after handling the product Contaminated work clothing should not be allowed out of the workplace. 7 2. Conditions for safe storage,.mclu, any incompatibllitie3 Storage conditions Keep cool. Store in a dry place. Store locked up. Store in a well -ventilated place. Storage temperature 41 - 77 T SECTION 8: Exposure controls/personal protection 8:1'C_ oirtrol;parameters ' Methyltria(1-methylpropylideneaminooxy)silane (22984-54-9) Not applicable Titanium dioxide (13463.67-7). ACGIH ACGIH TWA(mg/m� 1mg/m3 ACGIH Remark (ACGIH) LRT irr, A3 OSHA OSHA PEL (TWA) (mg/ml 15 mg/m3 octamethylcyclotet2silo_xane (556-67-2) Not applicable an M Hilti Firestop Sealant CFS-S SIL SL/GG - Safety Data Sheet according to Federal Register 1 Vol. 77. No. 58 / Monday, March 26, 20121 Rules and Regulations 8.2. Exposurecontrols-.- - - Appropriate engineering controls Ensure good ventilation of the work station. Personal protective equipment Protective clothing. Safety glasses. Gloves. Hand protection protective gloves. EN 374. Eye protection EN 166. Safety glasses. Skin and body protection Wear suitable protective clothing. Respiratory protection In case of inadequate ventilation wear respiratory protection. Environmental exposure controls Avoid release to the environment SECTION. chemical properties -9,1'Information.onba_sic:physicalandchem_"icalpropatj —`"'-_ej„T - `•--_-"'_ "`7 Physical state Liquid Appearance Pasty. Colour red white Odour odoudess Odour threshold Not determined pH 8.5 Melting point Not applicable Freezing point No data available Boiling point No data available Flash point 412'F Relative evaporation rate (butylacetate=1) No data available Flammability (solid, gas) No data available Explosive limits No data available Explosive propertes No data available Oxidising properties No data available Vapour pressure No data available Relative density No data available Relative vapour density at 20 °C No data available Density uit g/cm' Molecular mass Not determined Solubility No data available Log Pow No data available Auto -ignition temperature No data available Decomposition temperature No data available Viscosity No data available Viscosity, kinematic No data available Viscosity, dynamic No data available 9:2Ofhezrinformation - _- -V "' 7' No additional information available SECTION1 The product is non -reactive under normal conditions of use, storage and transport. 21/12/2016 US -OSHA -en Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register I Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 10.2. Chemical'stabi(ity Stable under normal conditions. .. _._ __.__._ __.____.._.___.___-.._ _..... �._______ ________._.1 10.3. Possibili - of tiaiarclotts reactions �' ` � - - No dangerous reactions known under normal conditions of use. None under recommended storage and handling conditions (see section 7). tOS_Incompatible materials "� --" `�"- No additional information available - T����.., .__..r.-___...__-_....___�..�--. _. .10.6 Haza_rdouu 5F&ompositt njr*ucts `��-�" Under normal conditions of storage and use, hazardous decomposition products should not be produced. y SECTION• • •• 11;1.Irifgrrnation_on`_t_oxi_c`ologicaleffe`cts "- """"'""`__�A--..�_ _— e � �i,� Acute toxicity Not classified Methyltris(1-methylpmpylideneaminooxy)silane (2298454-9) LD50 oral rat 2250 mg/kg (Rat; Literature study) ATE US (crap 2250.o onbodyweight Titanium dioxide (13463-67-7) LD50 oral rat > 5000 mg/kg LC50 inhalation rat (mg/I) 5.09 mg/I/4h ATE US (vapours) 5.090 mg/1/4h ATE US (dust,mist) 5.090 mg/I/4h oc amethylcyclotetrasiloxane (556-67-2) LD50 oral rat > 4800 mg/kg (Rat; Equivalent or similar to OECD 401; Experimental value) LD50 dermal rat > 2400 mg/kg bodyweight (Rat; Experimental value; Equivalent or similar to OECD 402) LD50 dermal rabbit > 4640 mg/kg (Rabbit) LC50 inhalation rat (mg/1) 36 mg/1/4h (Rat; Experimental value) ATE US (vapours) 36.000 mgN4h ATE US (dustmist) 36.000 mgN4h Skin corosionfiritation Serious eye damagelrritation Respiratory or skin sensitisation Gem cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Not classified pH: 8.5 Not classified pH: 8.5 May cause an allergic skin reaction. Not classified Not classified Suspected of damaging fertility or the unborn child. Not classified Not classified Not classified 21//2/2016 US -OSHA - en 519 Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register/ Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Symptomsfinjuries after skin contact May cause an allergic skin reaction. �SECTION Ecology - general The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment. Methyltds(1-methylpropylideneaminooxy)silane (22984-54-9) _ LC50 fish 1 > 560 mgA (96 h; Pisces; Reaction product) EC50 Daphnia 1 750 mgA (48 h; Daphnia magna; Reacfion product) _ Titanium dioxide (13463-67-7) LC50 fish 294 mgA LC50 other aquatic organisms 1 > 500 mgA octamethylcyclotetrasiloxane (556-67-2) LC50 fish 1 > 1000 mg/I (96 h;.Salmo gairdned (Oncorhynchus mykiss); Nominal concentration) EC50 Daphnia 1 > 500 mgA (24 h; Artemia salina; Nominal concentration) LC50 fish 2 > 500 mgA (96 h; Brachydanio rend; Nominal concentration) EC50 Daphnia 2 > 0.015 mgA (48 h; Daphnia magna; GLP) Threshold limit algae 1 > 0.022 mgA (96 h'Selenastrom capncomutum; GLP) '12. Pels_s`te'nCe1f idegiedati(lify ' 12 3:`Bi_t�acctunWative'potentiaf„- "` — — '-'--•"i Methyftds(1-methylpropylideneaminooxy)silane (2298454-9) Bioaccumulative potential No bieacoumulabon data available. octamethylcyclotetrasiloxane (55"7-2) BCF fish 1 12400 (672 h; Pimephales promelas; GLP) Log Pow 4.45 - 5.1 (Literature; 6.488; Experimental value; Other; 25.1 `C) Bicaccumulative potential High potential for bioaccumulation (BCF > 5000). No additional information available Effect on the global warming No known effects from this product SECTIONp•considerations j31aYYastelreatrneltfinethalis„- - _ i _. _-..._ _ -, .. - _ Waste treatment methods Dispose of contents/container in accordance with licensed collector's sorting instructions. Waste disposal recommendations Dispose in a safe manner in accordance with Iccal/national regulations. SECTION 14; Transport information In accordance with ADR I RID / IMDG I IATA IADN 21/12/2016 US -OSHA - en Hilt! Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register Vol: 77, No. 58 1 Monday, March 25, 20121 Rules and Regulations Not regulated for transport ;proper shipping name -__,_ Proper Shipping Name (ADR) Not applicable Proper Shipping Name(IMDG) Not applicable Proper Shipping Name (IATA) Not applicable Proper Shipping Name (ADN) Not applicable Proper Shipping Name (RID) Not applicable 14.3. ransport haiaidclass(es)w_ ADR Transport hazard class(es) (ADR) Not applicable IMDG Transport hazard dass(es) (IMDG) Not applicable IATA Transport hazard classiest)(IATA) Not applicable ADN Transport hazard cass(es) (ADN) Not applicable RID Transport hazard class(es) (RID) Not applicable 14APacki69.9rouP_._.__- Packing group (ADR) Not applicable Packing group (IMDG) Not applicable Packing group (IATA) Not applicable Packing group (ADN) Not applicable Packing group (RID) Not applicable Dangerous for the environment No �~ Marine pollutant No Other information No supplementary information available ,14;6. SpedSl precautions for iisg� Overland transport - Transport by sea No data available - Air transport No data available - Inland waterway transport Carnage prohibited (ADN) No Not subject to ADN No - Rail transport Carriage prohibited (RID) No 21/12/2016 US -OSHA - en Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet according to Federal Register Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 74 T _Transportin tiulk,acgording to:Annez Ilof MARPOL73178 and tfie IBC Code 15,t�US Fede_raf regu`la-£tor>sy-�.�_ This product or mixture does not contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40 CFR §372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372. Listed on the United -JA- Inkem_at onal iegufeti_o`re CANADA t "t, Mnaartop Sealant CFSS SIL SUGG WHMIS ClassificationI Uncontrolled product according to WHMIS classification criteria EU-Regulations No additionalinfonnalfon available Classification according to Regulation (EC) No. 127212008 [CLP] Skin Sens. 1 H317 Aquatic Chronic 3 H412 Full text of hazard classes and H-statements : see section 16 National regulations Listed on IARC California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or reproductive harts Revision date 12/21/2016 Full text of H-statements: H226 Flammable liquid and vapour H315 Causes skin irritafion H317 May cause an allergic skin reaction H319 Causes serious eye irritation H351 Suspected of causing cancer H361 Suspected of damaging fertility, or the unborn child H413 May cause long lasting harmful effects to aquatic life 2111212016 US -OSHA - en sto _I - Hilti Firestop Sealant CFS-S SIL SL/GG Safety Data Sheet - according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations HMIS III Rating - Health 0 Minimal Hazard - No significant risk to health Flammability 0 Minimal Hazard - Materials thatwill not bum Physical 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self -react. Non -Explosives.. Personal protection B B - Safety glasses, Gloves SOS US Hilti This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product -an 919 June 17,2019 To Wham It May Concern: Re: Hilti CFS-S SIL SL Firestop Sealant — LEED Information Item Numbers: 2076884 2076885 The Hilti CFS-S SIL SL Firestop Sealant is manufactured in Toronto, Ontario. There is no post -consumer or post-industrial content in CFSS SIL SL and it cannot be recycled. The CFS-S SIL SL does not contain any Rapidly Renewable Materials. The VOC content for CFS-S SIL SL is 50 grams/liters. CFS-S SIL SL is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for the disposal of non - regulated industrial waste can vary from state to state and even city to city. For this reason, you should consult your local and state regulatory agencies for direction on disposal. Please feel free to contact me at (918) 872-3704 if you have questions. Sincerely, j l/ S 4 Jerry Metcalf MPH, CHMM Sr. Manager, Safety/ Environmental Hilti Inc. 918 872 3704 ierrv.metcalfno hilti.com Rev. Date: 5/30/19 The manufacturing plant location on this certificate has been provided for LEED reporting purposes only. It should never be used for Country of Origin certification or a representation of compliance/noncompliance with Buy American of Buy America requirements, as those requirements differ. The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. "Specially" produced non -catalog Hilti products may have differing manufacturing plant locations. Contact your Hilti representative in cases of°specially" produced products for a custom LEED certificate. Hilti, Inc. 5400 South 127n East Avenue Tulsa, OK 74146 1-800-879-8000 www.hilti.com m1`TI Product information High-performance intumescent firestop sealant FS�OK MAXI Applications t• For effectively sealing most common through penetrations in a variety of base materials S For use on concrete, masonry and drywall ■ Mixed and multiple penetrations 0 Metal pipe penetrations: copper, steel and EMT ■ Insulated metal pipe penetrations: steel and copper ■ Plastic pipe penetrations: closed or vented Advantages ■ US -produced: "Buy American" compliant ■ One product for a variety of common through penetrations ■ Cast -effective, easy -to -use solution ■ water -based and paintable ■ Industry -leading VOC results ■ Ethylene glycol -free Fc . rated Chemical Mold and mildew resistant resistant W FO FM FlLI, VOIOOR GVm'MATERIPL roR usslFl TRfloucN-REUEmanon nflESTOP SYSTEMS US IPRneVEa C`gD$sEE UL FlflE RE95TM'LE OIRECrORY %V] Intertek technical data Chemical basis Water -based acrylic dispersion Approx. Density 84.31b/fiI Color Red Application temperature range 41-104T Approx. cure time" 4 mm/3 days Temperature resistance range 4 to 212 "F Mold and mildew performance Class 0 (ASTM 321-96) Mold and mildew resistance Yes Surface burning characteristics UL 723 (ASTM E84) Flame spread: 0 Smoke development 10 Tested in accordance with UL 1479, ASTM E814, ASTM E84, CAN/ ULC-S115, ASTM G21, ASTM E90 California State fire marshal approval CSFM Listing 4485-1200:0108 for FS-ONE MAX Intumescent Firestop Sealant Expansion ratio (unrestricted, up to) 1:5 at 75`5/24`C, 50% relative humidity I r15Y Order Designation Package Content FS-ONE MAX 20oz foil (3 case +disp) 1x Foil pack dispenser manual CS 270-Pt, 75x Firestop sealant FS-ONE MAX 20 ez fail .FS-ONE MAX 10oz tuba (1 case) 12t Faestop sealant FS-ONE MAX 10 oz cartridge FS-ONE MAX 5 gallon (18 pails) lax Firestop sealant FS-ONE MAX 5 gallon pail IFS -ONE MAX20oz foil (1 case) 25X Firestop sealant FS-ONE MAX 20 oz fail FS-ONE MAX 20oz foil (3 cases) 75x Firestop sealant FS-ONE MAX 20 oz foil FS-ONE MAX 20oz Foil -Pallet 600x FSONE-MAX 20 oz foil, 290x Bulk Shipping Condition FS-ONE MAX 10 cz cartridge Fs -ONE MAX 5 gallon pail Hilti. Outperform. Outlast. HIM, Inc. (USA) 1-800-879-80001 www.us.htlfi.ccnn I an espanol 1.800-879-50001 Hill (Canada) Corp. 1-600-363-44581 www.hihi.ca Nam number 3530252 3530249 3530263 3530251 3534713 2101531 2101533 f101mj®] m 0 CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date 20150108-R13240 R13240 2015-January-08 Issued to: Hilti Construction Chemicals, Div of Hilti Inc. 5400 S 122nd East Ave Tulsa, OK 74146 This is to certify that Fill, Void or Cavity Materials representative samples of Fill, Void or Cavity Materials Certified for Canada FS-ONE MAX Intumescent Sealant for use in Through - Penetration Firestop and Joint Systems in the UL Fire Resistance Directory and in the Products Certified for Canada Directory. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for safety: ANSI/UL 1479, "Fire Tests of Through -Penetration Firestops,ir — Edition 4 ANSI/UL 2079, "Tests for Fire Resistance of Building Joint Systems," — Edition 4 — Revision Date 2014/12/17 CAN/ULC-S115, "Standard Method of Fire Tests of Firestop Systems." — Edition 4 — Issue Date 2011 /06/01 Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Classification Mark should be considered as being covered by UL's Classification and Follow -Up Service. The UL Classification Mark includes: UL in a circle: with the word "CLASSIFIED" ® (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of UL's evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. Look for the UL Classification Mark on the product. Wi��ay,�iector, MGM Amer4sn Certificaton Programs 11 UL LIC V® Any iron boat oneeonmeemanun invoMng UL Nark —al ereprnviEN on behatl at UL LLC(UL)or anyauMmhN iicenseeof UL For Ques4ons,please contact a local UL Customer Service ReprxsenpYve at vnvw.ul.wm Imntaclu s Page 1 of 1 FS-ONE MAX; CFS-FIL Safety Data Sheet according to Federal Register / Vol. 77. No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 07/0412017 Revision date: 07/0412017 Supersedes: 12/172015 Version: 1.3 11.Identlfi_cation-----�-'--�_ _._,. �____._---------'----- - -� --�-•----�.._. - - --_ __ _.._-- ---'T Product form Mixture Name FS-ONE MAX; CFS-FIL Product code BU Fire Protection Chemical structure • F7W_—. A� 1 2;Relevan[ tdentifi_eti uses of the sulx_s_tanc_e_or mixtur_e_and uses advfse(iagainsf __�_____,-�_ __ _^ _„_._j No additional information available i _ ;4,. - _ -il_s &_the supplier of the safety data sheet Hilti, Inc. Legacy Tower, Suite 1000 75024 Plano - USA T +1 9724035800 1-800-879-8000 toll free - F +1 918 254 0522 Supplier Hilti, Inc. Legacy Tower, Suite 1000 75024 Plano - USA T +1 9724035800 1-800-879-8000 toll free - F +1 918 254 0522 .1.4.Emergency telephone number Department issuing data specification sheet Hilti AG FeldlumherstraRe 100 9494 Schaan - Liechtenstein T +423 234 2111 chemicals.hseravlhilti.com Emergency number Chem -Tree Tel.: 1 800 424 9300 (USA, PR, Virgin Islands, Canada) Tel.: 703 527 3887 (Other countries) +1 918 6723000 1-800-879-8000 toll free SECTIONidentification GHS-US classification Not classified _...----_---�-- OHS-US labelling No labelling applicable No additional information available ..,. 2;4 Unknown acute toxici___ty_(GHSUSJ��____—�,�,._-__��� Not applicable 05/07/2017 US -OSHA - en 1f7 FS-ONE MAX, CFS-FIL Safety Data Sheet according to Federal Register Vol. 77. No. 58 / Monday, March 26. 2012 / Rules and Regulations SECTION 3: Composition/information on ingredients 3.-- Not applicable .3;2:�__Mixture._...�____�______._�__.�•�._..._..__...�____.__...�—._.—.--_....__.v �a.�.__d___e...__u�_�....� Name Product ide bfier - % GHSLS classification Ouar� ICAa Na) 14808-80.7 2.5-5 Cam. tA, H350 Full text of H-statements: see section 16 SECTION .1.Oesgnptionoffirstaidmeasures__�.,-„-_r_.-,_ First -aid measures after inhalation Get medical advice/attendon if you feel unwell. First -aid measures after skin contact Wash skin with plenty of water. If skin irritation occurs: Get medical advice/attention. First -aid measures after eye contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First -aid measures after ingestion Get medical advice/attention if you feel unwell. 4 2: Mast impoitanfs = to`ms and effects, _both acute`and delay_e',d""" No additional information available No additional information available • 33Fzfinguishfngmed7a _ _ Suitable extinguishing media Water spray. Dry powder. Foam. Carbon dioxide. 5 2: Special frazardsansmg from the substance ormfzture ' J'" - """" ^"'"-`:�'•1 Reactivity The product is nen-reactive under normal conditions of use, storage and transport 50-Advice for firefigfi[eis""-""^ �'"" — - - _ _ _ _ _ _ - y -`"`i Protection during firefighting Self-contained breathing apparatus. Complete protective clothing. SECTION Accidental _.v_.v _Personal.precautions,.prote_ctiveequipm'_hnt_and,emergencyprocedures _• 6.1.1. For non -emergency personnel No additional information available 6.1.2. For emergency responders Protective equipment For further information refer to section 6: "Exposure controls/personal protection". No additional information available 6..-Oe-fhods artd Wa-Erial for contalnmerif and cleaning up - � •_ ';_,�_/ Methods for cleaning up Mechanically recover the product 6_:A:'Referencetoothers`e`ctions' __ 1 For further information refer to section 13. 05/07/2017 US -OSHA - en 217 FS-ONE MAX; CFS-FIL Safety Data Sheet according to Federal Register/ Vol. 77, No. 581 Monday, March 26, 2012 / Rules and Regulations SECTIONr r storage Precautions for safe handling Wear personal protective equipment Hygiene measures Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product 7 2 Condittoos for safe storage, including any mcom7pati611ittes �._...aV.=._ ��� __,��. •� Storage conditcns Keep cool. Store in a dry place. Storage temperature 41 - 77 °F SECTION 8: Exposure controls/personal protection Quartz.(14808-60-7). OSHA Remark (OSHA) (3) See Table Z-3. Additional information The product has a pasty consistency. Exposure limit values for respirable dusts are not relevant for this product $:_2"_"_Exposure coritrots •,�„_ - - '""';�w`� Personal protective equipment Protective clothing. Safety glasses. Gloves. Hand protection Protective gloves.. EN 374. Eye protection Chemical gaggles or safety glasses. Skin and body protection Wear suitable protective clothing. SECTIONand chemical properties 91;litforrnahonaste p , on bhysical'artd chemica(properfies _ _ _ `�'"•'•�`--i Physical state Liquid Appearance Pasty. Colour red Odour characteristic - Odour threshold Not determined pH = 7.85 Melting point Not applicable Freezing point No data available -- Boiling point No data available - Flash point Not applicable Relative evaporation rate (butylacetate=l) No data available Flammability (solid, gas) No data available Explosive limits No data available Explosive properties No data available Oxidising properties No data available Vapour pressure No data available Relative density No data available Relative vapour density at 20 °C I No data available 05/07/2017 US -OSHA - en 3O FS-ONE MAX; CFS-FIL Safety Data Sheet according to Federal Register Vol. 77. No. 58 / Monday, March 26, 2012 / Rules and Regulations Density =1.35 g/cm' Molecular mass Not determined Solubility No data available Log Pow No data available Auto -ignition temperature No data available Decomposition temperature No data available Viscosity No data available Viscosity, kinematic No data available Viscosity, dynamic No data available _.._._ 9,2._Otf�er information VOC content 9 gA SECTIONt The product is non -reactive under normal conditions of use, storage and transport Stable under normal conditions. 10 3 Possibility of hazaMous reactrons w� � _ _ _ _ _ _ � _ _ No dangerous reactions known under normal conditions of use. IQ41196 CRIIIJ ri_stoav_oidl=^___.`�� None under recommended storage and handling condifions (see section 7). _com_ . 10:5;Incomp—abl-ematenals No additional information available Under normal conditions of storage and use, hazardous decomposition products should not be produced. irrforrnati_o`n on Eoxi_coltigical effects- Acute toxicity Not classified Skin corrosionfinritation Not classified pH: =7.85 Serious eye damagefirritation Not classified pH: =7.85 Respiratory or skin sensitisation Not classified Germ cell mutagenicity Not classified Carcinogenicity Not classified Reproductive toxicity Not classified Specific target organ toxicity (single exposure) Not classified Specific target organ toxicity (repeated Not classified exposure) 05/07/2017 US -OSHA - en 4/7 FS-ONE MAX; CFS-FIL Safety Data Sheet according to Federal Register / Vol. 77. No. 58 / Monday, March 26, 2012 / Rules and Regulations Aspiration hazard Not classified SECTION Ecology - general The product is not considered harmful to aquatic organisms nor to cause long -tens adverse effects in the environment Peis�stence anddeg@datiility� No additional information available No additional information available No additional information available Effect on the global warming No known effects from this producL SECTION••sal considerat Waste treatment methods Dispose of contents/container in accordance with licensed collector's sorting instructions. Waste disposal recommendations Dispose in a safe manner in accordance with Iccallnational regulations. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN D- 14.1_ UN number Not regulated for transport 14.2. UN propershi in name Not applicable Not applicable Not applicable Not applicable 14.3. Trans rt hazard class es Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable Not applicable 14.5. Environinental hazards Dangerous for the environment: No Dangerous for the environment: No Manne pollutant: No Dangerous for the environment: No Dangerous for the environment: No No supplementary information available 05/07/2017 US -OSHA - en W FS-ONE MAX; CFS-FIL - Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 146 $p@ctal precautions for.user`_ _- _ - Overland transport - Transport by sea No data available - Air transport No data available - Rail transport Carriage prohibited (RID) _ No 14 7Jransport in tiulli accorcling_to Annez 1(of MARPOL:73175.andfhe • t5.QUS Federal regula";ior Al components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory WHMIS Classification EU-Regulations No additional information available Classification according to Regulation (EC) No. 127212008 [CLP] Net classified National regulations Quartz (14608�0-7) Listed on IARC (International Agency for Research on Cancer) California Proposition 65 - This product does not contain any substances knovm to the state of California to cause cancer, developmental and/or reproductive harm Revision date 07/04/2017 Full text of H-statements: H350 May cause cancer C5I07/2017 US -OSHA - en 6n FS-ONE MAX; CFS-FIL Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 20121 Rules and Regulations NFPA health hazard NFPA fire hazard NFPA reactivity Hazard Rating Health Flammability Physical Personal protection 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. 0 - Materials that will not bum under typical dire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. 0 - Material that in themselves are normally stable, even under fire conditions. 0 Minimal Hazard - No significant risk to health 0 Minimal Hazard - Materials that will not bum 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self -react Non -Explosives. B B - Safety glasses, Gloves SDS US Hilti This information isbased on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 05/07/2017 US -OSHA -en 7/7 June 17, 2019 To Wham It May Concern: Re: Hilti FS-ONE Max Firestop — LEED Info. Item Numbers: 2101531 2101532 2101533 The Hilti FS-ONE MAX Firestop is manufactured in the United States There is no post -consumer or post-industrial recycled content in FS-ONE MAX and it cannot be recycled. The VOC content for FS-ONE MAX is 9 grams/liters. FS-ONE MAX is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for the disposal of non - regulated industrial waste can vary from state to state and even city to city. For this reason, you should consult your local and state regulatory agencies for direction on disposal. Please feel free to contact me at (918) 872-3704 if you have questions Sincerely, Jerry Metcalf MPH, CHMM Sr. Manager, Safety/Environmental Hilti Inc (918) 872 3704 ierry.metcalf(@hilti.com Rev. Date: 5/30/19 The manufacturing plant location on this certificate has been provided for LEED reporting purposes only. It should never be used for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America requirements, as those requirements differ. The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. "Specially" produced non -catalog Hilti products may have differing manufacturing plant locations. I , Contact your Hilti representative in cases of 'specially' produced products for a custom LEED certificate. HIM, Inc. 5400 South 122n0 East Avenue Tulsa, OK 74146 1-800-879-8000 www.hilti.com Thermafibero SafingTM - Exceptional performance in Perimeter Fire Containment Systems Provides life saving fire protection in rated assemblies + Fire resistant to temperatures above 2,000°F(1,093°C) Easy to fabricate for through penetrations and firestopping + Conserves energy, reduces greenhouse gas emissions + Resists moisture + Controls noise and sound LEED° v2009 Green Building Credits Minimum Energy 3 Materials Indoor Innovation m Atmosphere &Resources Environmental Resign o /� Quality 70 1^42.1,2.2 ; 9 1� Recycled 4.1.4.2 . Content' 5.1, 5.2 The mr afiber �p55yFjF, �L c�us Made in the USA Intertek Thermafiber® SafingTM Insulation Description Product Options: Installation: Standard Sizes: Technical Data: Fire -Containment Tests Per ASTM E 2307 Standards Compliance: Thermafiber"' Insolutions9': For Further Information: Notice: Submittal Approvals: THERMARBER Safni products are designed to provide life saving fire protection in perimeter fire containment systems, floor and wall penetrations, construction joints, and other firestopping applications. These products am noncombustible, moisture -resistant, noncorrosive, ncndetedorating, mildew -proof and vermin -proof. Themtafiber Safing provides thermal insulation, fire protection, and acoustical control in many different UL and Intertek (formerly OPL) listed fire containment assemblies of 1, 2, and 3-hr ratings. Safing 4.0 pcf, 2" or greater thickness, is available with or without a vapor retarding foil facing. • Safing 6.0 pot. 1.5" or greater thickness, is available with or without a vapor retarding foil facing. • Recycled Content Options': EPA Choice Fiber (US Government Buildings)........ Minimum 75% Standard Fiber.. ......... ........................................................ 70% 'Recycled career options other than Standard must be specked at erne of order. All firestopping insulation should be installed per the architectural specification or system specific test description. All compressed Safing insulation should be installed per the listed assembly. • Perimeter Installation: Safinit s insulation should be compression fitted between the slab edge and the FireSpan curtain wall insulation, leaving no voids. • Penetration Application: Safing insulation should be cut slightly larger than the opening and compression fitted into the opening, leaving no voids. • Construction Joint Application: Safing insulation should be compression fitted into the joint opening, leaving no voids. Thickness' Widths" Lengths'" Safin 4.0 cf 1 "- 7" 16", 24". 36" 48". 60, Safln,q 6.0 pi 1 "- 7" 16". 24" 36" Tolerances +114" - 1/8" ±1/8" 'Thicknesses are available in V increments. "Custom sizes are available upon request. 6 Safin "" insulation is a critical component of an g p y perimeter fire containment system. Thermafiber*' has performed decades 5 of testing in all of the containment systems listed below. For more complete test information, see SA707, THERMAReER i? Life -Safety Fire Containment Systems technical catalog or ULz and Interteke (formerly OPL) Directories. For a full listing of containment systems visit www.thermafibeccom and click on Fire Rated Assemblie�ceIItYPEjJW E • Aluminum Spandrel Curtain Wall Fire Containment • Steel Stud-Framed/Gypsum Sheathing Curtain Wall Fire Containment • Glass Spandrel Curtain Wall Fire Containment • Granite Spandrel Curtain Wall Fire Containment F • Precast Concrete Spandrel Safingi Insulation meets the fallowing: - ASTM C 665 Non -corrosive, Type I, III z ASTM C 612 Type IA, IB, II ASTM E 136 Rated Non-combustible per NFPA Standard 220 ob CANNLC S114 Complies = ASTM E 96 Untamed, 50 Penns as tested a ASTM E 96 Foil Faced, 0.02 Penns as tested ASTM C 1104 Absorbs less than 1 % by volume = CAN/ULC S702 Flame Spread 0, Smoke Developed 0 _ ASTM E 814 or UL 1479 Safing Insulation used in conjunction with an approved fill, void, or cavity material sealant or other approved material in through - penetration firestop systems - Complies UL 2079 Safing Insulation used in conjunction with an approved fill, void or cavity material is in construction joint systems - Complies CANAILC 5115 Complies Safing products are approved by: New York City Board of Standards & Appeals - (under BSA 39-74-SM & accepted by MEA-209-82-M, Vol. 4). Thermafiber offers industry leading technical and engineering assistance to architects, specifiers, and contractors. These services include CAD drawings, engineering judgments, LEED® Credit Information, product recommendations, a and customized products. Contact our technical services department at. 1-888-834-2371, or email technicalservice@owensccrning.com For additional information about these or other Thermafiber products contact us at 1-888-834-2371 or visit our website wwwAllermafibercom. Th ESMARPER, Inc, slat not be liable for incdental and cortequentd damages. directly a indirectly suslaned, nor for any loss caused by abdication of these cocas not in accordance with cement brintse instructions or to other than the intended use; T Envy ER Facility is er Rneed, limiter to replacement cl cafective eccim. Any claim that be ceemed waived unless made in wdtine Within thirty (W days from care it was a reascnacly should have been discovered. Tested to ASTM C 518 Tested to ASTM E 84 Unfaced Foil Faced Product Designation Actual Density "It" @ 750 [24"C] BTU.in/hrsq. ft. °F "R" value per inch of thickness— Flame spread Smoke Developed Flame spread smoke Developed Safing 4.0 pcf 0.24 'R'= 4,2 0 0 25 0 Safing 6.0 pcf 0.24 'R'= 4.2 0 0 25 0 - R= thickness divided by'k' IlleptrtAET, 3711 Mill Street I Wabash, IN 46992 1 888-TFIBERI [834-2371] 1 [260] 563-2111 1 www.thermafiber.com CERTIFICATE OF COMPLIANCE Certificate Number 20151218-R10905 Report Reference R10905 Issue Date 2015-December-18 Issued to: Thermafiber Inc. 3711 Mill St Wabash, IN 46992 USA This is to certify that Forming Materials representative samples of Forming Materials Certified for Canada Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: ANSI/UL 1479, "Fire Tests of Through -Penetration Firestops," ANSI/UL 2079, "Tests for Fire Resistance of Building Joint Systems," and ANSI/ASTM E2307 (2010), "Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate -Scale, Multi -story Test Apparatus." CAN/ULC-S115 (2005), "Standard Method of Fire Tests of Firestop Systems." Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow -Up Service. Look for the UL Certification Mark on the product. Bruce ManrennoM Director NONI American Certinramn Program ULLLC My inrarmam and dommendtlon inwNhe UL Nark service we MovMedonE all a ULLL (UL) or any auNmaad Iloarom o/ UL For yuabona. pleas coomAa local UL Cusb mer Service Rapreserrlanve 4 hrom ul om aEauWNa affmsl Page 1 of 3 CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date 20151218-R10905 R10905 2015-December-18 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Type SAF mineral wool batts for use in Joint System Nos. BW-S-0029, FF-D-0002, FF-D-0011, FF-D-0013, FF-D-0014,FF-D-0015,FF-D-0016,FF-D-0017,FF-D-0019,FF-D-0022,FF-D-0023, FF-D-0025,FF-D-0026, FF-D-0028,FF-D-0073,FF-D-0074,FF-D-0096,FF-D-0097,FF-D-0109,FF-D-1001,FF-D-1002,FF-D-1003, FF-D-1004, FF-D-1006,FF-D-1007, FF-D-1008,FF-0-1010,FF-D-1015,FF-D-1016,FF-D-1020,FF-D-1021, FF-D-1024, FF-D-1025, FF-D-1027, FF-D-1036, FF-D-1039, FF-D-1040,FF-D-1041,FF-13-1042,FF-D-1045, FF-D-1 047, FF-D-1 098, FF-D-1 125, FF-D-1 158, FF-D-3003,FF-D-3004,FF-S-1031,FF-S-1033,FW-D-0001, FW-D-0004, FW-D-0007, FW-D-0009, FW-D-0010, FW-D-0011, FW-D-0012, FW-D-0014, FW-D-0017, FW-D-0018, FW-D-0020, FW-D-0021, FW-D-0023, FW-D-0024, FW-D-0027, FW-D-0050, FW-D-0051, FW-D-0067, FW-D-0068, FW-D-1001, FW-D-1002, FW-D-1003, FW-D-1005, FW-D-1006, FW-D-1007, FW-D-1009, FW-D-1010, FW-D-1016, FW-D-1017, FW-D-1020, FW-D-1024, FW-D-1033, FW-D-1035, FW-D-1037, FW-D-1038, FW-D-1039, FW-D-1040, FW-D-1044, FW-D-1047, FW-D-1055, FW-D-1070, FW-D-1089, FW-D-1092, FW-D-1093, FW-D-1102, FW-D-1103 FW-S-1016, FW-S-1019, HW-D-0001, HW-D-0002, HW-D-0006, HW-D-0009, HW-D-0013, HW-D-0016, HW-D-0017, HW-D-0020, HW-D-0021, HW-D-0022, HW-D-0023, HW-D-0025, HW-D-0026, HW-D-0027, HW-D-0028, HW-D-0029, HW-D-0030, HW-D-0031, HW-D-0034, HW-D-0038, HW-D-0039, HW-D-0040, HW-D-0042, HW-D-0043, HW-D-0044, HW-D-0045, HW-D-0046, HW-D-0047, HW-D-0049, HW-D-0050, HW-D-0051, HW-D-0052, HW-D-0054, HW-D-0055, HW-D-0058, HW-D-0059, HW-D-0062, HW-D-0064, HW-D-0067, HW-D-0069, HW-D-0072, HW-D-0073, HW-D-0075, HW-D-0079, HW-D-0086, HW-D-0087, HW-D-0088, HW-D-0089, HW-D-0091, HW-D-0092, HW-D-0099, HW-D-0100, HW-D-0101, HW-D-0102, HW-D-0103, HW-D-0104, HW-D-0105, HW-D-0106, HW-D-0107, HW-D-0108, HW-D-0118, HW-D-0122, HW-D-0123, HW-D-0127, HW-D-0128, HW-D-0131, HW-D-0136, HW-D-0137, HW-D-0139, HW-D-0140, HW-D-0143, HW-D-0146, HW-D-0149, HW-D-0152, HW-D-0153, HW-D-0154, HW-D-0156, HW-D-0157, HW-D-0160, HW-D-0166, HW-D-0168, HW-D-0170, HW-D-0171, HW-D-0172, HW-D-0173, HW-D-0174, HW-D-0177, HW-D-0178, HW-D-0185, HW-D-0186, HW-D-0187, HW-D-0188, HW-D-0190, HW-D-0192, HW-D-0199, HW-D-0200, HW-D-0201, HW-D-0204, HW-D-0205, HW-D-0206, HW-D-0208, HW-D-0211, HW-D-0218, HW-D-0220, HW-D-0221, HW-D-0222, HW-D-0246, HW-D-0248, HW-D-0252, HW-D-0253, HW-D-0258, HW-D-0259, HW-D-0263, HW-D-0265, HW-D-0278, HW-D-0279, HW-D-0297, HW-D-0298, HW-D-0299, HW-D-0335, HW-D-0336, HW-D-0337, HW-D-0338, HW-D-0354, HW-D-0357, HW-D-0358, HW-D-0359, HW-D-0363, HW-D-0365, HW-D-0366, HW-D-0367, HW-D-0377, HW-D-0378, HW-D-0380, HW-D-0381, HW-D-0384, HW-D-0385, HW-D-0388, HW-D-0389, HW-D-0391, HW-D-0395, HW-D-0396, HW-D-0404, HW-D-0405, HW-D-0406, HW-D-0407, HW-D-0408, HW-D-0409, HW-D-0410, HW-D-0411, HW-D-0412, HW-D-0413, HW-D-0414, HW-D-0415, HW-D-0416, HW-D-0417, HW-D-0441, HW-D-0442, HW-D-0447, HW-D-0456, HW-D-0457, HW-D-0460, HW-D-0465, HW-D-0467, HW-D-0468, HW-D-0478, HW-D-0479, HW-D-0524, HW-D-0531, HW-D-0536, HW-D-0538, HW-D-0539, HW-D-0540, HW-D-0542, HW-D-0546, HW-D-0547, HW-D-0548, HW-D-0549, HW-D-0553, HW-D-0560, HW-D-0561, HW-D-0562, HW-D-0564, HW-D-0566, HW-D-0567, HW-D-0568, HW-D-0569, HW-D-0570, HW-D-0571, HW-D-0572, HW-D-0577, HW-D-0578, HW-D-0580, Allilzaw- Bruce Majwuchc x. Ce¢far WM American C,nVicalbn Program ULLLC An, Yrtmmatlw and Locumendtian imeWur, UL Mark M. are crid. an eekalf of UL LLC JUL)., anyauU,anttd Ycenum &UL. Farq,rtatiane, Please wn acea IaW ULCueromer Savica Bep,e cendEveal Mb'llul mmlaEoululllrcallonsl Page 2 of 3 CERTIFICATE OF COMPLIANCE Certificate Number 20151218-R10905 Report Reference R10905 Issue Date 2015-December-18 Type SAF mineral wool batts for use in Joint System Nos. HW-D-0582, HW-D-0583, HW-D-0584, HW-D-0590, HW-D-0591, HW-D-0597, HW-D-0612, HW-D-0614, HW-D-0617, HW-D-0619, HW-D-0631, HW-D-0633, HW-D-0634, HW-D-0635, HW-D-0636, HW-D-0639, HW-D-0640, HW-D-0642, HW-D-0643, HW-D-0644, HW-D-0645, HW-D-0649, HW-D-0650, HW-D-0661, HW-D-0662, HW-D-0687, HW-D-0697, HW-D-0698, HW-D-0702, HW-D-0703, HW-D-0704, HW-D-0725, HW-D-0726, HW-D-0735, HW-D-0740, HW-D-0741, HW-D-0742, HW-D-0743, HW-D-0747; HW-D-0748, HW-D-0750, HW-D-1001, HW-D-1002, HW-D-1003, HW-D-1004, HW-D-1005, HW-D-1006, HW-D-1007, HW-D-1010, HW-D-1013, HW-D-1014, HW-D-1015, HW-D-1016, HW-D-1020, HW-D-1021, HW-D-1022, HW-D-1023, HW-D-1024, HW-D-1028, HW-D-1032, HW-D-1033, HW-D-1034, HW-D-1037, HW-D-1040, HW-D-1042, HW-D-1044, HW-D-1045, HW-D-1050, HW-D-I060, HW-D-1066, HW-D-1067, HW-D-1068, HW-D-1069, HW-D-1070, HW-D-1073, HW-D-1074, HW-D-1075, HW-D-1076, HW-D-1077, HW-D-1079, HW-D-1080, HW-D-1089, HW-D-1094, HW-D-1097, HW-D-1102, HW-D-1103, HW-D-1104, HW-D-1110, HW-S-0001, HW-S-0009, HW-S-0010, HW-S-0053, HW-S-0054, HW-S-0080, HW-S-0083, HW-S-1015, WW-D-0013, WW-D-0018, WW-D-0019, WW-D-0020, WW-D-0063, WW-D-1001, WW-D-1002, WW-D-0022, WW-D-0089, VWV-D-0090, WW-D-0103; WW-D-0171, WW-D-0140, WW-D-0141, WW-D-1003, WIN-D-1004, WW-D-1005, WW-D-1006, WW-D-1007, WVV-D-1010, WW-D-1015, WW-D-1016, WW-D-1023, WW-D-1027, WW-D-1036, WW-D-1037, WW-D-1042, WW-D-1047, WW-D-1089, WW-D-1090, WW-D-1091, WW-D-1128, VWV-D-1129, WW-S-0064, WW-S-1035. TYPE SAF MINERAL WOOL BATTS FOR USE IN PERIMETER FIRE CONTAINMENT SYSTEM NOS. CW-D-1001, CW-D-1002, CW-D-1003, CW-D-1004, CW-D-1005, CW-D-1006, CW-D-1007, CW-D-1008, CW-D-1009, CW-D-1010, CW-D-1011, CW-D-1012, CW-D-1013, CW-D-1014, CW-D-1015, CW-D-1016, CW-D-1017, CW-D-1018, CW-D-1019, CW-D-1020, CW-D-1021, CW-D-1022, CW-D-1023, CW-D-1028, CW-D-1029, CW-D-1030, CW-D-2001, CW-D-2002, CW-D-2003, CW-D-2005, CW-D-2006, CW-D-2008, CW-D-2009, CW-D-2010, CW-D-2011, CW-D-2012, CW-D-2013, CW-D-2036, CW-D-2037, CW-D-2038, CW-D-2039, CW-D-2040, CW-D-2041, CW-D-2042, CW-D-2046, CW-D-2047, CW-D-2048, CW-D-2049, CW-D-2050, CW-D-2051, CW-D-2052, CW-D-2055, CW-D-2056, CW-D-2057, CW-D-2058, CW-D-2059, CW-D-2063, CW-D-2064, CW-D-2065, CW-D-2066, CW-S-0001, CW-S-0002, CW-S-0003, CW-S-0004, CW-S-1001, CW-S-1002, CW-S-1003, CW-S-1007, CW-S-1010, CW-S-1016, CW-S-1017, CW-S-1020, CW-S-1022, CW-S-1023, CW-S-1024, CW-S-1025, CW-S-1026, CW-8-2001, CW-S-2002, CW-S-2003, CW-S-2006, CW-S-2008, CW-S-2014, CW-S-2021, CW-S-2022, CW-S-2023, CW-S-2025, CW-S-2029, CW-S-2034, CW-S-2035, CW-S-2036, CW-S-2058, CW-S-2059, CW-S-2060, CW-S-2061, CW-S-2062, CW-S-2064, CW-S-2065, CW-S-2066. TYPE SAF MINERAL WOOL BATTS FOR USE IN THROUGH=PENETRATION FIRESTOP SYSTEM NOS. C-AJ-1020, C-AJ-1081, C-AJ-3045, W-L-1027, W-L-1039, W-L-106 W 111065-L-2023, W-L-2036, W-L-3023, W-L-3034, W-L-7001, W-L-7002. TOPSTOP MINERAL WOOL DECK PLUGS TYPE SAF BATTS FOR USE IN JOINT SYSTEM NOS. HW-D-0001, HW-D-0002, HW-D-0020, HW-D-0022, HW-D-0034, HW-D-0039, HW-D-0043, HW-D-0086, HW-D-0088, HW-D-0160, HW-D-0161, HW-D-0456, HW-D-0612, HW-D-0644. dw xraca xanrennoM, ol,eLvr xenn amedon camnoaflon vroynm ULLLC My adonnaYon and tlavmentalun Involvllq UL Mark services we pmidad on Ixanall of UL LLC (UL) or any aull,ullx 111censae W UL Far yuestlovA ploade coact a bal UL CusWmer Soak , ftepresenbtiveA nda, lul ond",nautulll-clonal Page 3 of 3 Material Information Statement Manufactured Articles According to 19072006/EC, Article 32 Revision: 23.04.2019 — — ,1_1 ProductidenGfier.,.________---.__---_._-�__.__._:--._.__�_.___-___.____--._.._--_.___ Trade name: • Firestop Bandage CFS-B / CP 646 • Firestop Back Pan Strip CFS-BPS • Firestop Block CFS-BL 1 CFS-BL P • Firestop Board CP 675 • Firestop Boot CFS-BO • Firestop Box Insert • Firestop Cable Collar CFS-CC / CFS-RCC / CFS-RCC EXT • Firestop Cable Module CFS-T • Firestop Cast -in device CP 680 / CP 681 / CFS-CID / • CFS-CID MD P/M • Firestop Coated Board CFS-CT B / CP670 / CP673 / CP676 • Firestop Collar CFS-C / CFS-C P • Firestop Collar CP 643 / CP 644 • Firestop Composite Sheet CFS-COS • Firestop Cord CFS-CO • Firestop Cushion CP 651 N • Firestop Drop -In Device CFS-DID • Firestop Edge of Slab QuickSeal CFS-EOS QS • Firestop Endless Collar CFS-C EL • Firestop Filler Module CFS-T FB • Firestop Gangplate CFS-SL GP Version: 14 • Firestop Module Box CFS-MB / CP 657 • Firestop Plug CFS-PL / CP 658 • Firestop Plug Seal CFS-T RR 1 CFS-T RRS • Firestop Retrofit Sleeve CFS-SL RK • Firestop Sleeve CP 645 • Firestop Sleeve Kit CFS-SL SK • Firestop Speed Sleeve CFS-SL / CFS-SL GA / CP 653 • Firestop Top Track Seal CFS-TTS • Firestop Wedge Seal CFS-T WD120 • Firestop Wrap Strip CFS-W EL / SG / P / CP 648 • Foil Tapes CS -FT • Joint Sealing Tapes CSJST • Mineral Wool • Mineral Wool Boards • Multifunctional Tapes CS-MFT • Pre -coated Mineral Wool Boards • Smoke & Acoustic Track Seal CS-TTS SA • Speed Plug CP 777 • Speed Strip CP 767 1 2 Appliw6on oftt e,manufactured articfes„._.r Construction industry.. Refer to Hilti product literature, technical data sheets, 3rd parry published listings and national approvals for specific application information. For more details, please contact your local Hilti organization through htto:/twww.hilti.arouo ._ . �.,. ..._,,...w...�._� f_3 ManufactgterlSuppler Hilti AG Feldkircherstr. 100 FL-9494 Schaan Liechtenstein Customer Service Phone+423 (0)844 84 84 85 Fax+423 (0)844 84 84 86 Other A Safety Data Sheet is not required due to the classification of these products as "manufactured articles" according to Regulation (EC) No. 1907/2006 of 18 December 2006 (EU) 129CFR 1910.1200 (U.S.A.).. Consequently, these products are exempted from CLP I OSHA Labeling and SDS requirements. These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Informing department: chemicals.hseCc hilti.com September24, 2015 To Whom It May Concern: Re: Hilt! Mineral Wool-LEED Information Item Number: 236993 The Hilti Mineral Wool is manufactured in Wabash, Indiana The post -consumer recycled content in the Hilti Mineral Wool is 0%. The pre -consumer recycled content in the Hilti Mineral Wool is 90%. There is no detectable VOC content in this product. Hilti Mineral Wool is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for the disposal of non - regulated industrial waste can vary from state to state and even city to city. For this reason, you should consult your local and state regulatory agencies for direction on disposal. Please feel free to contact me at (918) 872-3704 if you have questions Sincerely, Jerry Metcalf MPH, CHMM Sr. Manager, SafetylEnvironmental Hilti Inc. 918 872 3704 ierrv. metcalf(&hilti.com Rev. Date: 9/24115 The manufacturing plant location on this certificate has been provided for LEEDS reporting purposes only. It should never be used for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America requirements, as those requirements differ. The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. "Specially" produced non -catalog Hilti products may have differing manufacturing plant locations. Contact your Hilti representative in cases of "specially" produced products for a custom LEEDS certificates. HIM, Inc. 5400 South 122o' East Avenue Tulsa, OK 74146 1-800-879-8000 www.hilti.com c`yus Classified by Undemdtem Laboratodes, Inc. to UL 263 and CANAJLC-S115 1 or 2 Hr Gypsui Assembly (2 Hr S Wall Opening Protective Materials (CLIV, CLIV7) 'ower Cable 118" thick CP617 or CFS-P PA Firestop Putty Pad Wood Stud or Steel Stud (Not Shown) UL Listed Non -Metallic Outlet Box (Refer to UL listing) Or UL Listed Metallic Outlet Box (Refer to UL listing) w Cn X O Ol] 6. O U3 rn w LL Q d n LL U Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. 2019 Hilti Firestop Systems January 30, Page: 1 of Wall Opening Protective Materials (CLIV, CLIV7) W Z X O m a O F 1 or 2-Hr. Gypsum W Wall Assembly LL (2-Hr. Shown) a Steel Stud or a Wood Stud (Not Shown) U Power Cable a CU Firestop Box Insert UL Listed No.. Metallic Outlet _ 0 Box (Refer to UL Listing) or UL Listed Metallic Outlet Box (Refer to UL Listing) O•:O INSEffr VUS i I i I WE Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. Hilti Firestop Y S stems January 30, 2019 Page: 2 of 7 Wall Opening Protective Materials (CLIV, CLIV7) CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with flush device UL Listed Metallic Outlet Boxes installed with steel mud rings or UL Listed Nonmetallic Outlet Boxes in framed wall assemblies as specified below. When protective material is used on outlet boxes on both sides of the wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back (unless otherwise indicated). Installation shall comply with the National Electrical Code (NFPA 70). Min 118 in. thick (CP 617) or min 0.2 in. (CFS-P PA) thick moldable putty pads are to be installed to completely cover the exterior surfaces of the outlet box (except for the side of the outlet box against the stud) and conduit fitfingslconnectors and to completely seal against the stud and gypsum board in the wall cavity unless otherwise noted below. When CFS-P PA is used, the putty pads may be installed with the release liner intact on the outside of the pad Atli the exception of any overlaps, in which case the liner is to be removed from the bottom layer at the overlap location. The box composition, max device dimensions, hourly rating, type of stud and type of faceplate are specified below. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4 by 4 by max 2-1/8 in. flush device UL Listed Metallic Outlet Boxes installed with steel cover plates in 1 and 2 hr. fire rated gypsum wallboard wall assemblies framed with min 3-1/2 in. deep wood or steel studs and constructed as specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4-11116 by 4-11116 by max 2-1/8 in., or max 4-3/8 by 4-7/8 by max 2-1/8 in., flush device UL Listed Metallic Outlet Boxes installed with steel cover plates for use in 1 hr fire rated V446 gypsum board/steel stud or U341 gypsum board/wood stud Wall and Partition Design No. in the Fire Resistance Directory. When U341 wall design is used, wall shall be sheathed with 518 in. gypsum board, and glass or mineral fiber batt insulation shall be installed in stud cavities in accordance with U341 design. Boxes may be installed back-to-back. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4-11/16 by 4-11/16 by max 2-1/8 in. flush device UL Listed Metallic Outlet Boxes installed with steel cover plates for use in 1 and 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep wood or steel studs and constructed of the materials and in the manner specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. Min 0.8 pcf density fiberglass batt insulation is to be installed within the wall cavity required for 1 hr fire rated gypsum board wall assemblies and optional in 2 hr fire rated gypsum wallboard assemblies. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4 by 3-3/4 by 3 in. deep UL Listed Nonmetallic Outlet Boxes manufactured by Carlon Electrical Products, made from polyvinyl chloride, and bearing a 2 hr rating under the "Outlet Boxes and Fittings Classification for Fire Resistance" category in the Fire Resistance Directory. Putty pads and boxes for use in 1 and 2 hr fire rated gypsum wallboard assemblies, framed with min 3-1/2 in. deep wood studs and constructed as specified in the individual U300 Series Wall and Partition Designs in the Fire Resistance Directory. Outlet box secured to wood stud by means of two nailing tabs supplied with the outlet box. Putty pads shall lap min 112 in. onto the stud and gypsum board within the stud cavity. Outlet boxes installed with steel or plastic cover plates. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4 by 4 by 2-7/8 in. deep UL Listed Nonmetallic Outlet Boxes manufactured by Carlon Electrical Products, made from polyvinyl chloride, and bearing a 2 hr rating under the "Outlet Boxes and Fittings Classification for Fire Resistance" category in the Fire Resistance Directory. Putty pads and boxes for use in the 1 hr fire rated V446 gypsum board/steel stud or U341 gypsum board/wood stud Wall and Partition Design in the Fire Resistance Directory. When U341 wall design is used, wall shall be sheathed with 5/8 in. gypsum board, and glass or mineral fiber batt insulation shall be installed in stud cavities in accordance with U341 design. Outlet box secured to steel stud by means of fastening tab supplied with the outlet box. Putty pads shall lap min 1/2 in. onto the stud and gypsum board within the stud cavity. Outlet boxes installed with steel or plastic cover plates. Boxes may be installed back to back. CP 617(-L, -XL) Firestop Putty Pads, for use with max 2-1/4 by 3-3/4 by 2-3/4 in. deep UL Listed Nonmetallic Outlet Boxes manufactured by Pass and Seymore, Inc., and bearing a 2 hr rating under the "Outlet Boxes and Fittings Classification for Fire Resistance" category in the Fire Resistance Directory. Putty pads and boxes for use in 1 and 2 hr fire rated gypsum wallboard assemblies, framed with min 3-112 in. deep wood studs and constructed as specified in the individual U300 Series Wall and Partition Designs in the Fire Resistance Directory. Outlet box secured to wood stud by means of two nailing tabs supplied with the outlet box.Putty pads shall lap min 1/2 in. onto the stud and gypsum board within the stud cavity. Outlet boxes installed with steel or plastic cover plates. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4 by 3-314 by 3 in. deep UL Listed Nonmetallic Outlet Boxes manufactured by Allied Molded Products, Inc., made from fiber reinforced thermoplastic and bearing a 2 hr rating under the "Outlet Boxes and Fittings Classification for Fire Resistance" category in the Fire Resistance Directory. Putty pads and boxes for use in 1 hr fire rated gypsum wallboard assemblies, framed with min 3-1/2 in. deep wood studs and constructed as specified in the individual U300 Series Wall and Partition Designs in the Fire Resistance Directory. Outlet box secured to wood stud by means of two nailing tabs supplied with the outlet box. Putty pads shall lap min 1/2 in. onto the stud and gypsum board within the stud cavity. Outlet boxes installed with plastic cover plates. F_ LU w fn Z_ X O m a O LU w LL a a a LL U m a U Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. Hilti Firestop Systems S January 30, 2019 Page: 3 of 7 Wall Opening Protective Materials (CLIV, CLIV7) CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4 by 4 in. by 1-1/2 in. deep flush device UL Listed Metallic Outlet Boxes installed with steel cover plates in 1 hr. fire rated gypsum wallboard wall assemblies framed with min 3-1/2 in. deep wood or steel studs and constructed as specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. The boxes are installed back to back with 5 in. by 4 in. UL Classified fire block, CP 657 or CFS-BL Firestop Block installed in the cavity between the two boxes. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 14 by 4 by max 2-112 in. flush device UL Listed Metallic Outlet Boxes installed with steel cover plates in 1 and 2 hr. fire rated gypsum board wall assemblies framed with min 5-1/2 in. deep wood or steel studs for 2 hr fire rated walls and min 3-1/2 in. deep wood or steel studs for 1 hr fire rated walls. Walls constructed as specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. Stud cavity insulation is required and shall consist of min 5-1/2 in. (2 hr rated walls) or min 3-1/2 in. (1 hr rated walls) thick fiberglass (min 0.8 pcf) or mineral fiber (min 4 pct). Putty pads shall lap min 1/2 in. onto the stud and gypsum board within the stud cavity. When boxes are interconnected by means of electrical metallic tube (EMT) or conduit, a ball of putty pad material shall be used to completely plug the open end of each EMT or conduit within the box. CP 617(-L, -XL) or CFS-P PA Firestop Putty Pads, for use with max 4-11/16 by 4-11/16 by max 2-1/8 in. flush device UL Listed Metallic Outlet Boxes installed with steel or plastic cover plates for use in 1 and 2 hr fire rated gypsum board wall assemblies framed with min 5-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. Putty pads shall lap min 112 in. onto the stud and gypsum board within the stud cavity. When boxes are interconnected by means of electrical metallic tube (EMT) or conduit, a ball of putty pad material shall be used to completely plug the open end of each EMT or conduit within the ouflet boxes. Metallic ouflet boxes may be provided with steel attachment brackets which offset box min 1/4 in. from stud. When steel attachment brackets are used, putty pad to be affixed to the back and all four sides of the box. CFS-P PA Moldable Putty Pads, for use with max 4-11/16 by 4-11/16 in. by max 2-1/8 in. flush device UL Listed Metallic Outlet Boxes installed with steel cover plates in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 and V400 Series Wall and Partition Designs in the Fire Resistance Directory. An additional 3/4 in. ball of putty pad material shall be used to plug the end of each electrical metallic tube or conduit at its connection to the box. CFS-P PA Moldable Putty Pads, for use with max 4 by 4 by 2-1/8 in. flush device UL Listed Metallic Outlet Boxes installed with steel or plastic cover plates in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 and V400 Series Wall and Partition Designs in the Fire Resistance Directory. An additional 3/4 in. ball of putty pad material shall be used to plug the end of each electrical metallic tube or conduit at its connection to the box. CFS-P PA Moldable Putty Pads, for use with max 14-1/4 by 4-1/2 by 2-1/2 in. flush device UL Listed Metallic Outlet Boxes installed with steel cover plates in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 and V400 Series Wall and Partition Designs in the Fire Resistance Directory. An additional 3/4 in. ball of putty pad material shall be used to plug the end of each electrical metallic tube or conduit at its connection to the box. HILTI Firestop Box Insert, for use with flush device UL Listed Metallic Outlet Boxes installed with steel mud rings or UL Listed Nonmetallic Outlet Boxes in framed wall assemblies as specified below. When protective material is used on outlet boxes on both sides of the wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back (unless otherwise indicated). Installation shall comply with the National Electrical Code (NFPA 70). The box composition, max device dimensions, hourly rating, type of stud and type of faceplate are specified below. HILTI Firestop Box Insert, for use with max 4-11/16 by 4-11116 by 2-1/8 in. deep UL Listed Metallic Outlet Boxes without internal clamps in 1 or 2 hr fire rated gypsum wallboard wall assemblies framed with min 3-1/2 in. deep wood or steel studs and constructed of materials and in the manner specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. Outlet boxes in 1 hr fire rated walls may be installed with plastic or steel cover plates. Outlet boxes in 2 hr fire rated walls shall be installed with steel cover plates. One 4-3/8 by 4-3/8 in. insert adhered to the interior back wall of the outlet box in accordance with the instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 4-3/8 x 4-3/8 in coverage. HILTI Firestop Box Insert, for use with max 4 by 4 by 1-1/2 in. deep and 2-1/8 in. deep UL Listed Metallic Ouflet Boxes without internal clamps in 1 or 2 hrfire rated gypsum wallboard wall assemblies framed with min 31/2 in. deep steel or wood studs and constructed of materials and in the manner specified in the individual U400, V400 or U300 Series Wall and Partition Designs in the Fire Resistance Directory, as summarized in the Table below. One 3-11/16 by 3-3/4 in. insert adhered to the interior back wall of the outlet box in accordance with the instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 3-11116 x 3-3/4 in coverage. LU w y Z_ X O a0 LL O Cn LU w LL a a a. ch LL U A Rio LL U Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratodes, Inc. January 30, 2019 Hilti Firestop Systems Page: 4 of 7 Wall Opening Protective Materials (CLIV, CLIV7) W Z X O m a O U3 LU w t% a a Box Size Type of Box and Cover Plate Hourly Rating Wall Type ng Wall Type 4.1/2 x 8-1/2 x 1-5/8 in deep Two 3-11/16 x 3-3/4 in. inserts 2 hour U300, U400 or V400 -wood or steel studs " 3-3/4 x 5-1/2 x 2-112 in deep One 3-11/16 x 3-314 in. insert and one 1-718 1 hour U300, U400, or V400 -woad or steel studs x 2-13116 in. inse "-Min 314 in. deep plaster rings installed over outlet box. After installation of gypsum board, nom 1/4 in. thickness of Hilti FS-ONE Sealant or FS-ONE MAX Intumescent Sealant, bearing the UL Classification Marking far Fill, Void or Cavity Materials, applied between the base layer of wallboard and the plaster ring. Wall Opening Protective Materials (CLIV, CLIV7) Firestop Box Inserts, for use with max 4 by 4 by 2-1/8 in deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 94 mm wide by 95 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with steel cover plates. A max 3/8 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with max 4 by 4 by 1-1/2 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 1 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep woad studs and with max 4 by 4 by 2-118 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 1 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U300 or U400 Seres Wall and Partition Designs in the Fire Resistance Directory. One 94 mm wide by 95 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with plastic cover plates. A max 3/8 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with 4-11116 by 4-11116 by 2-1/8 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 1 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 111 mm wide by 111 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 111 mm by 111 mm coverage and adhered to the interior back wall of the outlet box. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with plastic or steel cover plates. A max 3/8 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with 4-11/16 by 4-11116 by 2-1/8 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 2 hr fire rated gypsum board wall assemblies framed with min 3-112 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 111 mm wide by 111 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 111 mm by 111 mm coverage and adhered to the interior back wall of the outlet box. A max 318 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with steel cover plates. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with max 3-3/4 by 5-1/2 by 2-1/2 in deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 1 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel or wood studs and constructed of the materials and in the manner specified in the individual U300 or U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 94 mm wide by 95 mm high and one 47 mm wide by 71 mm high inserts adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with steel cover plates. A max 3/8 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with 4-3/8 by 4-718 by 2-1/4 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 1 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 111 mm wide by 111 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 111 mm by 111 mm coverage and adhered to the interior back wall of the outlet box. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with plastic or steel cover plates. A max 3/8 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. F- LU W fn Z_ X 0 m a to to w LL a a rn LL U r m a U Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. January 30, 2019 Hilt! Firestop Systems Page:6of7 Wall Opening Protective Materials (CLIV, CLIV7) W y Z X O m a O F to W tL' LL a a a v� U n m a U Firestop Box Inserts, for use with max 4 by 4 by 2-1/8 in deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 94 mm vide by 95 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with steel cover plates. A max 3/8 in. diam opening at one edge may be provided Firestop Box Inserts, for use with 4-3/8 by 4-718 by 2-1/4 in. deep flush device UL Listed Metallic Outlet Boxes without internal clamps in 2 hr fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep steel studs and constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Designs in the Fire Resistance Directory. One 111 mm wide by 111 mm high insert adhered to the interior back wall of the outlet box in accordance with the installation instructions supplied with the product. Smaller sized inserts may be cut and combined to achieve the 111 mm by 111 mm coverage and adhered to the interior back wall of the outlet box. Installation to comply with the National Electrical Code, (NFPA 70). Outlet boxes installed with steel cover plates. A max 318 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. Firestop Box Inserts, for use with max 4-11/16 by 4-11116 by 2-118 in. flush device UL Listed Metallic Outlet Boxes installed with steel mud rings and plastic or steel cover plates in 1 h or 2 h fire rated gypsum board wall assemblies framed with min 3-1/2 in. deep wood or steel studs and constructed of the materials and in the manner specified in the individual U300, U400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory. Min 3-1/2 in. thick fiberglass (min 0.5 pcf) or mineral wool (min 4.0 pcf) batt insulation is to be installed within the wall cavity. One 4-3/8 by 4-3/8 in. insert adhered to the interior back wall of the outlet box in accordance with the instructions supplied with the product. Installation to comply with the National Electrical Code (NFPA 70). A max 318 in. diam opening at one edge may be provided to permit access to the electrical box ground screw. When protective material is used within outlet boxes on both sides of the wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back-to-back. OLE Reproduced by HILTI, Inc. Courtesy of Underwriters Laboratories, Inc. January 30, 2019 Hilti Firestop Systems Page: 7 of 7