HomeMy WebLinkAboutProduct Evaluation Report R W R W Building Consultants, Inc.
B Consulting and Engineering Services for the Building Industry
C P.O.Box 230 Valrico,FL 33595 Phone 813.659.9197
Florida Board of Professional Engineers Certificate of Authorization No.9813
Product Evaluation Report Repoi-I No.: FL-12793.1 R1
Date: Feliniaij;9, 2012
Product Sub Category Manufacturer .Product Name
Category
Swinging Therma Tru Corporation Craftsman Fiberglass Door
Exterior Exterior Door 118 Industrial Dr w/Flush Fit Glazing Frame
Doors Assemblies Edgerton,OU 43517 Inswing I Outswing
Phone 419.298.1740 .'Non-impact!'
scope., Product Evaluation report issued by R W Building Consultants,Inc.&Lyndon F.Schmidt,P.E.(System ID#1998)for
Therma Tru Corporation,based on Rule Chapter No.9N-3,Method I D of the State of Florida Product Approval,Department of
Business&Professional Regulation.
RW Building Consultants and Lyndon F.Schmidt,P.E.do not have nor will acquire financial interest in the company manufacturing
or distributing the product or in any other entity involved in the approval process of the product named herein.
Limitations.
1. This product has been evaluated and is in compliance with the 2010 Florida Building Code(FBC)structural requirements excluding the
"High Velocity Hurricane Zone"(HVHZ).
2. Product anchors shall be as listed and spaced as shown on details.Anchor embedment to base material shall be beyond wall dressing
or stucco.
3. When used in areas requiring wind borne debris protection,this product is required to be protected with an impact resistant covering
that complies with Section 1609.1.2 of the FBC.
4. For 2x stud framing construction,anchoring of these units shall be the same as that shown for 2x buck masonry construction.
5. Site conditions that deviate from the details of drawing FL-12793.1 require further engineering analysis by a licensed engineer
or registered architect.
6. See drawing FLA 2793.1 for size and design pressure limitations.
Supporting Documents:
i. Test Report No. Test Standards Testing Laboratory Signed by
TEL 01460136 ANSI/AAMAINWWDA 10111-S.2/A440-05 Testing Evaluation Laboratory Lyndon F.Schmidt,P.E.
TEL 01460145 ASTM E 330-02 Testing Evaluation Laboratory Lyndon F.Schmidt,P.E.
2. Drawing No. Prepared by Signed&Sealed by
No.FL-12793.1 RW Building Consultants,Inc.(CA#9813) Lyndon F.Schmidt,P.E.
3. Calculations Prepared by Signed&Sealed by
Product Anchoring RW Building Consultants,Inc.(CA#9813) Lyndon F.Schmidt,P.E.
Buck Anchoring RW Building Consultants,Inc,(CA#9613) Lyndon F.Schmidt,P.E.
4. Quality Assurance
Certificate of Participation issued by National Accreditation and Management Institute,certifying that Therma Tru Corporation
is manufacturing products within a quality assurance program that complies with ISOBEC 17020 and Guide 53.
Lyndon F.Schmidt,P.E.
FL PE No.43409
2/14/2012
PF 1485 Sheet 1 of 1