HomeMy WebLinkAboutNotice of Acceptance MIAMI DA09 MIAMI-DADS COUNTY
PRODUCT CONTROL,SECTION
11805 SW,26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION 'T(7:86)315-2590 F(786)31525-99
NOTICE OF ACCEPTANCE (NOA) ww,i,.n,iamidade.eov/ecoaorov
Interwrap,Inc.
32923 Mission Way
Mission,BC,Canada V2V4E4
SCOPE:
This NOA is being issued under•'the applicable rides and regulations-governing the,use of construction materials.The
documentation submitted has:been reviewed and accepted by Miami-Dade County RER-,Product Control Section to be
used in Miami Dade County and other areas;where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade. County Product. Control
Section (In Miami Dade County) and/or the AHJ (in areas other than Miaini Dade County) reserve the right to
have this product or material tested for quality assurance purposes. If this product or material fails to perform in
the accepted, manner, the .manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify,or suspend the use ofsuch product.or material within their jurisdiction. RER reserves.the xight to
revoke this acceptance, if it.is determined by Miami-Dade County Product Colitrol Section that,this product,-or
material fails to meet the requirements of the applicable building code.
This product is approved as described herein;and has been designed to comply with the Florida Building Code
,including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Titanium`UDLr25 PLUS,Titanium,UDL-30,Titanium®UDL-50 UDL TT,UD.L TF,
UDL TTMC-300,RhinoRoof U10,RhinoRoof.U15,Rh►noRo.of U20,Titanium UDL25,and
RhinoRoof RSA Synthetic Underlayments
LABELING: Each unit shall bear a permanent-label withthe manufacturer's.name or logo,city, state and.following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this-NOA shall be considered.after a renewal application1as:been filed,and there has been no:change.
in the applicable building:code;negatively affecting the performance of this product,
TERMINATION of this N.OA will occur after the expiration date,or if there has-been a:revison or change`in:the
materials,use,,and/or.manufacture.of the product or process.Misuse of this NOA as an endorsement of any product,
for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to.comply with any section
of this NOA.shall.be cause.for termination and removal of NOA.
'ADVERTISE'MENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
.expiration.date may displayed in a'dvertis'ing literature: If any portion of the NOA is displayed,then it shall be done
in,its entirety.
INSPECTION A copy o.fthis entire NOA sl1alI be provided to the user by the manufacturer or its distributors;and.
shall be available for inspection,at the job site at the request of the'Building Official.
This NOA renews and revises NOA No. 13-0610.01 and consists of pages ]'through 5.
The subtilitted docu n-entation was YeYlewed by Alex Tigera.
NOA No.:14-0603.18
QMIAMMI•DADE COUNTY Expiration Date: 08/08/18
Approval Date: 06/11/15
Page.I of,5
ROOFING COMPONENT APPROVAL
Cateaory: Roofing
Sub-.Cateeory: Underlayment
Material: Polypropylene
SCOPE:
This acceptance is for Titaniuiri'UDL-25:P.LU$i Titanium's UDL-30 TitaniumO UDL-50,UDL TT,UDL,TF,:
UDL TTMC-300;RhinoRoof`U10,RhinoRoof'U15,RhinoRoof-U20,Titanium UDL25,and'RhinoRoof RSA
Synthetic Underlayments as described in this Notice of Acceptance, for use with approved prepared roof assemblies.
where ASTM D226 Type undeclayment is specified and installed with prescribed approved fasteners and-fastener
densities.Designed to comply with the Florida.Building Code including the High Velocity Hurricane Zone of the
Florida Building,Code
PRODUCT DESCRIPTION:
Test Product
Product Dimensions Specification Description
Titanium°UDL-25 PLUS, 48"x 250' rolls ASTM D226 Woven,synthetic polymer underlayment with one
1Llai z factizring; Type I&Il: side.coated'wi.th UV protected and-slip resistant
Location#1 polymer stabilized polypropylene on.both sides.
Titanium®UDL-30. 48"x 250' rolls ASTM D226 Woven synthetic.polymer.undedayment with two
.Manufacturing Type I&1I sides coated with UV protected and slip resistant
Location#1 polymer stabilized polypropylene on both sides.
Titanium'UDL-50 48"x 25,0' rolls ASTM D226 Wovetl synthetic;polymer underlayment with two
Manufacturing Type.I&II sides coated with UV protected and slip resistant
Location#1. polymer stabilized polypropylene on both.sides..
UDL TT 48"z 250' rolls ASTM,D226 Woven synthetic polymer underlayment with one
Manufacturing Type I&Il side coated with UV protected,and slip resistant
Location.#1 polymer stabilized polypropylene on both sides.
UDL TF 48"x250' rolls ASTM,D226 Woven synthetic polymer.underlayment with two
ManufacturingType I&11 sides coated with UV protected.and slip resistant
Location#1 polymer stabilized.polypropylene,on both sides.
UDL TTMC=300 48"x 250' rolls ASTM D226 Woven synthetic polymer underlayment with two
Manufacturing Type I&lI sides coated with UV protected and slip resistant
Location.#2 polymer stabilized polypropylene on both sides.
RhmoRoof U1.6, 42"x 286"rolls ASTM:D226 Woven syntbetiapo;lymer underlayinent with two
Manufacturing Type I&II sides Boated with'UV protected and slip resistant
Location #3 polymer stabilized polypropylene on both sides..
MIAM
COUNTY- NOA No.:.14-0603.18
`PDADE CO� Expiration Date: 08/08118
Approval Dater 06/11/15
Page 2 o#,,5
I Sf
RhinoRoof U15 42"x 286' rolls ASTM D226 Woven synthetic polymer underlayment with two
Manufacturing Type Iand 11 sides.coated with UV protected and.slip resistant
Location #3 polymer stabilized polypropylene on both sides
RhinoRoof U2U 42"x 286' rolls ASTM D226 Woven synthetic polymer undeilaytnent with two
Manzrfacturing.Location.43 Type:I and II side&coated-with UV protected and slip resistant
polymer stabilized,polypropylene onboth sides,
itanium,UDL25 48"x 250' rolls ASTM D226 Woven synthetic polymer underlayment with two
Ylarnfacturing cation #3 Type I and 11 sidos.coated with UV protected and slip resistant
polymer stabilized polypropylene on both sides.
'RhinoRoof RSA 36"x 67' rolls ASTM D1970 Unreinforced polymer modified bitunieia Material
Manz facturinLocatiota #4 synthetic
to.the underside.of a polymer-coated,
synthetic woven sheet. The,undbfMde is backed
WWI a;release film.
MANUFACTURING LOCATIONS:
1. MLI
2. ML2
3. ML3
4. ML4
EVIDENCE SUBMITTED.
TesfAgency Test 1'dentifier Test Name/Renort Date
IntertekTesting,Services #3031783 TAS 104 02/19/03
3119607COQ-003B ICC-ES AC48 02/2:0/08
3124826-01 ASTM El 08 02%19/08
31.24926MID-007 ASTM El 08 02/25/08
311801000Q-003 ASTM D226 02/20/08
3130639COQ-:002A ASTM D226 02/20/08
3146738COQ-0.03A ASTM D226 06/20/11
3146738QOQ-003B• ASTM 13_1876 TAS,117 .03/28'/08
101465036COQ=001 ASTM D1970 06/27/14
100539395COQ-006 ASTM D226 06/02/14
1018G3MICOQ-001 A ASTM:D22.6 10/28/14
101823107COQ-011 ASTM D226 12/09/14
Trinity ERD 115010.05.1:0 ASTM D.4798/D226 05/1,4/10
138010.08.11 ASTM D226 08/11/11
135520.08.1'1 ASTM D2523/D1781 08/17/11
NOA No:;14-0603.18
MIAMIDADECQUNTY Expiration Date: .08/08/18
Appr6v#1 Date: 06/11%1;5
Page.3:of 5:
INSTALLATION SPECIFICATIONS:
Titanium`s UDL-25 PLUS, Titanium' UDL-30, Titanium' UDL-50, UDL TTMC-300, UDL TT UDL TF.,
RhinoRoof U10, RhinoRoof U-15, RhinoRoof U20, Titanium UDL25, and RhinoRoof RSA Synthetic
Underlayments
1. Titanium®UDL-25 PLUS,Titanium'UDL-30,Titanium®UDL-50,UDL TTMC-300,UDL TT,UDL TF,
RhinoRoof U10,RhinoRoof U 15,RhinoRoof U20,Titanium UDL25,,and RhinoRoof RSA Synthetic
Underlayments shall,be installedin.strict compliance with applicable Building Code.
2. Titaniumo UDL-25 PLUS,TitaniumO UDL-30,TitaniumO UDL-50 UDL TTMC-300,UDL TT,UDL TR,
RhinoRoof U 10,RhinoRoof U 15,RhinoRoof U2,0,Titanium UDL25,and RhinoRoof RSA Synthetic
Underlayments shall be installed with a minimum 4-inch head lap in a shingle layer fashion.
3. Titanium'UDL-25;PLUS,'Titanium'UDL-301 Titanium'UDL-50,;UDL TTMC-3':00,UDL TT UDL TF,
RhinoRoof U10,.Rl inoRoof U 15,RliinoRoof U20,and Titanlum;UDL25 Sy nthedc'Underlayrnents shall be.
fastened with Miami-Dade approved corrosion resistant tin-caps and 12 gauge f '/4"'annular ring-shank nails,
spaced 6"o.c.at all laps and three staggered rows fastened 12"ox. in the field of the roll.
4. Titanium'UDL-25 PLUS,Titanium'UDL-30;Titanium'UDL-50,UDL TTMC-300,UDL TT,UDL TF,
RhinoRoof U10,RhinoRoof U15,RhinoRoof U20,Titanium UDL25,and RhinoRoof RSA Synthetic
Underlayments may be. used with Asphaltic shingles,.Wood shakes and shingles,Non-structural"metal roofing,
and,qua►Sy slate.T taniurno UDL-30,Titaniume UDL-50,UDLTTMC-30.0,UDL TT,UDL TF,RhinoRoof
U10,RhinoRoofU15,RhinoRoofU20;Titanium UDL25 and RhinoRoofRSA Synthetic Underlaymentsshall
not be:used as roof tile,underlayments:
5. For Roof Tile applications.;Titanium®UDL=25,PLUS maybe used as an anchor sheet in roof'tile,applications
when used in combination with a top membrane layer,consisting of a Miami=Dade approved TAS 103 self-
adhering underlayment.(See current NOA listing of approved TAS 1.03 self-adhering underlayment for
installation guidelines and limitations of use),
6. For fire classification of specific roof assemblies using Titanium® UDL-25 PLUS, Titanium' UDL-3.0,
Titaniumo UDL-50,UDL TTMC-300,UDL TT,UDL TF,RhinoRoof U1.0,RliinoRoof U15,RhinoRoof U20,
Titanium UDL25, and RhinoRoof RSA Synthetic Underlayrnents_refer to a current Approved Roofing
Materials Directory for fire ratings of this product.
BUILDING PERMIT REQUIREMENTS:
Application for,building permit shall be accompanied by copies of the following:
1. This Notice.of Acceptance.
2. Any :other documents required by the Building Official or -applicable. building code in morder to properly
evaluate the installation of this material.
NOA Not 14=0603.18
MIAMI-DADS COUNTY Expiration Date: 08108/1;8
Approval Date: 06/11/15
Page 4 of;5
DMITATIONS:
1. Fireclassification is not part of this acceptance;:refer to a current Approved Roofing MaterialsDi.rectoiy for
fire ratings of this product.
2. This acceptance is:for prepared.roofing applications. Minimum deck requirements:shall be in cotiipliance,with
applicable building code.
3.. T.;itanium0 UDL 25 :PLUS, Titanium0-UDL-30,,Titanium'- UDL-50;:UDL TTMC-300, UDL TT, UDL TF;
RhinoRoof U10, RhinoRoof U15, RhinoRoof U20, Titanium UD.L25, and RhinoRoof RSA Synthetic
Underlayments shall be applied to.a smooth,.clean and dry surface with deck-free of irregularities.All nails;n
the deck shall be carefully checked for protruding Beads. Re=fasten any Goose decking panels. Sweep the deck
thoroughly to remove any dust and debris prior to application.
4. Titanium® UDL-25 PLUS, Titanium" UDL-30, Titaniumo UDL-50, UDL TTMC-300, UDL TT, UDL TF,
RhinoRoof U10, RhinoRoof U15, RhinoRoof U20, Titanium UDL25, and RhinoRoof RSA Synthetic
Underlayinents,shall not:be hot mopped,refer to manufacturer's published literature for product.coinpatibility.
S. Titanium® UDL-25 PLUS, Titariuiril_UDL-3:0, Titanium® UDI-50, UDL:`TT IvIC-300, UDL TT, UDL TF;
RhinoRoof U10, RhinoRoof U15, RhinoRoof U20, Titanium UDL25, and RhinoRoof RSA Synthetic
Und'erlayments.shall norbe:appl:ied:over an existing roof membrane.as a,recover system,.
6: Titanium® UDL-25 PLUS, Titani'UMV UDL-30,. Titanium'0 UDL-50, UDL.TTMC-3.00, UDL TT, UDL TF,
RhinoRoof U10, .RhinoRoof U15 RhinoRoof U20, Titanium UDL25, and RhinoRoof RSA Synthetic
Underlayments shall not be left exposed as:a temporary roof for longer than 30 days of application.
7. UDL_TTMC-300 Synthetic'Underlayment shall'not'be left exposed.as a temporary roof for longer-than.180
days of application.
8. Titanium®.UDL-25 PLUS,.Titanium' UDL-30; Titaniume UDL-50, UDL TTMC-300, UDL TT, UDL TF,
RhinoRoof:'-U10, RhinoRoof U1.5, RhinoRoof U20, Titanium. UDL25.,, and RhinoRoof RSA Synthetic
Underlayments are,components used in roof system assemblies.-Roof system assembiies:are approved under a
specific Notice.of Acceptance, Refer to Prepared Roofing.system.Product Control Notice of Acceptance,for
listed approval of this product with specific prepared roofing products.
9. Titanium' UDL-25 PLUS, Titanium® UDL-30, Titanium® 'UDL-50, UDL TTMC-300, UDL TT, UDL TF,
RhinoRoof U10, RhinoRoof U15, RhinoRoof U20, Titanium; UDL25, and RhinoRoof RSA Synthetic
Underlayments may be used with any approved roof covering Notice ofF.cceptance Iisting`TitaniuniO UDL-25
PLUS, Titanium' UDL-30; Titanium®UDL-50, UDL_ TTMGM 300, .UDL TT, UDL TF, RhinoRoof U1.0,
RhinoRoof U-15, RhinoRoof'U20, Titanium,UDL25, and .RhinoRoof RSA Syntlietie Underlayrn6fits, as a
component part of an assembly in the Notice of Acceptance. If Titanium°UDL-25 PLUS, Titaniumi°UDL-
30, Titanium' UDL-50, UDL TTMC=300, UDL TT, UDL TF, RhinoRoof U10, RhinoRoof U15, RhinoRoof
U20, Titanium UDL25, and RhinoRoof RSA Synthetic Underlayments are not listed, a request may be made
to the. Authority Having Jurisdiction (AHJ) or the Miami-Dade. County Product Control Department for
approval provided that appropriate documentation is. provided to detail' compatibility of the products, wind
uplift resistance,and fire testing.results.
10. A11,membranes of packaging.shall bear the imprint or identifiab,l'e%marking of the manufacturer's-name.or logo
and, the following.statement: "Miami-Dade County Product .Control. Approved" or.the Miami=Dade County
Product Control Seal as shown below.
MIAMMADE COUNTY
1;1. All.products.listed herein shall have a quality.assurance audit in accordance with the Florida Building Code
.and.Rule 61020-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
MIAMI - NOA No '14=0603,18
Expiration Date:•.08/08/1$.
Approval Date::.66/11/15
Page 5,of,.5