HomeMy WebLinkAboutProduct Approval Florida Building Code Online Page 1 of 2
�/`/�iil/G�r-✓'
KWO A,
FI 6r da DepaMl2flt°� BCIS Home I Log In I User Registration I Hot Topics I Submit Surcharge I Stats&Facts I Publications I FBC Staff I BCIS Site Map Links Search
Busines
Prof ssi nalQOUSER:Product Approval
Public User
Regulation
Product Approval Menu>Product or ADplication Search>Application List>Application Detail
a M FL# FL10674-R11
qis" Application Type Revision
Code Version 2014 OP�'l
Application Status Approved
L E
Comments
Archived ❑
Product Manufacturer Owens Corning
Address/Phone/Email One Owens Corning Parkway
Toledo,OH 43659
(740)404-7829
greg.keeler@owenscorning.com
Authorized Signature Greg Keeler
greg.keeler@owenscorning.com
Technical Representative Mel Sancrant
Address/Phone/Email 1 Owens Corning PKWY
Toledo,OH 43659
(419)376-8360
mel.sancrant@owenscornig.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Asphalt Shingles
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
❑ Evaluation Report- Hardcopy Received
Florida Engineer or Architect Name who Robert J.M. Nieminen
developed the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 08/20/2017
Validated By John W. Knezevich, PE
O Validation Checklist-Hardcopy Received
Certificate of Independence FL10674 R11 COI 2015 01 COI Nieminen.pdf
Referenced Standard and Year(of Standard) Standard Year
ASTM D3161 2009
ASTM D3462 2009
ASTM D7158 2008
Equivalence of Product Standards
http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtBNbEY5 V%2... 1/20/2016
Florida Building Code Online Page 2 of 2
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 10/15/2015
Date Validated 10/19/2015
Date Pending FBC Approval 10/20/2015
Date Approved 12/15/2015
Summary of Products
FL# IModel,Number or Name IlDescription
10674.1 Owens Corning Asphalt Roofing 3-tab,4-tab, 5-tab,laminated,starter and hip&ridge
Shingles and Starters shingles
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL10674 R11 II 2015 10 FINAL ER OC ASPHALT
Approved for use outside HVHZ:Yes SHINGLES FL10674-Rll.pdf
Impact Resistant: N/A Verified By: Robert J. M. Nieminen PE-59166
Design Pressure: N/A Created by Independent Third Party:Yes
Other: Refer to ER,Section 5. Evaluation Reports
FL10674 R11 AE 2015 10 FINAL ER OC ASPHALT
SHINGLES FL10674-Rll.pdf
Created by Independent Third Party: Yes
Back Next
Contact Us::1940 North Monroe Street,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Copyright 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not
send electronic mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.
'Pursuant to Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department
with anemail address if they have one.The emails provided may be used for official communication with the licensee.However email addresses are public
record.If you do not wish to supply a personal address,please provide the Department with an email address which can be made available to the public.
To determine if you are a licensee under Chapter 455,F.S.,please click here.
Product Approval Accepts:
® ECheck -ate
sccuritvmvnuc5
http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtBNbEY5 V%2... 1/20/2016
EXTERIOR RESEARCH&DESIGN,LLC.
Certificate of Authorization#9503
TRINIT Y I 353 CHRISTIAN STREET,UNIT
QOERD OXFORD,CT 06478478
PHONE:(203)262-9245
FAX:(203)262-9243
EVALUATION REPORT
Owens Corning Evaluation Report 037940.02.12-116
One Owens Corning Parkway FL10674-R11
Toledo,OH 43659 Date of Issuance:02/06/2012
Revision 6: 10/15/2015
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida.The documentation submitted has been reviewed by Robert Nieminen, P.E.for
use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products described
herein have been evaluated for compliance with the 5th Edition(2014)Florida Building Code sections noted herein.
DESCRIPTION: Owens Corning Asphalt Roof Shingles
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product changes or the
referenced Quality Assurance documentation changes. Trinity)ERD requires a complete review of this Evaluation Report
relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "TrinitylERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 7.
Prepared by: ut�ttnttt,,, —
d2:�o-5p1''SS�•�i i
ar
Robert J.M. Nieminen P.E. The facsimile seal appearing was authorized by Robert Nieminen,
P.E.on 10/15/2015.This does not serve as an electronically signed
Florida Registration No.59166,Florida DCA ANE1983 document.Signed,sealed hardcoples have been transmitted to the
Product Approval Administrator and to the named client
CERTIFICATION OF INDEPENDENCE:
1. Trinity I ERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. Trinity l ERD is not owned,operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen,P.E.does not have nor will acquire,a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way,the Designer of Record for any
project on which this Evaluation Report,or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
��TRINITYIERD
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub-Category: Asphalt Shingles
Compliance Statement: Owens Corning Asphalt Roof Shingles, as produced by Owens Corning, have demonstrated
compliance with the following sections of the Florida Building Code and Florida Building Code, Residential Volume
through testing in accordance with the following Standards. Compliance is subject to the Installation Requirements
and Limitations/Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1507.2.5,R905.2.4 Physical Properties ASTM D3462 2009
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D3161 2009
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D7158 2008
3. REFERENCES:
inti Examination Reference Date
UL LLC(CER9626) Physicals&Wind Resistance File R2453,Vol.3 02/15/2007
UL LLC(CER9626) Physicals&Wind Resistance 20120516-112453 05/16/2012
UL LLC(TST9628) Physical Properties 06CA20263 04/18/2006
UL LLC(TST9628) Wind Resistance 11CA34308 02/18/2012
UL LLC(TST9628) Physicals&Wind Resistance 4786093137 02/01/2014
UL LLC(TST9628) Wind Resistance 4786126532 02/10/2014
UL LLC(TST9628) Physical Properties Classification letter 02/13/2014
UL LLC(TST9628) Physical Properties Classification letter 10/02/2015
Miami-Dade(CER1592) FBC HVHZ Compliance Various NOAs Various
UL LLC (QUA9625) Quality Control Service Confirmation,R2453 Exp.08/20/2017
4. PRODUCT DESCRIPTION:
4.1 Asphalt Shingles:
4.1.1 Classic and Supreme®are fiberglass reinforced,3-tab asphalt roof shingles.
4.1.2 Berkshire®are fiberglass reinforced,4-tab asphalt roof shingles.
4.1.3 Devonshire'"are fiberglass reinforced,5-tab asphalt roof shingles.
4.1.4 Duration®, TruDefinition® Duration®, Duration' Premium Cool, TruDefinition® Duration® Designer Color
Collection,TruDefinition®Oakridge®,Oakridge®and WeatherGuard®HP are fiberglass reinforced, laminated
asphalt roof shingles.
4.2 Berkshire® Hip & Ridge Shingles, High Ridge, Hip & Ridge with Sealant, WeatherGuard® HP Hip & Ridge
Shingles, ProEdge Hip&Ridge Shingles and DuraRidge'" Hip&Ridge Shingles are fiberglass reinforced, hip
and ridge asphalt roof shingles.
4.3 Starter Strip Shingle,Starter Strip Plus and Starter Shingle Roll are starter strips for asphalt roof shingles.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity)ERD nor Robert Nieminen, P.E. are, in any way, the
Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was
used for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in the HVHZ.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials
Directory for fire ratings of this product.
Exterior Research and Design,I.I.C. Evaluation Report 037940.02.12-R6
Certificate of Authorization 119503 FL10674-R11
Revision 6:10/15/2015
Page 2 of 7
V
TRINITY I ER®
5.4 Wind Classification:
5.4.1 All Owens Corning shingles noted herein are Classified in accordance with FBC Tables 1507.2.7.1 and
R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158,Class H,indicating the shingles are acceptable for
us in all wind zones up to Vasd=150 mph (V„it=194 mph). Refer to Section 6 for installation requirements
to meet this wind rating.
5.4.2 All Owens Corning hip & ridge shingles, Starter Strip Shingle and Starter Strip Plus noted herein are
Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F, indicating the
shingles are acceptable for us in all wind zones up to Vasd = 150 mph (V„it= 194 mph). Refer to Section 6
for installation requirements to meet this wind rating.
5.4.3 Classification by ASTM D7158 applies to exposure category B or C and a building height of 60 feet or less.
Calculations by a qualified design professional are required for conditions outside these limitations.
Contact the shingle manufacturer for data specific to each shingle.
5.4.4 Refer to Owens Corning published information on wind resistance and installation limitations.
5.5 All products in the roof assembly shall have quality assurance audit in accordance with the Florida Building
Code and F.A.C.Rule 61G20-3.
6. INSTALLATION:
6.1 Underlayment:
6.1.1 Underlayment shall be acceptable to Owens Corning and shall hold current Florida Statewide Product
Approval,or be Locally Approved per Rule 61G20-3,per FBC Sections 1507.2.3,1507.2.4 or R905.2.3.
6.2 Asphalt Shingles:
6.2.1 Installation of asphalt shingles shall comply with the manufacturer's current published instructions, using
minimum four (4) nails per shingle in accordance with FBC Sections 1507.2 or R905.2, with the following
exceptions:
➢ Berkshire®shingles require minimum five(5)nails per shingle.
➢ WeatherGuard®HP shingles require minimum six(6)nails per shingle.
➢ Devonshire'"shingles require minimum six(6)nails per shingle.
➢ Starter Strip Shingle and Starter Strip Plus require minimum five(5)nails per strip.
Refer to Owens Corning published information on wind resistance and installation limitations.
6.2.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.2.4 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening are
required. Contact the shingle manufacturer for details.
6.2.5 Minimum Nailing—Starter Strip Shingle and Starter Strip Plus:
Felt underlayment Deck Feltunderlayment Deck Self adhered
Weatheklivm
Self-adhered undadaymem
WeatherLocke
underlayment
Drip edge
edge Drip edge ed e
D
Nails located Nags located
2'�'from eave
21-3'from eave
Install first Self-sealing adhesive SettaeaDng adhesive
InstelfestStarter Std PWs
Starter Strip positioned along cave p posit oned long cave
shingle with ''•.. \ with 6'removed •� .
6"removed `
Starter Strip shingle overhangs eaves and rakes r/:'4• Starter5trip Plus overhangs eaves and rakes 1/4'4/4'
Exterior Research and Design,I.I.C. Evaluation Report 037940.02.12-116
Certificate of Authorization 119503 FL10674-R11
Revision 6:10/15/2015
Page 3 of 7
TRINITY I ERD
6.2.6 Minimum Nailing—Classic®&Supreme:
Normal Mansard or Area para Normal Mansard or Area pare
Wind Areas High Wind dezvenesy Wind Areas High Wind desvenes.y
Area pare vientos norrnales Areas vientos fnartes Area pare viontos normales Areas yientoa Martes
IA) �rV r ,z• IB z• �• tiz IA► tz �� 1• z'
51 Exposure 6 518'Exposure
Exposiei6n Expoai66n
6.2.7 Minimum Nailing—Berkshire®:
Seahnt:strip Seahei strip
La tha de sda r La tirade sOkdor
8Yz•' BYf-. fvf- 8Yf SYf 8. flYf' :BYf
l.
Asphatl^roofing eoement
Cemento de teeho de adifto
6.2.8 Minimum Nailing—Devonshire'"":
47 47
Nails
s r r r r r r
iiw ti• i>!. u•
At
Nails T,1-Spots of Mphah Roof Cement
Exterior Research and Design,LLC. Evaluation Report 037940.02.12-116
Certificate of Authorization 119503 FL10674-R11
Revision 6:10/15/2015
Page 4 of 7
TRINITY I ERD
6.2.9 Minimum Nailing — Duration®, TruDefinition® Duration, Duration® Premium Cool & TruDefinition
Duration®Designer Color Collection:
4 Nap Pattern 6 Na Win ImnSuittatO
Esquema.de 4 davos Pattern aaaanatop of wl oil.
EsgUema Wnneb opadeedes
SumN�aaflefastening area width de 5davos- 20afrpdasenaau:
Area'de lavas SumNaiw a; 9Wsuetbp rbJOW3
.- ... - eeaepa delraale.
SunN390 \' 'WtNaiP
bslero N aieawl hsfmNgp
abawtdlh
.tr Ariad— cbroSe 1" �.� — ` ams
3
sunNa a� it • .�r s ils
5Y""lxposum Nails 5F Exposure .
634 pulp,de exposich�n clavos 5s.4 ping.de erposkon;
59fs"Exposure. ;Nails 53b Exposure
Sa/r puig.de erposk(6n Clavas 5+,5 prilg,de exposldbn
6.2.10 Minimum Nailing—Tru Definition'Oakridge®,Oakridge®:
4;Nafl;Paftem. 6 Nail Pattern
ESquema'con 4 davos Esguerra con'6 davos
r r
5 6Ar Exposure Nam, 5 5/9"kxposule Nabs
ExposlctBndeSS/8pulg. Clava Expgs(cid ade,6U/6pulg. 6ti/Ir0, syre Clavas 6WExposum
Fxposkfcn.Ad 55/8 ping. -Expo*Mn de 55/8 ping.
6.2.11 Minimum Nailing—WeatherGuard®HP:
1' 1 1111'Ybb
It— 2' 7 =sl
Cisme ss 6"qtr i}*d(n
6.3 Hip&Ridge Shingles:
6.3.1 Installation of Berkshire®Hip and Ridge Shingles, High Ridge, Hip&Ridge with Sealant,WeatherGuard®HP
Hip and Ridge Shingles and ProEdge Hip & Ridge Shingles shall comply with the manufacturer's current
published instructions, using four (4) nails per shingle. Installation of DuraRidgel" Hip & Ridge Shingles
shall comply with the manufacturer's current published instructions,using two(2) nails per shingle. Refer
to Owens Corning published information on wind resistance and installation limitations, including the use
of hand-sealing for wind warranties.
Exterior Research and Design,I.I.C. Evaluation Report 037940.02.12-R6
Certificate of Authorization#9503 FL10674-R31
Revision 6:10/15/2015
Page 5 of 7
��TRINrry I ERD
6.3.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R9O5.2.5. Staples are not permitted.
6.3.3 Minimum Nailing—Berkshire®Hip&Ridge and High Ridge:
Fig.1 4 Fig.2
.wema
Direction iopl/1_ea. .SItleN_ew
Nails A "Nails Nails
4
- I I Z. Top Lan6iatetl P' 1
A 1 I 4' I Piece
I
I
I
I
6.3.4 Minimum Nailing—Hip&Ridge with Sealant:
em Fig. `Wnd'Fasteriittg Pattern:
�4:Naits).
rim-'"3hingle=►
nd`Discard :2;,
Excess �►: ��
Sealant ► 7
-Strip T 12:,
'Fasteni.ng 551a 5 'Exposure
Distance
6.3.5. Minimum Nailing—WeatherGuard®HP Hip and Ridge:
Fig.C HipA Ridge Shingle Fastening
Fig.A '4 4 Top view
PlewAtrlg wtrs7
�-Dlnclbn p
A
Nails
A i i Nails Nails
?' 2-
I
A I I I
I I I I
Erzposuna
S' E[POSen3
7Y
Exterior Research and Design,I.I.C. Evaluation Report 037940.02.12-R6
Certificate of Authorization 89503 FL10674-R11
Revision 6:10/15/2015
Page 6 of 7
�TRINITYIERD
6.3.6 Minimum Nailing-ProEdge Hip&Ridge Shingles:
Prevailing Standard
Wind DirectionFastening
Seatlxrlt Strip Pattern
6•Exposure
• �y 1 Sealant
Fasten 7-A 7'h" 6•Exposure
Cover Exposed
Fasteners with
Roof Cement I'�12•�'I
6.3.7 Minimum Nailing—DuraRidge'" Hip&Ridge Shingles:
Note: The drawings below pertain to minimum, as-tested attachment requirements. Refer to Owens
Corning published installation instructions for their minimum requirements.
PrarWiing Wind Dirmcdcn Top View
~Diraaiondsnilantodnmt I V[sra�e I.I
Dirarcan dol vicnto pr•dxni anta
c
ei
y r Owens Corning Slntrlalr • ck-
Maim
�lo"a f I
aor� I I I
B I I I
a ¢
I
P �12ry
7. LABELING: II
7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC
Table 1507.2.7.1/R905.2.6.1.
8. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
9. MANUFACTURING PLANTS:
Contact the named QA entity for information on which plants produce products covered by Florida Rule 9N-3 QA
requirements.
10. QUALITY ASSURANCE ENTITY:
UL LLC—QUA9625;(414)248-6409; karen.buchmann@ul.com
- END OF EVALUATION REPORT-
Exterior
EPORT-Exterior Research and Design,I.I.C. Evaluation Report 037940.02.12-116
Certificate of Authorization 119503 FL10674-R11
Revision 6:10/15/2015
Page 7 of 7
Florida Building Code Online Page 1 of 2
�k M"*�+�"�ro�5r� � ,��*'. a ;:`���4,'�i���'':A k!�,a^`�'A'� � �c'•Yi.����� � ,�fc,' �1 L.
Florida DepartfTt2fltd BCIS Home Log In I User Registration I Hot Topics I Submit Surcharge I Stats&Facts I Publications FBC Staff I BCIS Site Map I Links I search
Busines r<<i,
Professi I ' Product Approval
r' USER:Public User
Regulation
Product Approval Menu>Product or ADDIIcation Search>Application List>Application Detail
w
F a FL# FL16048-R3
Application Type Revision
Code Version 2014
Application Status Approved
Comments
Archived ❑
Product Manufacturer TRI-BUILT Roofing Products
Address/Phone/Email 9050 Louisiana Street
Merrillville,IN 46410
(201)842-2449
david.ruiz@tribuiltmateriaisgroup.com
Authorized Signature David Ruiz
david.ruiz@tribuiltmaterialsgroup.com
Technical Representative David Ruiz
Address/Phone/Email 250 Route 17 North
East Rutherford, NJ 07073
(201)842-2449
david.ruiz@tribuiitmaterialsgroup.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
❑ Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who Robert Nieminen
developed the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 10/16/2017
Validated By John W. Knezevich, PE
C7 Validation Checklist-Hardcopy Received
Certificate of Independence FL16048 R3 COI 2015 01 COI Nieminen.odf
Referenced Standard and Year(of Standard) Standard Year
ASTM D1970 2009
ASTM G155 2005
FRSA/TRI April 2012(04-12) 2012
TAS 103 1995
http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtFPmdYiNDWr... 1/20/2016
Florida Building Code Online Page 2 of 2 r .
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 10/08/2015
Date Validated 10/19/2015
Date Pending FBC Approval 10/21/2015
Date Approved 12/15/2015
Summary of Products
FL# 11lModel,Number or Name IlDescription
16048.1 TRI-BUILT Roof Underlayments Self-adhering, modified bitumen roof underlayments
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16048 R3 II 2015 10 FINAL ER TRI-
Approved for use outside HVHZ:Yes BUILT UNDERLAYMENTS FL16048-R3.Ddf
Impact Resistant: N/A Verified By: Robert Nieminen PE-59166
Design Pressure: +N/A/-45 Created by Independent Third Party:Yes
Other: 1.)The design pressure noted herein pertains to Evaluation Reports
use of foam on tile systems overtop the self-adhering FL16048 R3 AE 2015 10 FINAL ER TRI-
underlayment for one particular application. See ER BUILT UNDERLAYMENTS FL16048-R3.Ddf
Section 5.6 for details. 2.) Refer to ER Section 5 for other Created by Independent Third Party: Yes
Limits of Use.
Back Next
Contact Us::1940 North Monroe Street,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Copyright 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not
send electronic mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.
*Pursuant to Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department
with an email address if they have one.The emails provided may be used for official communication with the licensee.However email addresses are public
record.If you do not wish to supply a personal address,please provide the Department with an email address which can be made available to the public.
To determine If you are a licensee under Chapter 455,F.S.,please click here.
Product Approval Accepts:
® eC_
sttvritv�tlsrutcs•
http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtFPmdYiNDWr... 1/20/2016
w
`'
EXTERIOR RESEARCH&DESIGN, LLC.
Certificate of Authorization#9503
TRINITY I 353 CHRISTIAN STREET,UNIT
QOERD OXFORD,CT 06478478
PHONE.(203)262-9245
FAX:(203)262-9243
EVALUATION REPORT
Allied Building Products Corp. Evaluation Report A42960.10.12-R3
dba TRI-BUILT Roofing Products FL16048-R3
9050 Louisiana Street Date of Issuance:10/25/2012
Merrillville, IN 46410 Revision 3: 10/08/2015
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida.The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The
products described herein have been evaluated for compliance with the 5th Edition (2014) Florida Building Code
sections noted herein.
DESCRIPTION: TRI-BUILT Roof Underlayments
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s)changes,the referenced
Quality Assurance documentation changes,or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product
changes or the referenced Quality Assurance documentation changes. Trinity)ERD requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity IERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 5.
Prepared by:
u_:Ct�SCrS?ISE� �
Robert J.M.Nieminen P.E. ��iiS Wl The facsimile seal appearing was authorized by Robert Nieminen,
S,��u�f.v- to?I P.E.on 10 N g
41Jp„�+�i+ ++ /06/2015.This does not serve as an electronically signed
Florida Registration No.59166,Florida DCA ANE1983 document.signed,sealed hardcopies have been transmitted to the
Product Approval Administrator and to the named client
CERTIFICATION OF INDEPENDENCE:
1. Trinity[ERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. Trinity l ERD is not owned,operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen,P.E.does not have nor will acquire,a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen,P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way,the Designer of Record for any
project on which this Evaluation Report,or previous versions thereof,is/was used for permitting or design guidance unless retained
specifically for that purpose.
QoTsuNITYIERD
ROOFING COMPONENT EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub-Category: Underlayment
Compliance Statement: TRI-BUILT Roof Underlayments, as produced by TRI-BUILT, have demonstrated compliance
with the following sections of the Florida Building Code through testing in accordance with the following Standards.
Compliance is subject to the Installation Requirements and Limitations/Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1507.2.4,1507.2.8,1507.2.9.2, Physical Properties ASTM D1970 2009
1507.4.5.1,1507.5.3,1507.7.3
1504.6 Accelerated Weathering ASTM G155 2005
1507.3.3 Installation Practice FRSA/TRI April 2012(04-12) 2012
1523.6.5.2.1 Physical Properties TAS 103 1995
3. REFERENCES:
Entity Examination Reference Date
ERD(TST6049) Physical Properties 540540.02.13-1 02/19/2013
ERD(TST6049) Physical Properties S40540.11.13 11/19/2013
ERD(TST6049) Physical Properties 540540.03.14 03/26/2014
ERD(TST6049) Physical Properties 544870.04.14-2 04/02/2014
ERD(TST6049) Physical Properties 544870.04.14-3 04/02/2014
ERD(TST6049) Physical Properties 544870.04.14-1 04/10/2014
ERD(TST6049) Physical Properties S44870.04.14-4 04/10/2014
ERD(TST6049) Physical Properties S43530.02.14-1-R1 05/14/2014
ERD(TST6049) Physical Properties 543530.05.14 05/28/2014
ERD(TST6049) Physical Properties 540540.10.14 10/31/2014
ERD(TST6049) Physical Properties SC7645.02.15 02/13/2015
ERD(TST6049) Accelerated Weathering SC8520.04.15 05/27/2015
UL,LLC.(QUA9625) Quality Control Multiple-Listing R16814 09/04/2015
UL,LLC.(QUA9625) Quality Control Service Confirmation Exp.10/16/2017
4. PRODUCT DESCRIPTION:
4.1 Self-Adhering Underlayments:
4.1.1 Tri-Built Sand-R SA Shingle Underlayment is a self-adhering, glass-mat reinforced, sand-surfaced, SBS
modified bitumen roof underlayment,with a 36-inch sheet width.
4.1.2 Tri-Built S/A HT TU Underlayment is a self-adhering, non-woven polyester fabric surfaced, SBS modified
bitumen roof underlayment
4.1.3 Tri-Built Smooth HT S/A Underlayment is a self-adhering,glass-mat reinforced,film-surfaced,SBS modified
bitumen roof underlayment.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way, the
Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was
used for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in the HVHZ.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials
Directory for fire ratings of this product.
Exterior Research and Design,I.I.C. Evaluation Report A42960.10.12-113
Certificate of Authorization 119503 FL16048-R3
Revision 3:10/08/2015
Page 2 of 5
F)o
TRINITY I ERD
5.4 TRI-BUILT Roof Underlayments may be used with any prepared roof cover where the product is specifically
referenced within FBC approval documents. If not listed, a request may be made to the AHJ for approval
based on this evaluation combined with supporting data for the prepared roof covering.
5.5 Allowable roof covers applied atop the underlayments are as follows:
TABLE 1: ROOF COVER OPTIONS
Underlayment Asphalt Nail-On Tile Foam-On Tile Metal Wood Shakes Slate
Shingles &Shingles
Tri-Built Sand-R SA Shingle Yes No No No Yes Yes
Underlayment
Tri-Built S/A HT TU Yes
Yes Yes Yes Yes Yes
Underlayment See 5.5.1
Tri-Built Smooth HT S/A Yes No No Yes Yes Yes
Underlayment
5.5.1 "Foam-On Tile" is limited to use of the following Approved tile adhesives unless tensile adhesion / long
term aging data from an accredited testing laboratory is provided.
➢ Tri-Built S/A HT TU Underlayment with 3M`2-Component Roof Tile Adhesive AH-160(FL6332)or Dow
TileBond'" Roof Tile Adhesive(FL717)
5.6 Allowable substrates are noted below:
5.6.1 Direct-Bond to Deck:
Tri-Built Sand-R SA Shingle Underlayment, Tri-Built S/A HT TU Underlayment or Tri-Built Smooth HT S/A
Underlayment applied to:
➢ Plywood; ASTM D41 primed plywood; OSB; ASTM D41 primed OSB; ASTM D41 primed structural
concrete.
While not required over plywood,OSB or Southern Yellow Pine substrates,TRI-BUILT recommends priming
the deck if the final roof cover is not slated for installation within 24 hours. Note: TRI-BUILT requires
tongue-and-groove board decking be covered with plywood or OSB prior to installation of the self-
adhering underlayment.
5.6.2 Bond-to-Insulation:
Tri-Built S/A HT TU Underlayment applied to:
➢ Dens Deck Prime;SECUROCK Gypsum-Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per
minimum requirements of the prepared roof covering manufacturer's Product Approval. For installations
under foam-on tile systems,insulation attachment shall be designed by a qualified design professional and
installed based on testing of the insulation/underlayment system in accordance with FM 4474,Appendix D
or TAS 114,Appendix J.
5.6.3 Bond to Mechanically Attached Base Laver:
➢ ASTM D226,Type I or II felt.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per
minimum codified requirements. For installations under foam-on tile systems,base layer shall be attached
per minimum requirements of FRSA/TRI April 2012(04-12).
Exterior Research and Design,I.I.C. Evaluation Report A42960.10.12-113
Certificate ofAuthorization#9503 FL16048-R3
Revision 3:10/08/2015
Page 3 of 5
F)o
TRINIW I ERS
5.6.4 Wind Resistance for Underlayment Systems in Foam-On Tile Applications: FRSA/TRI April 2012 (04-12)
does not address wind uplift resistance of all underlayment systems beneath foam-on tile systems, where
the underlayment forms part of the load-path. The following wind uplift limitations apply to direct-deck
underlayment systems that are not addressed in FRSA/TRI April 2012(04-12)and are used in foam-on tile
applications. Maximum Design Pressure is the result of testing for wind load resistance based on
allowable wind loads, and reflects the ultimate passing pressure divided by 2 (the 2 to 1 margin of safety
per FBC 1504.9 has already been applied). Refer to FBC 1609 for determination of design wind pressures.
5.6.4.1 Maximum Design Pressure=-45.0 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Primer: (Optional)ASTM D41
Underlayment: Tri-Built S/A HTTU Underlayment,self-adhered.
5.7 Exposure Limitations:
5.7.1 Tri-Built Sand-R SA Shingle Underlayment or Tri-Built Smooth HT S/A Underlayment shall not be left
exposed for longer than 30-days after installation
5.7.2 Tri-Built S/A HT TU Underlayment shall not be left exposed for longer than 180-days after installation.
6. INSTALLATION:
6.1 TRI-BUILT Roof Underlayments shall be installed in accordance with TRI-BUILT published installation
requirements subject to the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re-fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly
to remove any dust and debris prior to application,and prime the substrate(if applicable).
6.3 Tri-Built Sand-R SA Shingle Underlayment,Tri-Built S/A HT TU Underlayment or Tri-Built Smooth HT S/A
Underlayment:
6.3.1 Shall be installed in compliance with the requirements for ASTM D1970 underlayment in FBC Sections
1507 for the type of prepared roof covering to be installed.
6.3.2 Non-Tile applications:
While priming is optional,TRI-BUILT recommends priming the deck if the final roof cover is not slated for
installation within 24 hours.
Apply sheet parallel to the roof edge. Roll out approximately 10 ft of membrane and peel back the first 3
ft of release film.
Adhere the exposed part to the substrate and unroll the remaining membrane as far as possible.
Once the entire length of membrane is in place, peel-off the release film diagonally while holding the
membrane tight. Firmly roll the membrane into place to achieve a bond.
Horizontal seams should be minimum 3-inches, configured to shed water. Vertical seams should be 6-
inches and staggered not less than 2-ft from vertical seams in the course below. All over-granule end-laps
shall be sealed using either heat-welding or hot air welding techniques.
When installing at slopes above 8:12, Allied Building Products Corp recommends back-nailing in the
overlap area at the top of the sheet at 12-inch o.c.
For Valleys and Ridges: Cut underlayment into 4 to 6 foot lengths.Peel the release paper and center sheet
over valley or ridge. Drape and press sheet into place, working from the center of the valley or ridge in
each direction. For valleys,apply the sheet starting at the lowest point and work upward.
6.3.3 Tile Applications(Tri-Built S/A HT TU Underlayment only):
Reference is made to FRSA/TRI April 2012 (04-12) Installation Manual and Table 1 herein, using the
instructions noted above as a guideline.
Tile shall be loaded and staged in a manner that prevents the slippage and/or damage to the
underlayment.
Exterior Research and Design,U.C. Evaluation Report A42960.10.12-113
Certificate of Authorization#9503 FL16048-113
Revision 3:10/08/2015
Page 4 of 5
' a
TRINITY I ER®
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
8. MANUFACTURING PLANTS:
Contact the noted QA agency for information on product locations covered for F.A.C.Rule 9N-3 QA requirements.
9. QUALITY ASSURANCE ENTITY:
UL, LLC—QUA9625;(314)578-3406;k.chancellor@us.ul.com
-END OF EVALUATION REPORT-
Exterior Research and Design,I.I.C. Evaluation Report A42960.10.12-R3
Certificate of Authorization#9503 FL16048-113
Revision 3:10/08/2015
Page 5 of 5
Florida Building Code Online Page 1 of 2
3 �I
a • p 6 R & � «fl
Honda Depirtme tt! BCIS Home Log In . User Registration Hot Topics ; Submit Surcharge Stats&Facts Publications FBC Staff BCIS Site Links Search
Busines -3 _ W �
Product Approval
Professi all USER:Public Per )�
Regulation
Product Approval Menu>Product or Application Search>Application List>Application Detail
FL FL12570-114
Application Type Affirmation
Code Version 2014
Application Status Validated
Comments
Archived
Product Manufacturer Sun-Tek Mfg
Address/Phone/Email 10303 General Or
Orlando, FL 32824
(407)859-2117
jfeudner@sun-tek.com
Authorized Signature James Feudner
engineering@sun-tek.com
Technical Representative James Feudner
Address/Phone/Email 10303 General Or
Orlando, FL 32824
engineering@sun-tek.com
Quality Assurance Representative James Feudner
Address/Phone/Email 10303 General Or
Orlando, FL 32824
(407)859-2117 Ext 111
engineering@sun-tek.com
Category Sky Lights
Subcategory Skylight
Compliance Method Certification Mark or Listing
Certification Agency National Accreditation&Management Institute
Validated By National Accreditation&Management Institute
Referenced Standard and Year(of Standard) Standard Year
TAS 201 1994
TAS 202 1994
TAS 203 1994
Equivalence of Product Standards
Certified By
MI affirm that there are no changes in the new Florida
Building Code which affect my product(s)and my product(s)
are in compliance with the new Florida Building Code.
Documentation from approved Evaluation or Validation Entity OYes ONo (%N/A
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgvG4Aty8UaH... 1/20/2016
Florida Building Code Online Page 2 of 2
FL12570 R4 COC 5 27 2015 CMA-DHSFMD-CMA 2014 FBC
letter SS(2).Ddf
Product Approval Method Method 1 Option A
Date Submitted 05/27/2015
Date Validated 05/27/2015
Summary of Products
FL# Model,Number or Name Description
12570.1 CMA-D curb mounted polycarbonate bubble with welded aluminum
ring
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL12570 R4 C CAC CMAD 11-30-17 N1011086-R1.Ddf
Approved for use outside HVHZ: Yes Quality Assurance Contract Expiration Date
Impact Resistant:Yes 11/30/2017
Design Pressure:+60/-60 Installation Instructions
Other: FI-12570 R4 It CMAD signinstalls 5-8-14,ndf
Verified By:James D.Wells Jr. P.E.P.E.#53616
Created by Independent Third Party:Yes
Evaluation Reports
FL12570 R4 AE PRODEVALCMAD5-8-14.pdf
Created by Independent Third Party:Yes
12570.2 HSF Self Flashing aluminum frame with polycarbonate bubble.
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL12570 R4 C CAC HSF 11-30-17 NI011087-Rl.Ddf
Approved for use outside HVHZ: Yes Quality Assurance Contract Expiration Date
Impact Resistant:Yes 11/30/2017
Design Pressure: +60/-60 Installation Instructions
Other: max size,r.o.46.5 x 46.5 FL12S70 R4 11 HSF instal 2014 03 19 sinaed.pdf
Verified By: James D.Wells Jr.P.E.P.E.#53616
Created by Independent Third Party:Yes
Evaluation Reports
FL1.2570 R4 AE PROD EVALHSFS-8-14.Ddf
Created by Independent Third Party:Yes
12570.3 MD-CMA Curb mounted polycarbonate bubble with welded aluminum
ring.
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL12570 R4 C CAC MDCMA 1-31-17 NI011790(2)xdf
Approved for use outside HVHZ: Yes Quality Assurance Contract Expiration Date
Impact Resistant:Yes 01/31/2017
Design Pressure: +60/-60 Installation Instructions
Other: max size 22.5 x 46.5 FL12570 R4 It MDCMA sioninstalls 5-8-14.pdf
Verified By:James D.Wells Jr.P.E.P.E.#53616
Created by Independent Third Party:Yes
Evaluation Reports
FL12570 R4 AE PROD FVALMDCMA5-8-14.ndf
Created by Independent Third Party:Yes
Back Next
Contact Us::1940 North Monroe Street,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Coovricht 2007-2013 State of Florida.::Privacy Statement::Accessibility State_me_nt::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send
electronic mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.-Pursuant to
Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if
they have one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to
supply a personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under
Chapter 455,F.S.,please click tyre_.
Product Approval Accepts:
W-4 ON ,C_F.[ti E
,ecurit stsr:rnit.5
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgvG4Aty 8UaH... 1/20/2016
Sun-Tek Manufacturing,Inc. INSTALLATION INSTRUCTIONS
General Drive MODEPOLYDOME SERIES
U� HSF
10303 n-Toil; Orlando,FL 32824 L
0 407/859-2117
S K YL.1 G H T S www.Sun-Tek.com
Customer5ervice@Sun-Tek.cam = _
AZI
p pME
Fastener Schedule
Frame to Deco to
Deck Frame Engineer of Record:
48x1" P6x34"Hex
Pan Head Head Self James Wells,Jr.,P.E.
Finished Professional Engineer
Opening Fitson Screws Drillin9Screws No.53616
Size Roof (Drywall Center Long Short Long Short r
Code Opening Dimension) Spacing Side Side Side Side J&Ll4e.ls Consulting LLC
1453 Arbitus Circle
1430 14Y?x 301/2" 13'k"x 29'1/2" 16" Oviedo,FL 32765
(407)496-5489
1446 14!,2"x 461-2" 131@"x 451 ' 16" Certificate of
Authorization No.27162
2222 221/2"x 221/2" 211/2"x 21'16' 24" 5 5 5 5
You will need:
2230 22b2"x 301;2' 21'-2"x 2T,2" 24" hammer sealant/mastic
2236 22'/1/'x 361.'x' 21 I."s"x 35: 24" keyhole saw tape measure
skill saw chalkline or straight edge
2246 22?%2"x 46?i" 21?z"x 45 24" 8 S 8 5 nails trowel or Caulk gun
3030 301/2"x 301,1/" 291/2'x 291,6" 16"or 32" drill utility knife
2 x 4's
3046 301n"x 461/2" 29':2"x 45.2" 16"or 32" B 6 8 6 For Light Tunnel; RECOMMENDED SEALANTS:
3636 36111/2"x 361/" 351/2"x 35'1/2" 16"or 32" 7 7 7 7 8 or 10 penny nails 100om Silicone
plywood or drywall Sealants approved for use on
4646 46'/i"x 461,4" 45b2"x 45'•12" 16",32",48" 8 8 8 B polycarbonate(contact Sun-Tek
STS 1000(Sun-Tek exclusive)Butyl rubber
sealant/caulk
FAILURE TO FOLLOW RECOMMENDED INSTALLATION PROCEDURES MAY VOID WARRANTY
Please read instructions completely before beginning. d �
Deck and roofing felt should already be installed.
Inspect skylight for damage before installing.Peel back
protective plastic to inspect dome.If skylight is damaged,do
not install.Please contact your supplier for information on a �� V
replacement.
2 To properly position skylight between trusses/rafters,locate the \
roof opening from the underside of the decking.Drill holes or
drive nails to mark corners.(If this area is not accessible,locate
the ceiling joists from inside the house,mark and cut opening in
ceiling,then mark roof opening.)
3 Remove shingles 6-8"out from roof opening.
Before cutting.roof opening,check measurements against size
chart.Snap a chalkline from corner to corner,or draw line with a
straightedge,then cut roof opening.
Frame roof opening using 2 x 4's as headers-cut two 2 x 4's to fit `��� SONVIC
the actual distance between trusses/rafters and nail into place. `tea p�`r ' a
r
a)If applicable,cut ceiling opening and build tunnel framing. 53616-
See"Light Tunnel Installation Instructions." 1�=
4
�� STATE OF
5 Shingle up roof to bottom of roof opening.
6 Apply a'/z"wide bead of caulking,set back 1"from the 5
roof opening around the entire opening.Set a second 1/2"
wide bead around the entire opening,set 1"back from
the first bead.Sealant applied too close to the opening
may"ooze"into the opening.Can also use 3"wide x',,s"
thick butyl tape,if compatible,set 1/2"back from opening:
Set skylight over opening.Screw into place through the
pre-drilled holes in the flange with the N8 x 1"phillips pan
head screws provided(See Fastener Schedule).Cover the
head of each screw with sealant.
IMPORTANT:
Bottom flange of skylight
MUST go on top of shingles.
8 Now shingle up sides and across top.Place shingles,as far
in as possible,but be careful not to nail through skylight
flange.
9 .Bottom flange will still be exposed:we recommend
leaving it this way.If you decide to put a"false
shingle"over it,be careful not to nail through skylight
Flange.
10 Interior Finishing:
Run drywall(or other finishing material) up the inside.
face of the skylight curb.Slip the drywall up until it
bumps against the ledge in the top of the curb.
Engineer of Record:
James D.Wells,Jr.,P.E.
Professional Engineer
No.53616
J&L Wells Consulting LLC
r 1453 Arbitus Circle
Oviedo,FL 32765
kA,
t (407)496-5489
•" Certificate of
! u�W Authorization No.27162
k
NO. 53616 �* I -
.k tjujYrs" � �&�
x° w
a«t tc S
Oil
1 r' � t STATE OF i$� I t DA'�. r.. Pa',ra
ii �'`,'�COR%'Ov' '/d���
54.50
—�—4.00
6.75
—m 6.75 Qq
F-- 6.75 0 0
Engineer of Record: _� 6 00 I..— 0.63—PI--1—�
James D.Wells,Jr.,P.E.
Professional Engineer
Na 53616
J&L Wells Consulting LLC
1453 Arbitus Circle
Oviedo,FL 32765 N
(407)496-5489 `—
Certificate of p rp
Authorization No.27162 4 1--
N
� 32 FASTENERS FRAME TO DECK l
to Ililt1
t '
DESIGN PRESSURE RATING N
� +-60 PSF co'
C0 LARGE MISSLE IMPACT RESISTANCE
U*) �o
to
(0f t
32 FASTENERS DECO RING TO FRANE
41 %ev
�. w' t�jc
OUTER DOME.093 POLYCARBONATE ` NO. 53616 ��
(GE LEXAN OR SHEFFIELD HYZOD"GP")
STATE OFAll
NAU
2
1
111
I \—INNERDOME.080 I'
i
(� POLYCARBONATE(GE LEXAN
i OR SHEFFIELD HYZOD"GP")
W o.
ZJ
l� Qo
DESIGN PRESSURE RATING - o
60 PSF LL
ILARGE MISSILE IMPACT RESISTANCE I1
I Z LL
I
1I 20
I
i
548 min penetration L _.v .\
'--ROOF DECK #8 X 1"PHILLIPS PAN HEAD
WA - T
, x
A Engineer of Record:
.r Vis
James D.Wells,Jr.,RE.
Professional Engineer
No.53616
s _ x J B L Wells Consulting LLC
1453 Arbitus Circle
Oviedo,FL 32765
(407)496.5489
Certificate of
' aro Authorization No.27162
x, y
r N 4 '
OF
��� •t- � '" i�: AVID W� ////
CLEANING YOUR SKYLIGHT: �/�j NAI-
CLEANING
Use a mild glass cleaner(such as Glass Plus)and a clean sponge or soft cloth.Fresh paint splashes,glazing compound,etc.may 6e removed before
drying by rubbing lightly with a soft cloth or cotton ball soaked in isopropyl alcohol.
DO NOT use abrasive or highly alkaline cleaners,ammonia,benzene,gasoline,acetone,or carbon tetrachloride,Do not clean skylight in bright sun or
high temperatures.Periodic waxing with a high quality,non-abrasive wax such as Mirror-Glaze will help maintain the good looks of your skylight.
LIGHT TUNNEL INSTALLATION INSTRUCTIONS
For homes with an attic,it is necessary to build a tunnel between skylights and ceiling.The tunnel walls maybe straight,or flared for extra light and
architectural appeal.It's very easy to increase the tunnel size along the length of the ceiling joists.As long as no roof-supporting members are cut,no
special framing is needed.While it is possible to flare the tunnel in all directions,if support members are cut,special framing will be required for structural
support.In this case you must consult a qualified building professional to insure proper and safe results.
1 After roof and ceiling openings [lave been framed, measure distance (at each corner of roof
opening)between rafter/truss and ceiling joist,
2 Using these four measurements,cut 2 x4 lumber for vertical support members(two per comer).
3 In each corner,nail vertical support members into place at right angles to each other.
i l
4 Measure,cut,and nail tunnel walls into place.Suggestions for lining tunnel:
use drywall,tape corners,and paint white using regular or textUfre paint.(Texture paint alone 1
will hide and fill untaped joints,but in time,cracks may appear in corners.)
use prefinished paneling with n101ding in corners. \
line the tunnel with cedar,pine,or a wood to coordinate with your decor.
-for special effects,try painting the tunnel a striking accent color,or use mirrors or wallpaper on
tunnel walls.
5 Caulk the slight gap between the tunnel walls and skylight base.
6 Finish off tunnel at ceiling with molding,or blend edges into ceiling with texture paint.
7 Be sure to wrap the exterior of the tunnel with insulation for energy savings.
POLYDOME SKYLIGHT LIMITED WARRANTY
Sun•Tak Manufacturing,Inc.i".Sun Ter'?10303 General Drive.Orlando,Florida 32624,(407)659.2117,warrants this Skylight on the following terms and conditions:A.Warranty Coverage:This warranty applies to both the original
purchaser and first consumer-owner of a Skylight made by Sun•Tek.B.Warranty Duration:This warranty shall rema!n in effect for a period of five In years on Model SF and ten 001 years on all other Dum-Senes models after the date
the Skylight is purchased or the date the skylight Is delivered to the first consumer-owner,whichever Is later.One III year on electric components.
C.Warranty Application:This warranty applies only to the materials and fabrication.of the Skylight and doesnot apply to any defector damage caused byim proper use,improper installation,impopai care,shipping damage or ac-
cldent.This warranty does not cover any cosmetic changes in skylight,including but not limited to pitting,hazing,paint finish,discoloration:Condensation or damaged caused by condensation is not covered under this warranty. 0.
Performance by Sun-Tek:During the warty period,Sun-Tek will provide free of charge an equivalent new skylight(or component thereof)(or one found robe defective in material or workmanship.Shipping costs of such replace-
mentsore not the responsibility of 5un-Tek.Sun-Tek will not be responsible for any casts of removal at re-Installation.E.Valldation Procedure:To obtain performance under this warranty,the purchaser must:11)on Installed skylights,
contact Sun-Tek for instructions before removing skylight.Removal of skylight from roof before inspection will void warranty.(21 Notify Sun-rek in waiting of any claim within thirty(301 days afte,the defect is discovered;(3)Sun Tek
w Rs-in-Zed agents must examine high gvaley,rstalled phowgrauhs o`the subject skylight and dete,r ne ro ns sa:isOct+on v:hether the-defect-s ca rered by rias we,rainy;and i41 Present a copydf the receipt as proof of purchase.F.
Implied Warranties:IMPLIED WARRANTIES,INCLUDING BUT NOT LR.IITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,SHALL NOT EXTEND BEYOND THE DURATION OFTHE EXPRESS
WARRANTIES PROVIDED HEREIN.Some slates do not allow limitations on how long an Implied warranty lasts,so the above.limitation may not apply ro you.G.Incidental.or Consequential Damages:SUN-TEK SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER,INCLUDING BUT NOT LIMITED TO LOSS OF 1144E OR REVENUE.DAMAGE RESULTING"ro OTHER PROPERTY OR OTHER EXPENSES.some states do not allow the exclusion
of limitation of incidental or consequential daneges,so thealoe•,limitation or exclusion may not apply to you.H.Exclusive Warranty.THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES.This warranty gives you
specific le al ri hts.You may have other riches which var from state to state.
All installation information is supplied in good faith,but without recommendation to its use.No guarantee of the results of any use of this
information is to be implied,since conditions of use are beyond our control.Please consult local building codes for compliance before installing. _