HomeMy WebLinkAboutBuilding Permit Application ALL APPLICABLE INFO MUST BE COMPLETED FOR APPLICATION TO BE ACCEPTED
Date: ,�' 1p Permit Number:L�e
R.E -f��D
Building Permit Application FEB 2 3 2016
Planning and Development Services _
Building and Code Regulation Division St.LPERFAITucie C TING
FLING
,
2300 Virginia Avenue,Fort Pierce Ft 34982
Phone: (772)462-1553 Fax: (772)462-1578 Commercial Residential X
PERMIT APPLICATION FOR: Roof
PROPOSED IMPROVEMENT LOCATION:
Address: 10725 S Ocean Dr Unit 136 Jensen Beach FI 34957
Legal Description: Holiday Out at St Lucie Blk J Lot 5 and equal pro-rata interest in common elements(or 1424-1191;
3625-2228)
Property Tax ID#: 4511-501-0290-000-8 Lot No.5
Site Plan Name: Holiday Out Block No. J
Project Name:
Setbacks Front Back- Right Side: Left Side:
DETAILED DESCRIPTION OF WORK:
Remove existing"shingle.roof and replace with 5V mill finish metal roof.-
CONSTRUCTION INFORMATION:
Additional work toee orme under this permit-check a appy:
E]GasHVAC Tank ❑Gas Piping _Shutters EjWindows/Doors
Electric 1:1 Plumbing Sprinklers 0 Generator R1 Roof
Total Sq. Ft of Construction: 845 S . Ft.of First Floor: 792
Cost of Construction:$ 5375.00 Utilities: Sewer Septic Building Height:
OWNER/LESSEE: ; CONTRACTOR:
Name Kenneth and Andrea Jones Name: Ronald Latta
Address:PO Box 793 Company: Treasure Coast Concepts Inc.
City: Oneonta State:NY Address: 3458 SW Pluto St
Zip Code: 13820 Fax: City: Port Saint Lucie State:FL
Phone No. �p7- 43S- 165� �_z -77Z-rLg7 `fZip Code: 34953 Fax: 772-905-4910
E-Mail: Iii WAWDRE6 @ JG'p,12 a Al , eJF T Phone No. 772-777-8130
Fill in fee simple Title Holder on next page(if different E-Mail: tcconcepts@aol.com
from the Owner listed above) State or County License: CCC1330362
If value of construction 1s:$2500 or more,a RECORDED Notice of Commencement is required.
SUPPLEMENTAL CONSTRUCTION LIEN LAW INFORMATION:
DESIGNER/ENGINEER: x Not Applicable MORTGAGE COMPANY: X Not Applicable
Name: Name:
Address: Address:
City: State: City: State:
Zip: Phone: Zip: Phone:
FEE SIMPLE TITLE HOLDER: X Not Applicable BONDING COMPANY: X Not Applicable
Name: Name:
Address: Address:
City: City:
Zip: Phone: Zip: Phone:
I certify that no work or installation has commenced prior to the issuance of a permit.
St.Lucie County makes no representation that is granting a permit will authorize the permit holder to build the subject structure
which is in conflict with any applicable Home Owners Association rules,bylaws or and covenants that may restrict or prohibit such
structure.Please consult with your Home Owners Association and review your deed for any restrictions which may apply.
In consideration of the granting of this requested permit,I do hereby agree that I will,in all respects,perform the work
in accordance with the approved plans,the Florida Building Codes and St.Lucie County Amendments.
The following building permit applications are exempt from undergoing a full concurrency review:room additions,
accessory structures,swimming pools,fences,walls,signs,screen rooms and accessory uses to another non-residential use
WARNING TO OWNER:Your failure to Record a Notice of Commencement may result in your paying twice for
improvements to your property.A Notice of Commencement must be recorded and posted on the jobsite
before the first inspection. If you intend to obtain financing, consult with lender or an attorney before
commencing work or recording our Notice of Commencement.
s
_Signature of Owner ssee/Agent Signatur4 of C ntra icen a Holder
STATE OF FLORIDA STATE OF FLORIDA
COUNTY OF 4T. Cj z COUNTY OF A.
The fpLLr#oing instrument was acknowledged before me The forgoing instru °t'was acknowledged before me
this.• day of 20 JLby this day of 20 ]to by
XCAbVl k /I KAREN S. NIELSEN
(Name of person acknowledging) (Name of person acknowledi3
&W
'-' My Commission Expires
°` ` June 12, 2018
W. .
(Si ature of Notary Public-State of Florida) (Signature of Notary Public-State of Florida)
Personally Known wboom JTe
onally Known OR Produced Identification I/
Type of Identification Produ d a��'"'o��,, JOAO FICO of Identification Produced �lNotary;Pu01ie-"State Of Flor � rici
Commission No.�r �Zy - ►•_ Mmm,E�pirriaJ�ri2,.2 mission No. SealC� Comission#FF 22947 FEf 9 2016Bonded Through National Notary
Revised 07/15/2014 St. Lucie County, FL
REVIEWS FRONT ZONING SUPERVISOR PLANS VEGETATION SEA TURTLE MANGROVE
COUNTER REVIEW REVIEW REVIEW REVIEW REVIEW REVIEW
DATE
COMPLETE
INITIALS
TRINITY I ER®
4.2.7 11PdVI em SAP, fPdN1111ex SAP FR„ Ului udle SA-APP r-a!p Sheet a!md Wuulle-il•da SA-APP Cap 5heet il�iRw) are polyester
4.2.8 Polystick Dual Pro" is a nominal 60-mil thick dual-layer rubberized asphalt waterproofing membrane, fiberglass
reinforced,with a polyester fabric surface; meets ASTM D1970.
4.2.9 Polystick Tile Pro"' is a nominal 60-mil thick dual-layer rubberized asphalt waterproofing membrane, fiberglass
reinforced,with a polyester fabric surface; meets ASTM D1970 and TAS 103.
4.3 Mechanically Fastened and/or Bonded Underlayments:
4.3.1 Elastoflex S6 G and Elastoflex S6 G FR are polyester reinforced,SBS modified bitumen cap sheets; meet ASTM D6164.
4.3.2 Polyflex G and Polyflex G FR are polyester reinforced,APP modified bitumen cap sheets;meet ASTM D6222.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way, the Designer of
Record for anv project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in the HVHZ.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory for fire
ratings of this product.
5.4 Polyglass Roof Underlayments may be used with any prepared roof cover where the product is specifically referenced
within FBC approval documents. If not listed, a request may be made to the AHJ for approval based on this evaluation
combined with supporting data for the prepared roof covering.
5.5 Allowable Roof Covers:
TAME JL-FEGOF COVER
Sj j Ij Yew Yes i
ii ®ice lyesIf (fp�l6?i^rrlin4pl(5' 1 1114av�riin l ply '.Ys s `YES I 'Yes
i ��mj s�ysFsm) I
' Yes Yes
1 EP.R�P li Yes Yes Yes Yew
IPa116i�4I(Wflf� ; Ye$ Yes; Ism was Yes I Yes
Polystick MTS PLUS Yes Yes No Yes Yes Yes
Polystick IR-Xe Yes No No No Yes Yes
PolystickTU P l Yes Yes Yes No Yes Yes
See 5.5.1
PolystickTU Plus I Yes Yes Yes Yes Yes Yes
See S.S.1
PolystickTU Max No Yes Yes Yes No No
See 5.5.1
PmGystyck Dual Pro Yes Yes No Yes Yes Yes
P®wkk Tde PM i( Yes Yes YES Yes Yes i Yes
EQas�ex Sa G Yes Yes
yes
BID I YES `deg
Elaskoflex S5 G F ; Yes Yes Nb no Yes Yes
i
Pa9fg>ffllexs G li Yes Yes Yes rft Yes
sees.5.11 11
Polyflex G FR Yes Yes No No Yes Yes
Polyflex SAP or SAP FR Yes Yes Yes No Yes Yes
See 5.5.1
Mule H.id.e SA-APP Cap Sheet 1, yes
ar SA-APP Cairn S�a�tt(( ii YESYea I s 5 U 'I'D ! )`_ lyes I
Extermr Reseaaslta and Vesqp,UC. Ev9saffon RepaTt .®L09-R20
Reser 2e�:07f2212015
QoTaINITY�ERD
55-]L `Thorn-am TTI "'is lfimcaecdl to ase tcl-atilt wile}tansile aAha&bn./:[ang term aging
d6Vmtdr r m��rt i( i mr git ry,i3 prr,�rizded.
✓ 3MTm 2-Component Roof Tile Adhesive AH-160 (FL6332): Polystick TU P, Polystick TU Plus, Polystick TU
Elastoflex 56 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR, Mule-Hide SA-APP Cao Sheet or Mule-Hide SA-APP
Cap Sheet(FR) or Tile Pro.
✓ 3MTm Foam Roof Tile Adhesive RTA-1 (FL6276): Polystick TU P, Polystick TU Plus, Polystick TU Max, Elastoflex S6
G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR, Mule-Hide SA-APP Cap Sheet or Mule-Hide SA-APP Cap Sheet(FR)
or Tile Pro
✓ Dow TileBond (FL717): Polystick TU P, Polystick TU Plus, Polyflex SAP or Tile Pro
✓ Convenience Products'Touch 'n Seal StormBond Roof Tile Adhesive (FL14506): Polystick TU Plus, Polystick TU
Max
5.6 Allowable Substrates:
5.6.1 Direct-Bond to Deck:
Polystick(all variations), Dual Pro,Tile Pro, Polyflex SAP or SAP FR, Mule-Hide SA-APP Cap Sheet or SA-APP Cap Sheet
(FR)self-adhered to:
➢ New untreated plywood; ASTM D41 primed new untreated plywood; Existing plywood; ASTM D41 primed existing
plywood; New or existing, unprimed OSB; ASTM D41 primed OSB; Southern Yellow Pine; ASTM D41 primes
Southern Yellow Pine; ASTM D41 primed structural concrete; Huber Engineered Woods "ZIP System" Panels
(designed and installed to meet wind loads for project).
Note: Polyglass does not require priming of new or existing plywood or OSB sheathing. New or existing plywood or
OSB sheathing should be cleaned of all dirt and debris prior to application of Polystick membranes.
Elastoflex S6 G or S6 G FR in hot asphalt to:
➢ ASTM D41 primed structural concrete.
}olvf ex G or G FR torch-applied to:
- ASTM D41 primed structural concrete.
5.6.2 Bond-to-Insulation:
Polystick (all variations), Polyflex SAP or SAP FR, Mule-Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)self-adhered
te•
➢ ASTM C1289, Type II, Class 1 polyisocyanurate or Type V polyisocyanurate-co mposite insulation; Dens Deck
DuraGuard; Dens Deck Prime; or SECUROCK Gypsum-Fiber Roof Board.
Elastoflex S6 G or S6 G FR in hot asphalt to:
➢ Dens Deck Prime or SECUROCK Gypsum-Fiber Roof Board.
Polyflex G or G FR torch-applied to:
➢ ASTM D41 primed structural concrete; Dens Deck Prime or SECUROCK Gypsum-Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per minimum
requirements of the prepared roof covering manufacturer's Product Approval. For installations under foam-on tile
systems, insulation attachment shall be designed by a qualified design professional and installed based on testing of
the insulation/underlayment system in accordance with FBC Section 1504.3.1.
Exterior Research and Design,LLC. Evaluation Report P32060.02.09-R-2.
Certificate of Authorization#9503 FL5259-1124
Revision 20:07/22/2015
Page 5 of 12
Q0TRINITYIERD
.5.6.3 Bond'ttoUechanka(illyAttttadhed BaLsE Lover
PaliVs &((a1,Y1 vairfeffarns)),BrraWlex SAP air SAP F t Mialle-lHiide SA-APP Cap Shy or SA--PID Cap Sheet((FRS Duali pro or
Tite term add-adiheredi to-.
ASTM 0226,.TW.De it or Ilii ffedlt;El -Hasbmlbase P or MAulle4lriiuilz-Kafll Base..
E aEtbmPik m`5 G or S5 6 FIR iim that asofiWIT W::
> ASTIM D226,.Type B or Bl felt-Ellastbalbase;,EBastobase P or Ls elle-Hridle Nail Base.
PcrIVIRex GL arr rG FIR',ttamtlfn-a Vedl tbm
r HastoRbase,Et wase P or MuUe-Hiide NO lyse.
For iinstafilfadu ns under mechanicaBBy attached prepared roof coveriiings, base Bayer shall be attached per minimum
cod requnnrermerntts. For instad?ladans under foam-on file sVstems, base llayer Shaul Bre attached per minimum
regpdrementsb off, FiRSAIMi Apruil 212 P4-12L Appendix k Talblle I,air as Ustted in Secdon 5..6-4 herein„or as tested in
acmvdance a>Y db r9C Section 2%43J.,
5.6_4 llfibiirid Rest m for, iUlnd6r1lait "amt S\rAenois im Fdamn-gym Tik- Ai lrgau -. Fli€W/TI tll A� hI 2912 ((04-72)) ads not
address YAnd uplift resistance of aIT undedayment systems beneath foam-on tide systems,where the undeflayment
forms part of the goad-grata. The ffoBBowng mind up9iift limitatyons apply to undedayment systems that are not
addressed irn FSB A00 2�_,2 P4-112))and are used Fin ffoam-on tbe applrictiiorns. Maxfm.ur rn Des�pressure is the
result of testing for ivind load)resistance(based on allowable vAnd loads,and reflects the ultimate passing pressure
divided by 2(the 2 to 1 margin of safety per FBC 1504.9 has already been applied).Refer to FRSA/TRI April 2012(04-
3-2),Appendix A,Table 3A or FBC 1609 for determination of design wind derails.
5=6.4.1 Maximum Dagen Pressure=-SID .
D'eda Up 1S//32-'rah 04wend ttm m i eE t proji ea requrmrements W stlisffaffon of AHJ.
Primer_ ((Ginti il)IFSIMorAASliitklll1D A
Base FIIV. ( n iU lFizi�"ya ta<[miffs VMS,smw-a�
Underlayment PolysticH,TU P,PoW,,alk TUD Mus PoWick TU Max,Po !ex SAIF Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
MultP-Hidr-SA-APP Cap Sin (FRI,s `g-azd'Jh�rrr l_
5.6-4-2 Nlmdmurrm Desalom Preswre=-135�.
Deck: Min.15/32-inch plywood to meet project requirements to satisilac ion of AHJ.
Primer (Gptibnal)PG1M or;ASAM D41L
iaFamts: IWrL 4-iihdh YAda strips off Ella st glex-I&A-V oveT aTi p lbw in-ants-
Base Ply. (Optional)Pdlyste�l- 'e MIS PILUS,setif-adlheread
Underlayment Polys .TU P,Pad%stkk TU Plus.Polly rk TLD Max,PoWex.SAP,Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
MullKIRde SA�6l1PH8 Cagy Sheet((FR3,sslE-aditnered.
5:6.41.3 Maxdmurn Design Pressure=-325 Hrsff
Derr c Sbmtinuirall mrrmrEte W mEet p Tg5B t regdraTmi nets to satrrsl iff n of AHJ_
PINPGM or/ASTUD4nt
Ease PIV: (foom,ug Irdl%M di<MIT-%R"ILttl$'s Vf a trmr�a!
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max,Tile Pro, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap
Sheet and Mule-Hide SA-APP Cap Sheet(FR),self-adhered.
5.6.4.4 Maximum Design Pressure=-622.5 psf.
Deck: Structural concrete to meet project requirements to satisfaction of AHJ.
Primer: PG100 or ASTM D41
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.5 Maximum Design Pressure=-30.0 psf*.
Deck: Min.15/32-inch OSB to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase or Mule-Hide Nail Base(poly-film top surface)
Fasteners: 11 ga.x 1.25-inch long x 1-inch head diameter round metal cap nails
Spacing: 6-inch o.c.at the 3-inch wide side laps and 6-inch o.c.at two(2)equally spaced staggered center rows.
Base Ply: (Optional)Polystick MTS PLUS,self-adhered
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP,Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet(FR),self-adhered.
Exterior Research and Design,LLC. Evaluation Report P12060.02.09-R20
Certificate ofAuthorization#9503 FL5259-112
Revision 20:07/22/20�-
Page 6 of 12
TRINITY( ERD
5.r6.4E_6 il��lai umuatm�iigm Piresozm=-375 Psf*.
fi2erd�. 1lxiimt.�J%3711ei�fi I�� I ittID mmegit CI>���tt�tuairuairt>i�trots>flID sattisfm�rtirczm uxf;f11-1J.
Rase Sheet E l tohasre or IMylluulle`INI de rlftill Base QgnolNLI!rm top-cut Tfard)
Fastumers_ 1111 ga.x 2254=:h L x IL-inch head dVamueteir mmund heel l cap m2dis
Spate : 64rrmidh o-u=.at the 3-ieiidh w da sin Ilax an. &imzh ox-Qtt ttl=Q2)equa tiY spm. red centar miu-s-
Base Pity. WOOA4 PS yVbdk MVS K�VS,seff-adhWed
Underlayment:Polystick TU P,PolystEcik TU Plus Polystick TU Max,Polyflex SAP,Poloex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule 5de SA-APP Cap Sheet(FR),se9f adbererd-
5-".4.7 Ma)dmmuyrtm®asiigm Pnmstuire=-37-5 pstl.
Deck- Min-19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet= One(1)or two(2)layers ASTM D226,Type If felt
Fasteners: U giL x 125-hmh dung x 1-inch head ammeter mond metili®p nag&
Spacing. 6-inch o.c.at the 3-iindh anus side laps and 12-inch o-c-at twu(2)equallly spaced stammered center rows.
Undredayment EkskAlex SS C,,app lied Fin ffulll n impo ng of hot amplhalit.
5.6-4-8 Mai);Jitimiumrtm Desiigm IPramllnre=-415:ipsg"`..
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: One(1)layer ASTM D226,Type II felt
Fasteners: 11 ga.x 1.25-inch x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 4-inch o.c.at the 2-inch wide side laps and 4-inch o.c.at two(2)equally spaced staggered center rows.
Base Ply: (Optional;for use with self-adhering underlayment only)Polystick MTS PLUS,self-adhered
Underlayment: Polystick TU P,Polystick TU Plus, Polystick TU Max, Polyflex SAP,Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet(FR),self-adhered or Elastoflex S6 G,applied in full mopping of hot asphalt.
5.6.4.9 Maximum Design Pressure=-45 psf*.
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Two(2)layers ASTM D226,Type II felt
Fasteners: 11 ga.x 1.25-inch long x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 9-inch o.c.at the 2-inch wide side laps and 9-inch o.c.at two(2)equally spaced staggered center rows.
Base Ply: (Optional;for use with self-adhering underlayment only)Polystick MTS PLUS,self-adhered
Underlayment: Polystick TU P,Polystick TU Plus, Polystick TU Max, Polyflex SAP,Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet(FR),self-adhered or Elastoflex S6 G,applied in full mopping of hot asphalt.
5.6.4.10 Maximum Design Pressure=-45 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied capj
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 9-inch o.c.at the 2-inch wide side laps and 18-inch o.c.at two(2)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.11 Maximum Design Pressure=-52.5 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: Simplex MARX Cap Fasteners
Spacing: 9-inch o.c.at the 2-inch wide side laps and 12-inch o.c.at two(2)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G;applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.12 Maximum Design Pressure=-52.5 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase or Mule-Hide Nail Base(poly-film top surface)
Fasteners: Simplex Original Cap Nails
Spacing: 6-inch o.c.at the 3-inch wide side laps and 6-inch o.c.at four(4)equally spaced staggered center rows.
Base Ply: (Optional)Polystick MTS PLUS,self-adhered
Underlayment: Polystick TU P,Polystick TU Plus, Polystick TU Max, Polyflex SAP,Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet(FR),self-adhered.
Exterior Research and Design,LLC. Evaluation Report 1312060.02.09-R7
Certificate of Authorization#9503 FL5259-112z
Revision 20:07%22/2015
Page 7 of 12
TRINITY�ER®
5-6-4-13 it�sla<Ain mtirn M�sii-m Fire nre=-52.5 psf.
Iii`: Iraaam.>544smintpNTLIt!mIm BE# je r e r s hti 7 imm f 1t1J.
Base Sheet EtL;asWbaw((sanded top suurfare ffw hut-as phaft or tuTd"ppliiied cap(mr pily4qm surdare fi r tw dtn-W;p9 ed cap)
Fasbeners: .Siimniplk_%GTTVunaul Cap 741au ls
ming 6;�h 0z.at one 3-61' say siida chaps and 64d, 0-c.at ibnur((4))aWd%,spate;~aaggaredi ve-fir irowc
ltUndETUmTnTnnt gla slafff tit Ski(G,appiked iiun SuM t rp[im g of hut as p nak or Pdl•yfllez G,bomb-appfBd.
5.6.4.34 kllaxirraum Desire Pressure=-69 as
De di_ Wim 19 82-in lbl piigwood to mmeet lWoLea ruquuRrenents taa safdaufo n 0f AH1
Base Sllzee: mlast�((sanded tr rtp mffliiaam for Ihxut hafht or ikwdn-appIiiedl ca p mrr pzIVVI,-ru suuae for tea-ap aed cap)
Fasteners: 33 gaa_z 125-ftrdh Ibng xt 3,//84hr In head d 5ameter arnrnatir rriimg sifte nla iron ng nails alt 1-5//FWmv6h diameter tin caps
S{p3dM9__ &hhnd n 0 T_at the 294midb ui dle Ei�lkps and B-iumclh 0_c-aft tilbvree((3))eq"D y slpawmd sired eemitar rssaeis.
t(Ua dleriilapmanTt-FJ ft L-x SE Gs,apofied cam iTmill tnumpyptig a ff Ihaet aspin&er iPdkilitex ctv-,,t>zmndfi a3 pp€ ri.
5.6.4.15 Maximum Design Pressure=-60 psf.
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: OMG#12 Standard Roofgrip with OMG Flat Bottom Metal Plates
Spacing: 12-inch o.c.at the 4-inch wide side laps and 12-inch o.c.at two(2)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.16 Maximum Design Pressure=-90 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-inch o.c.at the 2-inch wide side laps and 6-inch o.c.at two(2)equally spaced staggered center rows.
Underlayment:Elastoflex S6 G,applied in full mapping of hot asphalt or Polyflex G,torch-applied.
5.6.4.17 Maximum Design Pressure=-90 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: OMG#12 Standard Roofgrip or OMG#14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal
Plates
Spacing: 6-inch o.c.at the 4-inch wide side laps and 6-inch o.c.at three(3)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.18 Maximum Design Pressure=-90 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
iase Sheet: Elastobase(sanded top surface)
Fasteners: Trufast#12 DP or Trufast#14 HD with Trufast 3"Metal Insulation Plates
Spacing: 6-inch o.c.at the 4-inch wide side laps and 6-inch o.c.at three(3)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt.
5.6.4.19 Maximum Design Pressure=-97.5 psf.
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase or Mule-Hide Nail Base(poly-film top surface)
Fasteners: 11 ga.x 1.25-inch x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 4-inch o.c.at the 4-inch wide side laps and 4-inch o.c.at four(4)equally spaced staggered center rows.
Base Ply: (Optional)Polystick MTS PLUS,self-adhered
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR,Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet(FR),self-adhered.
5.6.4.20 Maximum Design Pressure=-105 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-inch o.c.at the 2-inch wide side laps and 6-inch o.c.at three(3)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
Exterior Research and Design,LLC. Evaluation Report P12060.02.09-1120
Certificate of Authorization#9503 FL5259-1124
Revision 20:0712212015
Page 8 of 12
QIOTRINITY�ERD
5-6-4= lAc��a�mm;rUu�rm IID�igrt iP��xre=-1 ;psf.
i0tadic: Wimi.1911M-i►mo� of•AtiJ_
Base Shams Ellaisftobase gm Mafie-H ide Nafl Base((tpdV-51m top snrrfare))
Fasteneas: 11I ga.x 2-25-rar¢6n x 3 iimgch head)dFairmtu-r an nus ar Lung sHnank mma iiangg niaTills at diiamEteT tin caps
Sgezi�pg: rm-r"rnr1n D.C.at tdhe h VlWa�§i&Ilam and 6-"uff�c-r-at ifiMUT((4))egura%7 spaned staagmmd centar'rD _
pTiima r PrSIlOD or ASTM QD41 prwneT at aik ps
Base Ply: Poiysfda:lk INM PLODS,seuUadhered
Undeday meat Pck-ttixlk TU P Po9y4sfslk TD Pians,Pa1VsI1kk TU May,Polyflex SAP,Po$fflex SAP FR,Mlute-Hide SAAPP Cap Sheet and
Muile-Him SA Cap Sheet QF%,seff-at -
5.6.4.22 Maximum Design Pressure=-120 osf,
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ..
Base Sheet: Elastobase(sanded top surface for hot-asphalt or torch-applied cap or poly-film surface for torch-applied cap)
Fasteners: OMG#12 Standard Roofgrip or OMG#14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal
Plates
Spacing: 6-inch o.c.at the 4-inch wide side laps and 6-inch o.c.at five(5)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt or Polyflex G,torch-applied.
5.6.4.23 Maximum Design Pressure=-120 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Elastobase(sanded top surface)
Fasteners: Trufast#12 DP or Trufast#14 HD with Trufast 3"Metal Insulation Plates
Spacing: 6-inch o.c.at the 4-inch wide side laps and 6-inch o.c.at five(5)equally spaced staggered center rows.
Underlayment: Elastoflex S6 G,applied in full mopping of hot asphalt.
5.6.4.24 All other direct-deck, adhered Polyglass underlayment systems beneath foam-on tile systems carry a Maximum
Design Pressure of-45 jys..
5.6.4.25 For mechanically attached base sheet in a 2-ply system,the maximum design pressure for the selected assembly sham
meet or exceed the Zone 1 design pressure determined in accordance with FRSA/TRI April 2012 (04-12),Appendix A,
Table 1A or FBC 1609. Zones 2 and 3 shall employ an attachment density designed by a qualified design professional
to resist the elevated pressure criteria. Commonly used methods are RAS 117, FM LPDS 1-29 and ANSI/SPRI WD1.
Assemblies marked with an asterisk* carry the limitations set forth in Section 2.2.1.5.1(a) of FM LPDS 1-29 for Zone
2/3 enhancements.
5.7 Exposure Limitations:
Elastobase or Elastobase P shall not be left exposed for longer than 30-days after installation.
Polystick IR-Xe shall not be left exposed for longer than 90-days after installation.
Polystick MTS, MTS PLUS, TU P, TU Plus, TU Max, Dual Pro or Tile Pro shall not be left exposed for longer than 180-
days after installation.
Polyflex SAP or SAP FR, or Mule-Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) does not have an exposure
limitation, unless the prepared roof covering is to be adhesive-set tile, in which case the maximum exposure is 30
days.
Elastoflex S6 G or S6 G FR or Polyflex G or G FR does not have an exposure limitation, unless the prepared roof
covering is to be adhesive-set tile (Elastoflex S6 G or Polyflex G only), in which case the maximum exposure is 180
days.
exterior Research and Design,LLC. Evaluation Report P12060.02.09-R20
Certificate of Authorization#9503 FL5259-R24
Revision 20:07/22/2015
Page 9 of 12
TRINITY ER®
&.1L flame Roof U4mkillarmoen-Ts s&A be wsr ed un a=dannum wutfh lRdh ifass pa&tel st un mquzrements
snubt l ect to the g11PTi didaihions set forth in Sermon S bereiin and the speniifks noted below..
6.2 Re-flastn n any looms dull ng pa!rnells,and sihedh for prodding nai,H heads- Sweep t{he sulbsVat t1huraug'hly'to•remove
any dust and debris prior to apial'icatiion,and prime the substrate((jiff apprica'ble).
6.3 Elastobase,Elastobase P or Mu ide NO Base_
6.3.1 Small be imstagled in compliance u tfh the ooddied mquirernents fbT ASTM D226,Type lfl a ndeTlayment in FIBC Sections
1.507 for the type of Prepared roof covering to be installed-
6.3-2 Rion-Tale Auulicatfions::
Reference its made to tfhe cuffent edrition of the NR4rA Steep lope Roofing Manual and ARMA recommendations for
inmstalffing shingge und&kyrients and fishings
EllasWbase, IDlas#abase IF or Mwfl--4Hrde INai l Ram€msy be mjaTed v..YAh, a lbyyer of IPafs�itik,iPWyffex:SAP or SAP FR,
Ifxla>tdie45de SA VP Cap 51%aa or SHAW Cap Sheift 1(Ff`;)),D uall Pw or TEL-Pm,siO-hare 1,EL-L'mflex S6 G or S6 G FR i n
hot asphalt or Polyflex G or G FR,torch applied.
6.3.3 Tile Applications:
Reference is made to FRSA/TRI April 2012(04-12) Installation Manual and Table 1 herein, using the instructions noted
aoove as a guideline.
6.44 Polystick MTS, MTS PLUS, IR-Xe,TU P,TU Plus,TU Max Polyflex SAP or SAP FR,Mule-Hide SA-APP Cap Sheet or SA-
APP Cap Sheet(FR),Dual Pro or Tile Pro:
6.4.1 Shall be installed in compliance with the codified requirements for ASTM D1970 underlayment in FBC Sections 1507
for the type of prepared roof covering to be installed.
6.4.2 Direct-to-Deck with Mechanically Fastened Roof Covers:
All self-adhering materials,with the exception of Polystick TU Plus, Polyflex SAP or SAP FR and Mule-Hide SA-APP Cap
Sheet or SA-APP Cap Sheet(FR) should be back-nailed in selvage edge seam in accordance with Polyglass/Mule-Hide
Back Nailing Guide. Nails shall be corrosion resistant, 11 gauge ring-shank type with a minimum 1-inch diameter
metal disk or Simplex-type metal cap nail,at a minimum rate of 12"o.c. Polystick TU Plus should be back-nailed using
the above noted fasteners and spacing, in area marked "nail area, area para clavar" on the face of membrane. The
head lap membrane is to cover the area being back-nailed
All seal4ap seams (selvage laps) must be
firmly rolled with a minimum 28 lb- hand
roller to ensure full contact and adhesion_
For Dual Pro and Tile Pro, align the edge of .
the top sheet to the end of the glue pattern a sx3"
(the sheet mail overlap the fabric)_
f,e
'S
wow QP Elves Sean OF DL72 LW and Tme PM
Agl over-fabft and oacer-granaule end-haps sihalll have a 6-finch waW4 unftnn Ilayw of Pokplus 56 Preanium Modified
Wetf lDryi Cement or P'oWass PGSW IfG9odffied Cement applied in between the apOlRzfiurn of the IlaP_
Polystick TU Plus,Duall Pro and Tile Pro may not be used in any exposed application such as cdcicets,exposed valleys,
or exposed roof to wagg de aft
Exterior Research and Design,I.I.C. Evaluation Report 1312060.02.09-1120
Certificate of Authorization 69503 FL5259-R24
Revision 20:07/22/2015
?age 10 of 12
�J\T_�RINITYJERD
Repaiiir at Pdpfficknmmbranas i�tt®be amwR Ssh.a l by apjp lung Pdt.,�Ans 5D PmmAutTim IIY radi ed-Wl elfi uy Cement or
Fail/gLus I?GMG NAladimed Cavl amt ttco tiitve area iam meEd aDf it or„ffibllbwEd by a tmfii�'m, € , 6%6;lrmh etch.of the
Polystick material of like kind, set and hand rolled in place over the repair area. Patch laps, if needed, shaii z_
installed in a water shedding manner.
All Polystick membranes shall be installed to ensure full contact with approved substrates. Polyglass requires a
minimum of 40-Ib weighted-roller or, on steep slopes, use of a stiff broom with approximately 40-lbs of load applied
for the field membrane. Hand rollers are acceptable for rolling of patches, laps(min.28 Ib roller)or small areas of the
roof that are not accessible to a large roller or broom.
6.4.3 Tile Applications(not allowed for PolVstick/R-Xe):
Reference is made to FRSA/TRI April 2012 (04-12) Installation Manual and Table 1 herein, using the instructions noted
above as a guideline.
or mechanically fastened tile roofing over 2-ply system, consisting of base sheet and self-adhering top sheet(s), base
��eet fasteningshall be not less than FRSA/TRI April 2012 (04-12),Table 1.
=oar adhesive-set tile applications, refer to Section 5.6.4 herein.
For nail-on tile systems over Polystick MTS, battens are required for loading/staging of the tile.
For nail-on tile systems over Polystick MTS PLUS:
➢ Battens are required for loading/staging of lugged tile regardless of slope.
Battens are required for loading/staging of flat tile at slopes in excess of 5:12.
6.4.4 Two(2) Ply UnderlaymentSystems:
Polystick MTS or MTS PLUS followed by Polystick MTS, MTS PLUS, TU P, TU Plus, TU Max, TilePro or Polyflex SAP is
allowable for use under mechanically attached prepared roof systems. Limits of use are those associated with the
top-layer material. This is not a requirement, but is allowable if a 2-ply underlayment system is desire-c,
Polystick MTS PLUS followed by Polystick TU P, TU Plus, TU Max, TilePro or Polyflex SAP is allowable for use under
loam-on iife systems. Limits of use are those associated with the top-layer material. This is not a requirement, but is
a�rowable if a 2-ply underlayment system is desired.
6.5 Elastoflex S6 G or S6 G FR:
6.5.1 Elastoflex S6 G or S6 G FR shall be installed in compliance with current Polyglass published installation requirements.
For use in tile applications, reference is made to FRSA/TRI April 2012(04-12) Installation Manual and Table 1 herein.
6.5.2 Elastoflex S6 G or S6 G FR shall be fully asphalt-applied to the substrates noted in Section 5.6. Side laps shall be
-nmimum 3-inch and end-laps minimum 6-inch wide, off-set minimum 3 feet from course to course. Side and end
jos snarl be fully adhered in a complete mopping of hot asphalt with asphalt extending approximately 3/8-inch
Beyond the lap edge.
6.6 Polyflex G or G fig:
6.6.1 Polyflex G or G FR shall be installed in compliance with current Polyglass published installation requirements. For use
in tile applications, reference is made FRSA/TRI April 2012(04-12) Installation Manual and Table 1 herein.
6.6.2 Polyflex G or G FR shall be fully torch-applied to the substrates noted in Section 5.6. Side laps shall be minimum 3-
inch and end-laps minimum 6-inch wide, off-set minimum 3 feet from course to course. Side and end laps shall be
fully heat-welded and inspected to ensure minimum 3/8-inch flow of modified compound beyond the lap edge.
6.7 Tile Staging:
6.7.1 Tile shall be loaded and staged in a manner that prevents tile slippage and/or damage to the underlayment. Refer to
Polyglass published requirements for tile staging.
6.7.2 Battens and/or Counter-battens, as required by the tile manufacturer and FRSA/TRI April 2012 (04-12) must be used
on all roof slopes greater than 7:12. Precautions should be taken as needed, such as the use of battens or sail-
boards,to prevent tile sliding and/or damage to the underlayment during the loading process.
6.7.3 For nail-on tile systems over Polystick MTS, battens are required for loading/staging of the tile.
�erior Research and Design,LLC. Evaluation Report P12060.02.09-R20
C-�rtfficate of Authorization#9503 FL5259-R24
4avvision 20:07/22/2015
uge 11 of 12
QOTMrry1ER®
6.7.4 For mail-on the systems over Polystici:MTS PLUS_
]�- Battens are required for Poadingfst2g5ng of lagged file regardless of slope.
> Battens are required for loading/staging of flat the at slopes in excess of 5:42.
6.7.5 The minimum cure time after installation of self-adhering membranes and before loading of roofing tiles is forty-eight
Rte)hours.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product.
8. MANUFACTURING PLANTS:
Contact the noted QA agency for information on product locations covered for F.A.C. Rule 61G20-3 QA requirements.
9. QUALITY ASSURANCE ENTITY:
UL, LLC—QUA9625;(314)578-3406; k.chancellor@us.ul.com
-END OF EVALUATION REPORT-
Exterior Research and Design,I.I.C. Evaluation Report P12060.02.09-1120
Certificate of Authorization#9503 FL5259-R2�
Revision 20:07122/2Q!-:-
Page
0:07122/2GPage 12 of 11