HomeMy WebLinkAboutProduct Approval (2) Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQw...
r
r \ I i ki A M, ...
eLE
0lit
X
Ift-15YAO DOW~
• 9 Q asa Q r '6 r ®
orida Do,carnantj BCIS Home E Log In User Registration Hot Topics Submit Surcharge , Stats&Facts Pubricatio22ons E FBC Staff BCIS Site Map Unks t Search
Business�(}, �?�
Professional ° USER PuubtliApproval
Regulation
Product Approval Menu>Product or Application Search>ApolicaWn List>Application Detail
r FL# FL16027-R1
Application Type Revision
Code Version 2014
Application Status Approved
Comments
Archived
Product Manufacturer TRI-BUILT Roofing Products
Address/Phone/Email 9050 Louisiana Street
Merrillville,IN 46410
(201)842-2449
david.ruiz@tribuiltmaterialsgroup.com
Authorized Signature David Ruiz
david.ruiz@tribuiltmaterialsgroup.com
Technical Representative C Richard Schurman
Address/Phone/Email 9050 Louisiana Street
Merrillville,IN 46410
rich.schurman@alliedbuilding.com
Quality Assurance Representative C Richard Schurman
Address/Phone/Email 9050 Louisiana Street
Merrillville,IN 46410
rich.schurman@alliedbuilding.com
Category Roofing
Subcategory Modified Bitumen Roof System
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who developed Robert Nieminen
the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 06/27/2016
Validated By John W. Knezevich,PE
Validation Checklist-Hardcopy Received
Certificate of Independence FL16027 R1 COI 2015 01 COI Nieminen.pdf
Referenced Standard and Year(of Standard) Standard Year
ASTM D6163 2000
ASTM D6164 2005
ASTM D6222 2008
FM 4470 1992
1 of 2 1/28/2016 2:56 PM
Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQw...
FM 4474 2004
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 03/23/2015
Date Validated 03/29/2015
Date Pending FBC Approval 03/31/2015
Date Approved 06/22/2015
Summary of Products
FL# Model,Number or Name Description
16027.1 TRI-BUILT Modified Bitumen Roof SBS and APP modified bitumen roof systems
Systems
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16027 RI II 2015 03 FINAL Al ER TRI-
Approved for use outside HVHZ:Yes BUILT MODBIT FL16027-Rl.odf
Impact Resistant: N/A Verified By: Robert Nieminen PE-59166
Design Pressure: +N/A/-622.5 Created by Independent Third Party:Yes
Other: 1.)The DP noted in this application refers to one Evaluation Reports
system. Refer to ER Appendix for all systems and max. FL16027 R3 AE 2015 03 FINAL ER TRI-
design pressures.2.) Refer to ER Section 5 for Limits of Use. BUILT MODBIT FL16027-Rl.Ddf
Created by Independent Third Party:Yes
Back Next
Contact Us::1940 North Monroe Street,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Coovriaht 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.*Pursuant to Section
455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address ti have
one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal
address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,
please click here
Product Approval Accepts:
®M FcR M
securitv.%mmuics
2 of 2 1/28/2016 2:56 PM
i�.
APPENDIX 1:ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE
Table Deck Application Type Description Page
1A-1 Wood New or Reroof(Tear-Off) A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 4
1A-2 Wood New,Reroof(Tear-Off)or Recover A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 5
113 Wood New,Reroof(Tear-Off)or Recover B Mech.Attached Base Insulation,Bonded Top Insulation,Bonded Roof Cover 5
1C Wood New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 6
1D Wood New,Reroof(Tear-Off)or Recover D Prelim.Attached Insulation,Mech.Attached Base Sheet,Bonded Roof Cover 6
1E-1 Wood New or Reroof(Tear-Off) E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 7
1E-2 Wood New,Reroof(Tear-Off)or Recover E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 8
1F Wood New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 8
2A Steel or Conc. New,Reroof(Tear-Off)or Recover B Mech.Attached Base Insulation,Bonded Top Insulation,Bonded Roof Cover 9
2B Steel or Conc. New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 10
2C Steel or Conc. New,Reroof(Tear-Off)or Recover D Prelim.Attached Insulation,Mech.Attached Base Sheet,Bonded Roof Cover 11
3A-1 Concrete New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 12-14
3A-2 Concrete New or Reroof(Tear-Off) A-1 Bonded Temporary Roof,Bonded Insulation,Bonded Roof Cover 15
3B Concrete New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 15
4A LWIC New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 16-17
413 LWIC New or Reroof(Tear-Off) A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 17
4C LWIC New or Reroof(Tear-Off) E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 18-20
SA CWF New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 21
5B CWF New,Reroof(Tear-Off)or Recover A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 22
SC CWF New,Reroof(Tear-Off)or Recover B Mech.Attached Base Insulation,Bonded Top Insulation,Bonded Roof Cover 22
5D CWF -New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 23
SE CWF New,Reroof(Tear-Off)or Recover E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 23
6A Gypsum New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 24
68 Gypsum New,Reroof(Tear-Off)or Recover A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 25
6C Gypsum New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 25
6D Gypsum New,Reroof(Tear-Off)or Recover E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 25
7A Various Recover A-1 Bonded Insulation,Bonded Roof Cover 26-27
7B Various Recover F Non-Insulated,Bonded Base Sheet,Bonded Roof Cover 27
The following notes apply to the systems outlined herein.
1. The roof system evaluation herein pertains to above-deck roof components. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the AHJ. Load resistance of the
roof deck shall be documented through proper codified and/or FBC Approval documentation.
2. Insulation/base sheet fasteners shall be of sufficient length for the following deck engagement:
➢ Wood: Minimum 0.75-inch penetration.
➢Steel: Minimum 0.75-inch penetration and engage the top flute of the steel deck.
➢ Concrete: Minimum 1-inch embedment into pilot hole in accordance with fastener manufacturer's published installation instructions.
3. Unless otherwise noted,insulation may be any one layer or combination of polyisocyanurate,polystyrene,wood fiberboard,perlite,Dens Deck,Dens Deck Prime,SECUROCK Gypsum-Fiber Roof Board or SECUROCK
Glass-Mat Roof Board that meets the QA requirements of F.A,C.Rule 61G20-3 and is documented as meeting FBC 1505.1 and,for foam plastic,FBC 2603.4.1 or 2603.6,when installed with the roof cover.
Exterior Research and Design,LLC.d/b/a Trinity)ERD Evaluation Report A42970.10.12-R1 for FL16027-R1
Certificate of Authorization t#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 1 of 27
i
TRINrry I
ERD
4. Minimum 200 psi,minimum 2-inch thick lightweight insulating concrete may be substituted for rigid insulation board for System Type D(mechanically attached base sheet,bonded roof cover),whereby the base
sheet fasteners are installed through the LWIC to engage the structural steel or concrete deck. The structural deck shall be of equal or greater configuration to the steel and concrete deck listings. Roof decks and
structural members shall be in accordance with FBC requirements to the satisfaction of the AHJ. Load resistance of the roof deck shall be documented through proper codified and/or FBC Approval documentation.
5. Unless otherwise noted,insulation adhesive application rates are as follows. Ribbon or bead width is at the time of application;the ribbons/beads shall expand as noted in the manufacturer's published instructions.
➢ HA(HA): Full coverage at 25-30 lbs/square.
➢ Dow Insta-Stik Roofing Adhesive(D-IS): Continuous 0.75 to 1-inch wide ribbons,12-inch o.c.
➢ Millennium One Step Foamable Adhesive(M-OSFA): Continuous 0.25 to 0.5-inch wide ribbons,12-inch o.c.
➢ OMG OlyBond 500(OB500): Continuous 0.75 to 1-inch wide ribbons,12-inch o.c.(PaceCart or SpotShot). Note: OlyBond Green may be used where OlyBond 500 is referenced.
➢ OlyBond Classic(OB Classic): Full coverage at 1 gal/square.
➢ 3M CR-20: Continuous 2.5-3.S-inch wide ribbons,12-inch o.c.
➢ Note: When multiple layers(s)of insulation and/or coverboard are installed in ribbon-applied adhesive,adhesive ribbons shall be staggered from layer-to-layer a distance of one-half the ribbon spacing.
➢ Note: The maximum edge distance from the adhesive ribbon to the edge of the insulation board-shall be not less than one-half the specified ribbons spacing.
5. Unless otherwise noted,all insulations are flat stock or taper board of the minimum thickness noted. Tapered polyisocyanurate at the following thickness limitations may be substituted with the following Maximum
Design Pressure(MDP)limitations. In no case shall these values be used to'increase'the MDP listings in the tables;rather if MDP listing below meets or exceeds that listed for a particular system in the tables,then
the thinner board listed below may be used as a drop-in for the equivalent thicker material listed in the table:
➢ Millennium One Step Foamable Adhesive(M-OSFA): MDP -157.5 psf (Min,0.5-inch thick)
➢ OMG OlyBond 500(013500): MDP -45.0 psf (Min.0.5-inch thick Multi-Max FA-3)
➢ OMG OlyBond 500(013500): MDP -187.5 psf (Min.0.5-inch thick ISO 95+GL)
➢ OMG OlyBond 500(OB500): MDP -315.0 psf (Min.0.5-inch thick ENRGY 3)
➢ OMG OlyBond 500(013500): MDP -487.5 psf (Min.0.5-inch thick ACFoam II)
➢3M CR-20: MDP -117.5 psf (Min.1.0-inch thick)
7. Bonded polyisocyanurate insulation boards shall be maximum 4 x 4 ft.
8. For mechanically attached components or partially bonded insulation,the maximum design pressure for the selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with FBC
Chapter 16,and Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are RAS 117 and FM LPDS 1-29.
Assemblies marked with an asterisk*carry the limitations set forth in Section 2.2.1.5.1(a)of FM LPDS 1-29 for Zone 2/3 enhancements.
9. For fully bonded assemblies,the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16,and no rational analysis is permitted.
10. For mechanically attached components over existing decks,fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the
minimum requirements for the system. Testing and analysis shall be in accordance with TAS 105 or ANSI/SPRI FX-1.
11. For existing substrates in a bonded recover installation,the existing roof system shall be examined for compatibility and bond performance with the selected adhesive,and the existing roof system shall be capable of
resisting project design pressures on its own merit to the satisfaction of the AHJ,as documented through field uplift testing in accordance with ASTM E907,FM LPDS 1-52,ANSI/SPRI IA-1 or TAS 124.
12. For Recover Applications using System Type D,the insulation is optional;however,the existing roof system shall be suitable for a recover application.
13. LWIC shall be cast in accordance with FBC Section 1917 to the satisfaction of the Authority Having Jurisdiction. For systems where specific LWIC is referenced,refer to current LWIC Product Approval for specific deck
construction and limitations. For systems where specific LWIC is not referenced,the minimum design mix shall be 300 psi. In all cases,the minimum top-coat thickness is 2-inches. For LWIC over structural concrete,
reference is made to FBC Section 1917.4.1,Point 1.
Exterior Research and Design,LLC.d/b/a Trinity(ERD Evaluation Report A42970.10.12-R1 for FL16027-Ri
Certificate of Authorization#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 2 of 27
a
`, Tf�IIiiITY ERI]
14. Unless otherwise noted,refer to the following references for bonded base,ply or cap sheet applications.
TABLE 1.TRI-BUILT ROOF Covens.
Reference Layer Material Application
BP-AA Base FBC Approved ASTM D4601,Type II
FBC A HA at 20-40 lbs/square
(Base and Ply sheets,Asphalt-Applied) Ply Approved ASTM D2178,Type IV or VI
SBS-AA Cap TriBuilt SBS Granular HA at 20-40 lbs/square
(SBS,Asphalt-Applied)
SBS-TA
(SBS,Torch-Applied) Cap TriBuilt SBS Granular Torch-Applied
'SBS-SA Base TriBuilt SA SBS Base T
(SBS,Self-Adhering) Cap TriBuilt SA SBS Cap Self-Adhering
—APP-TA Base or Ply TriBuilt APP Smooth
APP,Torch-Applied) Torch-Applied
( lied pp� ) Cap TriBuilt APP Smooth,TriBuilt APP Granular
APP-SA
(APP,Self-Adhering) Cap TriBuilt SA APP Cap Self-Adhering
15. The following represent priming requirements for gypsum-based coverboards:
➢ Dens Deck and Dens Deck Prime shall be field-primed with ASTM D41 primer prior to self-adhering or torch-applied membrane application. No priming is required for hot-asphalt membrane applications.
➢ SECUROCK Gypsum-Fiber Roof Board does not require field priming for any membrane application.
16. "MDP"=Maximum Design Pressure is the result of testing for wind load resistance based on allowable wind loads.Refer to FBC 1609 for determination of design wind loads.
Exterior Research and Design,LLC.d/b/a Trinity ERD Evaluation Report A42970.10.12-R3 for FL16027-R1
Certificate of Authorization#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 3 of 27
TRINITYIERD
TABLE 3A-1:WOOD DECKS—NEW CONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE A-2:MECHANICALLY ATTACHED ANCHOR SHEET,BONDED INSULATION,BONDED ROOF COVER
System Deck Anchor Sheet Base Insulation Top Insulation Roof Cover MDP
No. (See Note 1) Type Fasteners Attach Type Attach Type Attach Base Ply Cap (psf)
Min.0.25-inch Dens
Polyglass G2 Base, 8-inch o.c.in 4- Deck,Dens Deck Prime,
32 ga.,1-5/8- inch lap and 8- (Optional)FBC SECUROCK Gypsum-
inch plywood Firestone M8 Base,JM (Optional)
Min.19/32- CertainTeed Glasbase, inch diameter inch o.c.in Approved, Fiber Roof Board,Min. SBS-AA,
W-1 at max.24- Perma-Ply 28,Tamko BP-AA tin caps with 11 three,equally ASTM C1289, HA 0.75-inch FescoBoard HA BP-AA SBS-TA, -60.0
inch spans Glass Base or ga.annular ring spaced, type II polyiso- (homogeneous)or min. APP-TA
GAFGLAS#75 shank nails staggered cyanurate 0.5-inch Structodek
center rows High Density Fiberboard
Roof Insulation
Polyglass G2 Base, 8-inch o.c.in 4-
32 ga.,1-5/8- inch lap and 8- (Optional)FBC (Optional)
Min.19/32- CertainTeed Glasbase, Min.0.25-inch Dens SBS-SA,
inch diameter inch o.c.in Approved, One or
W-2 inch plywood Firestone Base,o tin caps with 11 three,equally ASTM C3289, HA Deck,Dens Deck Prime, HA SBS-SA more SBS- APP-SA, -60.0
at max.24 Perma-Ply 2 288,TamkSECUROCK Gypsum- SBS-TA or
inch spans Glass Base or ga.annular ring spaced, type II polyiso- Fiber Roof Board SA or APP-TA
GAFG LAS#75 shank nails staggered cyanurate APP-TA
center rows
6-inch o.c.in 4- Min.2-inch D-IS,OB500,
32 ga.,1-5/8- inch lap and 6-
Min.19/32- ACFoam II,III, CR-20 or M- Min.0.25-inch Dens D-IS,
at max.24-
Polyglass Elastobase inch diameter inch o.c.in SBS-AA,
Inch plywood H-Shield,H- OSFA,atop Deck,Dens Deck Prime OB500, (Optional)
W-3 or Polyglass tin caps with 12 four,equally 'Shield CG BP-AA
fastener or SECUROCK Gypsum- CR-20 or BP-AA SBS-TA, -60.0
inch spans Elastobase Poly ga.annular ring spaced, Multi-Max FA3 rows,7-inch Fiber Roof Board M-OSFA APP-TA
shank nails staggered or ENRGY-3 cc
center rows
6-inch o.c.in 4- Min.2-inch D-IS,OB500,
32 ga.,1-5/8- inch lap and 6- (Optional)
Min.19/32- ACFoam II,III, CR-20 or M- D-I5, SBS-SA,
Polyglass Elastobase inch diameter inch o.c.in One or
inch plywood H-Shield,H- OSFA,atop (Optional)Additional OB500, APP-SA,
W-4 or Polyglass tin caps with 12 four,equally SBS-SA more SBS- -60.0
at max.24- Shield CG, fastener layers of base insulation CR-20 or 585-TA or
Elastobase Poly ga.annular ring spaced, SA or
inch spans shank nails staggered Multi-Max FA3 rows,7-inch M OSFA APP-TA
center rows APP TA
or ENRGY-3 oc
Exterior Research and Design,I.I.C.d/b/a Trinity)ERD Evaluation Report A42970.10.12-111 for FL16027-R1
Certificate of Authorization#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 4 of 27
c•
T .KNITY 1,E'RD
TABLE SA-2:WOOD DECKS—NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET,BONDED INSULATION,BONDED ROOF COVER
System Deck Anchor Sheet Base Insulation Top Insulation Roof Cover MDP
No. (See Note 1) Type Fasteners Attach Type Attach Type Attach Base Ply Cap (psf)
Min.0.25-inch Dens Deck,
12-inch o.c.in 4-
Polyglass (Optional)FBC Dens Deck Prime,SECUROCK
Min,19/32- OMG Flat inch lap and 12-
Elastobase or Approved, Gypsum-Fiber Roof Board,
W 5 inch plywood Polyglass Bottom Plates inch equally
in two, ASTM C1289, HA Min.0.75-inch FescoBoard HA BP-AA (Optional) TA,API-AA,SBS-
W-5
BS- _60.0
at max.24 (square)with equally spaced, BP-AA TA,APP-TA
inch spans Elastobase Roofgrip#12 staggered center type II polyiso- (homogeneous)or min.0.5-
Poly cyanurate inch Structodek High Density
rows Fiberboard Roof Insulation
12-inch o.c.in 4-
Polyglass (Optional)FBC �" (Optional)
Min.19/32- OMG Flat inch lap and 12-
Elastobase or Approved, Min.0.25-inch Dens Deck, One or SBS-SA,APP-
o,
inch plywood Bottom Plates inch o.c.in tw
W-6 Polyglass ASTM C1289, HA Dens Deck Prime,SECUROCK HA SBS-SA more SBS- SA,SBS-TA -60.0
at max.24- Elastobase (square)with equally spaced, type II polyiso- Gypsum-Fiber Roof Board SA or APP- or APP-TA
inch spans Poly Roofgrip#12 staggered center cyanurate TA
rows
TABLE IB:WOOD DECKS—NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE B: MECHANICALLY ATTACHED BASE INSULATION,BONDED TOP INSULATION,BONDED ROOF COVER
System Base Insulation Layer Top Insulation Layer Roof Cover MDP
Deck(See Note 1)
No. Type Fasteners Attach Type Attach Base Ply Cap (psf)
Min.19/32-inch Min.1.5-inch Dekfast Hex with Min.0.75-inch FescoBoard (Optional if (Optional if using
1 per (homogeneous)or min.0.5-inch AA Base)One or SB5-AA,SBS-TA,
W-7 plywood at max.24-inch ENRGY H-Shield Dekfast#12 t 1.33 ftZ Structodek High Density Fiberboard HA using AA Ply) more BP-AA or APP-TA 60.0
spans or Polytherm MP-3 with TruFast st DDPP BP AA
Roof Insulation APP-TA
Exterior Research and Design,LLC,d/b/a Trinity ERD Evaluation Report A42970.10.12-R3 for FL16027-RI
Certificate of Authorization#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 5 of 27
T , Iii 11Y f ERP
TABLE 1C:WOOD DECKS—NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER '
System Deck(See Note 1) Base Insulation Top Insulation Layer Roof Cover MDP
No. Layer
Type Fasteners Attach Base Ply Cap (Psfl
(Optional) Min.0.5-inch Structodek High Density
Min.19/32-inch Dekfast Galvalume (Optional if (Optional if using AA
One or more layers, Fiberboard Roof Insulation or min.0.25- 1 per 1.33 SBS-AA,SBS-TA,APP-
W-8 plywood at max. Steel Hex with z using AA Ply) Base)One or more 8P-AA -82.5
24-inch spans any combination, inch Dens Deck,Dens Deck Prime or Dekfast#12 DP ft BP-AA or APP-TA TA
loose laid SECUROCK Gypsum-Fiber Roof Board
(Optional) Dekfast Galvalume
Min.19/32-inch Steel Hex with
One or more layers, Min.1.5-inch ENRGY 3,H-Shield or 1 per 1.33 (Optional)One or more SBS-SA,APP-SA,SBS-
W-9 -plywood at max. Dekfast#12 DP or SBS-SA -82.5
24-inch spans any combination, Polytherm TruFast MP-3 with SBS SA or APP TA TA or APP-TA
loose laid Tru Fast DP
TABLE 1D:WOOD DECKS—NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE D:PRELIMINARILY ATTACHED INSULATION,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER
System Deck(See Note 1) Insulation Layer(s) Base Sheet Roof Cover MDP
No. Type Attach Base' Fasteners Attach Ply Cap (Psfl
Poiyglass Elastobase,Polyglass CMG Flat Bottom Plates
Min.19/32-inch Elastobase Poly,Polyglass G2 Base, (square)with Roofgrip 12-inch o.c.in 4-inch lap and 12- (Optional)One SBS-AA,
W-30 One or more layers, Prelim.
plywood at max. CertainTeed Glasbase,Firestone MB #14,Dekfast Hex with inch o.c.in two,equally spaced, or more BP-AA SBS-TA, -52.5
24-inch spans any combination Attached Base,JM Perma-Ply 28,Tamko Glass Dekfast#14 or TruFast staggered center rows or APP-TA APP-TA
Base or GAFGLAS#75 MP-3 with TruFast HD
Min.19/32-inch Dekfast Hex with Dekfast 12-inch o.c.in 4-inch lap and 12- SBS-SA,.
One or more layers, Prelim. Polyglass Elastobase or Polyglass. One or more APP-SA, *
W-11 plywood at max. #14 or TruFast MP-3 with inch o.c.in two,equally spaced, 52.5
24-inch spans any combination Attached Elastobase Poly with poly top surface. TruFast HD staggered center rows 565-SA SBS-TA or
APP-TA
Min.19/32-inch 12-inch o.c.in 4-inch lap and 12- (Optional)One SBS-AA,
One or more layers, Prelim. Polyglass Elastobase or Polyglass OMG Flat Bottom Plates
W-12 plywood at max. inch o.c.in two,equally spaced, or more BP-AA SBS-TA, -60.0
24-inch spans any combination Attached Elastobase Poly (square)with Roofgrip#12 staggered center rows or APP-TA APP-TA
Min.19/32-inch 12-inch o.c.in 4-inch lap and 12- SBS-SA,
One or more layers, Prelim. Polyglass Elastobase or Polyglass OMG Flat Bottom Plates One or more APP-SA, *
W-13 plywood at max. any combination Attached Elastobase Poly with poly top surface (square)with Roofgrip#12 inch o.c.in two,equally spaced, SBS-SA SBS-TA or 60.0
24-inch spans staggered center rows App-TA
Exterior Research and Design,LLC.d/b/a Trinity I ERD Evaluation Report A42970.10.12-R1 for FL16027-RS
Certificate of Authorization#9503 Revision 1:03/23/2015
Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 6 of 27
� a�