HomeMy WebLinkAboutProduct Approval R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
' Limits of Use Installation Instructions
` Approved for use in HVHZ: No FL16660 R5 II WL-2000-0218-24-27L RevE s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +23.9/-26.7 Evaluation Reports
Other: Glazing is an available option for all the Pan Series FL16660 R5. AE EvalReot r5 s.odf
product listed but it does not meet the impact resistant Created by Independent Third Party: Yes
requirement for windborne debris regions.
16660.13 13. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 97" wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 RS II WL-0600-0110-08-41-46 RevB s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +41.1/-46.4 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.odf
Created by Independent Third Party: Yes
16660.14 14. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 97" wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0110-08-41-46L RevD s.odf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +41.1/-46.4 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000 FL16660 R5 AE EvalReot r5 s.pdf
&800 Series product only. It does meet the impact resistant Created by Independent Third Party: Yes
requirement for windborne debris regions. Glazing is not an
available option for the 900 Series product.
16660.15 15. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 16'2"wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0194-08-31-35 RevB s.odf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Press
FL16660 RS AE EvalReot r5 s.par
Created by Independent Third Party: Yes
16660.16 16. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 16'2" wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0194-08-31-35L RevD s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +31.3/-34.9 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000 FL16660 R5 AE EvalReot r5 s.pdf
&800 Series product only. It does meet the impact resistant Created by Independent Third Party: Yes
requirement for windborne debris regions. Glazing is not an
available option for the 900 Series product.
40k 16660.17 17. PAN C2000, C2400, C2410, PAN Series sections pan wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 RS II WL-2000-0110-41-46 RevB s.odf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +41.1/-46.4 Evaluation Reports
Other: FL16660 R5 AE EvalReot r5 s.odf
Created by Independent Third Party: Yes
16660.18 18. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 16'2"wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Product Approval Method Method 1 Option D
Date Submitted 08/20/2015
DateValidated 08/24/2015
Date Pending FBC Approval 08/25/2015
Date Approved 10/16/2015
Summary of Products
Go to Page Page 1/2
FL# Model,Number or Name Description
16660.1 01. HT 5000 Series HT Series sectional Aluminum sandwich type garage door
9'2"wide
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-5000-0110-08-40-45 RevD s.Ddf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +40.0/-45.0 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.Ddf
Created by Independent Third Party: Yes
16660.2 02. HT 5000 Series HT Series sectional Aluminum sandwich type garage door
16'2" wide
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-5000-0194-08-31-35 RevD s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +31.3/-34.9 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.pdf
Created by Independent Third Party: Yes
16660.3 03. HT 5000 Series HT Series sectional Aluminum sandwich type garage door
18'2" wide
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-5000-0218-08-30-34 RevC s.Ddf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +30.0/-33.9 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.pdf
Created by Independent Third Party: Yes
16660.4 04. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 97"wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 RS II WL-0600-0110-08-25-28L RevD s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +24.8/-28.0 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000, FL16660 R5 AE EvalRept r5 s.pdf
800 &900 Series product only but it does not meet the Created by Independent Third Party: Yes
impact resistant requirement for windborne debris regions.
16660.5 05. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 16'2" wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0194-08-24-27L RevD s.Ddf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +23.9/-26.7 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000 FL16660 RS AE EvalRept r5 s.Ddf
&800 Series product only but it does not meet the impact Created by Independent Third Party: Yes
resistant requirement for windborne debris regions. Glazing
is not an available option for the 900 Series product.
16660.6 06. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 18'2" wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0218-08-24-27L RevE s.Ddf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +23.9/-26.7 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000 FL16660 R5 AE EvalRept r5 s.pdf
&800 Series product only but it does not meet the impact Created by Independent Third Party: Yes
resistant requirement for windborne debris regions. Glazing
is not an available option for the 900 Series product.
16660.7 07. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 18'2"wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0218-08-30-34 RevC s.odf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +30.0/-33.9 Evaluation Reports
Other: FL16660 RS AE EvalRept r5 s.odf
Created by Independent Third Party: Yes
16660.8 08. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 97" wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-2000-0110-25-28L RevD s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +24.8/-28.0 Evaluation Reports
Other: Glazing is an available option for all the Pan Series FL16660 R5 AE EvalRept r5 s.odf
product listed but it does not meet the impact resistant Created by Independent Third Party: Yes
requirement for windborne debris regions.
16660.9 09. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 9'2" wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-2000-0110-35-39 RevC s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +35.0/-39.0 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.odf
Created by Independent Third Party: Yes
16660.10 10. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 167"wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-2000-0194-24-27L RevD s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +23.9/-26.7 Evaluation Reports
Other: Glazing is an available option for all the Pan Series FL16660 R5 AE EvalRept r5 s.odf
product listed but it does not meet the impact resistant Created by Independent Third Party: Yes
requirement for windborne debris regions.
16660.11 11. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 16'2" wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
R2481, C2482, R2482, C2500,
R2560, R2561, R2571, R2572,
R2580, R2581, R2582
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-2000-0194-31-35 RevC s.odf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +31.3/-34.9 Evaluation Reports
Other: FL16660 R5 AE EvalRept r5 s.odf
Created by Independent Third Party: Yes
16660.12 12. PAN C2000, C2400, C2410, PAN Series sectional pan type garage door 18'2"wide
R2410, C2460, R2460, C2461,
R2461, C2471, R2471, C2472,
R2472, C2480, R2480, C2481,
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-2000-0194-37-42 RevB s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +37.4/-41.7 Evaluation Reports
Other: FL16660 R5 AE EvalReot r5 s.pdf
Created by Independent Third Party: Yes
16660.19 19. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 97"wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0110-08-21-24L RevC s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant: No Created by Independent Third Party: Yes
Design Pressure: +21.3/-24.1 Evaluation Reports
Other: Glazing is an available option for the 600, 700, 2000 FL16660 R5 AE EvalReot r5 s.Ddf
&800 Series product only but it does not meet the impact Created by Independent Third Party: Yes
resistant requirement for windborne debris regions. Glazing
is not an available option for the 900 Series product.
16660.20 20. HT 600, 700, 2000, 800, &900 HT Series sectional sandwich type garage door 16'2"wide
Series
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL16660 R5 II WL-0600-0194-08-37-42 RevB s.pdf
Approved for use outside HVHZ:Yes Verified By: John E. Scates 51737
Impact Resistant:Yes Created by Independent Third Party: Yes
Design Pressure: +37.4/-41.7 Evaluation Reports
Other: FL16660 R5 AE EvalReot r5 s.pdf
a Created by Independent Third Party: Yes
Go to Page Page 1/2
Back Next
Contact Us:: 1940 North Monroe Street,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Copyright 2007-2013 State of Florida. :: Privacy Statement::Accessibility Statement:: Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mall to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.*Pursuant to Section
455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under chapter 455,F.S.must provide the Department with an email address if they have
one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a
personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter
455,F.S.,please click here.
Product Approval Accepts:
®MEECIrEck
sccuriLYJti•:Tltics-
a
1 2 3 4 5 6 7 8
NOTE: Treck configuration above
Door Width 16'-2"Shown the door opening does not affect
See chart below for other ine wind load rating of the door.
F door widths F
r--NOTE: For impact resistant lite options
1---Top Bracket r— Strut&Strut Attachment Flag Bracket
DETAIL A(sheet 2of 3) i Detail J(sheet 2of 3) 1 see Sheet 3 of 3. _ Detail H(sheet 2 of 3)
-\
._.._......_......_..._.....-....._._....__....-._..........�'-- ..._._..._.._._...--.._..-'---"-'--''-'--..._..'--'-- ............._._..._.. -''- --._.......---..__...... --._._...._..._-.-_..._.._ I
s STILE Ga Galvanized Steel
j
E I Jamb Bracket E
-"--'-..__......_.....__..,. ._._._... ---._...._...__ - --'- -._._.._...._ - .._..._.....-_.....__...._.__ Detail F(sheet 2of 3)
Door Hei ht _ • /-Slide Lock or Lock Bars 1
9 Detail G(sheet 2 of 3)
8'-0"$hOWil Mlanuol door locks ere
!! •+ 1 required unless an oulernctic ,
See chart € i aerator is installed. �I
below for other • ' _._ —__.__._....._.—_ 662'+/-3"
door heights .:.-......... . --- -- ___ ------ -
P
i
z 3
D 38,1" 3
t• 0 _ _ - i
—....._.._. —.�I}..._ —_—_ :—• _—Lt_. _- ' --- _-.. Z'+1- Its
_ I
.—. ._.._._...._.....--'--------........................ -_..._......._—._..__._... -'-' - - -- ---- - ---
Ir .
--Bottom Bracket End Hinge --' Strut&'Strut Attachment - Intermediate Hinge 4"+/-3"
Detail C(sheet 2 of 3) Detail B(sheet 2 of 3) Detail E(sheet 2 of 3) Detail D(sheet 2 of 3) 102°+/-3"'
Digitally signed by John E.Scates,P.E.
-12)
C This product has been evcb)cted per A`!SI/iiAStJA 18-U (ansa Jamb bracket a;.or.tities shown are for use wiin grade 2 or better southern pini jambs. Date:2015.08.181539:34-05'00'
C
air
5 for static pressure.
Sup;crt:ng strual�rai elements are to be designer by o registered professional engineer
This product has been eve ucled per ANSI/0%SMA 115-05 for large missile import and cyclic w nc pressure. for specific vdr,d :cods.
Model Number i No.of Tootai#of Struts Bomb NOTICE:
are c supplement to the `��)��?�pENd�-ct4�/j
----
Door +xnwa wyim l•me Theses \ F • /
HT_60&2_60 SERIES Height; w•ocma e"a"a" i :nelnL'nlirn instructions for c standard door nnA y i
HT_61 8.2 61 SERIES ;Sections ,h,,,�;r,";�,�,) Side ; _
....._.............;... ; only covers those procedures that vary freen �, _
r u No.5173 S
HT_63&2_63 SERIES 6'-0" ' 3 5 5 i stc;:doid door insial!a:ion. If these specific = ;
HT 64 8 2_64 SERIES ! 4. 6 5 i procedures are not fcilov ed, the door may not *; • i
iHT_70&270 SERIES HT_1082_10 SERIES; 6'-3" 4 6 5 i Perform as designed. �"6•• STATE Of :+�(�`
HT_71&:i-71 SERIES HT_12&2_12 SERIES! 6'-6" 4 } 6 5 i NOTICE:_
HT 80&2_80 SERIES HT_72&2_72 SERIES HT 14&2_14 SERIES; 6'-9" ' 4 6 6 i The it section of :his doer may be roploced /��+<•;l�(pat�P%'-(��a`�� .
B HT_81&2_81 SERIESIHT_73&2 73 SERIES HT_16&2_16 SERIES{ T-0' 4 6 6 ! H;,n�n..,e Inlceitherh cese,hhe isv:;t style
ndsti'a cold ,�///,SS/pNAI�a� g
HT 82&2_82 SERIES HT 74&2 74 SERIES HT_32&2 32SERIES; T-3" i 4 6 6 i configuration should rerrein the some. /� �
--- HT 90&2_90 SERIES HT 900 SERIES wro LITES HT 33 8 2_33 SERIES; 7'-6" 4 6 6
—_'—'---"---.....--'-'-`'-----"-- .................._........_........_..........................
.. _.._............................_.� NOTICE:—' - Desi n Pressures End Center Center Center : Impact T-6" ! 5 8 6 :?.niv a;e lite section per door is permitted.
F sf - sf Backers Stiles Hin es ! Stiles Hinges Stiles i Hinges iResistant _ •loon Saates, P.p.
Door Width ! - '-" The ii''• section con be used arr where exceat
T-9-9� ...4... 1_ 6 - 6 ;'ar she batiom section. If the to section is
3121 Fc:rgete
I 10'-2" 31.3 I 34.9 I Single 2 2 1 1 1 2 i 2 YES 7'-9' 5 8 6 - Carrolo. Texas 7500%
^ct lila top section lF.en :he struts must ae Florida F.E. 517 17
i 12'-2" 31.3 -34.9 Single 2 2 2 ; 2 2 2 YES g-p• 4 6 6 located as shown in the STRU`: GO"!FIGURA":`ION
14'-2" 31.3 -34.9 Single 3 32 2 3 3 YES g'-0" 5 g g on pace 3 of 3. professional engineer seal provided only for
16'-2• 31.3 -34.9 l Single 3 3 3 3 3 1 3 i YES FL#16660.16 .c%ficar;cr, of wind lead construction details.
Mo,,47— Becton heigm is 24 in
This product is ove;lable in norrcrer sizes w;th the same PSF and constructed as shown. IMPACT RESISTANT DESCRIPTION:
lAaximum Boar height is 16 f:.
This product is designed and sold by PSF. The AW or Fnglneef of Record is responsible for determining the le•rMWSF.IIT rues,l000S AW.CfIS wANPncT a+(,TIO ALM)ke
All duals, fryer those above the tested � Irl'•llq NtHIE9Wr11aU1 Ll'll+$N'INa IAAD Yr3:TWNAL aOax
A PSF required for any given site. height,.are ovoilable with jamb brackets $-'6 DESIGN PRESSURE.31.31-34.9 PSF A
or commercial furl angle. n mcxim;:m -r 911AWIRa N0.:1YL0606019seS31.5L SNEEr:10F7 REIt. D
spacing of '.lie jamb bra:ke`ts/track. clips 19ATEaRa: an114 11RAWB1Yk MVS
should be ma;r,tai.^.ed. now.—
r•me•auct•usat
e rwprnr•rtma !MODEL(S): See Sheet 3
1 2 3 4 5 6 7 8
2 3 4 56 7 T
8
PUSH NUT PUSH NUT 23.
4
F See QEIAIL K for push nut END HINGE "r TEK SCREW
See DPIWL
_K for push nut 1/4" X 3/4" Hey Washer Head F
L 0 0 DIUCCrIlCht. 14 Cc Galvanized Steel
TEK
Drilling (3 per Bottorri Bracket)
plocernent.
T-FT ADJUSTABLE IOP FIXTURE" TEK SCREW B0710M BRACKET
12 GO 3/4':'Hie, 'Woshe, Head 13 Go Galvanized Steel
:elf Drilling -r -rEK SCREW
a 0 TEK SCREW 1/4" X -4/4" Hey Washer PUSH 0 SH t,1UT
Self Drilling (6 per Hinge)
per
Broc�et)ec
�74 Head
41
1`4" X 3/4" Hex Washer Head _01N HEADROOM -:)p
Self Drill:nq (4 per Bracket)
BRACKET See, DEJA4- K for push nut
PUSH NUT placcment.
7/16"
See DETAIL K for push nut BOTTOM SEAL
E DETAIL A LOW HEADROOM DETAIL B p;OCerT1Cnt. DETAIL C E
TOP BRACKET
3 1/2" x 4'* E STRUT
4 1a Go 50 KSI M;n;murn
CoNarized Stee�
INTERMMDATE HINGE >�-JAMB BRACKEi
4"
X
IF, or 14 Go GolvaniZed Steel 2 Go Col,onized Steel -K BARS
Y .0co. SLIDE LOCK 1_01,
0 (no: required v,'*h operotor]
i a j
TEK Sr'R�'IjV 3
/4
He.
111
TE
D Washer Head K SCREW
1/4" X 3/4" Hex Wostier D
�;nlf Dr4linej (.1 per Hinge)
-� SOLT e
. Pt NUT Head Self Dr:lling (4 per
8- Carr Slide Lack)EKSCREW 1 4-20 X 5/ icgc
NOT7: -he location of the
X 5/4" Hex Washer Bait & 1/1-20 Hex Nosher
intermed;ote hinges is indicated
lead Self Dril,.:nc 1.2 pintermediate �tier N.i (1 per Jorhlu Bracket)
.he D by e End lock dimples at DETAIL E DETAIL F DETAIL G
&
top Of each section.
NOTE: Details on sante views Omitted for r1crity.
2.25" x 2.75" E STRUT Double end Stiles and end hardware mov be
.8 Go 70 KSI Ifinirnurn
C required orl wider or heavier ld-�.,ors.
C
23"
0 cv., 0,
FLAG BRACK�T
DETAIL K
................ q1 5173T
All- There should be a spore of Z� I No.
4
EK SCREVV 11/4" between the roller hub BOLT
of the and
1/4" X :3/4- t-iox WasNr Hecc Self the outside edge S/16 X 1 5/3" La, Bolt
- I :oller nolder which is sef by (4 :)er Fz.�Bmcket).
m e Sfi:
(I per End Stile 2 par Inie, ediat
DETAIL J 'I'le oish. nut.
B
B
BOLI &. NUT
3/$-, 1 3/4 2 3" Rl 1/420 5/8" Track Belt
a- V\ " X
John E Scales, P.E.
1/4-20 Hex Wa5her Nut
POLYURFIHANF. *FU.FO DOOR SECTION Wn.
(2 for zontal 2 for
213-%.Goh,izt, Steel sk! of 1" 3121 Fe4acte _r;v�
'Vertical Track) Corrolion.-Texas 750()7
............... 3-"
V/1 FIc,;dc P.F. # 5'737
2
Professional Eng;neer sea' provided only for
ROLLER "nf:cation, of wind load constru-tion details.
I FIL#16660.16
I ., - ...........
VEf1.7l,-A` TRACK
A SOLT &WAZSHER Thert;col wood jamb fastener., Elever,
2"N'n.1 13 as r0vized Steel
wool)-JALIB 2" Diameter lqorn;nol 01 ESCRIPTION:
BclI Nylon or' rr%ASFAICSWIViOU11.17ISwINT)T.OAI)SVC:TIOZ4,11.M)R
5/,6'X 1 5/8"L.9 Bolt & 2"O.D. . 7/16" iTcy be counter suhV to provide a Ten Ball Steel -e,,itn DESIGN PRESSURE 131.3,'-14.9 PSF A
U1. r.i Washer flut rho-ting See j-0 ---IMPACT RESISTANT
NOTE:' J.1t,bl-ket.-t be in direct c-t-1. �tt.chnl details an sh-t 3 for a Minimum Workable 111141111110 NO-IVL4)600-0I94AS4I-35Lj SHEER 30F I GEV. ID
with the 2.6 (No dri-il
tt.chl.9 jambs to the struShaft Length Shown
DETAIL H
eryrnpeJmla MODEL(S): See Sheet 3
2 3 4 6
6
7 6
1 2 3 4 5 6 7 8
FASTENERCONTINUE
MODEL NUMBERS AND IMPACT LITE OPTIONS
HEADER
PAST HEADER i
c LITE OPTIONS AVAILABLE
F MODEL NUMBERS yCARRIAGERANCH STANDARD TL 1 SMALL TL F
7 S AVAILABLE a HOUSE 2sxt2 ! 24x6
o HT 14.&2 14 SERIES j
I o 2 X 6 GRADE 2 OR BETTER SOUTHERN -- - -- --- HT_16 A 2 16 SERIES
PINE JAMBS. Bulltlin I M1,9—Mini—j Madmum AD..I
9 FastenerT ' MIN"°"" ow cenuxlaa Cem 1 Tnnslm HT_3282 32 SERIES i
SEE CHART FOR WOOD JAMB ATTACHMENT SWcture YPe lEmeodmont Dy„�,sP4anp I sPadAR I Lona
i o TO BUILDING STRUCTURE. c HT 33 8 2 33 SERIES ! 1
.._..._.._..._....-o d.9 -----I
MTh.2000 PSI Tapcon 114•wl ! 1.75' 2.50" 4.00• ii 21" 443 HT 10&2 tOSERIES ; X X _-..X.___I_--____............._
Concrete 1"OD washer j --_ ._...._....._.................._..........._...._..._........ .......
HT 12&2 12 SERIES
c Min.3000 PSI TapoDn 114•wl i 1.75 2.50" 4.00" ! 24' i 508 ': HT_60&2 60 SERIES X i
. o Concrete 1"OD washer
E OPENING ,��. Mtn.4000 PSI TaPoon 1/4"wl 1.75" 2.50' 4:00' I 24' ! 538 i HT 61 8 2_61 SERIES_-X E
HEIGHT '1�T Concrete 1-OD washer I HT 83&2_63SERIES X
o ' I Southam Pine 318•Lag w/ iS0' 1.50• 1.50' 24' ! 620 HT 64&2 64 SERIES X __.�._.-__-..
MAXIMUM ON ! 1 t/8'OD washer!
i _. _. —________ ._-______ _____
HT 70&2 70 SERIES X
CENTER SPACING Spruce Pine Fir 318"Lagw/ i 1.50" 1.50- 1.50' 22• 1 482 i HT_7182_71 SERIES X
HT 728272 SERIES X I .__ _.._...._.
1 1118'01)washer;
-- _FIRST FASTENER 4•to 10' j HT_73&2_73 SERIES X S
ABOVE THE FLOOR HT 7482 74SERIESX
NOTE:2X6 mounted to the wall must be Southern Pine Grade 2 or better. - -
HT 80&2 SO SERIES X i
c c ,
j t
HT &2 81 SERIES X i
_........__...._. .__._._._- HT-02&2&2_82 SERIES j X {
OPENING
WIDTH I HT_90&2_90 SERIES X ` D
_ HT 900 SERIES W/O LITES
�i ____—______--__.__-__383/8- 1 381
x 12 VIL
8X19' x 01..114'
L i I -
SE ION DAY LIGHT OPENING(OLO)-WIDE x TALL
u � 4 r' 0
NOTE:ALL LITES CONSIST OF INSIDE AND OUTSIDE ALUMINUM FRAMES
AND A LEXAN INSERT WITH MACHINED GROVES.
LITE I Ll FE
SEC I ION i SECTION
' I
C
L E a C
L T,
SEI ION SE TION \\\\O�-\G..SOAP,d i
NO.51737 4441
L E LIE '#
SECI ION SECkION * t ,;
II I �-p• STATE OF Au
C y %�0 ••R[OR19-"
B SEC ON ! SE TON i SE ON ��;'Ii;,alONAI�?���\ B
// 111111111
,10.^.n : te9, P,[.
q L �E L �E i LTE � 3'21 fc!aroote ,^r•:<
SE TION SE TION SE PION Crrrolito^. ?excs :5007
1s { 4-1
n: nro.•i
rlvrieo P.E. N 517J7
yy11 j i Pfessiocl Eng;n?er seo� pded only for
��--
- 1 ; I FL#16680.16 :f:coUor, of wine ;cod construction de:cils.
t
a IMPACT RESISTANT y,, 'OESCBIPTION:
' I62'IIT4I.%W,2W04:MISERIES wnNIP.ACTRESISTANT LITES&
]SECTIONS 45ECTIONS 6SECTIONS 6SEOTIONS ]SECTIONS 3SECTIONS 4SECTIONS 45ECTIONS 7SECNONS 7SECTIONS 7SECTIONS 7SECnOt ]SECTIONS )RAN SERIES WITHOUr UnSHINOLOAMUCTIONALM)II
A 5'e DESIGN PRESSURE.11.134.9 PSF A
WITH LITE SECTION AT TOP WITH LITE SECTION ANYWHERE ` OIu90Ra xps T41 Hfi p-0I W-08 31.33L sxEEr:3 DP 3 REV. D
EXCEPT THE TOP AND BOTTOM SECTION
STRUT CONFIGURATION 3=Ot)®n (OereORO: 417/14 j6Rllteaei: Mvs —�—
®cW1TIxn4 'MODEL(S): See Shcet 3
1 23 4 5 6 7 8
3121 Fairgate Dr.
Carrollton TX 75007
John E. Scates, Professional Engineer office (972)492-9500 1 fax(972)492-0077
August 19, 2015
Haas Door
Mark Schweitzer
320 Sycamore St.
Wauseon, OH 43567
Re: Evaluation for Florida FL-16660
To Whom It May Concern:
At the request of Haas Door, I have reviewed the drawings and tests listed below. These tests
were conducted at Haas Door Company Test Lab according to ANSI/DASMA 108-05 and
ANSI/DASMA 115-05 test procedures. The pressures listed on the drawings are direct results of
these tests or conservative engineering rational analysis from the actual tests, except that no
extrapolation of impact pressures were used. I have concluded that the construction shown on
these drawings comply with the structural requirements of the 5th edition (2014) of the Florida
Building Code. I certify that I meet the requirements of "independence" as detailed in Florida
Statutes.
Drawings
These products were tested to DASMA 108(static)
WL-0600-0110-08-21-24L RevC HT 600 Series 9'-2" wide, +21.3/-24.1 PSF
WL-0600-0110-08-25-28L RevD HT 600 Series. 9'-2" wide, +24.8/-28.0 PSF
WL-0600-0194-08-22-24 Rev- HT 600 Series 16'-2" wide, +21.8/-24.3 PSF
WL-0600-0194-08-22-24L Rev- HT 600 Series 16'-2" wide, +21.8/-24.3 PSF
WL-0600-0194-08-24-27L RevD HT 600 Series 16'-2" wide, +23.9/-26.7 PSF
WL-0600-0218-08-20-23L RevC HT 600 Series 18'-2" wide, +20.4/-22.7 PSF
WL-0600-0218-08-24-27L RevE HT 600 Series 18'-2" wide, +23.9/-26.7 PSF
WL-2000-0110-08-21-24L RevC PAN 2000 Series 9'-2" wide, +21.3/-24.1 PSF
WL-2000_0110-25-281- RevD PAN 2000 Series 9'-2" wide, +24.8/-28.0 PSF
WL-2000-0110-35-39 RevC PAN 2000 Series 9'-2" wide, +35.0/-39.0 PSF
WL-2000-0194-08-18-20 Rev- PAN 2000 Series 16'-2" wide, +18.3/-20.4 PSF
WL-2000_0194=08-18-201- Rev- PAN 2000 Series 16'-2" wide, +18.3/-20.4 PSF
WL-2.000-0194-18-20L Rev- PAN 2000 Series 16'-2" wide, +18.3/-20.4 PSF
WL-2000=0194-08-20-23t RevC PAN 2000 Series 16'-2" wide, +20.4/-22.7 PSF
WL-2000-0194-24-27L RevD PAN 2000 Series 16'-2" wide, +23.9/-26.7 PSF
WL-2000-0218-08-20-23L RevC PAN 2000 Series 18'-2" wide, +20.4/-22.7 PSF
WL-2000-0218-24-27L RevE PAN 2000 Series 18'-2" wide, +23.9/-26.7 PSF
Evaluation for Florida FL-16660
These products were tested to DASMA 108(static) and DASMA 115 (impact):
WL-0600-0.110-08-41-46 RevB HT 600 Series 9'-2" wide, +41.1/-46.4 PSF
WL-0600.0110-08-41-46L RevD HT 600 Series 9'-2" wide, +41.1/-46.4 PSF
WL-0600-0194-08-31-35 RevB HT 600 Series 16'-2" wide, +31.3/-34.9 PSF
WL-0600-0194-08-31-35L RevD HT 600 Series 16'-2" wide, +31.3/-34.9 PSF
WL-0600-0194-08-37-42 RevB HT 600 Series 16'-2" wide, +37.4/-41.7 PSF
WL-0600-0218-08-30-34 RevC HT 600 Series 18'-2" wide, +30.0/-33.9 PSF
WL-0600-0218-08-30-34L Rev- HT 600 Series 18'-2" wide, +30.0/-33.9 PSF
WL-2000-0110-08-35-39 RevB PAN 2000 Series 9'-2" wide, +35.0/-39.0 PSF
WL-2000-0110-41.46 RevB PAN 2000 Series 9'-2" wide, +41.1/46.4 PSF
WL-2000-0194-08=31-35 RevB PAN 2000 Series 16'-2" wide, +31.3/-34.9 PSF
WL-2000-0194-31.35 RevC PAN 2000 Series 16'-2" wide, +31.3/-34.9 PSF
WL-2000-0194-37-42 RevB PAN 2000 Series 16'-2" wide, +37.4/-41.7 PSF
WL-2000-0218-08-30-33 RevB PAN 2000 Series 18'-2" wide, +30.0/-33.1 PSF
WL-5000-0110708-40-45 RevD HT 5000 Series 9'-2" wide, +40.0/-45.0 PSF
WL75000-0110.08.40-45L RevC HT 5000 Series 9'-2" wide, +40.0/-45.0 PSF
WL-5000-0194-08-3.1-35 RevD HT 5000 Series 16'-2" wide, +31.3/-34.9 PSF
WL-5000-0194-08-31-35L RevC HT 5000 Series 16'-2" wide, +31.3/-34.9 PSF
WL-5000-0218-08-30-34 RevC HT 5000 Series 18'-2" wide, +30.0/-33.9 PSF
WL-50000218-08-30-34L Rev- HT 5000 Series 18'-2" wide, +30.0/-33.9 PSF
Note: The drawing titles above are simply descriptive, and do not represent any limitation on
the sizes and pressures. Each drawing contains a table with the full sizes vs. psf ratings.
Test Reports
Drawing HAAS Report#
WL-0600.-0110-08-21-24L Test 052714006 (DASMA 108)
WL-0600.0110-08-25-28L Test 070615014 (DASMA 108)
Test 070615015 (DASMA 108)
Test 020314001 (DASMA 108)
WL-0600-0110-08-41-46 Test 033114001 (DASMA 108) 033114002 (DASMA 115)
WL-0600-0110-08-41-46L Test 033114003 (DASMA 108) 033114004 (DASMA 115)
WL-0.600-0194-08-24-27L Test 020314008 (DASMA 108)
WL-0600-0194-08-31-35 Test 033114009 (DASMA 108) 033114010 (DASMA 115)
WL-0600-0194-08-31-35L Test 033114011 (DASMA 108) 033114012 (DASMA 115)
WL-0600-0194-08-37-42 Test 052714014 (DASMA 108) 052714015 (DASMA 115)
WL-0600.0218-08-20-23L Test 070615002 (DASMA 108)
Test 070615003 (DASMA 108)
2
Evaluation for Florida FL-16660
WL-0600-0218-08-24-27L Test 020314009 (DASMA 108)
WL-0600-0218-08-30-34 Test 020314011 (DASMA 108) 020314018 (DASMA 115)
WL-0600-0218-08-30-34L Test 020314011 (DASMA 108) 020314018 (DASMA 115)
Test 070615004 (DASMA 108) 04:0615005 (DASMA 115)
Test 070615006 (DASMA 108) 040615007 (DASMA 115)
WL-0600-0194-08-22-24 Test 070615019 (DASMA 108)
WL-0600-0194-08-22-24L Test 070615011 (DASMA 108)
Test 070615013 (DASMA 108)
WL-2000-0110-0821-24L Test 052714003 (DASMA 108)
WL-2000-0110-08-35.-39 Test 070615016 (DASMA 108) 070615017 (DASMA 115)
WL-2000-0110-25-281- Test 020314004 (DASMA 108)
WL-2000-0110-35-39 Test 020314003 (DASMA 108)
WL-2000-0110-41-46 Test 033114005 (DASMA 108) 033114006 (DASMA 115)
WL-20.00-0194-08-20-23L Test 052714011 (DASMA 108)
WL-2000-0194-08-31-35 Test 052714009 (DASMA 108) 0527140106 (DASMA 115)
WL-2000-0194-24-27L Test 0203.14005 (DASMA 108)
WL-2000-0194-31-35 Test 020314006 (DASMA 108) 020314015 (DASMA 115)
WL-2000-0194-37-42 Test 033114007 (DASMA 108) 033114008 (DASMA 115)
WL-2000-0218-08-20-23L Test 070615001 (DASMA 108)
WL-200O.-0218-08-30-33 Test 052714016 (DASMA 108) 052714017 (DASMA 115)
WL=2000-0218-24-271- Test 020314012 (DASMA 108)
WL-2000-0194-08-18-20 Test 070615010 (DASMA 108)
WL-2000-0194-08-18-20L Test 070615009 (DASMA 108)
WL-2000-0194-18-20L Test 070615008 (DASMA 108)
WL-5000-0110-08-40-45 Test 020314002 (DASMA 108) 020314013 (DASMA 115)
WL75000-0110-08-40-45L Test 052714004 (DASMA 108) 052714005 (DASMA 115)
WL-5000-0194-08-3.1-35 Test 020314007 (DASMA 108) 020314016 (DASMA 115)
WL-5000-0194-08-31-35L Test 052714012 (DASMA 108) 052714013 (DASMA 115)
WL-5000-0218-08-30-34 Test 020314010 (DASMA 108) 020314017 (DASMA 115)
WL-5000-0218-08-30-34L Test 070615004 (DASMA 108) 040615005 (DASMA 115)
Test 070615006 (DASMA 108) 040615007 (DASMA 115)
Tests were conducted at Haas Door Company Test Lab in Wauseon, OH. This facility was
independently accredited per ISO/IEC 17025:2005 by Laboratory Accreditation Bureau (Certificate
L2378)to perform these test procedures at the time of testing. I personally witnessed the testing.
Static pressure testing was conducted in accordance with ANSI/DASMA 108-2005 (and -2012).
Large Missile impact and cycling tests were conducted in accordance with ANSI/DASMA
115-05.
3
Evaluation for Florida FL-16660
Installation
Anchorage Requirements:
The door drawings include means to attach the doors to the building structure as detailed
on Sheet 3 of each drawing using an added 2x6 to the face of the garage wall.
The direct mounting of door track on top of drywall or other non structural material is
outside of the scope of this wind.load evaluation.
This Evaluation Report does not address design of the wal!Aambs themselves. These
attachment drawings only illustrate common means to attach the jambs to the wall. Walls
and Jambs should be designed (by others) to withstand the loads imposed by door onto
the building.
Model Description
In each. family of doors, the weakest or thinnest skin product was tested to prove the
entire family line. Thus, all of these door model variationsare approved for each family of
the drawings:
The HT 600 family are steel polyurethane sandwich doors
These variations are included in this approval:
1-3/8"overall thickness: 610, 612, 614, 616, 632, 633,660 (tested), 661, 663, 664,
670, 671, 672, 673, 674, 680 (tested), 681, 682, 690.
9xx American Tradition Series (exterior overlays) (tested)
1-3/e overall thickness: 710, 712, 714, 716, 732, 733,760, 761,763, 764,
770, 771, 772, 773,774, 780,781, 782, 790.
9xx American Tradition Series(exterior overlays)
2."overall thickness: 2010, 2012, 2014, 2016, 2032,2033, 2060, 2061,2063, 206.4,
2070, 2071, 2072, 2073, 2074, 2080, 2081, 2082, 2090
3 overall thickness: 810, 812, 814, 816 (tested),832, 833, 860, 861, 863,864,
870, 871,872, 873,874,880,881, 882, 890
The HT 5000 family are aluminum faced polyurethane sandwich doors
The various model numbers.listed on the drawings are included in this approval:
1-3/8"overall thickness: 5610, 5612, 5614, 5616, 56.60(tested), 5670, 5680 (tested)
1-3/4"overall thickness: 5710, 5712, 5714, 5716, 5760, 5770, 5780(tested)
2"overall thickness: 5210, 5212, 5214, 5216, 5260, 5270, 5280
3"overall thickness: 5810, 5812, 5814, 5816, 5860, 5870, 5880
4
Evaluation for Florida FL-1.6660
The PAN 2000 family of doors are Pan doors
These variations are included in this approval:
25 gage: C2500, R2560 (tested), R2561, R2571, R2572, R2580, R2581, R2582
24 gage: C2400, C2410, R2410, C2460, R2460, C2461, R2461,
C2471, R2471, C2472, R2472, C2480, R248.0, C2481, R2481, C2482, R2482
20 gage: C2000
Limitations
The drawings cited above are an explicit part of this evaluation report. The text of this
report does not attempt to address all design details, but relies upon the illustrations and
text of these drawings and instructions as well.
Each door should be chosen based on the "psf" requirement determined for a specific
installation or locale.
The maximum door width approved with this report is 22'-02".
The. maximum door height approved with this report is 16' nominal.
The horizontal track may be reinforced with an angle as needed to support the door
weight. The construction of the horizontal track, including the track thickness, is
determined by Haas Door and does not affect this windioad evaluation.
The rated pressures may not be achieved unless the door is held closed during the wind
event. Both tracks must be engaged with a lock (right and left side), or alternately an
electric operator attached to the door prior to the wind event.
Someof these doors have been tested to Large Missile Impact requirements per
ANSI/DASMA 115. However, they have not been fully evaluated for use in the Florida High
Velocity Hurricane Zone (HVHZ).
No.51737 r
Digitally signed by,
John EScates; P.E.
STATE Of #4-
Date:
4-Date: 2015.08.19 09:48:26 -05'00'
N
John E. Scates, P.E. //�SSIONAL
FL PE#51737
5