HomeMy WebLinkAboutProduct Approval 21UILUIL15 "'ULLU till1111e Pan 2 of 2
Product Approval Method Method I Option D
Date Submitted 04/22/2015
Date Validated 04/23/2015
Date Pending FBC Approval 04/25/2015
Date Approved 06/23/2015
Summary of Products
FL# Model,Number or Name Description
10674.1 Owens Coming Asphalt Roofing 3-tab,4-tab,5-tab,laminated,starter and hip&ridge
Shingles and Starters shingles
Limits of Use Installation Instructions
Approved for use in HVHZ:No FL10674 R10 II 2015 04 FIPlAC ER OC ASPHALT
Approved for use outside HVHZ:Yes SHINGLES FL�10_67A_R11_0.pd_f
Impact Resistant.N/A Verified By: Robert 3.M. Plieminen PE-59166
Design Pressure:N/A Created by Independent Third Party:Yes
Other:Refer to ER,Section 5. Evaluation Reports
FL10674 R10 AE 2015 04 FINAL ER OC ASPHALT
SHINGLES_FL10L6 -& p f
7410�A_
Created by Independent Third Party:Yes
_j
Contact U 1940 North Monroe Street,Tallahassee Ft 12390 Phone:850-487-1824
The State of Florida is an AAtEEO employer.CcDvrioht 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send
electronic mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.4$7.1395.*Pursuant to
Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if
they have one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to
supply a personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under
Chapter 455,F.S.,please click here
Product Approval Accepts:
M 0
�ccurilv
I Ullq
http://www.floridabuildino,.org/pr/pr_app_dti.aspx?param=wGENJXQw1DgtBNb.EY5 V%2... 9/15/2015
EXTERIOR RESEARCH/&DESIGN,LLC'
Certificate of Authorization#9503
'
353 CHRISTIAN STREE� UN[T#l3
��� �
OXFORD, CT O6478T��N
PHONE: (2O3)Z62-9245
FAX:(2O3)Z62'9243
EVALUATION REPORT
Owens Corning Evaluation Report Q3794O.D2.12-RS
One Owens Corning Parkway FL10674'RlO
Toledo,OH4]§S9 Date mfIssuance:02/06/2012
Revision 5: O4/22/ZQ15
6coro
This Evaluation Report is issued under Rule 61G20'3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida.The documentation submitted has been reviewed by Robert Nieminen, P.E.for
use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products described
herein have been evaluated for compliance with the 5'h Edition(2014)Florida Building Code sections noted herein.
Dcscmpnow: Owens Corning Asphalt Roof Shingles
Lxusuws: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report isvalid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes,or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product changes or the
referenced Quality Assurance documentation changes. Thnity|ERD requires a complete review of this Evaluation Report
relative tnupdated Code requirements with each Code Cycle.
Aovcnnscxxemr: The Evaluation Report number preceded by the words "ThnitylERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.
|mspscnom: Uponrequest, acopyofthisentireEva(uatinnReportshaUbeprovidedtntheuserbythemanufacturerori1s
distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists ufpages 1through 6.
Preparedby: .
�ober�J'KA,0/em�oeo, P.E.
P.E.P'E' ' m^u�"/�s�/"���:="°"m"�m�n"��m�*��
��
on oo.This does not serve".=electronically signed
Florida Registration No.59os6,Florida DCA xwE198o document.Signed,sealed mmcop^"have been transmitted°o=
Product Approval Administrator and mthe named client
CERTIFICATION oFINDEPENDENCE:
I. Trinity|sRD doe, not have, nor does it intend to acquire or will it acquire, x financial interest in any company manufacturing or
distributing products itevaluates.
l TrinityJERD is notowned,operated orcontrolled byany company manufacturingor distributing products it evaluates.
3, Robert Nirminen,P.E.does not have nor will acquire,a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen' P.E. does not have, nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
5. This isa building code evaluation. Neither Trinity|EnD nor Robert mieminen, P.E. are, in any way, the Designer ofRecord for any
project on which this Evaluation Report,,r previous versions thereof,is/was used for permitting or design guidance unless regained
specifically for that purpose.
)
.
`
`
����
��
� U����N 1)"
�
ROOFING SYSTEMS EVALUATION:
1 SCOPE:
Product Category: Roofing
Sub-Category: Asphalt Shingles
Compliance Statement: Owens Corning Asphalt Roof Shingles,as produced by Owens Corning,have demonstrated compliance
with the following sections of the Florida Building Code and Florida Building [ode, Residential Volume through testing in
accordance with the following Standards. Compliance is subject tothe Installation Requirements and Limitations/Conditions of
Use set forth herein.
2' 5r«moxnos:
Section Property Standard Year
1507.2.5,R905.2.4 Physical Properties ASTM D3462 zuog
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D3161 zuoy
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D7158 zmm
3' RcrcnsmCES;
�n � Examination Reference Date
uLLLC(csneazs) Physicals mWind Resistance File nmsa'Vol.3 oVzs/zmm
uLLLC(ccxgozs) Physicals mWind Resistance 20120516'x2*53 05/16/2012
uLLLC(rn9sm) Physical Properties 06cA20263 04/18/2006
uL Luc(TSTsmm) Wind Resistance zzcA34308 02/18/2012
oLLLC(rsTsazu) Physicals mWind Resistance 4786093137 02m1/201*
oLLLC VSTaszm> Wind Resistance 478612e532 02/10/201*
uLLLC(cnyszu) Physical Properties Classification letter 02/13/2014
m/am|'uaue(csxzsyz) pocxvxzCompliance va,/ovswoA, vnnom
uLLLC (uuAyaos) Quality Control Service Confirmation,nmsa sxn.08/20/2017
4. PRODUCT DESCRIPTION:
4.1 Asphalt Shingles:
4.1.1 Classic*and Supreme'are fiberglass reinforced,3-tab asphalt roof shingles.
4.I.2 Berkshire'are fiberglass reinforced,4-tabasphalt roof shingles.
4.1.3 oevonshireT'are fiberglass reinforced,s+abasphalt roof shingles.
4.1.4 Duration~, TmDeOnitio�~ Duration', Duration' Premium [uo|' Truoe[in�ion° Duration' Designer [n|o, Collection,T,uDeMnition'OakridQe 'Oakridge'and VVeathe,Guand~Hpare�hequ|asse|nforce�|amimmedaspha�mofsNngles.
4.2 Berkshire' Hip & midge Shing|eo. High Ridge, Hip & Ridge with Sealant, VveatherGua,d^ HP Hip & Ridge shingles,
ProEdge Hip & Ridge Shingles and DuraRldge— Hip & Ridge Shingles are fiberglass reinforced, hip and ridge asphalt
roof shingles.
4.3 Starter Strip Plus and Starter Shingle Roll are starter strips for asphalt roof shingles.
S. L/mvnvnmws:
5.1 This i, a building code evaluation. Neither Thnby/Enonor Robert Nieminen, p.Eare, inany way, the Designer of
Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report isnot for use iothe oVHZ.
5.3 Fire Classification is not part ofthis Evaluation Report;refer to current Approved Roofing Materials Directory for fire
|
ratings ofthis product.
�
5.4 Wind Classification:
�
5.4.1 All Owens Corning shingles noted herein are Classified in accordance with pgCTab|es I507.2.7.1 and R905I6.1 to
ASTM D3161,Class F and/or ASTM D7158,Class H,indicating the shingles are acceptable for us in all wind zones up to
V.^=IS0mph(v,*=z84mph). Refer tuSection 8for installation requirements u»meet this wind rating.
5.4.2 All Owens Corn!nohip&ndgeshingles and 5to�erStrip Plus nmedheeinae[|oa�edinaoo,donoexvhhpBCTables
1sO7.z7.land RyOSJ.b.ztvASTM o3zo1,Class F, indicating the shingles are acceptable for usinall wind zones vpto
Vnd=150 mph(Vul,=194 mph). Refer to Section 6 for installation requirements to meet this wind rating.
-
Exterior Research and Design,LLC. Evaluation Report osre4ouz.12-ns
o,«fic"mp*A"th"azauonx95m pu0674-nzo
Revision s:o4/22/2ozs
Page zms
`
—
� '��K�
��8 �0 U U `»~'^��
5.4.3 Classification by ASTM o7158applies to exposure category B or C and a building height of 60 feet nrless. Calculations
by a qualified design professional are required for conditions outside these limitations. Contact the shingle
manufacturer for data specific toeach shingle.
5.4.4 Refer to Owens Corning published information on wind resistance and installation limitations.
5.5 All products in the roof assembly shall have quality assurance audit in accordance with the Florida Building Code and
F.A.cRule 6IG2Oa.
b. |msnvcuT/om:
6.1 undedavment:
6I.1 Underlayment shall be acceptable to Owens Corning and shall hold current Florida Statewide Product Approval,or be
Locally Approved per Rule 61GZO-3'per Fo[Sections 15O7.23,1So7l4orn9Vs2.3.
6.2 Asphalt Shingles:
6z.1 Installation ofasphalt shingles shall comply with the manufacturer's current published instructions, using minimum
four(4)nails per shingle in accordance with FBC Sections 1507.2 or R905.2,with the following exceptions:
> Berkshire'shingles require minimum five<5>nails per shingle.
� vVeathepsuand"Hpshingles require minimum six(a)nails per shingle.
> D:vunshire'shingles require minimum six(6)nails per shingle.
)�- Starter Strip Plus requires minimum five(5)nails per strip,
Refer to Owens Corning published information on wind resistance and installation limitations.
oIl Fasteners shall be in accordance with the manufacturer's published requirements, but not less than F8C 2507.2.6 or
R905.I5. Staples are not permitted.
6.2.4 Where the roof slope exceeds 21 units vertical in 12 unit` horizontal, special methods of fastening are required.
Contact the shingle manufacturer for details.
6.3.5 Minimum Nailing—Oaa,icO&Supnemo:
FNormal Mansard or Area pare Normal Mansard or Area para
Wind Areas High Wind desvenes y Wind Areas High Wind desvanas y
Area pare vientos normajes Areas vientos fuerreg Area para vientas normajes Areas vientas fuartas
1-121
5"Ex�osure
6.2.6 Minimum Nailing—oedohi,eO:
-------------
etenor Research and Design,LLC. Evaluation Report o37m0.c2.12-RS
c*tiftc*eofAothmizamonuym3 pu0674-nIo
Revision 5:04/22/2015
Page smo
__
R fi`-4 i D
6.2.7 Minimum Nailing—DevonshireTI:
Nail
T
Plaits
ails
Ten V Spots of Asphalt Roof Cement
6.2.8 Minimum Nailing—DurationO,TruDefinition"Duration, DurationO Premium Cool&TruDefinition'Duration'Designer
Color Collection:
4 Nall Pattern 6 NailWzlw,DW,,�
Esquema do 4 clavos taIW,rn S'llObt,
Pattern
Esquerna
Su*.Iaila fastening area width s V c.1
�
Area dedawsSurella!P ff J
o a
-wx I;,
Sur'NA,
tai �o
area 2, x
12" 12- V \T
V.
71
59V'Exposure
"
Nails 5'1, EAPOlUte,
6'Z pulg.do exposici6ir Claws S;ipri.lg.de axpm.66n
5W'Exp%ute flail, 5%."Ext-osuro
5i ping.de.eApoiJk6tin Clown 15 i 1w.1g.do exM51(ion
6.2.9 Minimum Nailing—TruDefinition'OakridgeO,Oakridge":
4 Nail Pattern 6 Hail Pattern
Esquema con 4 clavos Esqueina con 6 clavos
12-
12.
5 SIB!'F,.,poure
tbiLs 6 519"Exposure Nails
ap osicid.?do 6 1578 p&g. Clava Exmsicl6n do 6 61Spuig. 5 5"'T,Expotme Clam, 5 519'Exposure
Eypo*i6n,do S5518puly. Evposici6n de 55518ping.
6.2.10 Minimum Nailing—WeatherGuardO HP:
--1 Inul
6111do w%w
VbftFss4anerlatund
14
Csnv w3 to*ws do I#KMR
TMKq*Nd)Lbw
Exterior Research and Design,LLC. Evaluation Report 037940.02.12-R5
Certificate of Authorization#9503 FU0674-RI0
Revision 5:04/22/2015
Page 4 of 6
TRIN FI(IERD
6.3 Hip&Ridge Shingles:
6.3.1 installation of Berkshire Hip and Ridge Shingles, High Ridge, Hip & Ridge with Sealant, WeatherGuard HIP Hip and
Ridge Shingles and ProEdge Hip&Ridge Shingles shall comply with the manufacturer's current published instructions,
using four(4)nails per shingle. Installation of DuraRidgell Hip&Ridge Shingles shall comply with the manufacturer's
current published instructions,using two(2)nails per shingle. Refer to Owens Corning published information on wind
resistance and installation limitations,including the use of hand-sealing for wind warranties.
6.3.2 Fasteners shall be in accordance with the manufacturer's published requirements,but not less than FBC 1507.2.6 or
R905.2.5. Staples are not permitted.
6.3.3 Minimum Nailing—Berkshire'Hip&Ridge and High Ridge:
Fig.I aV Fig.2 Toj.View sid'vim
Z1
Was
T'
Pirie
&7—,
Y Y
�Xi1nSI1rC
N"
6.3.4 Minimum Nailing—Hip&Ridge with Sealant:
Item Fig. 2 - High W W FastOning Paten]
K Nails)
Trill-!5
Shingk-- - 1,
aDisc�ag-d 2 F 20
Excess
Lkd-
2'
Sea PaRit
Strip
T
Fa ste n i rog S
C-e-
12
6.3.5 Minimum Nailing—WeatherGuardO HP Hip and Ridge:
Fig.C Hip&Ridge Shingle Fastening
Fig,AToplliw;
.'7
Provalling 1.11nd Z
e f SK,
N, >
A
Exterior Research and Design,LLC Evaluation Report 037940.02.12-RS
Certificate of Authorization#9503 FL10674-RIO
Revision 5-04/22/2015
Page 5 of 6
RTg
N ERD
6.3.6 Minimum Nailing-ProEdge Hip&Ridge Shingles:
Prevailing Standard
Wind Direction Sealant StripFastening
Patterst
6"Exposure
Sealant
Fasten Th 7' " 6"Expos e
Cover Exposed
Fasteners with
<Roof Cement 120
6.3.7 Minimum Nailing—DuraRidge",Hip&Ridge Shingles:
Note: The drawings below pertain to minimum, as-tested attachment requirements. Refer to Owens Corning
published installation instructions for their minimum requirements.
Pr4ia5i1G 1'{tai Dir�W:aa' Top V*w
Giraaion+.{'_nLnaaNdJttint Vu.2 en plan
6irocdendal ritnto prad:inCtam a r{i' Vntasuparo-_r i 1*�.
Hai
s- 4ucas Corrtiats Sor�t3si1'
trl-
1LY1400S`•,,+ I I
�t70tn c v I�
7. LABELING:
7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC Table
1507.2.7.1/R905.2.6.1.
8. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product.
9. MANUFACTURING PLANTS:
Contact the named QA entity for information on which plants produce products covered by Florida Rule 9N-3 QA requirements.
10. QUALITY ASSURANCE ENTITY:
UL LLC—QUA9625;(414)248-6409;karen.buchmann nul.com
END OF EVALUATION REPORT-
Exterior Research and Design,LLC. Evaluation Report 037940.02.12-R5
Certificate of Authorization#3503 FL10674-R10
Revision 5:04/22/2015
Page 6 of 6